How to avoid restart weblogic after I modify EJB implementation class?

I am sure I redeploy my application after I modify EJB implementation class. It
is unacceptable to restart weblogic server if I changed some EJB . Is there any
way to avoid this?
Thanks!

I would open a case with BEA support. I would take a look at it, but I'm going
on vacation :(
pat
"CottonXu" <[email protected]> wrote:
>
My WLS version is 7.0 and I use weblogic console to redeploy the entire
application.
I am sure that EJBs are not in classpath.
What should I do ?
"Pat Bumpus" <[email protected]> wrote:
Hi,
I haven't seen this behavior. My EJBs seem to redeploy and pick upthe
EJB bean
changes. Make sure that your EJB is not in the system classpath that
could cause
this problem.
What version of WLS?
How are you deploying the EJB?
pat
"CottonXu" <[email protected]> wrote:
I am sure I redeploy my application after I modify EJB implementation
class. It
is unacceptable to restart weblogic server if I changed some EJB .
Is
there any
way to avoid this?
Thanks!

Similar Messages

Does anyone know how to avoid grainy files after editing in Photoshop CS6 (Mac)

We have come across a problem using Adobe Photoshop CS6 and Illustrator CS6 on a MAC. We use Illustrator CS6 for putting together the graphics and use Photoshop CS6 for editing. When we save the image in full res and browse the image - the image looks grainy both on a Mac and a PC. Has anyone else come across a similar problem and if so do you know how we can solve this problem?
Paul

Are you "Placing" the image files? What format are they saved in ( i.e., .tiff, .psd, .jpg, .eps )?

HT4623 How to avoid "restoring" iPAD after attempt to update to latest version of iOS 7?

After I downloaded a new app to my iPad from my MacBook Pro, iTunes message asked me to update to latest version (iOS 7 already installed). Process took longer than expected and message requests to "restore the iPAD." Is there anyway not to do that?

Are you a developer? If so, post this question in the developer forum. If not, why are you using a beta version of ios 7? You need to restore your device as NEW in itunes and update the current software version.

Make WebLogic use a JNP RMI implementation

WebLogic uses normally a proprietary protocol called T3 in it's RMI implementation, but I would like to connect to an application server that is running on JBOSS, which the protocol is JNP. When I try to connect I'm getting a java.net.UnknownHostException: Unknown protocol: 'JNP'.
Does anyone know how can I make WebLogic use a JNP RMI implementation instead?
Thanks in advance,
fmsoares

You need to use RMI-IIOP to connect to JBoss from WebLogic.

How can i avoid restarting tomcat server when servlet is modified?

please advice me that how can i avoid restarting the tomcat server, whenever a servlet file is modified in my application. is their any way ?

No probs. Here's how I do things...
1. Install tomcat as normal (e.g. I install to C:\Apps\jakarta-tomcat-5.5.4)
2. Create a webapps directory in your eclipse project with the following directory structure
MyEclipseProject
   - src
   - conf
   - webapps
      - MyApplication
         - META-INF
         - WEB-INF
            - classes
            - lib
            - pages3. Set the project's output folder (e.g. bin folder) to webapps/MyApplication/WEB-INF/classes
4. Put all your jar files in the lib directory
5. Put JSPs / HTML in the pages directory (you may also want to create additional directories for TLDs, config files etc)
6. Ensure your web.xml is in the WEB-INF directory
7. Although it isn't essential I create a context.xml file and store it in META-INF, e.g.
<Context reloadable="true">
    
     <WatchedResource>WEB-INF/web.xml</WatchedResource>
     <WatchedResource>WEB-INF/conf/struts/struts-config.xml</WatchedResource>
     <WatchedResource>WEB-INF/conf/struts/tiles-defs.xml</WatchedResource>
     <WatchedResource>WEB-INF/conf/struts/validation.xml</WatchedResource>
</Context>I use this to set monitored resources that will trigger an automatic appliation reload and to configure JAAS (not shown). See the Tomcat documentation for additional information.
8. In the 'conf' directory I create a server.xml file used to configure Tomcat (you can copy the one from your <TOMCAT_HOME>/conf/server.xml).
After copying the file change appBase attribute in the host element to be the full path to the webapps directory. You can also change the HTTP and HTTPS ports if you wish
9. Download and install the Tomcat Launcher plugin from Sysdeo.
10. In Eclipse's Preferences menu you will see a new entry for Tomcat. Click this then
a. Set your Tomcat Version
b. Set your Tomcat Home
c. Set "Context declaration mode" to server.xml
d. Set the configuration file to the full path to your server.xml file created in step 8
On the "Advanced " sub page select all relevant projects to add to the Tomcat classpath
On the "JVM Settings" page add all the jars in your WEB-INF lib directory to the class path
On the "Source Path" page select all relevant projects
Now if you start Tomcat using the Tomcat icon, you will be able to remote debug your application. If you change web.xml (or any other file in your context.xml watched resources) it will automatically reload. Any changes to JSPs will automatically be picked up (providing your tell your browser not to use the page in cache - e.g. CTRL+F5 in IE)
There are some limitations that I'm still working on however. Primarily that I haven't included the Tomcat Manager application in my webapps directory, so Sysdeo cannot perform a reload. This means that if I change a source file, and eclipse auotmatically rebuilds, Tomcat doesn't pick up the change unless I either change a watched resource file (e.g. web.xml) or stop and restart Tomcat.
There's no reason why this can't be fixed, I just haven't got round to it yet.
I'm sure there are lots of other (probably better) ways of achieving the same thing. This was the first method I tried and it worked, so I stuck with it. I'm not a Tomcat config guru and I'm sure other forum users could provide some improvements should they wish.
Post if you get into trouble, however I won't be able to respond until next week.
Cheers,
Steve

How to avoid BPEL process deployment after server restart

Hi,
Message flow in my application is as below
BPEL1 --> ESB --> BPEL2
After every server restart the ESB is failing to invoke a perticular operation of BPEL2 service. All other operations of BPEL2 are working fine.
We are redeploying the BPEL2 proccess everytime the server restart happens to fix this issue. As a temporary fix, we are trying to bypass the ESB and directly invoke BPEL2 from BPEL1, but not sure if this solution works.
Can someone please suggest me as to how to avoid redeployment of the BPEL2 process?
Please let me know incase any additional information is required.
Thanks in advance.
Regards,
Manoj
Edited by: user11290555 on Jun 20, 2010 3:18 PM

Hi,
try the SOA forum. This here is for JDeveloper and ADF related questions
Frank

How avoid restart after installing JMF ?

if i make my audio and video chat using JMF
is it necessary to install JMF and make restart on client pc?
i don t want to disturb user
is it away for avoiding installing all JMF or just avoid restarting after installation
really need the answer
thanks

You dont have to restart your computer. You can just copy all of the JMF-dlls to your application folder and use the file in the classpath. It depends what type of application you create. If you have an applet the dlls have to be copied to one of the PATH-Folders of your system (eg windows/system). For a standalone-app just have the dll's in your app folder and include . in your classpath.
To be able to use video/audio-devices at startup you have to call the corresponding Auto-Classes of jmf.jar like new VFWAuto() once to register all available devices in the jmf registry.
How this corresponds to the JMF-license is however a different story. I dont know if you are allowed to circumvent the JMF-Installer this way. But you could inform the user that a restart is not necessary before starting the JMF-Installer....

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

You can use any computer but your data will be lost if you have no backup.

ITunes 10.5.3 restarts itself after closing the program. How do I fix this?

iTunes 10.5.3 restarts itself after closing the program. How do I fix this?
Windows 7 64bit Ultimate
iTunes 10.5.3 64bit

I've had this problem on my Windows XP for years. it's been around, unsolved, or no solutions in these forums.
It keeps reminding me why Apple will never be the primary office computer company. Anyone running a business cannot have software running that will not behave, won't shut down, or behaves without any explanation, and this problem has no explanation, or solution that I can find except to use task manager to kill the process and only use iTunes when I'm expecting to shut down or kill the process.

After adding MIME type in sharepoint server, file click opens a popup for file to open as readonly or edit, How to avoid this popup

After adding MIME type in sharepoint server,
File click opens a popup for file to open as readonly or edit, How to avoid this popup
Popup Details:
You are about to open --> File Details
How would you like to open --> ReadOnly, Edit
OS: Window 7
Jagadish

this is likely caused by the library requiring check-out/check-in. For a file to be editable, the file needs to be checked out.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

After writing into serial port, the same message gets bounced back into the Inqueue also. If anyone know how to avoid this, please rpely.

Hi,
After writing into serial port, the same message gets bounced back into the Inqueue also. If anyone know how to avoid this, please reply.
Thanks,
Ganesh

If you disconnect the cable going to the serial device, do you still get the echo? If so you have something going on in the port setup. If disconnecting the cable stops the echo then the device you're talking to is doing it - which would be my bet. One thing to check is whether this might not be normal operation. I have seen devices that if a command was successful, it simply echo'd back the command string you had sent. Also many serial devices have setting for specifying whether they are to echo commands.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

HT3180 How do I restart the Apple TV after completing the 11/10/13 update?

How do I restart Apple TV after updating it tonight, 11/10/13?

Your Apple TV should restart itself after an update or you should be able to do this from settings. If you aren't able to do either of these....
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

How to attach custom code after invoice save/modify

Hi to all,
i should solve techically this problem.
I have an invoice document.
After the modify/save of the invoice document, i should start a custom procedure that, line by line, read the invoice document just saved, and save the net value of each position in a custom table.
I cannot simply read the whole net amount of the document, because only positions that fulfill some conditions must be added to the custom table.
On the second step, i should modify that document and create another invoice document whith the positions that doesen't fulfill the conditions above. The same check (and the same code) must be executed on invoice modify also.
Exit, BADI, business transaction events, workflow (that i never use), modify standard trx code (but the customer doesen't want).
These are the methods that i know. I've already searched for exit, BADI and BTE (event 00001030 for example), but nothing of these seems help me on solve the problem, because they all start before the document is saved on the database (so i don't have the document number and the effective data saved).
Any good suggestions/hints/links/solutions etc... will be surely rewarded.
Thx a lot
Andrea

Hi again,
i was quite sure that the problem was solved but .... i was wrong.
The problem is more difficult that what i wrote in the first post.
For this, i need your help/suggestions.
If i create a document 0000001 with VA01 trx, after the document is saved on db,i have to :
- read positions of 0000001 invoice document
- add the net value of some positions in a custom table
- modify some data of some invoice positions of 0000001 invoice document
- save again the document 0000001
Whith the BADI, i can save the net value of the invoice positions in the custom table. The problem is that the BADI code is executed before the commit work. But i think i can solve this problem using a function module ... in update task.
The main problem comes after i saved the net value in the custom table, because i have to modify the invoice document just created.
Before the commit i don't have any values in the db, so how i can modify that values? And with which technique? The BADI doesen't support "PERFORMS" (on commit) and in a function module (in update task) i cannot use instructions like call transaction, call screen, submit etc because they set an implicit commit work --> that means dump during registration.
How i colud solve the problem? Workflow?
Thx a lot again
Andrea

How to avoid time wastage in starting & Stopping weblogic server during development ?

It is very frustrating to stop the server and start the server for any small changes made in the application.
Is developer supposed to restart the server for for any small changes made along with the testing?
One restart(Stop and Start) activity takes more than 10-15 mins. in debug mode.
1) I make some changes then I start server in debug mode
2) I see some mistakes in my bean code
3) I change my bean.java or Impl.java
4) I make a futile effort to reload Jars and reload the page
5) It never takes my changes
6) Only changes in properties of jspx components will accept the changes at the page refresh
6) I add new component or new binding to jspx page, This will not even pay heed to re-deployment, I need restart the server
7) I work only 7 hrs a day (1 hr-lunch)! 7*60=420 mins.... lets say I make code changes 10 times a day 10*20(200) half day
is gone in just restarting server/redeploying changes.
8) So frustrating..... !!!
Que:
1) Is the developer is supposed to imagine all the errors beforehand and code so that he wont waste time in restarting?
2) How nice it would be that you just recompile the changes and you get to see your changes just by refresh...
that is why pl/sql development is so fast.
3) Is there any way to do it like that? or Are there are any quick tricks or precautions to avoid restarting the server.
4) Am I not following the correct development/deployment methods?
It will be really great help for me if you experts guide me on the practise you follow for restarting/redeploying.
Thanks
Rahul

Rahul, please tell us your jdev version!
1) this always helps! In the old days you only compiled once a day and if the compiler found an error you had to wait a whole day until you got the next chance. Do feel privileged that you can compile multiple times. A restart is not nessecary in every case, but depending on the version you hit to restart more often. You should try to find out why it takes so long and minimize this time! Using 11.1.1.7.0 i start my server in less then a minute.
2) answer depends on the jdev version, but you don't get the speed of pl/sql for wenn application development.
3) one thing to do is to define the jdbc connections used in the server or then use jndi to access the resource. This way you don't lose a minute or connection stopping the server. Next it's best to keep the server as clean as possible. Read the log when the server starts and stops you get plenty of info what takes how long. Then start optimizing.
4) no, your method is ok.
Timo

How do I update JSPs without having to restart WebLogic?

How do I update JSPs without having to restart WebLogic? I have tried setting pageCheckSeconds to 0 in my weblogic.xml file. I have also tried setting Reload Period to 0 in the console. Please advise.


          Just bring up the Weblogic Console. Drill down to your webapp. De-select the Deploy
          option. Click on apply. Select the Deploy option and Click apply. Basically, Un-deploy
          and re-deploy your webapp.
          Later...
          - Wayne
          "cleve" <[email protected]> wrote:
          >which is here:
          >
          >http://e-docs.bea.com/wls/docs61////javadocs/weblogic/management/tools/WebAp
          >pComponentRefreshTool.html
          >
          >"Michael Young" <[email protected]> wrote in message
          >news:[email protected]..
          >> Try using the weblogic.refresh tool.
          >>
          >> regards,
          >> Michael
          >>
          >> Tony Nguyen wrote:
          >>
          >> > How do I update JSPs without having to restart WebLogic? I have tried
          >setting pageCheckSeconds to 0 in my weblogic.xml file. I have also tried
          >setting Reload Period to 0 in the console. Please advise.
          >>
          >> --
          >> Michael Young
          >> Developer Relations Engineer
          >> BEA Support
          >>
          >>
          >
          >

How to avoid restart weblogic after I modify EJB implementation class?

Similar Messages

Maybe you are looking for