How to: Blank row on report between break group

Hello,
I'm using AppExp 2.2.1.00.04. I have a report region(based on a sql query) with 5 columns, the first column is the break column. I am using the query specific column (named columns?) setting. How can I get the formatted output to have a blank row between the different sections(break groups)?
Example:
Col1 Col2 Col3 Col4 Col5
HR Smith J. dfs dfsf
Jones H. djfsj skdfjsl
SALES Green K. sdjfks jkjlkj
Smith B. jkjkj jkljl
I'm not sure if I should be looking in to a row template (never created one of those), or if this can be accomplished by using one of the fields supplied for break formatting (the "display this text before break columns")?
Thanks,
Marty

Hi, I have a working method, and I wanted to post it in case anyone was trying to do what I was.
First, I picked a column that I was selecting (but not displaying) and clicked on the Sum checkbox (the break formatting fields only work when you are also summing a column).
Next, I placed the following code in the "...display this text before break columns" field:
<tr><td colspan="5" >
Then in the next field, I placed the following(without the quotes and spaces - I added them so that it would display here):
"& nbsp ; "
Finally, in the last field (labeled "...display this text after all break columns"), I closed out the row with:
</td></tr>
The only "issue" that I noticed is that at the end of the report, I have two empty rows. I'm guessing that they are because one is intended to display the break group total, and the other to display the report total. Oh well.
Hope this helps someone out.
Message was edited by:
MartyD

Similar Messages

Remove blank rows in Report painter

Good morning,
When running a report in GR55, I show ten blank rows on top of the report and I would like to get rid of them to save space. I have not found yet a way to do this in GRR2.

Hi,
Are you working with SAP B1?
Thanks.

Subtotal in Matrix reports at break groups - very urgent

Hello,
I have a matrix group with 2 break groups above.
So I have
Group 1
Group 2
G_Cross
G_Column
G_Row
The wizard gave me the subtotal for Group2. I cannot figure how I can get subtotal for Group 1 which is the top break group. Please Please help.
I also wanted to find out if there is a way to show the variable columns only once in the report and not every time the break groups kicks in?
Thanks a lot in advance.
-Rishi

The fact that you have a matrix further down the group hierarchy doesn't affect how you create summaries in the break groups. The wizard only gets you so far. For more advanced functionality you need to go into the data model & layout painter.
In this case, you need to create a summary column in the "Group 1" break group. Set the source as the appropriate column and the "Reset At" property to "Group 1". To add the summary to the layout; run the wizard (since the column is already there) or manually add a field to the corresponding "Group 1" repeating frame in the layout.
If you only want to see the break columns on the first page and not every page of the break group then set the following properties:
PrintObjectOn: FirstPage
BasePrintingOn: EnclosingObject
The object will then only print on the first page that the enclosing object prints on. ie: You wont get these objects repeated if the enclosing object extends onto another page.

How to do the ALV report output in groups and caluculate the tOTALS(URGENT

Hi
In my ALV report output .I have to group the output based on the DAYS field
0-10 days in one group
10-30 days in one group
above 30 days one group
There is also a field by name "AMOUNT" in my output.
I have to calculate SUBTOTALs at the end of every group and at the end of the report i should caluculate GRAND TOTAL.
Please remember that i should not use any any BLOCKED ALVs and for Totals i should not use the SYMBOLS provided in the application toolbar of the report
Thanks in Advance

Please don't repost your questions...
Check out my answer in your other post.
How to make the ALV report in groups and caluculate the TOTALS
Regards,
Naimesh Patel

How to Hide rows in Reports

Hi All,
I'm working on OBIEE 10.1.3.4 version on windows envorinment.
For one of my report am using Greand Total option. for example for grand total its shoeing 20 rows in these i need to hide some of the rows.
How can achieve this, could you pls help me.

Hi user,
do you have condition on which to select the rows to be hidden?
what do you exactly mean by hidden... do you mean they should be filtered? In that case you can apply a filter based on the condition.
Please elaborate your requirement..
Regards,
Kiran

Report page break not correct in browser

Hi all
I have 150+ reports that I am converting from 6i to 10g. These repors print correctly in 6i (client SErver) with page break at proper places. When I run the same report on web, the page breaks in the reports are converted to lines in the html output. Also the page headers appearin the middle of the page. Page break seems to be controlled by the browser and not by report. How do I make the report page break the same way as in 6i.
any help is appreciated. We are in the middle of testing and the users will not sign off until this is resolved.
Rgds
Arvind

SET
System parameter MODE = Default
On Report Level Property Sheet
Under Report Escapes
SET After Page Value =
<table style="page-break-before: always;height=0"></table>
Run reports as DESFORMAT=HTML
This will resolve the Page Break issue.
Unfortunately, printing reports from browser will generate a blank last page.
Perhaps the command line parm BLANKPAGES=NO will work for you...
I am told it does not work because printing is a browser issue not a reports issue...

Running awr report between start of load testing and end of load testing

Hi,
How i can get awr report between 2 intervals(snap before the load testing and snap after the load testing)
supoose load testing will happening for 1 hours and 30 minute and i need to get awr report how i can get this since i know interval between snapshots 60 minutes by default .
is it accomplished by manually inputs appreciated.
Thanks
Prakash

You change the interval to the increment you wish.
http://www.morganslibrary.org/reference/dbms_wrkld_repos.html
DBMS_WORKLOAD_REPOSITORY.MODIFY_SNAPSHOT_SETTINGS.

WAD input ready query with new blank rows

Hi all,
İ need to make an input ready query in wad with new blank rows under report.
in mu query i can see posted values where i need blank rows as well.
i have set number of new rows in analysis item.
what else i should do.
when i run my query, it gives warning that i have no columns that i can enter manually.
Any help?
thanks

Hi,
A few points that you should check:
1) Whether all characteristics of the Aggregation level are restricted to one single value except for characteristics included in the rows;
2) Whether all the characteristics included in the rows are displayed with the Key (with or without text);
3) If you have a Unit characteristic in the row, it still has to be restricted to a single value in the filter.
These are some of the typical reasons why I have encountered the same problem!
Regards
Sriram

How can print blank rows for XML output report..

Hi all,
I am working in XML output PO fix format report and in that report there is 3 sections. (1) Header section(2)Line section (3) Footer section. My requirement is like this, header and footer section print in all pages and line section break for next page after printing fix 15 lines in a page. And if any page has less then 15 lines then it generate remaining blank row to maintain footer position.
Please suggest me, how can i generate blank rows and break lines for page if there is more then 15 rows in Line section.
Thanks in Advance!

Hi,
<?for-each:ROW?>
<?end for-each?><xsl:variable name="cnt" select="count(//row|//ROW)" />
<?for-each:xdoxslt:foreach_number($_XDOCTX,1,15-count(ROW),1)?> <?end if?>
this will create 15 lines irrespective of you have that much rows of data in xml or not
if you want more help , drop me mail @ [email protected]

How to add a blank row in a report structure ?

Hi,
I have a report which uses a structure in both the rows and the columns. It also using cell definitions to define some cells in the report.
What I want to do is to format the report a bit more and insert a blank line at various points in the row structure.
Can this be done and if so how?

Are you creating report on InfoCUbe or ODS?
Are you aware of any characteristics for which value will never be ZERO in the Dataprovider?
If yes, then remove the formula and create the selection with description .(dot) and restrict that characteristics by #. That would pullout space for all the KFs.
- Danny

How to add blank rows between groups of duplicate rows?

here is my setup
create table #tmpA(rowID int identity(1,1), fName varchar(10), lName varchar(10))
insert into #tmpA
select 'a', 'b' union all
select 'a', 'b' union all
select 'c', 'd' union all
select 'c', 'd' union all
select 'e', 'f' union all
select 'e', 'f' union all
select 'g', 'h' union all
select 'g', 'h'
select distinct fName, lName
into #tmpB
From #tmpA
select t1.* from #tmpA t1 Join #tmpB t2 on t1.fName = t2.fName and t1.lName = t2.lName
--output
rowID fName lName
1             a        b
2             a        b
3            c         d
4             c         d
5             e        f
6            e        f
7             g        h
8             g        h
I want to add blank rows between rows 2 & 3 and between rows 4 & 5 and between rows 6 & 7 in the join query above. Is there Tsql that can accomplish something like this to make the join query result look like the following output?
rowID fName lName
1           a         b
2           a          b
3            c          d
4            c         d
5           e         f
6            e         f
7           g          h
8            g         h
or if this is not possible I could go with an output like this:
rowID fName lName
1             a         b
2             a         b
3
4             c         d
5             c         d
6
7             e         f
8             e        f
9
10           g         h
11           g         h
Rich P

I came up with the following on my own. I was just hoping there might be a fancier way to do this - like without looping -- and yes, I could/should do this in a presentation layer, but I just wanted to do this in Query Analyzer (or whatever they call
it now -- SSMS ...) -- BTW, thanks CELKO for the suggestion about how to insert multiple rows using Values -- works great.
If (object_id('tempdb..#tmpA') is not null) drop table #tmpA
If (object_id('tempdb..#tmpC') is not null) drop table #tmpC
create table #tmpA(rowID int identity(1,1), fName varchar(10), lName varchar(10))
insert into #tmpA
values
('a','b'),
('a','b'),
('c','d'),
('c','d'),
('e','f'),
('e','f'),
('g','h'),
('g','h')
create table #tmpC(rrowID int Identity(1,1), rowID int, fName varchar(10), lName varchar(10))
declare @i int, @s varchar(10), @t varchar(10), @u varchar(10), @v varchar(10)
select @i = min(rowID) from #tmpA
set @u = 'xx'
While (@u != 'yy')
Begin
   select @s = fName, @t = lName from #tmpA Where rowID = @i
   if exists(select 1 from #tmpA Where rowID = @i + 1)
      select @u = fname, @v = lName From #tmpA Where rowID = @i + 1
   else
      set @u = 'yy'
    if @s = @u And @t = @v
       begin
         Insert Into #tmpC(rowID, fName, lName) Select * from #tmpA Where rowID = @i
         Insert Into #tmpC(rowID, fName, lName) Select * from #tmpA Where rowID = @i + 1
       end
    else
       begin
          Insert Into #tmpC(rowID, fName, lName) Select null, '', ''
       end
    set @i = @i + 1
End
select * from #tmpC
--output from #tmpC
rrowID rowID fName lName
1           1         a       b
2            2         a     b
3        NULL
4            3         c        d
5            4        c        d
6          NULL
7             5        e      f
8            6         e        f
9           NULL
10          7          g       h
11          8          g        h
12         NULL
Rich P

How to Print Blank row in between the lsit of records/rows

Hi,
My Rtf output is 10 rows with 12 columns in each row, which comes form the SQL query of the RDF. Ii want to display a blank row after 9th row and before 10th row. So it would be 11 rows where 10th row should be blank. So how can i get this done through RTF syntax.
FYI, the o/p should look like below.
column 1 column 2 column3 ...
abc ac abc
abc ac abc
abc ac abc
abc ac abc
abc ac abc
abc ac abc
abc ac abc
abc ac abc
abc ac abc
abc ac abc
Any help is highly appreciated. Thanks much for your time and help.

Hi,
As far as I know, if we follow your steps: Page Layout settings > Page Setup > Print title> Sheet>Rows to Repeat at Top, we can set the row labels to every page, please see the below image:
We can see the row labels with page layout mode, but it does not display in Print Preview. Please try to save it as PDF or print it to see the row labels with every page.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to hide row column on condition in report

Hello everyone,
Can its is possible to hide a Column of a row in report.
For one customer i am having Opening Balance n Closing Balance data.....i m breaking my report on customer wise (First Column). So I can see Customer only one time not 5..... now i want to see Opening Balance Data only in first row n Closing Balance Data only in last row.
How can i achieve this, pls help!
regards,
UKJ

Hi,
I have no idea but try this:SELECT SEGMENT1,
        VENDOR_NAME,
        VENDOR_SITE_CODE,
        INVOICE_NUMBER,
        INVOICE_DATE,
        INVOICE_TYPE_LOOKUP_CODE,
        PAY_DATE,
        DESCRIPTION,
        CHECK_DATE,
        CHECK_NUMBER,
        VOUCHER_NUM,
        SUM(debit) debit,
        null credit,
        op_bal,
        cl_bal
from (
SELECT SEGMENT1,
        VENDOR_NAME,
        VENDOR_SITE_CODE,
        INVOICE_NUMBER,
        INVOICE_DATE,
        INVOICE_TYPE_LOOKUP_CODE,
        PAY_DATE,
        DESCRIPTION,
        CHECK_DATE,
        CHECK_NUMBER,
        VOUCHER_NUM,
        SUM(debit) debit,
        null credit,
        op_bal,
        cl_bal
        row_number () over (partition by VENDOR_NAME order by INVOICE_DATE) rnk
from (
SELECT SEGMENT1,
        VENDOR_NAME,
        VENDOR_SITE_CODE,
        INVOICE_NUMBER,
        INVOICE_DATE,
        INVOICE_TYPE_LOOKUP_CODE,
        PAY_DATE,
        DESCRIPTION,
        CHECK_DATE,
        CHECK_NUMBER,
        VOUCHER_NUM,
        SUM(debit) debit,
        null credit,
        op_bal,
        cl_bal
    FROM (
SELECT POV.SEGMENT1,
       POV.VENDOR_NAME,
       pov.vendor_id,
       POVS.VENDOR_SITE_CODE,
       hou.SET_OF_BOOKS_ID,
       API.INVOICE_NUM INVOICE_NUMBER,
       API.INVOICE_DATE,
       API.INVOICE_TYPE_LOOKUP_CODE,
       APPL.ACCOUNTING_DATE PAY_DATE,
       API.DESCRIPTION DESCRIPTION,
       TO_CHAR(APC.CHECK_DATE, 'dd-MON-yyyy') CHECK_DATE,
       APC.CHECK_NUMBER,
       APC.DOC_SEQUENCE_VALUE VOUCHER_NUM,
       API.INVOICE_AMOUNT,appl.amount,
       DECODE(API.INVOICE_TYPE_LOOKUP_CODE,'CREDIT',API.INVOICE_AMOUNT ,appl.amount) debit,
       null credit,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(API.INVOICE_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) cr_amt,
       jai_ap_rpt_apcr_pkg.compute_debit_balance(API.INVOICE_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) dr_amt,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(:P22_FROM_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) -
       jai_ap_rpt_apcr_pkg.compute_debit_balance(:P22_FROM_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) op_bal,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(:P22_TO_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) -
       jai_ap_rpt_apcr_pkg.compute_debit_balance(:P22_TO_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) cl_bal
    FROM AP_INVOICES_ALL API,
         AP_INVOICE_LINES_ALL APIL,
         AP_INVOICE_DISTRIBUTIONS_ALL APD,
         PO_VENDORS POV,
         PO_VENDOR_SITES_ALL POVS,
         AP_INVOICE_PAYMENTS_ALL APPL,
         AP_CHECKS_ALL APC,
         hr_operating_units hou
   WHERE API.INVOICE_ID = APIL.INVOICE_ID
     AND API.INVOICE_ID = APD.INVOICE_ID
     AND API.VENDOR_ID = POV.VENDOR_ID
     AND API.VENDOR_SITE_ID = POVS.VENDOR_SITE_ID
     AND API.INVOICE_ID = APPL.INVOICE_ID
     AND APPL.CHECK_ID = APC.CHECK_ID
     AND APIL.line_number = apd.invoice_line_number
     AND APD.match_status_flag='A'
     AND API.org_id=hou.ORGANIZATION_ID
     AND APIL.LINE_TYPE_LOOKUP_CODE='ITEM'
     AND api.org_id = nvl(:p22_org_id,api.org_id)
     AND TRUNC(API.INVOICE_DATE) BETWEEN NVL (:P22_FROM_DATE,API.INVOICE_DATE)AND NVL(:P22_TO_DATE,API.INVOICE_DATE)
GROUP BY SEGMENT1,
         VENDOR_NAME,
         VENDOR_SITE_CODE,
         INVOICE_NUMBER,
         INVOICE_DATE,
         INVOICE_TYPE_LOOKUP_CODE,
         PAY_DATE,
         DESCRIPTION,
         CHECK_DATE,
         CHECK_NUMBER,
         VOUCHER_NUM,
         op_bal,
         cl_bal
UNION
SELECT SEGMENT1,
       VENDOR_NAME,
       VENDOR_SITE_CODE,
       INVOICE_NUMBER,
       INVOICE_DATE,
       INVOICE_TYPE_LOOKUP_CODE,
       PAY_DATE,
       DESCRIPTION,
       CHECK_DATE,
       CHECK_NUMBER,
       VOUCHER_NUM,
       debit,
       SUM(credit) credit,
       op_bal,
       cl_bal
     FROM (
SELECT POV.SEGMENT1,
       POV.VENDOR_NAME,
       POVS.VENDOR_SITE_CODE,
       API.INVOICE_NUM INVOICE_NUMBER,
       API.INVOICE_DATE,
       API.INVOICE_TYPE_LOOKUP_CODE,
       NULL PAY_DATE,
       API.DESCRIPTION DESCRIPTION,
       NULL CHECK_DATE,
       NULL CHECK_NUMBER,
       NULL VOUCHER_NUM,
       DECODE(API.INVOICE_TYPE_LOOKUP_CODE,'CREDIT',NULL ,abs(API.INVOICE_AMOUNT)) credit,
       DECODE(API.INVOICE_TYPE_LOOKUP_CODE,'CREDIT',abs(API.INVOICE_AMOUNT)) DEBIT,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(API.INVOICE_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) -
       jai_ap_rpt_apcr_pkg.compute_debit_balance(API.INVOICE_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) op_bal,
       jai_ap_rpt_apcr_pkg.compute_credit_balance(:P22_TO_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) -
       jai_ap_rpt_apcr_pkg.compute_debit_balance(:P22_TO_DATE,pov.vendor_id,hou.SET_OF_BOOKS_ID,povs.VENDOR_SITE_CODE,:p22_org_id) cl_bal
   FROM AP_INVOICES_ALL API,
        AP_INVOICE_LINES_ALL APIL,
        AP_INVOICE_DISTRIBUTIONS_ALL APD,
        PO_VENDORS POV,
        PO_VENDOR_SITES_ALL POVS,
        hr_operating_units hou
   WHERE 1=1
    and api.org_id=apil.org_id
    and API.INVOICE_ID = APIL.INVOICE_ID
    AND API.INVOICE_ID = APD.INVOICE_ID
    AND API.VENDOR_ID = POV.VENDOR_ID
    AND API.VENDOR_SITE_ID = POVS.VENDOR_SITE_ID
    and api.org_id =apil.org_id
    and api.org_id=hou.ORGANIZATION_ID
    and apil.line_number = apd.invoice_line_number
    AND apd.match_status_flag='A'
    and apil.LINE_TYPE_LOOKUP_CODE='ITEM'
    AND api.org_id = nvl(:p22_org_id,api.org_id)
    AND TRUNC(APD.ACCOUNTING_DATE) BETWEEN NVL (:P22_FROM_DATE,APD.ACCOUNTING_DATE) AND NVL (:P22_TO_DATE,APD.ACCOUNTING_DATE)
GROUP BY SEGMENT1,
         VENDOR_NAME,
         VENDOR_SITE_CODE,
         INVOICE_NUMBER,
         INVOICE_DATE,
         INVOICE_TYPE_LOOKUP_CODE,
         PAY_DATE,
         DEBIT,
         CREDIT,
         DESCRIPTION,
         CHECK_DATE,
         CHECK_NUMBER,
         VOUCHER_NUM,
         op_bal,
         cl_bal)
where rnk = 1If it doesn't work as required then alter the line row_number () over (partition by VENDOR_NAME order by INVOICE_DATE) rnk
I've just guessed that you can find a unique record (a persons account) by partitioning by the vendor_name at that point but perhaps you need other things.
Mike

Intermittent Blank Rows coming in BI Publisher Report output

Hi,
We are working on a BI Publisher report output.
Issue
The report sometimes creates a blank row along with the headings of the report columns. Table has multiple records and between 2 records we have a data being displayed which is optional. When this record is null, it is creating an extra space and hence creating a new page with the headers and a blank row.
Reducing the space is one issue we have thought of. Are there any other pointers to this.
Thanks
Ishani

Hi,
I did not got the complete thing but as you told you need to remove the blank space in the report and at the same you told when a column returns null the row get displayed as blank row.
Then can you try using the Conditional region so that when ever you find the column value as null so you can hide that row.
Just try it i donot no if your requirement is exactly like this or what.
Thanks.

Omit the final SUM row in a report using breaks

We have a report using breaking whereby it is broken for current day, week to date and month to date. We want to use the column SUM feature so that we have a count of all records for the day, week to date and month to date.
This works fine, however we also get a final sum row on the bottom of the report which is a sum of the month, week and day count. This is meaningless as the month includes the week which in turn includes the day - all it gives is a useless large number! :)
Is there a way to stop this final column being displayed?
Thanks in advance

I have managed to remove the last row in a table using the following code:
<script type="text/javascript">
$(document).ready(function() {
$("#JK_TEST .t7standard tr:last").remove();
</script>However, the report uses a bottom border implemented using a <TR> so I actually need to remove the second to last row. I have tried to work out how to do this but am still trying!!! Any suggestions?
EDIT::
DONE IT!!! :D:D :D
Cheers for the help!
<script type="text/javascript">
$(document).ready(function() {
$("#JK_TEST .t7standard tr:last").prev($('<TR>')).remove();
</script>Cheers!
Edited by: /dev/null on Mar 24, 2009 4:49 PM

How to: Blank row on report between break group

Similar Messages

Maybe you are looking for