Template and format printing problem

Hello I have pages 08 in French installed on my Intel Imac; the problem I am experiencing is when using a pre-defined template,
I open a template such as elegant letter (which has borders) I format all my text and graphics I then do a print preview which shows everything is good but when I print I am missing the bottom part of the border and the information, I have noticed that my default printer setting is set to A4 but when I change it to letter format I still am missing the bottom of the sheet, does anyone know how to solve this problem
Thank you !

Similar Messages

Formatting/Printing Problem

I am new to Pages, so maybe someone can help me... I put together a newsletter, using one of the templates, in Pages 06. It says it is set up to print on an 8.5x11 paper, the rulers confirm it in Pages (both visually and in Print SetUp), but when I go to print, it shrinks the document and moves it to one corner of the page. It is exporting into pdf the same way. I don't know whether it's a formatting problem or a printing problem, but I need it to cover the entire page and be the correct size. Any help would be great!

Welcome to Apple Discussions
Do you have Comments turned on? In Pages 2/iWork '06, there is no warning when you go to print.

Adobe Photoshop CS6 and Canon printer problem!!

Use Photoshop CS6 to edit and print (try to print) to a new Canon Pixma Pro-100 printer. Photoshop is up to date and the Mac runs OS 10.8.5 - Canon printer driver is current at ver. 11.7.1.
When I print from Photoshop to the Pro-100 (let's say a 4X6 landscape snapshot to 4X6 borderless paper) the printer starts up and moves the paper out about 4 inches and then prints the
first two inches of the image, stops and ejects the paper!. I've tried different versions of printer the printer driver and made sure every things is up to date. However, I can print from MS Word,
Nikon Capture NX2, or Canon's own Print Studio Pro and it works fine. Canon is no help because if it works OK with their Print Studio Pro then it's not their issue - I tend to agree with them.
The same thing happens print from Photoshop to 5X7 or 8X10 paper - it gets ejected so far and then only prints part of the image. I've searched the Internet and posted in Forums but can't find
where any one would have the same problem. What I'm hoping for here is someone at from Adobe who's knows Photoshop tech stuff will post here with suggestion because there is no more
phone support for Photoshop CS6. I'd like to really keep this printer and get Photoshop to work with it but if I can't I'm going to offer it up free to a good home! JM Davis

Thanks for your answer, indeed this fixed the problem. Quite stupid I did not see this myself

OS10.8 and HP printer problems

I'm having problems printing wirelessly with my MacBook Pro OS10.8.4 and my HP Officejet Pro 8500A.
Initially I had no problems at all. However now, I can print in colour, but each time I select black and white printing the printer crashes (lights flashing and a message to turn the printer off).
HP have been very helpful and replaced the printer. It worked fine for a while, but now it's happening again. Interestingly, I have no problems printing using my MacBook Air under OS10.7.
Any ideas?

I would recommend that you first update the firmware on the printer by using the download at the following link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-94588-3 &cc=us&dlc=en&lc=en&os=4142&product=4116838&sw_lang=
After that, go into system preferences and select Print & Scan. Right click the rectangle listing your printers and select "Reset Printing System"...Warning: this will delete any other printers installed.
After that, go to the following link and download the most recent version of software available for your OS and printer: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-108394- 1&cc=us&dlc=en&lc=en&os=4142&product=4116838&sw_lang=
Install that and let me know if it helps.
Best of luck,
Kyle

ALV Grid and Icon : Printing Problem

Hi, i develop some reports using ALV Grid and Icon and i'm facing printing problem, all report that using ALV grid with the option icon = 'X' cannot print properly, all the character field showing improper icon instead of the text. While all the ALV grid report with the option icon = ' ' can print normally.
Thanks.

Hi,
Check the Demo Program <b>BCALV_DEMO_TOOLTIP</b>, Here i am able to see the Output Properly, and also able to Print them.
Regards
vijay

WRT300N and network printer problems

I have a pc wired into the router and a printer wired into it as well, they work fine. I have a laptop that can access the router wirelessly and it can get out to the internet. When I use the laptop to try and find the printer using the printer setup wizard its not found on the network, all i get is the microsoft windows network option. The Printer is an HP 7780 model and has the wireless option, went with the the cable to try and limit complications. Any help with this would be greatly appreciated.
Thanks.

Depending on the operating system (Windows XP) go to the control panel and click on the Network Wizard and set up both computers and during the wizard it will give you the option to enable File and printer sharing. After you set up your network you should be able to see the other PC and printer from each printer. Also make sure you have TCP/IP enabled by clicking on start>control; panel>Network connections and right click on the LAN (wired or wireless depending on which one it is) and clicking on properties. In there make sure TCP/IP is checked. You may have to install any software on each PC that came with your printer.
Richard Aichner (Ikester)

PS CS5 PDF Large Format Printing Problem

I had to create a file for a sign (9 feet by 20 feet - 100 dpi) in PS CS5. Problem is I now need to send it to the sign printer. I need to make a PDF from the file but the save as makes the file size bigger than the PSD even with changing the compression settings. The other problem is I cannot print to PDF as when I try that the Acrobat X save as dialogue box never appears. The screen just goes back to the artwork. I have deleted the preferences, reinstalled Acrobat, etc. What can I do here?

To maintain vector output capability from Photoshop in PDF you can't output PDF by way of printing and using Acrobat Distiller. From the File Menu you choose Save As and then select Photoshop PDF from the list of file formats. It will retain vector data from embedded fonts and vector shape layers. I just tested it using Photoshop CS 5.5 64-bit and then viewing the results in Acrobat X.
That being said, Photoshop is a crude tool for passing along vector-based artwork. I don't like the vector shape layers feature very much at all because I find it very user un-friendly. I very much prefer to use Adobe Illustrator in conjunction with Photoshop. It's so much easier to control. I often paste AICB formatted paths into Photoshop's paths palette via the clipboard and then use the vectors as sources to create fills and other things. I'll manually create clipping paths on photos in Photoshop and save TIFF images with the clipping paths active to knock out the background when placing the TIFF in an InDesign or Illustrator layout. I'll create other vector objects in Photoshop to later export in .AI format to Illustrator. Ultimately the end result winds up in Illustrator as a single page layout or in InDesign as a multi-page layout. Both Illustrator and InDesign are far more capable than Photoshop at combining vector-based art and raster-based art together. When you save a PDF from InDesign or Illustrator there is no doubt your raster content and vector content will remain intact. Like the solution with Photoshop, in InDesign and Illustrator you simply choose to save the file in PDF format. No need for using the print to PPD and Acrobat Distiller post process step. Distiller comes in very handy for creating PDFs from lots of non-Adobe applications.

Paper Design Printing and PDF printing problem

I'm using Report Builder 9.0.2.0.3 to create a report that I create a frame , in the frame i cut and pasted text by clicking on the A then pasting the text into it.
I then created a frame with that was at the next level in the object manger with a hyperlink in it. This fame was at the level where the text was that I pasted in the paragraph above. I placed it in the PaperLayout where I wanted it and ran the paper report and it look just fine in the PaperDesign Layout and all so when I create the PDF format and the link works in PDF. But when I print the paperlayout the link prints down a few lines on the page. When I print it through the PDF browser, it prints ok, only the paperlaout has a problems. I pasted the whole page of text before I placed the link where I wanted it.
Is there something else I can try? Appreciate any suggestions or explain, why it moves.
I even got the link to be the color blue.

If I understand the question correctly, you have a static boilerplate text which has some paragraphs. To add hyperlink to some part of the text(not the whole text object), you are placing a frame on top of that particular line of text.
When you Run to Previewer
(or File->Preview Format->PDF/HTMLCSS/..), Report uses screen surface for Fonts and you see it correctly.
However, when you print it from Reports or do File->Generate to File->PDF/HTMLCSS/.., Reports uses the default printer's Fonts for formatting. This means that there could be a slight difference in how the text is formatted in the output as the font metrics for the text might be different. The frame containing the hyperlink might be in the same place where it was placed, however the text might have formatted differently. The text which was overlapping with the frame might have formatted little above or below the frame.
To solve this, instead of using separate frame for hyperlinking texts, you can divide your text and create separate boilerplate text objects for the text which needs to be hyperlinked. You can set the hyperlink property in the Property Inspector of this object. This way, the hyperlinks will be proper in all cases.
regards,
Siva

PDF format printing problem... (complex 6i reports conversion to 10g)

Hi All,
I hope somebody has solved this problem and could give me a hint. We have a lot of complex reports in 6i (client\server) and PDF format is the only option for us in 10g, I believe.
The previews of the report in 6i and 10g (PDF format) are very similar. When we send the report to the printer from 6i preview, the printout also looks the same as in the preview (with about 3mm sides margin), but when we print a PDF version of
the report with the default settings for Acrobat Reader, the printout gets huge
margins and it is absolutely unacceptable for our company. When we change “Page Scaling:” to “None” in Acrobat Reader printing settings, some information of the report doesn’t get printed on the paper (being cut off). This report has a landscape orientation and a legal paper size and these settings are also setup in the printer driver as default (for Oracle PDF writer). The testing was done on the developer workstation with local OC4J and a local report server (10g iDS).
I also tried to generate this report into PDF file by Oracle 6i Reports (client-server). Same problem. In Acrobat in looks fine, but in Acrobat preview, it only looks OK
when "Page Scaling:” is set to “None”, however, when it gets printed the report
data is being cut off (left and top parts). If "Page Scaling" is set to "Fit to
Printable Area" (default), the report on paper gets resized with huge margins.
I hope it is not an Acrobat Reader v8 problem.
Thank you

Hi,
Was it a character mode report? While converting character mode reports to bitmap reports you have some layout problems. You might be facing similar issue it seems.
And there are many other formats supported by Reports 10g, not only pdf.
Br,
Gouri Sankar

SmartWebPrinting and related Printer problems.

I cannot uninstall websmart printing through teh control panel. Nothing happens when I click "uninstall." Ther is no indication that anything is woriking ans I have waited for hours.
Each time I open the internet, there is a error message indicating that some file is missing and to try to locate the "tratapps.mis". but I have no idea where such a thing is located.
All that seem to be related.
I have major problems with my HP psc 1315 printer, but no way to re-install. It only goes as far as connect the USB and freezes -- with or without the USB plugged in. Pluggin in the USB does nothing.
This question was solved.
View Solution.

Hi cgmclellan2000,
Thank you for being a member of the HP Support community. I understand that you have run into difficulties when trying to uninstall HP’s Smart Web Printing software.
I have included the full link (it is rather long) to the document titled “HP Printing Products - HP Smart Web Printing Software Replaced by HP Smart Print”. Step One in the document walks you through how to uninstall the software from your computer. Once you have completed the removal, it also would be prudent to check the add-ons for your browser to ensure the add-on is disabled.
HP Printing Products - HP Smart Web Printing Software Replaced by HP Smart Print
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?sp4ts.oid=303752&spf_...
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Mac mini, Safari and HP printing problems

Just got a Mac Mini in March. I don't know if this is a Mac problem, an HP problem, or a browser problem.
I simply cannot seem to get it to print web pages in any usable way from Safari. I even downloaded Mozilla Firefox, and it isn't really any much different. For example, I used to be able to log on to my bank and print off the current transactions page, either the whole thing or highlight and print a selected number of pages. My old HP2110xi printer worked GREAT with our PC.
Now, with Safari, it prints only the visible frame, cuts off mid way, or spits out page after page of blank paper. I tried highlighting the page, copying it and either pasting it into a Word document (doesn't work too well because it totally destroys the format) to print or saving it as PDF. It still won't give me the entire printout of the whole document, and acts like it doesn't even see it ( just spits out blank pages)
I downloaded the updated software from the HP site, and since this seems only to be a problem with printing from the internet, I know it has to be related to the way Apple based browsers work with it. One hint I have is that the whole format for the Print commands is totally different, and requires that I reset the print quality, etc., each and every time I print a document.
Any suggestions?

Is there a check box option for something like "Fit to page"? I once had a similar problem (not with an HP printer) and unchecking that box did the trick. Don't know why.

InDesign CS4 Export and PDF Printing Problem

Whenever we print PDFs created from InDesign CS4 documents that contain transparencies, drop shadows or gradients we've been having issues. White boxes will appear instead of the drop shadows and transparencies, and the colors of the gradient images will be completely different from what's in the original file. Of course, the PDF always looks perfect on the screen, and the .indd document prints correctly. The problems only occur when we print the PDFs.
We create the PDFs in InDesign using the File>Export function, and we've tried every version of PDF compatibility from 4 to 8. We're not exactly sure if this is an InDesign issue or an Acrobat issue, but we wanted to check and see if there's something specific we need to do doing during the exporting process to prevent this from happening.
Our IT department has been working on this but they're stumped, and the fine folks at Xerox insist that our printers are "fully operational."
We quickly looked through previous postings and didn't see another problem like this one listed, but we apologize if this has already been addressed and we are posting the same issue twice.
Any suggestions or insight anyone can offer is greatly appreciated. Thank you.

Thanks Bob! I followed the information the links you provided and it solved our problems! I won't bore you with the details of how long how many different people have been trying to solve this issue, but let's just say it's a lot.
You are being virtually hugged and/or high-fived by our entire Communications, IT and Printing Departments. THANK YOU!

Microsoft Word Templates and ActiveX Control Problems

Hi,
I am experiencing a strange problem in Microsoft Word. I am writing a VBA application which displays a cwgraph in a form. If I add the graph to a form in the Normal.dot template the control is fine. If I add the graph to a form in a new template (where all my code is) the graph displays evaluation copy. The graph in the Normal.dot template is fine and displays without the licensing information and in the properties it displays the correct licence code etc.
Has anyone experienced this before and got any suggestions.
Thanks in advance.
Regards.
Joe

Jon.
Thanks for the reply. I have already run the license fixer utility and it does not locate any broken licenses. I have also uninstalled everything and deleted cwui.ocx in System32, then reinstalled and tried again. The strange thing is that it works in Visual Basic standalone, in the normal.dot template in Word. It just doesn't work in a different template file.
Thanks.
Joe

New update and HP printer problems

I recently installed some automatic updates for my computer, including the MacBook SMC Firmware update along with something else that was recommended (but I don't remember what it is). Immediately afterwards, I began having printer issues (ie, I could no longer print). I then fiddled around, attempting to reinstall my HP software. However, I encountered a major problem when my computer wouldn't recognize that there was a printer on my wireless network. I had never had this issue before and another wireless computer could still print perfectly on the same printer. I called Mac and they could not solve the problem. Then, after an hour and a half on the phone with HP, we finally got the computer to recognize that there was indeed a printer on the network. In order to solve this problem we had to reset the entire printing system, manually delete any HP files from my computer, and then reinstall the latest version of the software. I just wanted to voice my concern that the latest updates are not compatible for some reason with HP printing software already installed. If you are having the same problem, you may have to start from scratch to fix it. When I called HP, they said that had been getting identical calls all morning due to this update.
MacBook - White Mac OS X (10.4.7)

Go to your application folder > open utilitis folder > and click on disk utilities.
Select the hard drive and repair the permission.
http://docs.info.apple.com/article.html?artnum=25751
Hope it will resolved it
Good Luck

Migrating from CR9 to CR11 Release 2 and Printronix Printer problem

Hello,
Currently we are in the midst of migrating all of our report for one of our main application from CR 9 to CR11 R2. The entire migrating, importing, as well as publishing for tall the report runs smoothly. We even can view the report once we called up the report from the repository to be displayed in its infoview. But my question is:
1. Is there any way that the report can auto adjust its size once the report been print out? This is because I believe in CR 9, ( we are using RAS9 btw) once printe out; the report will be automatically adjusted, different than the CR 11 which is WYSWYG. This has caused some of the report layout been out-of-margin as well font sizing are not the same anymore (sometimes big and sometimes too small) and not the same as per old (CR 9 version) report.
With this explanation, it is hope you guys or any of your team can give me some solution or advice on how for me to cater this problem.
2. Another thing that I need to clarify with you guys is does CR 11 being supported by Printronix 5000 series of printer? This is because when the same title report when being generated from CR 9 and CR 11 both will come out in a different output/ result.
CR 9 is a readable but yet in CR 11 which I believe is a WYSWYG Windows Generic Text driver report application wonu2019t be able to print out nicely as some of the font is smudge and not readable. If this is the case, I need a clarification from you guys as whether the printer is being supported or not?

Hi Daniel,
Where are you seeing the differences, in Crystal Reports or through BusinessObjects Enterprise? If it's from BOE, make sure you have the Printronix printer driver installed on the Page Server machine, and that the Page Server service is running under a domain account that has local admin rights.
Regards,
Wallie

Template and format printing problem

Similar Messages

Maybe you are looking for