How to block amount field and layout field  in transaction MIR7

Hi Expert,
Please tell me how to block amount field and layout field  in transaction MIR7 for a particular user .
i am trying to block through SHD0 tcode but it is not blocked.please give me the right ans
Thanks In Advance

Hi Rajuka,
I wasn't refering to SHD0 transaction variants. User exists and Customer exists are a very interesting enhancements in ABAP which helps to add custom logic to SAP delievered programs/function modules without actually modifying the original program.
Just to add a little more details to the concept of Custom Exits (Customized user exits), please refer the links below:
[http://wiki.sdn.sap.com/wiki/display/ABAP/CustomerExits(CMOD)]
[http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=189893877]
[http://wiki.sdn.sap.com/wiki/display/ERPFI/Creatinguserexitsforsubstitutions]
You will find a lot of information about custom exists and its types over the web. Also, your developer might provide you a better insight into this concept and its relevancy to your requirement.
Cheers!
Sandipan
Edited by: Sandipan Choudhury on Dec 10, 2010 8:02 AM

Similar Messages

  • "Amount, currency, and date fields and service provider reset"

    Hi all,
    I am trying to save a trip request via TCode: TRIP but receive the following message:
    "Amount, currency, and date fields and service provider reset"   Messsage no. PTRA_WEB_INTERFACE150
    The system is on ECC6.0 with IS-PS (i.e. Funds management activated).
    Anyone encountered this previously - hope you can share your solution.
    Thanks in advance.

    Hi
    I am also facing the same and checked the table mention below and dates are same but still facing the error "Amount, currency, and date fields and service provider reset" along with other error message i.e "Expense type not allowed (T70S_RECEIPT)" .
    Please guide .
    V_T706B1
    V_T706B1_A
    V_T706B1_B
    V_T706B4
    V_T706B4_A

  • How to compare table data and table field

    Hi buddy,
        I have some question about how to compare table data and table field.
       1. I know there is one method:   CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS  , it use in unit test to compare the table data(A and B) , you can loop table A into structure A1, then use this mehtod it can compare whether table B contain structure A1.  but when I try to use this in main program it will dump.
              CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS(
                                                                                                        LINE    = A1
                                                                                                        TABLE = B ).
           Is there any method or FM can be used to compare the table data ?
        2. I also want to compare two table field , try to find out the different. How to realize this.
    Thank you for your sincerely answer.

    Hi Zongjie,
    What`s the difference, if you using loop A into wa_A, read table B into wa_B with all field, then compare with wa_A and wa_B.
    The question 2, seems no standard FM available here.
    Loop A into wa_A.
       Loop B into wa_B.
           if wa_A-field1 eq wa_B-field1.
           endif.
            if wa_A-field2 eq wa_B-field2. 
           endif.
       endloop.
    endloop.
    regards,
    Archer

  • Prerequsites for deciding Key fields and data fields

    Hi
    I would like to know the criteria to decide upon KEY fields and Data fields for an infoprovider.

    Hi,
    What is a Key field in a Database and How should I choose one?
    Keys are crucial to a table structure for many reasons, some of which are identified below:
    They ensure that each record in a table is precisely identified.
    They help establish and enforce various types of integrity.
    They serve to establish table relationships.
    Datafields may be Charecteristics and it may be keyfigures
    Regards,
    Marasa.

  • Chart report Condition fields and Data fields

    Hi all,
    i have tried chart report by adding two condion fields and one data field, the report is more meaning full in this scenario. the first condition field is taken as x-axis, the 2nd condition fields is taken as legend.
    while adding more condition fields and data fields, i feel its not showing meaningfull data.
    can anyone explain how the condition fields and data fileds are manipulated by crystal report.
    i am using CR XI R2 Server.
    Thanks
    Padmanaban V

    i am using Crystal Report XI R2 RAS Embedded in my server.
    as we can add any number condition fields programatically using the method
    ConditionField.Add(FieldObj), i would like to know how these fields are manipulated internally by the RAS server.
    that means, what is the significance of condition fieldobject 1, condition fieldobject 2,condition fieldobject 3 etc...
    if i add more than two condition fields , RAS Chart Report always returns 0 as legend value for all legends.
    Thanks in advance
    Regards,
    Padmanaban V
    Edited by: Padmanaban Viswanathan on Dec 22, 2008 9:53 AM

  • Identify key fields and data fields

    Hi
    i have datasource 0co_om_cca_9 .
    i want build 1 DSO, how can i identify what are key fields and data fields to build DSO based on that datasource.

    Hi sunnel,
    The DSO are like 2-D database tables.
    We use the technical keys here in counterpart to the business keys in Infocubes.
    The key fields are the one based on which the records are identified uniquely in the database table.
    And the data fields are the ones which are aggrgated or summarised or overwritten based on the value in key filed.
    For example:
    The ID no.s of the employees will be unique and it can be used as a key field.
    The feilds like the Salary taken by the employee every month :"SALARY"
    and the no. of leaves they taken: " NO. OF LEAVES" can be used as data fields.
    So that the salary or the leaves taken by a particular employee can be aggregated based on her/his ID no.
    The key fields in DSO doesnty mean Key figures.The key field means any unique key or a key based on which the records are sorted in the DSO
    And key figures are the data fields.Some of the Characteristics can also be data fields in DSO.
    Please give points if u r satisfied wit the information
    Also let me know if u hav any doubt and if any thing is wrong.
    Regards,
    Kalpana M

  • Defining Key -field and data fields

    Hi all
    i have to define Key-Fields and data-Fields for a DSO(say DSO3).
    DSO1 is a combination of DSO2 and DSO3..
    DSO1 and DSO2 are SAP defined DSOs.
    DSO3 is a User defined DSO.
    my assumption:
       DSO3 has 30 fields
       DSO2 has 16 fields.
       can i create the DSO3 with remaining 14 fields which is there in DSO1?
       or i have to create the DSO3 with 30 fields(all DSO1 fields).
    can any body explain....
    Thanks & Regards
    krishna

    The problem is not how many fields you create where, the issue is where is the data is going to come from.
    Since you data is going from DSO3 to DSO1and if the field is already getting populated in DSO1 from DSO2, then you don't have to worry about populating those fields again, unless and otherwise you want to overwrite them.
    Remember any fields exist in both DSO3 and DSO2 which overlapping will be overwritten by the latest update.
    Again, going back to your question, you should consider does your datasource has missing fields (14 of them).
    thanks.
    Wond

  • User Defined Fields and Reference Fields on the B/S

    Dear Experts,
       On the balance sheet in SAP 9.0/8.82 once you click on the expanded button, there are user defined fields and reference fields which are blank. Could someone assist on how to use them ?
    Kind Regards

    Hi Martin,
    If you add any user defined fields (UDF) in Journal Entry (JE) screen, You can use the udf's in the
    balance sheet report.
    Regards
    Neslin

  • Attaching search help to SCREEN FIELDS AND TABLE FIELDS

    Hello experts,
    Himanshu here.
    Could you please explain how we can assign search Help to a screen field AND TABLE FIELDS in ABAP?
    Please reply at the earliest,as we have some deliverables to be met
    Thanks

    Hi,
    In the initial screen of the ABAP Dictionary, select object class Search help, enter the name of the search help and choose Create.
    A dialog box appears in which you must select the type of search help.
    Select Collective search help and choose .
    The maintenance screen for collective search helps is displayed.
    Enter an explanatory text in the field Short text.
    You can for example find the search help at a later time using this short text.
    In the Definition tab page enter the parameters of the collective search help.
    Select the Imp flag if it is an import parameter. Select the Exp flag if it is an export parameter.
    Define the types for the parameters of a collective search help by assigning a data element. Enter the name of the data element that describes the contents of the search help parameter in the Data element field.
    You can assign the parameter a default value in the Default value field.
    In exceptions it could be necessary to change the standard process defined by the search help. You can implement the deviation from the standard using a search help exit.
    In this case enter the name of the search help exit in the corresponding field.
    On the Included search helps tab page, define the search helps that you want to include in the collective search help.
    You can include elementary search helps and collective search helps.
    Use the Hide flag to control whether an included search help should appear in the dialog box for selecting the elementary search help. If the flag is set, the search help is not offered.
    It makes sense to hide search help inclusions if one or more search paths in the standard system should not be used in a concrete R/3 System. Similarly, search help inclusions can also be already hidden in the standard system because they only can be used meaningfully in a few R/3 Systems. You have to cancel the flag in this case.
    Position the cursor one after the other on each allocated search help and choose Parameter assignment.
    In the next screen, enter the parameter names of the elementary search helps to which the corresponding parameters of the collective search help should be assigned in the field Reference parameter.
    You can select the parameters contained in the included search help using the input help. Create a proposal for the assignment with Proposal.
    Save your entries.
    A dialog box appears in which you have to assign a development class to the search help.
    Choose .
    Result
    The collective search help is activated. You can find information about the activation flow in the activation log, which you can display with Utilities ® Activation log. If errors occurred when the collective search help was activated, the activation log is automatically displayed.
    Do not forget to link the search help to a screen field. The search help attachment is not part of the search help definition; it is part of the object definition to which the search help is attached.
    regards,
    veeresh.

  • SAP MDM DISPLAY FIELD AND UNIQUE FIELD DIFFERENCE

    Hi All
    I am new in MDM, can any body please help me understand...
    What is the difference between display field and unique field?
    Besides to consider one field to be a key in a lookup table, how should we declare that field in the table, as a display field or as an unique field?
    It would be helpful if someone kindly explain this to me.
    Thanks in advance.
    Santanu Ghosh

    Hi Santanu,
    To explain you the difference in Display field and Unique filed as in MDM in a prescise manner:
    Display field:
    Every field you create under your main table ie Product atbel will be a displayed field in MDM data manger irrespective of you making it as display or not in Console.
    It means two things
    1) That this field will be visible in MDM data manger.
    2) This field will be visible in Import Manager for Mapping.
    But in case of lookup field you need to make the fields as dispaly or not,if you wish to see them in import manger.
    If you do not make the fields in a lookup table as dsipaly then even though you can see them in MDM data manger you will not be able to see them in Import amnger as a result not be able to map them.
    Unique Field:
    When you make any field as unique it maens taht MDM will not allow you to add two values under this field with the same value.
    Eg:You acnnot add two materials with material no 100.
    Hope it helped
    Kindly reward points if found useful
    Thanks
    Simona

  • DSO - What key fields and data fields in dso

    Hi experts,
    I need to create a dso in between the cube and 2 data sources(2lis_11_vaitm, 2lis_12_vcscl) to stage the data. My question is: what key fields and data fields to choose for the dso? is there a standard dso to copy? please explain in detail the model to set up, whether to connect both the ds's to dso and then to cube or one ds to dso and the other to the cube. more details will help.

    Check this for standard DSO:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/fcdc387f34384f94c3227baf3837a8/content.htm
    Thanks...
    Shambhu

  • Key fields and data fields in a DSO  ??

    i have a question regarding key fields and data fields in a Standard DSO...
    i am using 2 datasources to build a open sales report 2LIS_11_VASTH  and  2LIS_11_VASTI   i am pulling in data from these 2 data sources to a DSO and i am wondering what infoobjects should be in the key fields and data fields .....does this reflect back to table VBUK and VBUP tables and does the key field in the DSO have to be the key fields in VBUK and VBUP tables  ????  or what really should be included as key fields and data fields   ????  
    please help....

    If you look at the various SD tables, VBELN and POSNR are commonly used as the document number and document line item.
    For VBAP and VBUP, it's referring to the Sales Order Line Item with the columns VBELN and POSNR as the key for both tables. However, if you look at the LIPS table, which is the Delivery Line Item table, it too has VBELN and POSNR as the key. Likewise, the VTTP table, which is the Shipment Line Item table, also has VBELN and POSNR as the key.
    While using RSOSFIELDMAP as a map is a fairly good "rule of thumb", it still needs to be used with a level of skepticism.

  • Data fields and key fields

    Hi,
    Data fields and key fields are same as Characteristcs and key figures? Or they are diffrerent?
    Thanks,
    Radha

    HI
    Key Fields =  Acts as Primary Key for The ODS like Primary of Tables in R3.
    Data fields =  Apart from Key fields We consider rest as data fields.
    Ususally we use Characteristic info Objects and Dates in Key Fields and Key figures in Data fields.
    It's decisive factor for overwriting property of ODS or DOS.
    Hope this helps.
    Regards,
    Rangzz
    Edited by: Ranganath Kodiugane on Feb 7, 2009 12:14 PM

  • Arbic fields and english fields are mixed in exported data from oracle

    I have a oracle db with character set UTF8.
    I have exported some data from a table with arabic detail through sqlplus
    and saved in a text file.The file is | sepereted.
    I can view this file properly while using textpad.
    But in note pad the arbic fields and english fields are mixed.
    I have anothe application which is accept the data from note pad only.
    so i am not able to export arabic data properly in notepad.
    Can any one help from this issue.?
    Thanks,
    nash

    Thanks for your reply.
    i have saved the file in UTF8 format and still the same.
    i will explian you the real issue.
    We have one Dot net application and we need to upload some data to this application.
    I can upload the data which is contain only English detail.
    But i am not able to upload the arbic detail.So i ve checked the application and the data which i am uploading to this.
    And i found that the data which i am uploading is mixed with arabic fields and english fields.
    There is a field seperation in my data which is '|',So i can see some arabic field is mixed with some other english field
    if i open the file through internet Exploreer or notepad able to see the mixed field detail.
    But i can see the data in textpad are correctly.
    The upload data file is taking from oracle database through toad.
    I have tried with SQL plus also.But still the same.
    Please help me out from this issue?

  • The types of the parameter field and parameter field current values are not compatible.----

    HI,
    I am attempting to set report parameters in my .jsp code via URL parameters.
    I am able to set the report name, server connection dynamically however when attempting to set the Parameters I receive:
    com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException: The types of the parameter field and parameter field current values are not compatible.---- Error code:-2147213303 Error code name:invalidParameterField
    The parameter on the report is a String Type, named for this example p1.
    The value that p1 represents is LERAD
    My code:
    String stringValue = request.getParameter("p1");
    CRJavaHelper.addDiscreteParameterValue( clientDoc, "","p1", stringvalue);
    returns the above mentioned error.
    I have tried:
    String stringValue = (String)request.getParameter("p1");
    which returns the above error
    And;
    String stringValue = new String(request.getParameter("p1")).toString();
    which returns
    java.lang.NullPointerException
    java.lang.String.<init>(Unknown Source)
    org.apache.jsp.callReport_jsp._jspService(callReport_jsp.java:105)
    org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
    org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
    I notice that the CRjavaHelper.java declares this addDiscreteParameterValue as accepting an Object type for the newValue.
    Any ideas???

    Hi,
    nevermind.
    case sensitivty strikes again.
    my URL param was P1 ( case sensitive)

Maybe you are looking for