How to bind ppp0 interface (PPTP) as 'external' in proxy server?
Hi!
I'm trying to bind ppp0 interface (PPTP VPN) as 'external' interface in proxy server (Tinyproxy). Unfortunately it does not work.
Using route add -net default gw 10.9.0.1 I can make all the traffic go via VPN but this is not what I want.
My routes after ppp0 is up:
default 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
10.9.0.1 * 255.255.255.255 UH 0 0 0 ppp0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
216-18-212-218. 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0
ifconfig:
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.100 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::21d:60ff:fe25:7ad6 prefixlen 64 scopeid 0x20<link>
ether 00:1d:60:25:7a:d6 txqueuelen 1000 (Ethernet)
RX packets 47533 bytes 31947804 (30.4 MiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 44946 bytes 6618945 (6.3 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 13167 bytes 1604741 (1.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 13167 bytes 1604741 (1.5 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1496
inet 10.9.34.125 netmask 255.255.255.255 destination 10.9.0.1
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 1088 bytes 568896 (555.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1328 bytes 167081 (163.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Do I need to add some other, specific route? What IP Tinyproxy 'external' should be bound to (I've tried both gw and peer)?
In your bpel.xml you will find a mapping of the "client" partnerlink to the wsdl.
It's structure will look like this:
<partnerLinkBindings>
<partnerLinkBinding name="client">
<property name="wsdlLocation">defaultWSDLFile.wsdl</property>
</partnerLinkBinding>
</partnerLinkBindings>
This will map to the .bpel file as follows:
<partnerLinks>
<partnerLink myRole="..." name="client" partnerLinkType="..."/>
</partnerLinks>
In your first BPEL activity (can be a receive or onMessage activity. But will have the create instance checkbox checked), the operation used maps to the wsdl:
<receive name="Receive_Message" partnerLink="client" portType="..." operation="..." variable="Receive_Message_InputVariable" createInstance="yes"/>
So to change the wsdl, you must first change your descriptor (bpel.xml) and after this your .bpel file so it will use the operation defined in the new .wsdl file.
A good convention is that the .bpel file and the .wsdl file have the same name.
Good luck!
Melvin
Similar Messages
-
Hi,
I create a user defined watch for BI4.1 ExplorerExplorationServer server in CMC -> Monitoring.
Caution:
node.ExplorerExplorationServer$'Server Running State'==1 ||
node.ExplorerExplorationServer$'Server Running State'==2 ||
node.ExplorerExplorationServer$'Server Running State'==4 ||
node.ExplorerExplorationServer$'Server Running State'==6 ||
node.ExplorerExplorationServer$'Server Running State'==7 ||
node.ExplorerExplorationServer$'Health State'==1
Danger:
node.ExplorerExplorationServer$'Server Running State'==0 ||
node.ExplorerExplorationServer$'Server Running State'==5 ||
node.ExplorerExplorationServer$'Health State'==0
However, in CMC -> Servers -> Explorer Services, the ExplorerExplorationServer shows "Information is not available" blue ball in Health.
How do I bind the user-defined watch to a specific server so that server's Health would show green ball and is linked to Monitoring watch?
Regards,
Jin-ChongHello JinChong,
We had created User-defined Explorer watches on our environments and have run into issues.
Have received many false alerts even though Explorer servers are running fine.
After creating an AGS case it was informed to us that Explorer does not have monitoring capabilities.
AGS is checking with solution architect of Explorer application about when the monitoring watches for explorer would be included.
Regards,
Rohit -
How to bind the java client stub and the C++ server's skeleton?
hi, i'm currently working on a project which a java client invoke a C++ object.
i've wrote the idl and compile it using idl2cpp and a object is created.
then i try to compile my java client using vbjc Client. it was done without errors.
but when i try to run the client (after i run the smart agent and the C++ server) using vbj Client, it promts error which fail to load the class Client.java
and i've try to run my java client using jre (java Client), the program throws exception --> org.omg.CORBA.BAD_PARAM: minor code: 0 completed: No
so, wat's wrong with my codes actually??
it's urgent and i really need you all's help...
thanks a lot...below is my code:
TimeObject.cpp (C++ server)
#include "TimeImpl.h"
// USE_STD_NS is a define setup by VisiBroker to use the std namespace
USE_STD_NS
int main(int argc, char* const* argv)
try {
// Initialize the ORB.
CORBA::ORB_ptr orb = CORBA::ORB_init(argc, argv);
/* // Initialize the BOA
CORBA::BOA_ptr boa = orb->BOA_init(argc, argv);
// Create the Time object
POA_Time::TimeSetting timesetting = new TimeSettingImpl("My TimeSetting");
// Export the newly created object
boa->obj_is_ready(timesetting);
// Ready to service requests
boa->impl_is_ready(); */
// get a reference to the root POA
CORBA::Object_var obj = orb->resolve_initial_references("RootPOA");
PortableServer::POA_var rootPOA = PortableServer::POA::_narrow(obj);
CORBA::PolicyList policies;
policies.length(1);
policies[(CORBA::ULong)0] = rootPOA->create_lifespan_policy(
PortableServer::PERSISTENT);
// get the POA Manager
PortableServer::POAManager_var poa_manager = rootPOA->the_POAManager();
// Create myPOA with the right policies
PortableServer::POA_var myPOA = rootPOA->create_POA("sntp_poa",
poa_manager,
policies);
// Create the servant
TimeSettingImpl timeServant;
// Decide on the ID for the servant
PortableServer::ObjectId_var managerId =
PortableServer::string_to_ObjectId("TimeManager");
// Activate the servant with the ID on myPOA
myPOA->activate_object_with_id(managerId, &timeServant);
// Activate the POA Manager
poa_manager->activate();
CORBA::Object_var reference = myPOA->servant_to_reference(&timeServant);
cout << reference << " is ready" << endl;
// Wait for incoming requests
orb->run();
catch(const CORBA::Exception& e) {
cerr << e << endl;
return 1;
return 0;
Client.java:
import java.net.*;
import java.io.*;
import java.util.*;
import java.lang.*;
public class Client
public static void main(String args[]) throws IOException, InterruptedException
try
// Initialize the ORB
System.out.println("Initializing the ORB");
org.omg.CORBA.ORB orb = org.omg.CORBA.ORB.init(args, null);
// Get the manager Id
byte[] managerId = "TimeManager".getBytes();
System.out.println("get the manager id");
// Locate an account manager. Give the full POA name and the servant ID.
Time.TimeSetting time =
Time.TimeSettingHelper.bind(orb, "/sntp_poa", managerId);
System.out.println("bind the object");
// Bind to the TimeSetting Object
//System.out.println("Binding to TimeSetting Object");
//Time.TimeSetting time = Time.TimeSettingHelper.bind(orb, "My TimeSetting");
SntpClient client = new SntpClient();
long Offset = client.synchronizeTime();
// Set offset
System.out.println("Setting offset to" + Offset);
time.offset((long)Offset);
// Set the system time
System.out.println("Setting system time");
time.SetTime();
} catch (org.omg.CORBA.SystemException e)
System.out.println("System Exception");
System.err.println(e); -
Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
RE : How to bind to two interfaces
Gabriel,
You can advertise an environment on two ip addresses
by using multiple IP addresses instead of one in
FORTE_NS_ADDRESS. Specify the IP addresses separated by semicolon
setenv FORTE_NS_ADDRESS ip1:5000;ip2:5010;ip3:5012
You will also have to define FORTE_LOCATIONS to point
to these IP addresses so that Forte runtime knows where
to find the environment and services. In this case you
will always use the socket number 0 to allow Forte to
pick any available socket.
Ajith Kallambella M.
Subject: How to bind to two interfaces
Hi!
On one of our Solaris servers we are facing the problem that we have
two
network interface cards in it.
And we would like to access Forte on it through both cards. (avoid
unnecessary network traffic)
As far as I understand Forte needs a fix IP address to bind to (thus
bound to one card).
I tried to use 0.0.0.0 as a jolly-joker for all cards, but failed.
Has anybody an idea? Or is it a restriction?
If so, does Forte plan to improve the product in this way?
GA'BRIEL, A'kos ([email protected]) Fax: (+36-1) 4312-977
UNIX & Internet consultant Phone: (+36-1) 4312-979
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive
<URL:http://pinehurst.sageit.com/listarchive/>
Get Free Email and Do More On The Web. Visit http://www.msn.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hello
I assume you want to create multiple instance of your class.
Assuming that you class is NOT a singleton then simply repeat the CREATE OBJECT statement as many times as you need.
TYPES: begin of ty_s_class.
TYPES: instance TYPE REF TO zcl_myclass.
TYPES: end of ty_s_class.
DATA:
lt_itab TYPE STANDARD TABLE OF ty_s_class
WITH DEFAULT KEY,
ls_record TYPE ty_s_class.
DO 10 TIMES.
CLEAR: ls_record-instance.
CREATE OBJECT ls_record-instance.
APPEND ls_record TO lt_itab.
ENDDO.
Regards
Uwe -
How to bind complex input/output types in web service data control
Hi,
I have created data control using external web service for simple input & output data type and its working fine.
But I don't know how it can be done for complex data types.
My external Web services have complex input & output types. Such as java object which contains another java object again it contains another java object or arry or java collection etc.
Each my service has one complex input data type and for this no user input is require so how I can do it without using any component for it.
I want to bind my page components with this input & output type.
What is the best approach to do this and how to bind screen component.
Regards,
DevangHi,
Thanks frank.
I already check this link before posting this so if you have any other link then kindly reply.
Regards,
Devang -
I want how to bind NavigateToURL window to inside of Flex Mdiwindow.
Hi Friends,
I want how to bind NavigateToURL window to inside of Flex Mdiwindow.
If have any Possible to slove this problem.possible means please help to me.
navigateToURL code:
var loc_menuaction:String="/ist_docStor/file_access/upload_to_docstor.cfm";
var urlmenu:URLRequest= new URLRequest(loc_menuaction);
navigateToURL(urlmenu);
Thanks,
Magesh R.What do you mean when you say you want to bind navigateToURL? Is that mean you want to open an external webpage within Flex UI? If yes, then it is possible with AIR applications but not with web applications.
-
After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually. -
I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun -
How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!
Hi, did you try iTunes>File>Import?
-
I can't figure out how to save my events onto an external hardrive
I have been looking at the event libraries and everywhere to figure out how to save my files onto an external hardrive. I currently use FCPX to edit Call of Duty Montages for people as my job so I need this to work. I don't know what I'm doing wrong and I really need storage.
In the Copy Files Into: field there is a pop up that allows you select where your media is copied to.
Looking at the above screen shot if I want files to be copied to my External LaCie drive I just tick that one.
Firstly you will have to create at least one Library on the External to send it there.
There is the CHOOSE option that allows you to navigate anywhere on the the system to manually select a destination.
Al -
Hello,
on my page I have 2 items:checkbox and text area. How to bind its work processes together? For example, when checkbox is checked then Text area is disable and when not then enable.
Thanks' for help.
Karina.hi karina--
this, too, is javascript question. please see my answer to your previous post...
Multiselect list (LOV)
...regards,
raj -
How to download a pdf file in external storage(sd-card) not use a isolated storage wp8
i have a url for download pdf file return by webservices
and i have attach this link in hypertext button this is start a download but in browser . and when i am google for this purpose the give me "
Background file transfer
" Process and then code is also using a isolated storage but i want a external storage process Please Help me
how to download a pdf file in external storage(sd-card) not use a isolated storage wp8Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}}) -
How do I reconnect my PPTP vpn after upgrading to Yosemite
How do I reconnect my PPTP vpn after upgrading to Yosemite on my mac mini
See:
http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
http://kb.mozillazine.org/Lost_bookmarks -
How can i copy files from one external hard disk to another using macbook pro with retina display
How can i copy files from one external hard drive to another using macbook pro with retina display?
That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton
Maybe you are looking for
-
When I hook my ipod up to my mac I used to get the Itunes has detected an ipod that appears to be corrupted error message. It would then sync all my song to the ipod but when I ejected it, none of the songs would be on the ipod. Now I hook it up and
-
How can I include Customer Hierarchy in Customer master IDoc -DEBMAS06 ?
Hi, I am generating Customer master IDoc using basic message type DEBMAS06. But when I include customer hierarchy data while creating customer master, it is not included in any of the segments. The segment containing the data from KNVH is not include
-
HT1711 why do I have to double click everything now in itunes?
Hello everyone, I'm not an expert on the Itunes program so this could be a dumb question, but I'll try to explain this in clear detail and be as brief as possible. Earlier versions of Itunes did not have this feature or issue, so it was when I update
-
NW04S SR1 installation stops in phase 26 - import MAXDB statistics
Dear Forum, During the installation of Netweaver 2004S SR1 on a MS Windows Server 2003 64 bit environment, the installation stops in phase 26 - import MAXDB statistics. I looked in the XCMDOUT.LOG file and tried to recreate the index. I allready upda
-
File or assembly name SAP.Connector, or one of its dependencies not found
Hello there, Something very strange is overcoming me when experimenting a little bit with the SAPConnector: I developped a class that is accessing the proxy-class generated by the SAPConnector wizard and I have put it into a class library. No problem