How to being the coding inside an inbound proxy class for a given structure

Hi.
i have been assigned a task to write a code to post a GL for which i am using a BAPI but as the mapping is done in XI the structure has been provided, where the structure in nested in first table type and then line type and above all the proxy structure, so i was wondering how would i start with the coding part as it would have been easy if i had to access the structure directly from the DB table but now i have to make use of the structure provided by XI.
can any one help to start with the coding logic, where in afterwards in can implement the rest of the logic myself,
Thanks in advance,
Robert.

You should run an application in the "debug" mode. Just put "&analyze=X" at the end of the PCUI application' URL in the browser.
Sometimes it's necessary to turn off buffering:
Call up the 'User maintenance' transaciton (SU01)
Call up the change mode for the desired user
Go to the 'Parameters' tab
Create parameter CRM_URL_BUFFER_OFF if this does not exist
Enter parameter value 'X' for parameter CRM_URL_BUFFER_OFF
Save

Similar Messages

How to set username and password when using Proxy class for SOCKS5?

Hi all,
I use the proxy class for SOCKS5, so need to set username and password, I don't find where can I set the value. whether the API support it.
Thanks in advance!

System.getProperties().put("proxySet", "true");That does nothing. Remove.
System.getProperties().put("proxyHost", getProxyHost());
System.getProperties().put("proxyPort", getProxyPort());You should be setting socks.proxyHost and socks.proxyPort here.
System.setProperty("java.net.socks.username", getSOCKSUsername());
System.setProperty("java.net.socks.password", getSOCKSPassword());
Authenticator.setDefault(new ProxyAuth(getSOCKSUsername(), getSOCKSPassword()));You either need the first two lines or the third, not both. See the last link posted above.
1. After I set the value, I connect internet by proxy, how the proxy server knows the values?Because Java tells it during the SOCKS handshake.
2. In my app, I just set the values in the system properties, then JVM does remaining work? Remaining work is not concerned?Should be OK unless you have to connect to a different SOCKS proxy from the same JVM, but that kind of thing is problematic anyway due to the curious Authenticator design which is set globally, not per connection as you might expect.

How to get the List of Database Objects (Table/View) for a given APEX Page.

Hi,
I have an application and that consist of pages like page1,2,3,.....
*1.* I want a report which can give me the list of all the Pages1,2,3,....
I am using the following query to acheive this.... THIS IS FINE..
select a.workspace, a.owner, a.application_name, b.page_id, b.page_name
from apex_applications a,
apex_application_pages b
where a.workspace = b.workspace
and a.application_id = b.application_id*2. Now, I want for each individual page*, the list all the database objects (tables/views), which that page is using.
I am using ALL_DEPENDENCIES , but I am not getting the result.
So, want to know if there any view/table, where I can get the Application Pages & there database object list...
Thanks,
Deepak

Hari,
Thanks for the response.
The view APEX_APPLICATION_PAGE_DB_ITEMS will only give me the table name related to any Page Items defined to that page..It will not give me all the database objects..
suppose we have a Page, having a report based on multiple tables and there is no Page items defined on that page, we will not have any value in this ....DB_ITEMS table. same thing if we have define some PL|SQL(using some table/view) in a Process, that will not be populated in .....DB_ITEMS table. I want some thing like all the database objects (table/views/function/procedure/.....) for a particular Page ID.
Thanks,
Deepak

How to modify the coding part of KE30 reports ?

How to modify the coding part of KE30 reports ,
so that I can be able to restrict report output based on sales office.
I am unable to find out the program name also.
Regards
Anubhav

>
Venkat Reddy wrote:
> Hi,
>
> If u want to know the program running for KE30 just go to SE93 and give KE30
> and click on display you can see the program running for KE30 will be SAPMKCEE.
> I think this is much simpler :-).
>
> Rather than change the standard report try to prepared your own that will be more
> comfortable since it will be complex task to achieve editing the standard program.
> Good Luck
>
> Regards
> VEnk@
>
> Edited by: Venkat Reddy on Dec 11, 2009 4:52 PM
Venkat,your answer is much simpler If the OP knows there is a tcode Se93, what if he/she does not know it??
P.S: Just a thought.
Regards.
Vishwa.

How to clean the dust inside the screen of the iPod Touch?

Hi everybody,
lately some dust entered inside the screen of my iPod Touch.
At first it looked like one or two pixels were gone bad, but it is just some annoying dust.
The problem is that I cannot figure out any way to remove it.
I tried a gentle blow from the connector hole but the result was worse.
Any idea on how to clean the screen inside?
I hope it is not necessary to go to an Apple Center and pay for the "cleaning service".
Regards,
Andrea

It sounds safe to use
'Falcon's® "Professional" Dust-Off® "XL" compressed-gas is the perfect product for removing dust from your color transparencies before making scans or copy slides; it's also great for removing dust from cameras, lenses, computers and other electronic equipment. Each 12 oz. disposable can comes with its own trigger value and a 4.75" nozzle extension (a red tube) that allows you to place precise bursts of compressed air just where you want it.'
Check the directions on the back... also check the contents. Normally anything like that will inform you of contaminants harmful to delicate electrical devices.
If its just compressed air make sure you keep the can well back from the source.. and unplug the G5 (take it somewhere you don't mind dust.. there no point doing this in situe, just for it to suck it back in again!)
Also.. as mentioned.. keep the can upright (as the air is decompressed the can gets very cold)
Stu
Powermac G5 2.5 Mac OS X (10.4.2) 460gb HD 3gb RAM

How to use inbound exit class for more than one workflow step

Hi All,
In Offline Workflow Approval Scenarios where the work items are sent to outlook of non sap users inbox through workitem exit of the respective workflow item. Based on the user reply from outlook email(either approve or reject) which sends an auto reply to Offline user . We configure an inbound exit class and assign the same in the SMICM transaction. Based on the code written using SAP_WAPI function modules in inbound class exit offline user gets the user approval result and performs the action in SAP.
My question now Is how can we use this inbound exit class for all the steps of a workflow.
For ex: In a workflow I have a decision step followed by an activity step. First I will write the work item exit for the user decision step and inbound exit code for the user decision step and offline user executed the user decision step with approve action.
followed by that I have an activity step for that I will code a work item exit for that activity level but how can I user the same inbound exit class for the activity step as well .
Quick reply would be of great help for me.
With Best Regards,
Veni

For the outbound processing you have the option of replacing the workflow exit by chancing the bsp application of the extended notification (see note 1448241 solution as an example of how to do the change) and replacing the standard links with a "mailto:...".
As far as the inbound processing, that depends on what should be done in the activity step, if for example you have a bapi which executes what the user does you can call it in the inbound class instead of the user and then the relevant wapi (complete the workitem/raise event etc.).

How to get the list of users who has access for list of tcodes.

How to get the list of users who has access for list of tcodes.

Go to transaction SUIM, this has a number of reports for users/authorisations
open the Where used>Autorization Values>In Users
and double click to execute
in authorisation object, enter S_TCODE
then press the "Enter Values" button
It will offer entry boxes to put the transaction code you are interesed in.
Then execute and the list of users with access to this transaciton code will be returned.

How to get the profile object in simple java class (Property accessor)

Hi All,
Please guide me how to get the profile object in simple java class (Property accessor) which is extending the RepositoryPropertyDescriptor.
I have one requirement where i need the profile object i.e i have store id which is tied to profile .so i need the profile object in the property accessor of the SKU item descriptor property, which is extending RepositoryPropertyDescriptor.
a.I dont have request object also to do request.resolvename.
b.It is not a component to create setter and getter.It is simple java class which is extending the RepositoryPropertyDescriptor.
Advance Thanks.

Iam afraid you might run into synchronization issues with it. You are trying to get/set value of property of a sku repository item that is shared across various profiles.
Say one profile A called setPropertyValue("propertyName", value).Now another profile B accesses
getPropertyValue() {
super.getPropertyValue() // Chance of getting value set by Profile A.
// Perform logic
There is a chance that profile B getting the value set by Profile A and hence inconsistency.
How about doing this way??
Create PropertyDescriptor in Profile (i.e user item descriptor), pass the attribute CustomCatalogTools in userProfile.xml to that property.
<attribute name="catalogTools" value="atg.commerce.catalog.CustomCatalogTools"/>
getPropertyValue()
//You have Profile item descriptor and also storeId property value.
// Use CustomCatalogTools.findSku();
// Use storeId, profile repository item, sku repository item to perform the logic
Here user itemdescriptor getPropertyValue/setPropertyValue is always called by same profile and there is consistency.
-karthik

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific WebApplication or Sitecollection?

How to enable the SharePoint 2010 and 2013 Developer Dashboard for specific Web Application or Site collection(not for all Web Application)?
Vishal Goyal

Hi Vishal,
I don't think there is option for specific site collection or web application,but there is option of enabling developer dashboard on specific master pages and that is one on of the way you could do it.
look article on below link to enable developer dashboard on specific master pages
https://msdn.microsoft.com/en-us/library/office/ff512745%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
Let me know if this helps.
Thanks
Bhism

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you :)

How to suspend the installation after downloading packages via ota for lollipop 5.0.1. on my Note 4. always asks me to install it on notification bar. thank you

If you factory reset, it wont make the update go away, but you should back up and reset before you install the update.

How to configure the wifi access with specific time slot for kids?

how to configure the wifi access with specific time slot for kids?

Which model of AirPort base station do you have? Which version of OS X is your MacBook Pro running?
Wi-Fi access can be limited using the Timed Access feature of the AirPort routers. You would do so using the AirPort Utility.

How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
ranki

Hi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com

Reg - how to find the purpose of methods in a class

hi everyone,
           can u plz help me with how to find the purpose of methods in a class???????
a description abt the methods in a class??????
                    thx in advance,
regards,
balaji.s

Hi Balaji
Pls find some stuff.
reward pts if help.
The following statements define the structure of a class:
·        A class contains components
·        Each component is assigned to a visibility section
·        Classes implement methods
The following sections describe the structure of classes in more detail.
Class Components
The components of a class make up its contents. All components are declared in the declaration part of the class. The components define the attributes of the objects in a class. When you define the class, each component is assigned to one of the three visibility sections, which define the external interface of the class. All of the components of a class are visible within the class. All components are in the same namespace. This means that all components of the class must have names that are unique within the class.
There are two kinds of components in a class - those that exist separately for each object in the class, and those that exist only once for the whole class, regardless of the number of instances. Instance-specific components are known as instance components. Components that are not instance-specific are called static components.
In ABAP Objects, classes can define the following components. Since all components that you can declare in classes can also be declared in interfaces, the following descriptions apply equally to interfaces.
Attributes
Attributes are internal data fields within a class that can have any ABAP data type. The state of an object is determined by the contents of its attributes. One kind of attribute is the reference variable. Reference variables allow you to create and address objects. Reference variables can be defined in classes, allowing you to access objects from within a class.
Instance Attributes
The contents of instance attributes define the instance-specific state of an object. You declare them using the DATAstatement.
Static Attributes
The contents of static attributes define the state of the class that is valid for all instances of the class. Static attributes exist once for each class. You declare them using the CLASS-DATA statement. They are accessible for the entire runtime of the class.
All of the objects in a class can access its static attributes. If you change a static attribute in an object, the change is visible in all other objects in the class.
The technical properties of instance attributes belong to the static properties of a class. It is therefore possible to refer in a LIKE addition to the visible attributes of a class through the class component selector or through reference variables, without prior creation of an object.
Methods
Methods are internal procedures in a class that define the behavior of an object. They can access all of the attributes of a class. This allows them to change the data content of an object. They also have a parameter interface, with which users can supply them with values when calling them, and receive values back from them The private attributes of a class can only be changed by methods in the same class.
The definition and parameter interface of a method is similar to that of function modules. You define a method meth in the definition part of a class and implement it in the implementation part using the following processing block:
METHOD meth.
ENDMETHOD.
You can declare local data types and objects in methods in the same way as in other ABAP procedures (subroutines and function modules). You call methods using the CALL METHOD statement.
Instance Methods
You declare instance methods using the METHODSstatement. They can access all of the attributes of a class, and can trigger all of the events of the class.
Static Methods
You declare static methods using the CLASS-METHODSstatement. They can only access static attributes and trigger static events.
Special Methods
As well as normal methods, which you call using CALL METHOD, there are two special methods called constructor and class_constructor that are automatically called when you create an object or when you first access the components of a class.
reward pts if help.
deepanker

How to Check the Profit Center - Sales Group - Sales District for a BP

Hi,
How to Check the Profit Center - Sales Group - Sales District for a Business Partner?
I am not able to identify which Profit center - Sales Group- Sales District was assigned to a Business Partner. Please provide me some inputs to check this.
thanks
Yadayya

Hi
Pls check these tables for data or prepare a z report with abapers.
GLPCA u2013 PCA line items
VBKD u2013 sales district
TVKGR u2013 Sales group
BUT000 u2013 Business Partner
Regards
Sridhara Rao D

How to set the cardinality property as 1..n for a dynamically created node

Hi...everybody
    I am creating Dropdown by index UI element and the
context atrributes dynamically.To bind multiple data to a dropdown
the cardinality property of the node should be 0..n or 1..n,
But i could not set the property of the dynamically created context node to 0..n ...
can any body suggest me..
I implemented the following code in WDDoModify View
IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDNodeInfo node = wdContext.getNodeInfo().addChild("DynamicNode",null,true,true,false,false,false,true,null,
          null,null);
IWDAttributeInfo strinfo=node.addAttribute("Value","ddic:com.sap.dictionary.string");
dbyindex.bindTexts(strinfo);
tc.addChild(dbyindex);
I could successfully display one value in the drop down,by adding the following code before the line tc.addchild(dbyindex);
IWDNode node1=wdContext.getChildNode("DynamicNode",0);
IWDNodeElement nodeElement=node1.createElement();
nodeElement.setAttributeValue("Value","Hello");
node1.addElement(nodeElement);
but when
i am trying to bind multiple values i am getting Exception ,,,,

hi
you are getting the exception because of cardinality property.
i.e   true,false and
you are trying to add morethan one element.
so,if you want to add morethan one than one element you have to set the cardinality property to true,true (or) false,true.
In your code do the following modification for changing the cardinality.
For 0..n -->false,true
      1..n-->true,true
IWDTransparentContainer tc=(IWDTransparentContainer)view.getElement("RootUIElementContainer");
IWDNodeInfo node = wdContext.getNodeInfo().addChild("DynamicNode",null,true,true,false,false,false,true,null,
null,null);
IWDAttributeInfo strinfo=node.addAttribute("Value","ddic:com.sap.dictionary.string");
dbyindex.bindTexts(strinfo);
tc.addChild(dbyindex);
hope this will solve your problem.
In addchild(..) the parameters are
addChild("Name ,
                Element class for model node ,
                Is singleton? ,
                Cardinality ,
                Selection cardinality ,
                Initialise lead selection? ,
                Datatype ,
                Supplier function ,
                 Disposer function);
Regards
sowmya

How to being the coding inside an inbound proxy class for a given structure

Similar Messages

Maybe you are looking for