How to check MAC address from host from local network
Hello,
I must save information about my network enviroment, at some periods of time (IP, Host Name, MAC Address, and later some information from SNMP). I have IP addresses of all devices. Could any one have an idea how to check MAC address. In java.net.* I didn't find anythink about my problem.
Please give my an answer, if you konow any solution.
Marcin Kowalski
hi !
I've typed ipconfig on my PC which has windows2000 pro. as the OS!!
but i couldn't get th line you've mentioned "Physical Address" !!
what could be wrong .. ?!! hope you could help!!
thanks!!
C:\>ipconfig
Windows 2000 IP Configuration
Ethernet adapter
Connection-specific DNS Suffix . :
IP Address. . . . . . . . . . . . : 10.130.128.210
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.130.128.1
Similar Messages
-
How can check ip of network printer? how can check MAC address?
hello,
my printer name is,
HP Laserjet 1022n
product no. Q5913A
serial no. VNRT79T074
give me a details of the issue
mittal sagarHi,
You may locate both the Mac Address and the IP Address by prinitng a Configuration Page.
You may fnd the steps to print the report listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01125585
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
How to change MAC address on VPN Adapter - Deterministic Network Enhancer
Is it possible to change the MAC address 00-05-9A-3C-78-00 on the Cisco VPN Client / Cisco Systems VPN Adapter - Deterministic Enhancer Miniport. (Version 4.6.02.0011)
ThanksI've tried using mac address changeing softeware on it before and it always changed it back when I enable my VPN.
HTH
Patrick -
Obtaining MAC addresses of machines on local network
Hello, I have written a small network management program in Java (used to remotely turn our machines on and off)
Off via starting an external program (beyondexecv2), and on via creaing the Wake On Lan magic packet.
Currently it looks up the MAC addresses in a textfile of mahinenames->mac address.
I'd like to be able to scan the network and automatically pick up the MAC addresses of any machine that is currently on.
I have seen other network scan programs that do this, is it possible in Java?
Yours
PPageThanks Omkara,
Thats nearly the way I've decided to do it (after finding similar on another thread)
Basically need to itterate through my list of machine names (or get them from a standard scan of the IP range), and for each run the ping command on the ip/machinename, then immidiatly run the arp -a command and parse its output looking for the IP address of the machine, and that will give its corrosponding MAC address.
Problem sorted.
Cheers for the help though. -
How to get MAC address from IP address in LAN
Hi all,
How to get MAC address from IP address in LAN (windows or any OS), I would have all IP addresses of my LAN, so I would like to know all MAC address.
Code examples are highly appreciated.
Thanks & Regards,
abel...abel wrote:
Yeah that is only working for local system, but how to get remote system's MAC ..?
Thanks for quick reply ...
Edited by: abel on Jan 28, 2009 12:10 AMIt is my understanding that only one person ever found the holy grail which you seek. But sadly [_he's dead_|http://forums.sun.com/profile.jspa?userID=649366]
As a curious aside how did you manage to get the list of IPs? -
How to see mac address in IPS 4240 ???
Hi all,
How to see mac-address of inline-vlan-pair ? and how to see mac-address of management interface in IPS ?
Regards,
KiranHello Kiran,
The inline-vlan-pair itself is tied to a particular interface. So you're really asking for the MAC address of the interface associated with the inline-vlan-pair.
The MAC address of sensing ports will be added to a "show interfaces" via CSCse84414. You can currently view the MAC address of sensing interfaces by doing an "ifconfig -a" from the service account.
Thank you,
Blayne Dreier
Cisco TAC IDS Team
**Please check out our Podcast**
TAC Security Show: http://www.cisco.com/go/tacsecuritypodcast -
How to change mac address on time capsule
Hi there,
How to change mac address on time capsule?There are routers that allow you to create/clone a mac address to whatever you like. Since many companies use the mac address to 'register' a unit connected to it's system, you usually just have to let them know you've changed your router and they will reset your system to accept connections from the new device.
-
I can't connect wirelessly my new Officejet 4632 printer to my HP15-g041sa (win 8.1) notebook.
Printer can not connect to Wi-Fi router (Huawei E3276 4G Sonera modem in use).
How can I get MAC address filtering off from my system (which can cause this problem)?
Where to go to find the place to get off MAC address filtering?
I got some advice: "Remove the MAC address from the router's access list."
But where is this place to remove... In my laptop, somewhere?
Help would be greatly appreciated.Hello there! Welcome to the forums @Ysi9
To change your Mac address filtering, you would need to access your router settings. If you're unsure about how to do this, I would personally suggest contacting your routers manufacturer for assistance.
I hope that helps you!
Happy Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
How to block mac address in 2800 router
sir
how to block mac addresses in cisco 2800 routerHi,
To block mac addresses you can simply create Mac based ACLs which ranges between
700 to 799
Example:
access-list 700 deny xxxx.xxxx.xxxx.xxxx
access-list 700 permit yyyy.yyyy.yyyy.yyyy
now you can apply it on interface:
int f0/0
access-group 700 in
exit
Regards,
Rahul Chhabra
Network Engineer
Spooster IT Services -
How to find mac address of a client computer in specified time and port in WIFI WCS Control system
how to find mac address of a client computer in specified time and port in WIFI WCS Control system
WCS record-keeping is very crude.
You'll get the time/date when the client authenticated. You'll get the local inside address but you'll need the router to translate the outside IP address and the port.
You will need a proxy server to determine what sites did a wireless client goes. -
How to change mac address on mac
i'm sry i'm not sure if this is the right section or not but yeah.... nyways does anyone know how to change mac address on a macbook?
If you have not updated your OS you can use the following command.
sudo ifconfig enX ether xx:xx:xx:xx:xx:xx
You will need to replace the X with your network number and the xx:xx:xx:xx:xx:xx with the mac you want to have.
Then run
sudo ifconfig enX down
sudo ifconfig enX up
This change will last till your next reboot.
cheers
NOTE: This is not working in 10.5 -
How to change mac address on wrt54g router
How to change mac address on wrt54g router?
are u sure u wanna change the MAC of the WRT54G ? it's not possible....you can however clone the MAC address of your PC onto the router...depending on your ISP.
-
is it possible to access my TimeCapsule from outside my local network via internet? If so what is the best app that can help me?
iCloud can do it..
http://www.apple.com/au/support/icloud/back-to-my-mac/
You need Lion and latest firmware on the TC..
Were you hoping to use the ipad/iphone?? That maybe possible but I am not sure how.
You cannot use windows without opening SMB to some strange port and this is going to mess with security.. you also need a static ip address from your ISP.. most private net users do not have this.
You can do it via vpn.. you will need to buy a vpn router and bridge the TC to it.
Just google remote access time capsule.. there are a zillion posts about it. -
How can I see the PC on my local network
How can I see the PC on my local network. With Leopard installed I see the others Mac on the network but ot the PC. But the PC see me. What happen and How I can resolve that.
Have you tried connecting to the PC via the Finder's "Connect to Server…" and used the IP address?
It would be smb://server.ip.address/sharename
Do you have the workgroup set up in the network preferences for the service that you are connected to your LAN with.
There is also a problem on Leopard where the workgroup doesn't stay set, so if that is the case, you need to duplicate the service (ethernet, airport, etc) and use the duplicate. You can then remove the original. -
i want to buy an ipad 2 3G but i am not a US resident, how can i get to work on a local network NOT verizon or AT&T
From your screen name would it be safe to guess that you will be using it in Egypt? If your carrier uses is a GSM network you can do as Chris suggests.
From the Apple page http://www.apple.com/eg/buy/ there is a link to Arab Buisness Machine, they sell the iPad 2 and offer local support should any problems arise.
Maybe you are looking for
-
Yesterday, I updated my computer. I have a excel document that I use everyday for work and saved the document prior to doing such. After updating, I had to restart the computer. Now when I open that excel document, it brings me back to a copy of t
-
Node functions in Message Mapping
Hi, Could someone help me with some good exercises for node functions such as splitbyvalue, collapsecontents, removecontexts. I am a newbie to these functions and have absolutely no idea on how to use them. Would appreciate if someone could give very
-
i just downloaded safari for windows xp. i went to log in to my college email account and when i enter the information and click log in, safari just brings up a blank new log in form and wont let me access my email. any ideas?
-
How to fix iPad that has a green screen and lags when you try watching videos
How do you fix your iPad when it has a green screen and it lags when you try to watch videos, such as from YouTube? I tried to watch YouTube on Safari but it does not work, and the app version of YouTube does not work either. When the video is playin
-
Hi All, I want subtotals text in ALV GRID. For this iam seeing a standard program 'BCALV_TEST_FULLSCREEN'.Iam giving subtotal text on selection screen,but its not displayed in output.How to view the text. When i executed another program BCALV_TE