How to bind data to table in the view

Structure in context:
Result(0....n)
|-----lmAcctbPK(1...1)
|         |-----acctno
|         |------retrieveDate (type: Calendar)
|---closeBalance
|----availableBalance
How can I bind the list to a table in the view?
Thanks in advance.
Message was edited by:
        shen peng

Thanks for your feedback.
In a word, lmAcctbPK is a composite primary key, just like closeBalance and availableBalance, is property of an object.
Output like this:
acctNo                                                |   closeAvailableBalance | closeBalance
YPp6QfwWepzm1h0q7EoCcJ8iEXL4k83u   |    125.0   |     1243.87
                                                                |    125.0   |     1243.87
                                                                |    2125.0 |        3000.0
                                                                |    125.0    |        1243.87
                                                                |     1111.0 |       43794.87

Similar Messages

How to maintain data in tables using maintenace view of the tables in ECC6

Hi,
I have two table SBUSPART (Business partner) and STRAVELAG (Travel agency).
SBUSPART is foreign key table while STRAVELAGE is a reference table. The relationships is :
        SBUSPART-MANDANT          =     STRAVELAGE-CLIENT
        SBUSPART-BUSPARTNUM    =     STRAVELAGE-AGENCYNUM
now, I create a maintenance view ZVI_HT_PARTNER in which SBUSPART is primary table and STRAVELAGE is secondary table. I have also created maintenace interfaces by generating maintenance modules in function group zht_fg. Authorization group is SUNI and maintenance type is one-step, the number maintenace screen is 100.
Now I want to maintain the data in tables SBUSPART and STRAVELAGE together in the maintenace view. If i want to enter a new partner dirctly I have to enter it in table SBUSPART first, only then could I enter the corresponding data in STRAVELAGE.
in older version I easyly do this by the way: in maintenace screen of zvi_ht_partner ( in se11) I choose: system/ services/table maintenace/Enhance.Tab.maintain.
but in ECC6 when I choose: system/ services/table maintenace, there is no Enhance.Tab.maintain instead there are two options Extended table maintenace and View cluster maintenace.
So in this case I don't know how to tackle this problem, Please help me if you have a solution.
Thanks,

Hi,
    I suppose 'Extended table maintenace ' would be same as 'Enhance.Tab.maintain'.
Regards,
Himanshu

How to restrict data from tables in a view cluster

Hi,
I have 5 Z* tables, Company code is the common code in all of these.
I have created a view cluster on these five tables.
My requirement is to viewcluster should display the data of the user's company code.
When i see the data in SE54 it is showing the proper data(i.e data which is related to users company code) for some of the tables.
And displaying all company codes data for some of the tables.
What can be the issue here ?
Do we need to map the data from proper data displaying tables to these tables ? if so How to do that ?
Please help on how i can solve this issue.
Regards,
Sunil Tata.

Here is a small utility that can be used to copy and paste between a table and Excel.
I have been obliged to slice the llb into small chuncks for internet technical issues. Sorry...
CCMessage Edited by chilly charly on 04-02-2005 03:21 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Copy.zip ‏24 KB
Paste.zip ‏22 KB
CopyPaste example.zip ‏11 KB

How to bind data from odata to the ui5 table .

HI ,
Can anybody help to bind Odata service to the ui5 table in eclipse .
This is my code.

Check this
http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html
http://baigsorcl.blogspot.com/2010/03/moving-to-jdeveloper11g-your-first-adf.html
@John now you won :D

How to show data in table on the basis of click on a row of another table

Hi All,
I want to show two tables. In first table the main objects show in turn there is another collection in that main object for which i want to show data in separate table.
e.g.,
ObjectA
have the collection of ObjectBs
when i select ObjectA in main table then all the collection Objects of ObjectBs shows in separate table. Plz help me how to handle this case ??

hi,
You can create two value nodes for storing these collections. The first one would be singleton node as it is the main list. Under that create the second node with singleton = false.
e.g.
---NodeA
 --attrA1
 --attrA2
 --NodeB(singleton = false)
 --attrB1
 --attrB2
Now populate collection of object A in NodeA and after adding element in NodeA populate respective elements in NodeB.
IPrivate<View>View.INodeANode nodeA = wdContext.NodeAnode();
for (Iterator it = collectionA.iterator(); it.hasNext(); )
 ObjectA objA= it.next();
 IPrivate<View>View.INodeAElement nodeAElem= nodeA.createNodeAElement();
 wdCopyservice.copy Corresponding(objA,nodeAElem);
 nodeA.addElement(nodeAElem);
 Collection collectioB =objA.getCollectionB();
 for (Iterator it1 = collectionB.iterator(); it1.hasNext(); )
 ObjectB objB= it1.next();
 IPrivate<View>View.INodeBNode nodeB = nodeAElem.nodeBnode();
 IPrivate<View>View.INodeAElement nodeBElem= nodeB.createNodeBElement();
 wdCopyservice.copy Corresponding(objB,nodeBElem);
 nodeB.addElement(nodeBElem);
Bind NodeA to the first table and NodeB to second one.
After that when you select record in first table automatically its corresponding records will be populated in second table.
Hope this helps!
Monalisa

How to bind data (from database) to the Dictionary structure in Web Dynpro

Hi,
I am getting Hashtable object from the database related classes and I want to bind this data to the Dictionary field in Web Dynpro. So, I can bind this Dictionary field type to the Context variable.
Please let me know the detailed procedure.
Thanks
Tatayya M

Tatayya,
Look at this sample tutorial , It will defintely help you with the Data Dictionary .
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/bad3e990-0201-0010-3985-fa0936d901b4
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/38650ecd-0401-0010-10a0-f9d8fd37edee

How to insert data in table UI elements

Hi Guys,
Here is my questions. How to insert data in table UI elements.
Here i try to insert data by using Add button
data:
 Node_Item type ref to If_Wd_Context_Node.
 Node_Item = wd_comp_controller->get_data_node( ).
data:
 lr_table_line type ref to ITEM.
 lr_table_line = Node_Item->create_element( ).
field-symbols:
 <ls_table> type any.
assign lr_table_line->* to <ls_table>.
Node_Item->bind_element(
 new_item = <ls_table>
 set_initial_elements = abap_false
 index = 1 ).
But i got syntax error the result type of the function method cannot not be converted in to the type of lr_table_line.
And i set cardinality and selection as 0.n.
Pls, let me know for the soulutions
Chandru
Message was edited by:
 chandrasekar muthuvelraj

Chadru, another option is for you to bind the table UI field to an internal table and to populate the internal table. Then, automatically, your Table UI field will be populated with the data from the internal table. Here is the code that does that and works for me. Good luck!
method FILL_DATA .
DATA: node_level1 type ref to if_wd_context_node,
 node_level2 type ref to if_wd_context_node,
 node_items type ref to if_wd_context_node,
 stru_ResItems type BAPI2093_RES_ITEM,
 tab_ResItems TYPE TABLE OF BAPI2093_RES_ITEM,
 n type i.
node_level1 = wd_context->get_child_node( name = 'BAPI_RESERVATION_CRE' ).
node_level2 = node_level1->get_child_node( name = 'CHANGING' ).
node_items = node_level2->get_child_node( name = 'RESERVATIONITEMS' ).
n = 2.
do n times.
 insert stru_ResItems into table tab_ResItems.
enddo.
node_items->bind_table( tab_ResItems ).
endmethod.

How to populate data in table control .

hi all,
i put matnr no. in screen no. 103
validation is done at that screen only.
now when i want to modify dat record
when i put matnr no. at screen 103
so how i will get all data of dat number to table control screen.

Hi Darshan,
Here is a detailed description of how to update data in table controll.
Updating data in table control
The ABAP language provides two mechanisms for loading the table control with data from the internal table and then storing the altered rows of the table control back to the internal table.
Method 1: Read the internal table into the Table Control in the screenu2019s flow logic. Used when the names of the Table Control fields are based on fields of the internal table.
Method 2: Read the internal table into the Table Control in the module pool code. Used when the names of the Table Control fields are based on fields of the database table.
Method 1 (table control fields = itab fields)
In the flow logic we can read an internal table using the LOOP statement. Define the reference to the relevant able control by specifying WITH CONTROL <ctrl>
Determine which table entry is to be read by specifying CURSOR <ctrl>-CURRENT_LINE.
After the read operation the field contents are placed in the header line of the internal table. If the fields in the table control have the same name as the internal they will be filled automatically. Otherwise we need to write a module to transfer the internal table fields to the screen fields.
We must reflect any changes the user makes to the fields of the table control in the internal table otherwise they will not appear when the screen is redisplayed after PBO processing, (eg, after the user presses Enter or scrolls) However, this processing should be performed only if changes have actually been made to the screen fields of the table control (hence the use of the ON REQUEST)
PROCESS BEFORE OUTPUT.
LOOP AT ITAB_REG WITH CONTROL TCREG
CURSOR TCREG-CURRENT_LINE.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
MODULE MODIFY_ITAB_REG.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2 (table control fields = dict. fields)
If using a LOOP statement without an internal table in the flow logic, we must read the data in a PBO module which is called each time the loop is processed.
Since, in this case, the system cannot determine the number of internal table entries itself, we must use the EXIT FROM STEP-LOOP statement to ensure that no blank lines are displayed in the table control if there are no more corresponding entries in the internal table.
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TCREG.
MODULE READ_ITAB_REG.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG
ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE READ_ITAB_REG OUTPUT.
READ TABLE ITAB_REG INDEX TCREG-CURRENT_LINE.
IF SY-SUBRC EQ 0.
MOVE-CORRESPONDING ITAB_REREG TO TCREG.
ELSE.
EXIT FROM STEP-LOOP.
ENDIF.
ENDMODULE.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
MODIFY ITAB_REG INDEX
TCREG-CURRENT_LINE.
ENDMODULE.
Updating the internal table
Method 1
PROCESS AFTER INPUT.
LOOP AT ITAB_REG.
CHAIN.
FIELD: ITAB_REG-REG,
ITAB_REG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Method 2
PROCESS AFTER INPUT.
LOOP WITH CONTROL TCREG.
CHAIN.
FIELD: TCREG-REG,
TCREG-DESC.
MODULE MODIFY_ITAB_REG ON CHAIN-REQUEST.
ENDCHAIN.
ENDLOOP.
MODULE MODIFY_ITAB_REG INPUT.
MOVE-CORRESPONDING TCREG TO ITAB_REG.
ITAB_REG-MARK = u2018Xu2019.
MODIFY ITAB_REG INDEX TCREG-CURRENT_LINE.
ENDMODULE.
Updating the database
MODULE USER_COMMAND_100.
CASE OK_CODE.
WHEN u2018SAVEu2019.
LOOP AT ITAB-REG.
CHECK ITAB_REG-MARK = u2018Xu2019.
MOVE-CORRESPONDING ITAB_REG TO TCREG.
UPDATE TCREG.
ENDLOOP.
WHEN u2026
u2026
ENDCASE.
ENDMODULE.
Hope this will solve your problem.
Regards,
Pavan.
Edited by: PAVAN CHANDRASEKHAR GANTI on Aug 3, 2009 12:48 PM

How to populate data from table into datagrid in form

hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks

Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

How to transfer data in table control in bdc

hi
how to transfer data in table control in bdc . I need the theory regarding this
bye

Hi,
just check in the forum , there is many threads available to ur questions.
Table control in BDC
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
You can even refer to these related threads
bdc table control
Re: table control in bdc
table control in BDC
Reward if helpful.
Thanks
Naveen khan

Combining Apps tables & custom data mart tables in the same EUL?

Has anyone tried to do this? We have a situation where the data mart tables are specifically for sales reporting, but we need to combine this with Apps data that is not being captured in the sales data mart table. The data mart table are Oracle tables, but not Apps tables.
How would this work? Would you have to use an Apps mode EUL? I'm not sure how the security would be used - would the responsibilities have any impact on the data in the data mart tables?
Any thoughts would be greatly appreciated. Thanks.

Hi user11256032, I just stumbled upon this by accident. The reason no-one has answered yet, is because it is in the wrong forum. (I can understand that you thought it belonged here.) Please post the question to the Oracle Utilities forum, which is here Utilities If that link doesn't work, go to Forum Home, then choose Industries, then Utilities. You may have to select "More ..." on Industries.
Actually, I suspect there was an SR created for these, so your question may have been answered already.
If you don't mind me asking, which customer is this for?
Jeremy

How to retrieve data from table(BOM_ITEM)

Hi All,
I wrote webservices using axis1.4 to get BOM information from SAP.. funtional module is CAD_DISPLAY_BOM_WITH_SUB_ITEMS
webservices works fine..I'am able to retrieve data from Export Parameter..But not able to retrieve data from table
How to retrieve data from table(BOM_ITEM)..?
Cheers, all help would be greatly appreciated
Vijay

Hi,
1. Create Page Process.
2. Select Data Manipulation
3. In category select "Automated Row Fetch"
4. Specify process name, sequence, select "On Load - Before Header" in point.
5. Specify owner, table, primary key, and the primary key column(Item name contains primary key).
6. Create a process.
7. In each item select "Database Column" in "Source Type".
Regards,
Kartik Patel
http://patelkartik.blogspot.com/
http://apex.oracle.com/pls/apex/f?p=9904351712:1

How to create a temp table in the memory, not in disk?

in sql server, you can create a temp table in the memory instead of disk,
then you can do the insert, delete,update and select on it.
after finishing, just release it.
in Oracle,
I am wonderfing how to create a temp table in the memory, not in disk?
thanks,

Thanks for rectifying me Howard.
I just read your full article on this too and its very well explained here:
http://www.dizwell.com/prod/node/357
Few lines from your article
It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they donâ€™t swamp themselves, and start causing each other to age out back to disk.
Thanks and Regards

How to bind a UI element to the context

Hi Experts,
 I have a problem binding UI element to the context. In my code i have to create TabStrips dynamically and under this tabstrip number of UI elements would be there. For this i have a code like this..
IWDTransparentContainer theActionContainer =(IWDTransparentContainer)view.getElement("RootUIElementContainer");
 IWDTabStrip ts = (IWDTabStrip) view.createElement(IWDTabStrip.class,"TabStrip");
 IWDTab tab1 = (IWDTab) view.createElement(IWDTab.class,"Tab1");
 IWDInputField in = (IWDInputField) view.createElement(IWDInputField.class,"in");
 IWDCaption header1 = (IWDCaption) view.createElement(IWDCaption.class,"Header1");
 header1.setText("Tab1");
 tab1.setContent(in);
 ts.addTab(tab1);
 IWDTab tab2 = (IWDTab) view.createElement(IWDTab.class,"Tab2");
 IWDInputField in2 = (IWDInputField) view.createElement(IWDInputField.class,"in2");
 IWDCaption header2 = (IWDCaption) view.createElement(IWDCaption.class,"Header2");
 header2.setText("Tab2");
 tab2.setHeader(header2);
 ts.addTab(tab2);
 theActionContainer.addChild(ts);
when i run this code it is giving following exceptions..
The initial exception that caused the request to fail, was:
 com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Property 'value' of AbstractInputField with id 'in' in view 'LoginView' must be bound to the context
 at com.sap.tc.webdynpro.clientserver.uielib.standard.impl.AbstractInputField.getValue(AbstractInputField.java:1260)
 at com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.InputFieldAdapter.getValue(InputFieldAdapter.java:582)
 at com.sap.tc.ur.renderer.ie6.InputFieldRenderer.render(InputFieldRenderer.java:56)
 at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:435)
 at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:134)
 ... 63 more
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Property 'value' of AbstractInputField with id 'in' in view 'LoginView' must be bound to the context
 at com.sap.tc.webdynpro.clientserver.uielib.standard.impl.AbstractInputField.getValue(AbstractInputField.java:1260)
 at com.sap.tc.webdynpro.clientserver.uielib.standard.uradapter.InputFieldAdapter.getValue(InputFieldAdapter.java:582)
 at com.sap.tc.ur.renderer.ie6.InputFieldRenderer.render(InputFieldRenderer.java:56)
 at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:435)
 at com.sap.tc.webdynpro.clientimpl.html.renderer.uielements.base.RenderManager.render(RenderManager.java:134)
 at com.sap.tc.ur.renderer.ie6.TabStripRenderer.renderTabStripItemContentFragment(TabStripRenderer.java:1867)
 at com.sap.tc.ur.renderer.ie6.TabStripRenderer.renderTabStripFragment(TabStripRenderer.java:838)
From these exceptions what i understood is, i need to bind these UI elements to context.
 Can any body tell me how to bind a UI element to the context if I understood the exceptions correct..
Thanks in Advance,
Murthy.

HI,
lets say Ctx is your context attribute,
IWDAttributeInfo attrInfo = wdContext.getNodeInfo.getAttribute("Ctx");
then , as per your code,
IWDInputField in = (IWDInputField) view.createElement(IWDInputField.class,"in");
in.bindValue(attrInfo);
if your contex attribute is child of some other node then do like this,
IWDAttributeInfo attrInfo = wdContext.getNodeInfo.getChildNode("SalesOrder",0)getAttribute("Ctx");
//this is when Ctx is child of node SalesOrder, and we are taking Ctx from its 0th element
then ,
IWDInputField in = (IWDInputField) view.createElement(IWDInputField.class,"in");
in.bindValue(attrInfo);
include this in your code ,
let me know if you face any problem
regards
reward points if it helps

How to insert data into table control

hi experts,,
i have inserted data into data base table through table control .
now i want to insert data into table control through database table.
how to delete data from table control for selected row

Hi
go through this link.
http://www.****************/Tutorials/ABAP/TableControl/Demo.htm

How to bind data to table in the view

Similar Messages

Maybe you are looking for