How to avoid the selection of a Parent node and its child node at a time?
Example:
consider the below JTree.
Parent1
---->Parent2
-------->Child3
Parent3
---->Parent4
My requirement :
Parent1 and Parent3 can be selected at a time(using ctrl keys)
Parent2 and Parent4 can be selected at a time
Parent1 and Parent2 should not allowed to select at a time.
In general : A parent and any of its child should not be selected at a time.
How to achieve this? Anyone please help me.
Thanikai wrote:
I am very sorry.Whatever for? It's a valid question.
How do i implement a custom TreeSelectionModel?I would start by going through the source of DefaultTreeSelectionModel so see how the default selection is handled. Also probably check out JTree.EmptySelectionModel to see how selection is prevented.
Which methods to override?Methods in the class you choose to extend, obviously. But before that you need to firm up certain design decisions: if a parent node is selected and the user attempts to select one of its child nodes, do you select the child and deselect the parent or do nothing/ and vice versa.
etc.... may form the basis for a future, more specific question accompanied by a [_SSCCE_|http://mindprod.com/jgloss/sscce.html].
luck, db
Similar Messages
-
How to avoid the hard limit of 100 column and items per page?
I have created a Form on a Table with Report. I need to create/edit approximately 175 items. The items on the Form have a limit of 100 column and items per page. What is the best way to carry the remaining items to another Form and doing an insert or update? or is the 100 column limit on the insert/update per table as well?
Thank You.Hi Rick,
The 100 item limit is on a page, not a table, so you shouldn't have any trouble with your insert or update processes.
Here's a thought:
Report currently has a column that links to the first page of items (page 14) with the retrieved row. Presumably you also have a Add New button on the report page that links to page 14 for a new row.
Define a Next button on page 14 that branches to the second page of items (page 16). Also define a Previous button on page 16 to return to page 14. But page 16 would be the only page with a Save button.
Now, if user clicks Add New, user will get a blank page 14. Once user enters the info and passes validation they click Next and will be sent to page 16 to enter the remaining info and Save.
If user clicks one of the column links, they will be brought to page 14 with the clicked row - they can change whatever info there and click Next, or just click Next, to get to page 16. After any changes are made, they click Save.
I'm assuming you've been thru the tutorials and realize that you'd really have two Save buttons defined for page 16 - one conditional on your primary key item having a value (existing record) and one conditional on it being null (new record) - check out the tutorials for more info, but this is how the application would know whether to run an insert process or an update process.
Hope this all makes sense and can help,
John -
How to get Parent nodes and corresponding child nodes in BI Hierarchy
Hi all,
I have a standard function module 'RSNDI_SHIE_STRUCTURE_GET3' to get child node if i pass parent node. But I need child nodes along with the provided parent node as I use this in a loop in BI.
ThanksCould any one help me in this regards .
Thanks in advance
Regards,
sri -
How to avoid the transport request popup when changing real-time load behav
Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try. -
XML E4X Select nodes based on child node attribute.
Hey,
I am trying to make a selection on following XML.
I want to retrieve a list of the variable node when its child nodes metadata attribute "name" is not equal to "transient". I have read through the documentation but have not been able to solve this and it should be rather simple. So far I have tried with something like.
var variables:XMLList = classInfo.variable.(metadata.(@name != "transient"));
var variables:XMLList = classInfo.variable.(metadata.@name != "transient");
But it returns all variable nodes.
<type name="com.sca.dataModel::PresentationDataEntity" base="com.sca.dataModel::BaseEntity" isDynamic="false" isFinal="false" isStatic="false">
<extendsClass type="com.sca.dataModel::BaseEntity"/>
<extendsClass type="Object"/>
<variable name="subtitle" type="String">
<metadata name="__go_to_definition_help">
<arg key="file" value="/Users/jonas/projects/SCA-CMS/src/com/sca/dataModel/PresentationDataEntity.as"/>
<arg key="pos" value="128"/>
</metadata>
</variable>
<variable name="id" type="Number">
<metadata name="__go_to_definition_help">
<arg key="file" value="/Users/jonas/projects/SCA-CMS/src/com/sca/dataModel/BaseEntity.as"/>
<arg key="pos" value="153"/>
</metadata>
</variable>
<variable name="tableName" type="String">
<metadata name="transient"/>
<metadata name="__go_to_definition_help">
<arg key="file" value="/Users/jonas/projects/SCA-CMS/src/com/sca/dataModel/BaseEntity.as"/>
<arg key="pos" value="118"/>
</metadata>
</variable>
<variable name="db_SortAsc" type="Boolean">
<metadata name="transient"/>
<metadata name="__go_to_definition_help">
<arg key="file" value="/Users/jonas/projects/SCA-CMS/src/com/sca/dataModel/BaseEntity.as"/>
<arg key="pos" value="281"/>
</metadata>
</variable>
<variable name="title" type="String">
<metadata name="__go_to_definition_help">
<arg key="file" value="/Users/jonas/projects/SCA-CMS/src/com/sca/dataModel/PresentationDataEntity.as"/>
<arg key="pos" value="100"/>
</metadata>
</variable>
<method name="setData" declaredBy="com.sca.dataModel::BaseEntity" returnType="*">
<parameter index="1" type="Object" optional="false"/>
<metadata name="__go_to_definition_help">
<arg key="file" value="/Users/jonas/projects/SCA-CMS/src/com/sca/dataModel/BaseEntity.as"/>
<arg key="pos" value="330"/>
</metadata>
</method>
<metadata name="__go_to_ctor_definition_help">
<arg key="file" value="/Users/jonas/projects/SCA-CMS/src/com/sca/dataModel/PresentationDataEntity.as"/>
<arg key="pos" value="167"/>
</metadata>
<metadata name="__go_to_definition_help">
<arg key="file" value="/Users/jonas/projects/SCA-CMS/src/com/sca/dataModel/PresentationDataEntity.as"/>
<arg key="pos" value="42"/>
</metadata>
</type>Perfect, that worked!
Thanks.
Jonas -
How to avoid the screen of selection output device
Hi all,
Who can tell me how to avoid the screen selection output device when running a smartform.
Best regard.Hi,
data: wa_SSFCTRLOP type SSFCTRLOP.
wa_SSFCTRLOP-DEVICE = 'PRINTER'.
wa_SSFCTRLOP-NO_DIALOG = 'X'.
wa_SSFCTRLOP-PREVIEW = 'X'.
in the function module
call function '....
exporting
CONTROL_PARAMETERS = wa_ssfctrlop
regards,
Santosh Thorat -
How to avoid the below nested select statement
Please any one help me how this select statemet is working and how to avoid the nesetd select statement .
if we avoid below nested , does it improve performace ?
select field1 field2
into table w_feeds
from ZTable as t
where field2 in r_feedf1
and POSITION_POSTDT =
( SELECT MAX( position_postdt ) FROM zTable
where position_postdt le r_pdate-high
and field1 = t~field1 ).
Thanks in Advace.Hi,
Instead of nested query go for two separate queries. I see you are querying on the same table...so better go by this approach
select field1 field2 POSITION_POSTDT
into table w_feeds
from ZTable
where field2 in r_feedf1.
Remove the where condition on POSITION_POSTDT
Sort the table w_feeds by POSITION_POSTDT Descending; So you will get data pertaining to Max Position_Postdt.
Finally delete the other entries which are not Max.
This will enhance the performance over the nested query.
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM
Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM -
i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
substr(rcstcnatcnatcnatcnawther,3,2) c,
substr(rcstcnatcnatcnatcnawther,5,1) s,
substr(rcstcnatcnatcnatcnawther,6,3) tc,
substr(rcstcnatcnatcnatcnawther,9,3) na,
substr(rcstcnatcnatcnatcnawther,12,3) tc2,
substr(rcstcnatcnatcnatcnawther,15,3) na2,
substr(rcstcnatcnatcnatcnawther,18,3) tc3,
substr(rcstcnatcnatcnatcnawther,21,3) na3,
substr(rcstcnatcnatcnatcnawther,24,3) tc4,
substr(rcstcnatcnatcnatcnawther,27,3) na4,
substr(rcstcnatcnatcnatcnawther,30,10) wther,
sno
from scott.sms1 a
where sno = (select max(sno)
from sms1
where sno != a.sno
); ---------------> added where clause with table alias.
end;Regards
Etbin -
How can avoid the problem of Parameter Prompting when I submitting ?
I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
1. using System;
2. using System.Collections;
3. using System.Configuration;
4. using System.Data;
5. using System.Linq;
6. using System.Web;
7. using System.Web.Security;
8. using System.Web.UI;
9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22. CrystalReportViewer crViewer = new CrystalReportViewer();
23. //CrystalReportSource crsource = new CrystalReportSource();
24. int nItemId;
25.
26. protected void Page_Load(object sender, EventArgs e)
27. {
28. //Database Connection
29. ConnectionInfo ConnInfo = new ConnectionInfo();
30. {
31. ConnInfo.ServerName = "127.0.0.1";
32. ConnInfo.DatabaseName = "Xcodf";
33. ConnInfo.UserID = "HR777";
34. ConnInfo.Password = "zghshshs";
35. }
36. // For Each Logon parameters
37. foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38. {
39. cnInfo.ConnectionInfo = ConnInfo;
40.
41. }
42.
43.
44.
45.
46.
47.
48. //Declaring varibles
49. nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50. //string strStartDate = Request.QueryString.Get("StartDate");
51. //int nItemId = 20;
52. string strStartDate = "23-JUL-2010";
53.
54. // object declration
55. CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56. CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59. TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61. // new report document object
62. ReportDocument oRpt = new ReportDocument();
63.
64. // loading the ItemReport in report document
65. oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67. // getting the database, the table and the LogOnInfo object which holds login onformation
68. crDatabase = oRpt.Database;
69.
70. // getting the table in an object array of one item
71. object[] arrTables = new object[1];
72. crDatabase.Tables.CopyTo(arrTables, 0);
73.
74. // assigning the first item of array to crTable by downcasting the object to Table
75. crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77. dbConn = crTable.LogOnInfo;
78.
79. // setting values
80. dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81. dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82. dbConn.ConnectionInfo.UserID = "HR777";
83. dbConn.ConnectionInfo.Password = "zghshshs";
84.
85. // applying login info to the table object
86. crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93. crViewer.RefreshReport();
94.
95. // defining report source
96. crViewer.ReportSource = oRpt;
97. //CrystalReportSource1.Report = oRpt;
98.
99. // so uptill now we have created everything
100. // what remains is to pass parameters to our report, so it
101. // shows only selected records. so calling a method to set
102. // those parameters.
103. setReportParameters();
104. }
105.
106. private void setReportParameters()
107. {
108.
109. // all the parameter fields will be added to this collection
110. ParameterFields paramFields = new ParameterFields();
111. //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112. //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114. // the parameter fields to be sent to the report
115. ParameterField pfItemId = new ParameterField();
116. //ParameterField pfStartDate = new ParameterField();
117. //ParameterField pfEndDate = new ParameterField();
118.
119. // setting the name of parameter fields with wich they will be recieved in report
120.
121. pfItemId.ParameterFieldName = "RegionID";
122.
123. //pfStartDate.ParameterFieldName = "StartDate";
124. //pfEndDate.ParameterFieldName = "EndDate";
125.
126. // the above declared parameter fields accept values as discrete objects
127. // so declaring discrete objects
128. ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129. //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130. //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132. // setting the values of discrete objects
133.
134.
135. dcItemId.Value = nItemId;
136.
137. //dcStartDate.Value = DateTime.Parse(strStartDate);
138. //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140. // now adding these discrete values to parameters
141. //paramField.HasCurrentValue = true;
142.
143.
144.
145. //pfItemId.CurrentValues.Clear();
146. int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147. pfItemId.Name = valueIDD.ToString();
148.
149. pfItemId.CurrentValues.Add(dcItemId);
150. //ParaLocation.ApplyCurrentValues;
151. pfItemId.HasCurrentValue = true;
152.
153. //pfStartDate.CurrentValues.Add(dcStartDate);
154. //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156. // now adding all these parameter fields to the parameter collection
157. paramFields.Add(pfItemId);
158.
159. //paramFields.Add(pfStartDate);
160. //paramFields.Add(pfEndDate);
161. /////////////////////
162. //Formula from Crystal
163. //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164. crViewer.RefreshReport();
165. // finally add the parameter collection to the crystal report viewer
166. crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170. }
171. }Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
How to identify the Selected row number or Index in the growing Table
Hi,
How to find the selected Row number or Row Index of growing Table using Javascript or Formcalc in Interactive Adobe forms
Thanks & Regards
SrikanthAfter using bellow script it works fine
xfa.resolveNode("Formname.Table1.Row1["this.parent.index"].fieldname").rawValue; -
How to skip the Selection screen while using BAPI_MATERIAL_DELETE
Hi,
I have to delete material master.
I'm using BAPI_MATERIAL_DELETE Fm,
But while executing this BAPI it is going to a screen where it is asking to tick the Check Box for material number.
Can you please tell me how to execute the BAPI Avoiding the selection screen.
Thanks & Regards,
RajenderHi,
Thanks for replying.
We have to run the BAPI in Background, Then how to achieve the default values.
Thanks & Regards,
Rajender. -
How to avoid default selection screen in HR interfaces(using pnp ldbs)
How to avoid default selection screen in HR interfaces(using pnp ldbs)
Dear Rakesh,
The report category is used to change the selection screen of programs that use the 'PNP' logical database.
See links bellow:
http://www.sapdevelopment.co.uk/hr/hr_repcat.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/15/229357553611d3967f00a0c9306433/frameset.htm
Report categories for selection screen in HR programming
Also visit the following blog:
/people/alvaro.tejadagalindo/blog/2006/02/19/how-to-deal-with-hr-payroll-reports
Regards,
Naveen. -
How to change the selection background color of the selected item in the popup menu of the choice box ?
By defaut, the selection background color likes "blue", but if I want it to be "yellow" for example, how should I do ?
ThanksThe id is applied by (I think) the skin class of the ChoiceBox. You don't need to define it.
You have to apply the css in an external style sheet. You can apply the external style sheet to any parent of your choice box, or to the scene (the most usual way to do it).
Example:
import java.util.ArrayList;
import java.util.List;
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.ChoiceBox;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class ChoiceBoxTest extends Application {
@Override
public void start(Stage primaryStage) throws Exception {
primaryStage.setTitle("Example 2");
final ChoiceBox<String> choiceBox = new ChoiceBox<>();
List<String> tempResult = new ArrayList<String>();
for (int i = 0; i < 10; i++) {
tempResult.add("Item " + i);
choiceBox.getItems().setAll(tempResult);
VBox root = new VBox();
root.getChildren().add(choiceBox);
final Scene scene = new Scene(root, 300, 250);
scene.getStylesheets().add("choiceBox.css");
primaryStage.setScene(scene);
primaryStage.show();
public static void main(String[] args) {
launch(args);
choiceBox.css:
@CHARSET "UTF-8";
#choice-box-menu-item:focused {
-fx-background-color: yellow ;
#choice-box-menu-item .label {
-fx-text-fill: black ;
Message was edited by: James_D -
In BI how to filter the selection options based on inputs on top field
Hi Friends,
In BI, How to filter the selection options based on inputs on top field.
The system should automatically filter the lower level drop downs based on the selection of a higher level.
For e.g. :
If a user selects a Country then the States drop down should only display the State's belongs to the Country. Similarly when a State is selected, the District drop down should display only those District's belongs to the State.
Thanks in Advance.
Regards
Jayaram MHi Anil,
Thanks for reply but I couldn't use Compounding Characteristic here. Need some other solution.
Regards
Jayaram M -
How to get the selected values from the shuttle
Hi
Please tell me how to get the selected option values from the shuttle leading list.
Thanksyou can also obtain the option values present in the leading and trailing lists using the
following methods:
public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)
public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
order in which they appear in the list:
String[] trailingItems =
shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
--Anil
Maybe you are looking for
-
Hi, i'm from albania I just boght a new lumia 925, when the black update will be avaible? Thenks Moderator's note: We have amended the title of this post as we have created a new thread so that other users can easily respond on this.
-
I cant export my photos from my mac to my ipad , bluetooth wont se
i cant export my photos from my mac - osx - 10.6.8 to my ipad air , bluetooth wont recognise it
-
Invalid Entry Values in Variable on 0FISCPER
Dear Friends We have a User Entry Query Variable (ZFYVAR1) on (0FISCPER - Fiscal Year/Period). and we are using "V3" Fiscal Year Variant. I am not sure this is the way it works or not.. but the problem is.. This variable accepts the values like "01
-
Linksys WBP54G bridge WEP authentication and firmware
Hello, I'm working Linksys WBP54G bridges and am having problems in a couple areas. One is that when configuring WEP 128 for the bridge, the utility refuses to allow more than 16 characters being entered for the passphrase even though 128 bit WEP all
-
Security & Privacy System Preferences pane cannot open!
my env: - Max OS X 10.7.3 - 2.2 Ghz Intel Core i7 this month , i can not enter Security & Privacy pane from System Preferences - when i click - pop alert windows, tell some error what can i do now?!