How to backup a rootenv when there are subfolders with DBs?

Hello,
Is there any way to hotbackup a rootenv with databases when there are subfolders with databases?
When I run a hotbackup (with db_hotbackup) on my rootenv, it only backups databases from the root of my rootenv. But, in that root directory, I have some subdirectories with databases too.
Thank you.

Hi,
If you have root directory as : */your/root/dir*
and within that you have folders like : */your/root/dir/sub1* and */your/root/dir/sub2* and would want to backup the db files in */your/backup/dir* then, you should invoke db_hotbackup as
db_hotbackup -cv -b /your/backup/dir -h /your/root/dir -d ../dir/sub1 -d ../dir/sub2
Regards,
Debsubhra Roy

Similar Messages

  • How to get the location of a pageitem when there are pageitems with same UID?

    There are two text frames with same UID but on different pages( also defferent spreads ). What I want to know is how I can get the location of them both.
    The following code can only get the location of the first frame because the second frame has the same UIDRef with the first one(because they are in one document with same UID) .
        InterfacePtr<IGeometry> splineGeo(ItemRef, IID_IGEOMETRY);
        PMMatrix itemPMMatrix = ::InnerToPasteboardMatrix( splineGeo );
        PMRect  itemPMRect = itemGeo->GetStrokeBoundingBox( itemPMMatrix );
    Is there any way I can get the second frame location?
    Thanks a lot.

    No.
    Just copy the pageitems from master page to document page.

  • How do I combine libraries when there are 3 accounts?...

    Hi, I need help. I have an XP computer at home, and it has several accounts on it. 2 of them, however, are the ones that we use for itunes. one is an administrator account and one is for the kids. We want to move all of the songs into one library (particularly into the kid's account). How do we do that?
    PC   Windows XP  

    Hi, mandapanda5514.
    Have a look at this article in the Apple Knowledge Base.
    Scroll down to the Windows section when following the instructions, look to C:\Documents and Settings\All Users\Documents\My Music as "a publicly accessible location" for the Shared Music folder.

  • How do you update software when there are multiple users with different (unknown) apple ID's?

    We are a college with different users borrowing 'loaner' Macbooks.
    several users with different ID's have installed software that is now tied to that Machines serial number, and cannot be updated or removed apparently. We are trying to update iPhoto for use with iBook author, but it was installed by an unknown user and cannot be removed.

    The only practical solution is to wipe and re-provision the units when they're returned.

  • How to call a BAPI when there are structure tables as Input.

    Environment: Data Services 3.1  SAP ECC 6.
    I can run simple BAPI's where I just populate the Input Parameters.
    My question is around more complex BAPI's.
    I created a data flow that looks like:
    Row Generation > Query > Unnest Query > Template table.
    Inside of the query I created a new Function and called the BAPI_PROJECT_MAINTAIN.
    This BAPI requires adding data as part of the Structure Tables in the BAPI.  I see these tables in the SAP Data Store and I also see a single input field in the Data Services Function Wizard that desribes the Structure.
    My question is - how do I populate the fields when it comes from a Structure Table in the BAPI?

    A table parameter is a schema, so you need an upfront query where you create that schema with the nested data. The schema is then mapped to the table parameter, the columns of the schema have to match by name.
    https://wiki.sdn.sap.com:443/wiki/display/BOBJ/Calling+RFCs-BAPIs

  • How do I find out when there are pending update for ipad2 model A1396

    Hello,
    How and where would I go within my ipad2 model A1396 to find out if it's pending system automatic updates.

    How to update your iPhone, iPad, or iPod touch

  • How to make round curves when you are animatting with the Rec mode?

    Hi! I am making a project in motion. I recored a freind writing words and stuff in the roof of my house with two flashlights. My plans was to follow the lights with motion traking: Analize move or match move. And then add a particle emmite for making something like this: http://www.youtube.com/watch?v=MZf2W3S7gV0&feature=fvw . When i tried to make the match move it was imposible. So i desided to make it manually with the REC button. And it work perfectly, the only problem is that it can's achive the round cruves (bezier like). I can only make squared like turns and it looks awful. I have also tried bezier as a path but i don't know how to make the particle emmiter follow it with different speeds, becouse the movement of the flashlight is inconstant.
    What can i do to make a round curved path and make a particle emmiter follow it with the rec button with the different speeds of the flashlights? Please help me!!!! I have to deliver this work for tuesday!
    Thanks for you time y hope you can help me out as soon as possible.
    Juan Javier.
    PD Sorry for my english! jajajaja.

    Juan Javier Ibarra Pitts wrote:
    When i tried to make the match move it was imposible.
    Hi
    Why was it impossible?
    It sounds like tracking is the only way your going to achieve what your after given the way you've shot your footage and the spatial and temporal nuances therein.
    You'll find comprehensive instructions on how to track particles to footage starting on page 49 of this document:
    http://manuals.info.apple.com/en/MotionSupplementalDocumentation.pdf
    Regards.

  • How do I make a backup when there are 4 users on my mac

    How do I make a backup when there are 4 users on my mac?

    Welcome to the Apple Support Communities
    If you have more than one user, the backup is just the same as if you have one user. All users are backed up and there isn't any difference between a backup made on a Mac with one user and on a Mac with multiple users. Then, if you want to restore that backup in the future, you will be able to select which users you want to restore

  • How to change the default JRE when there are several version of JRE in Sys

    How to change the default JRE when there are several version of JRE in System?
    i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
    Now the JRE is jdk1.3\bin
    When run class that was compiled with jdk1.5,throw:
    java.lang.UnsupportedClassVersionError
    How can i change the jre to 1.5?

    There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
    Excerpts from sun docs:
    However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
    Example:
    Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
    Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
    Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
    Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
    If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
    Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
    Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
    Details are here
    http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
    My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
    Will update if i find more information

  • How can I get rid of duplicate birthdays in icloud Calendar, especially when there are no Contacts in the iCloud? Case ID: 365381395

    How can I get rid of duplicate birthdays in icloud Calendar, especially when there are no Contacts in the iCloud? Case ID: 365381395

    Found the answer myself while helping to set up iPhone.  It is simple when you know how.  Before signing out of iCloud to sign in again and restore the link to Photo Stream I had opted to copy iCloud contacts to the Mac.  When I signed in again this created two iCloud views which can be seen in Contacts Preferences.  I just disabled one of them.  Not brave enough to attempt removal but I gues this would work too.

  • How to replace sky when there are trees in the photo

    I have several photos taken outdoors with a dull sky. I also have several sky shots to supply the blue sky; with or without clouds. I know a couple of ways to do  that --as long as the horizon line is clear, such as roofs, etc.  My preferred method is to use a tool; e.g., Magic Wand, to select the sky area and then copy/paste a blue sky image using Ctrl+Shift+V command. This makes the copied sky inserted into the original image and I'm happy with the results.
    But when there are trees or other bushes between the camera and the sky, problems begin.  No matter how carefully I try to include all the "holes" in those trees, the end result contains white spots where the selected section failed to follow the tree "holes".  Anybody know how to fix these types of problems?  I am somewhat familiar with layers-- which I have tried to use to solve this problem.
    Using PSE-12 on Windows 8.1
    TIA,
    Pete Grant

    Pete,
    There are several ways to do this. In my experience the Alibony technique works well. You will be able to use your "good" sky pictures:
    Watch Lesson 12: Quick Colorless Sky Replacement | Alibony Lessons for Photoshop Elements Episodes | How To Videos | Bli…
    As I pointed out to you on June 5, 2014, this is how I do it after watching the Alibony video.
    Open your picture (A) (File>open), and open the replacement sky picture (B)
    On the sky picture (B), go to Select>all from the menu, then Edit>copy to place it on the clipboard
    Go back to your picture (A), then Edit>paste. The new sky (B) should come in on a new layer
    With the move tool, use the corner handles to reduce the size of the sky (B) to cover the old sky on (A)
    In the layers palette, set the blending mode of (B) to darken
    Set the foreground color chip to white
    Get the Gradient tool out of the toolbox, and drag a foreground to transparent, linear gradient from below up to the top of the tree line, while holding down the shift key.
    With a soft white brush, at reduced opacity, gently paint the horizon a bit, as we want the horizon to be a tad lighter than the rest of the sky.
    If necessary, add a few clouds with the Return to Eden set.

  • I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

    I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

    Hi...
    Mac OS X keyboard shortcuts
    Control-F4
    Move focus to the active (or next) window
    Shift-Control-F4
    Move focus to the previously active window
    By the way...  since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
    Click Help then click Help Center
    As an example type in    keyboard shortcuts
    You can use the Help menu for almost any application on your Mac.
    Apple - Find Out How - Mac Basics
    For held switching from PC to Mac >  Apple - Support - Switch 101

  • Help! How do i make a button state maintain when there are other buttons on the page?

    I need to have the down state of pressed buttons stay in that state when there are multiple buttons being pressed on the same html page...

    Hello and welcome to the forum,
    Not sure if I understand well, but think you are bumping into the Quiz scope... I have been trying to explain this in a blog post, with other functionalities of Question and Score slide:
    Question Question Slides
    Lilybiri

  • Howe can I tell when there are no references to an object?

    Hi all,
    Is there any way for me to know when there are no references to an object without using finalize()?
    I want to pool created objects when it is safe to do so.
    finalize() won't work since it is called only once for every object instance.
    Regards,
    Marcus

    If you are trying to establish an object pool by placing the objects back in the pool when there are no references to the object, then I am afraid you are out of luck.
    If there were no references, then you would not have a "handle" on the object to be able to manipulate it in any way (like putting it back in the pool).
    If you are talking about something else, then the classes in java.lang.ref.*, might be of use.
    If you are really trying to pool objects, then you should have some sort of "close" method in the objects that is called when they are no longer needed and can be returned to the pool.

  • Joining 2 related records using PL SQL in Apex - Problems when there are more than 2 related records?

    Hi
    I am combining 2 related records of legacy data together that make up a marriage record.  I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex.  I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
    However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data.  The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
    How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around?  Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
    declare 
         cursor c_mar_principle(b_entry in number, b_book in varchar2) 
         is 
              select DISTINCT  id, forename, surname, marriagedate, entry, book,  formername, principle
              from   MARRIAGES mar 
              where  mar.entry   = b_entry
              and    mar.book = b_book
              order by principle desc, id asc; 
         rec c_mar_principle%rowtype;
    begin 
    open c_mar_principle(:p16_entry,:p16_book)  ;
    fetch c_mar_principle into rec;
    :P16_SURNAME_GROOM   := rec.surname; 
    :P16_FORNAME_GROOM   := rec.forename;
                   :P16_ENTRY := rec.entry; 
                   :P16_BOOK :=rec.book;
    :P16_FORMERNAME :=rec.formername;
    :P16_MARRIAGEDATE :=rec.marriagedate;
    :P16_GROOMID  := rec.id;
    fetch c_mar_principle into rec;
    :P16_SURNAME_BRIDE   := rec.surname; 
    :P16_FORNAME_BRIDE   := rec.forename;
                   :P16_ENTRY := rec.entry; 
                   :P16_BOOK :=rec.book;
    :P16_FORMERNAME :=rec.formername;
    :P16_MARRIAGEDATE :=rec.marriagedate;
    :P16_BRIDEID  := rec.id;
    close c_mar_principle;
    end;

    rambo81 wrote:
    True but that answer is not really helping this situation either?
    It's indisputably true, which is more than can be said for the results of querying this data.
    The data is from an old legacy flat file database that has been exported into a relational database.
    It should have been normalized at the time it was imported.
    Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
    In my professional opinion, none. The actual problem is the data model, so that's what should be changed.

Maybe you are looking for