How to block mac address in 2800 router

sir
how to block mac addresses in cisco 2800 router

Hi,
To block mac addresses you can simply create Mac based ACLs which ranges between
700 to 799
Example:
access-list 700 deny xxxx.xxxx.xxxx.xxxx
access-list 700 permit yyyy.yyyy.yyyy.yyyy
now you can apply it on interface:
int f0/0
access-group 700 in
exit
Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services

Similar Messages

How to change mac address on wrt54g router

How to change mac address on wrt54g router?

are u sure u wanna change the MAC of the WRT54G ? it's not possible....you can however clone the MAC address of your PC onto the router...depending on your ISP.

Blocking MAC-Address on Cisco Router

Can anyone tell me how to block a particular mac-address on cisco router 2900 series? There are few pc's in the network which i dont want to get them into the network anyhow. Can anyone help me out with this?
Regards,
Abhishek

With your problem-description
There are few pc's in the network which i dont want to get them into the network anyhow
the strategy of using the router to block them is the wrong way because the PCs are already on the network and the blocking has to be done at the entry-points which are the switches.
But if you want to stop them leaving your network on the router by filtering the MAC, you could also use modified QoS-mechanisms:
class-map match-any UNWANTED-PCs
match source-address mac AAAA.BBBB.CCCC
match source-address mac DDDD.EEEE.FFFF
policy-map IN-POLICY
class UNWANTED-PCs
drop
int GigabitEthernet0/0
description LAN-Interface
service-policy input IN-POLICY
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

How to connect to a network that has blocked Mac addresses?

My school has blocked Mac addresses how do I get around this?

lllaass already answered, and JakeStebbings provided as helpful a suggestion as possible.
You might as well mark your own response as "answered" and move on:
That's impossible.

What good is it to have a router that doesn't block mac addresses like its supposed too!!!

what good is it to have a router that doesn't block mac addresses like its supposed too!!!

At 10:30pm I think I'd like to talk this out....Lemme give you some more details and lets get some hardware programmers involved. I think this is a cross-platform conflict or at the remote a outdated hardware problem. What do you need from me to track this issue down? I have been patient and have waited over 1yr or maybe 2, waiting for an update to correct this issue. Alas, there has been no solution to this problem. I have 13 seperate MAC addy's on the network. 1 wired and the the rest wireless(some constant, others random). All on a schedule(some timed access, some all the time). I have macBooks, Labtops, Desktops, Ipads, Ipods, DSIs, Windows7, WindowsXP Pro, PS3, AppleTV and a few random BlueTooths. Not that much.
Anyways, I think somehow there is a hole because of cross-platfom compatability that is making my daughter able to get on the net unless I change the wireless password......
No I have no proof...It's just a feeling

RV016: PPTP Server and "Block MAC address"

So if the PPTP server is enabled, and "Block MAC address not on the list" is enabled under the DHCP settings, will the PPTP client get an IP address?
Similarly, if the PPTP server is enabled and the range of IP addresses configured on the PPTP server screen is outside the IP range of the router due to a subnet mask (like 255.255.225.248 for example), will the IP still be assigned to the PPTP client? If assigned, will that IP have any connectivity to the LAN?
Thank you in advance for any answers!
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

So here's how PPTP works with these two features:
1. The PPTP IP range is a different range than the DHCP range. You get an error message if your PPTP IP range overlaps with the DHCP one.
I didn't test the 'Block MAC' function because since the IP isn't coming from the DHCP pool, I highly doubt any MAC blocking will work.
2. Since your PPTP IP address range is outside of the DHCP range, this point is completely taken off the table. However, if you choose an IP range that's outside of the subnet, you'll get an error message when saving. I also learned that if you set the PPTP IP to just a single number and connect, the router will automatically reject any additional connections since no IPs are available.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

How to find mac address of a client computer in specified time and port in WIFI WCS Control system

how to find mac address of a client computer in specified time and port in WIFI WCS Control system

WCS record-keeping is very crude.
You'll get the time/date when the client authenticated. You'll get the local inside address but you'll need the router to translate the outside IP address and the port.
You will need a proxy server to determine what sites did a wireless client goes.

How to change mac address on time capsule

Hi there,
How to change mac address on time capsule?

There are routers that allow you to create/clone a mac address to whatever you like. Since many companies use the mac address to 'register' a unit connected to it's system, you usually just have to let them know you've changed your router and they will reset your system to accept connections from the new device.

How to remove MAC-address filtering? Where? Officejet 4632+HP15 notebook + Huawei 4G

I can't connect wirelessly my new Officejet 4632 printer to my HP15-g041sa (win 8.1) notebook.
Printer can not connect to Wi-Fi router (Huawei E3276 4G Sonera modem in use).
How can I get MAC address filtering off from my system (which can cause this problem)?
Where to go to find the place to get off MAC address filtering?
I got some advice: "Remove the MAC address from the router's access list."
But where is this place to remove... In my laptop, somewhere?
Help would be greatly appreciated.

Hello there! Welcome to the forums @Ysi9
To change your Mac address filtering, you would need to access your router settings. If you're unsure about how to do this, I would personally suggest contacting your routers manufacturer for assistance.
I hope that helps you!
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

How to set mac mini to virtual router

how to set mac mini to virtual router.

Hi James,
It's Internet Sharing you're looking for in System Preferences>Sharing, which can share your connection, say from Ethernet to other computers/devices using Airport/Wifi.

How to see mac address in IPS 4240 ???

Hi all,
How to see mac-address of inline-vlan-pair ? and how to see mac-address of management interface in IPS ?
Regards,
Kiran

Hello Kiran,
The inline-vlan-pair itself is tied to a particular interface. So you're really asking for the MAC address of the interface associated with the inline-vlan-pair.
The MAC address of sensing ports will be added to a "show interfaces" via CSCse84414. You can currently view the MAC address of sensing interfaces by doing an "ifconfig -a" from the service account.
Thank you,
Blayne Dreier
Cisco TAC IDS Team
**Please check out our Podcast**
TAC Security Show: http://www.cisco.com/go/tacsecuritypodcast

How to get MAC address from IP address in LAN

Hi all,
How to get MAC address from IP address in LAN (windows or any OS), I would have all IP addresses of my LAN, so I would like to know all MAC address.
Code examples are highly appreciated.
Thanks & Regards,
abel...

abel wrote:
Yeah that is only working for local system, but how to get remote system's MAC ..?
Thanks for quick reply ...
Edited by: abel on Jan 28, 2009 12:10 AMIt is my understanding that only one person ever found the holy grail which you seek. But sadly [_he's dead_|http://forums.sun.com/profile.jspa?userID=649366]
As a curious aside how did you manage to get the list of IPs?

How to change mac address on mac

i'm sry i'm not sure if this is the right section or not but yeah.... nyways does anyone know how to change mac address on a macbook?

If you have not updated your OS you can use the following command.
sudo ifconfig enX ether xx:xx:xx:xx:xx:xx
You will need to replace the X with your network number and the xx:xx:xx:xx:xx:xx with the mac you want to have.
Then run
sudo ifconfig enX down
sudo ifconfig enX up
This change will last till your next reboot.
cheers
NOTE: This is not working in 10.5

How to check MAC address from host from local network

Hello,
I must save information about my network enviroment, at some periods of time (IP, Host Name, MAC Address, and later some information from SNMP). I have IP addresses of all devices. Could any one have an idea how to check MAC address. In java.net.* I didn't find anythink about my problem.
Please give my an answer, if you konow any solution.
Marcin Kowalski

hi !
I've typed ipconfig on my PC which has windows2000 pro. as the OS!!
but i couldn't get th line you've mentioned "Physical Address" !!
what could be wrong .. ?!! hope you could help!!
thanks!!
C:\>ipconfig
Windows 2000 IP Configuration
Ethernet adapter
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.130.128.210
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.130.128.1

HT1695 how to add mac address to wi fi router

I am unable to access internet through wi fi although the Wi Fi icon comes on the screen.

What make, model, and version WiFi router do you have?
Do you have any user documentation for your router?
Do you actually have MAC address filtering turned on?
Despite the WiFi icon you may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.

How to block mac address in 2800 router

Similar Messages

Maybe you are looking for