How to boot an External SSD from a cd/usb?

Does anyone know how I can boot an external SSD from a cd/usb? i need to update the firmware on the SSD via a cd/usb before i put it in my mac as the update is listed as a destructive update (meaning it will require re installing a back up). But i am unsure how to do this or if it is even possible on a mac? It would save me the hassle of putting the SSD in my mac updating and removing again if it is critical.
Any help would be greatly appreciated, many thanks.

You cannot boot from the CD unless it has the OS on it.  For reasons unrelated to this post I just created a bootable external HDD and installed some software on it from a CD.  I think you have to do the same procedure with your firmware.
Attach the external SSD to your MBP.
Power the MBP holding the OPTION key.
Select the external SSD.
When the system is ready, insert the CD.
Do your firmware update.
Shut down the MBP and swap the drives.
This is based on the premise that the external HDD has an OS on it.
As far as the 'destructive update' aspect is concerned, I leave that to Clinton to pursue.  I'm still 'old fashioned' and use only HDDs.  Clinton has the SSD knowledge base.
Trust me, both Clinton and I are here to help you as much as we possibly can.  When I said,
"Am I missing something here?", it was not a challenge but a need for more information and/or clarification.  This medium has its limits in communications.
Ciao.

Similar Messages

  • How to boot a Lenovo G580 from disk

    Okay! Apologies if I've missed this exact same post somewhere, I Googled for literally days and couldn't find a sausage about how to boot my Lenovo G580 from disk but I've finally, by accident, found the answer!
    So, when you go to the boot menu, it'll look something like this:
    (Note: this image is taken from Google, I had no way of taking a picture of my own)
    Now, if you're like me, you would think that in order to boot the laptop from a disk, you'd need to re-order so that the highlighted line was at the top! Makes sense, right? Well let me tell you, I don't know what the heck that is but it sure ain't the right option to boot from disk. You need to actually make the 'USB CD' option the first one and viola! It works! I did it on a whim because I'd tried everything else, why not right? Turns out I'm the luckiest person in the world and I did a victory lap of the house.

    Hi Daniel,
    thank you for your reply.
    I just checked again if I can boot the RT-system without the floppy disk, from harddisk only - but that doesn't work ("DISK BOOT FAILURE, INSERT SYSTEM DISK...").
    Of course, the boot order in BIOS is set up appropriately to allow booting from harddisk.
    And also, the complete software package was already installed on harddisk via MAX through the previously configured network connection.
    Actually, it seems there is no boot loader installed on harddisk at RT-systems for desktop-PC's.
    The boot loader has to be launched from the floppy boot disk and afterwards, the further boot program is loaded from hard disk.
    Is there anyone who can boot a desktop-PC into RT without the floppy disk? And what do I have to set up in order to make it work for our system?
    Thanks,
    Tom S.

  • How do you unplug the iPhone from the Mac USB port safely?

    How do you unplug the iphone from the Mac USB port safely?

    Click on the little up arrow next to the name of your iPhone to eject the iPhone first.  Then just pull out the USB plug, grasping it by the plastic end of the plug, not the cable.

  • Late 2013 Macbook Pro Retina 15' will not boot an external disk from a Mid-2012 MAcbook Pro. What should I do?

    In order to simplify moving all my files from the previous mid-2012 macbook pro 15' when moving to my new late-2013 macbook pro, i superdup-ed the full hard-disk to an external ssd. Unfortunatelly the new mac resuses to boot from this external disk (i get the grey disk with a line over it). The external disk works just fine so if I boot the new mac from its internal SSD I can read/write the external disk without problems.
    Old OS X is 10.9 as is the OS on the new mac.
    What I need to do is to boot the new mac from the external ssd, use the same superduper to copy the external content onto the internal ssd.
    How can I solve this issue?

    Welcome to Apple Support Communities
    If you made a backup of your files with SuperDuper, use Migration Assistant (in /Applications/Utilities) to transfer your files from the external drive > http://pondini.org/OSX/MigrateLion.html It will create a new user account with the transferred files, so you may want to merge both user accounts > https://discussions.apple.com/docs/DOC-5472
    The Late 2013 MacBook Pro uses a special OS X Mavericks version which makes OS X compatible with it, and older OS X versions do not work with it. That's the reason why you cannot start up from the external drive created from the Mid 2012 MacBook Pro

  • How to call an external server from Webdynpro program?

    Hi All,
    i have a requirement in which i have to call an external server from Webdynpro ABAP program.
    how to imp

    hi ,
    do u mean u need to call the external link from ur WD ABAP application ?
    if so , u either create
    1 a Link to URL ( LTU ) UI element  and call the external link using that
    2 if u wish to use some other fuctionality and thn wish to call the URL in ur application ,u write this piece of code in ur relevant on Action method :
    data:  lo_window_manager type ref to if_wd_window_manager.
    data:  lo_api_component  type ref to if_wd_component.
    data:  lo_window         type ref to if_wd_window.
    data:  ld_url type string.
    lo_api_component  = wd_comp_controller->wd_get_api( ).
    lo_window_manager = lo_api_component->get_window_manager( ).
    ld_url =  ''.  // ur external sever link here
    CALL METHOD lo_window_manager->CREATE_EXTERNAL_WINDOW     
    EXPORTING     URL                = ld_url           
    RECEIVING     WINDOW         = lo_window.
    lo_window->open( ).
    I hope u wud be able to create URL now .
    regards,
    amit
    Edited by: amit saini on Oct 13, 2009 11:25 AM

  • How to boot to Windows XP from Mac Desktop

    Hi
    I have just installed Lepard/BootCamp/Windows XP and am wondering how to get to Windows from Mac when I'm logged on to Mac. I can access it via System Preferences but end up resetting my start up preferences to Windows in order to reboot from there. When I installed Windows it put a folder on my Mac Desktop that has the windows info -- does anyone know how to quickly reboot to Windows? On the XP side, there is a boot camp icon in system tray that allows you to choose to boot over to Mac from there. But not on the Mac side. Apple Tech Support told me there must be an easier way than going through the Sys Pref startup options but he was unable to find it. Suggested I try here. Any hep appreciated!

    I know about the Option key ... when I power on the computer and hold that down, it gives me the option to choose one OS or the other, instead of going to the one I've set in Sys Pref startup ...
    My question is when I have the Mac OS running and want to go to Windows ... the only way I seem to be able to do it is go back into Sys Pref and change the startup OS to windows. It will then give me the option to restart and go there right now, which will get me into Windows but at the cost of resetting the preferred startup OS.
    On the Windows side there is the option to set the start up OS as well, so maybe that's the key? I wondered why you would need to set it on both sides, or have the ability. Maybe that's it! There has to be a better way to go from Mac to Windows than via the Sys Pref option.

  • How to remove an external drive from time machine backup

    In time machine I also backup to an external drive. I recently bought a new external drive and thats working fine. However, it still wants to backup to my previous drive which I dont want to use. In time machine preferences I see the old and new drive listed. Both are greyed out so I cannot deselect the older drive.
    Suggestions?

    mhattonmd wrote:
    So when I open time machine preferences I see time machine and both external drives listed. If I click on options I see both external drives but I cant select either as they are both greyed out.
    If you see them both listed on the initial screen of TM prefs, they are both selected as backup drives. They are not being backed up. They are being used by Time Machine as a destination. You need to use “Select Disk…” to remove the external drives from the destination drives. Select Disk does not choose the drives you want to back up. It chooses the drives you wan to back up to.

  • How to boot up a mac from an external disk?

    After a recent update, my macpro starts and I see the program charging line starting to fill up, but all of a sudden it stops, I hear the hard disks stop rotating and the computer shuts down. Can somebody help me?
    Thanks a lot.
    Ciro

    clone your system so you have bootable backups, and definitely before you make changes to your system.
    as to why you use external for booting, you don't say, nor what type drive interface case which may not seem like a reason, or might.
    Invest in multiple backup methods like Carbon Copy Cloner along with others.
    And by not  saying if you run Mountain or Lion or earlier makes it guess work whether you have a recovery partition but generally it would be on the same hard drive and that doesn't help if it is the drive or the interface.
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner 
    http://www.bombich.com/software/updates/ccc-3.5.html
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    Create an OS X Lion Install disc
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

  • How to boot new/used MacMini from external drive?

    Last week I purchased a used MacMini (2 GHz Intel Core 2 Duo, 4 GB 1067 MHz DDR3) that had OS X 10.5.6 pre-installed. I was starting up from my OSX 10.5 install disk so that I could change the password, but the disk drive got noisy and repeatedly restarted until I ejected the disk.
    Starting up from my desktop LG super multi drive (HL-DT-ST DVDRAM GE20LU11) results in the same loop, even though the LG was selected as the startup disk.
    How do I get the computer to give up on the broken internal drive and use the LG?

    Then your DVD may be dirty or defective or boots a version of OS X that isn't compatible with the Mini model you have. For example, if it was initially released with 10.5.6 and you have a 10.5 DVD, then it will not start that computer. Your DVD also may not work if it is not a retail copy of Leopard, but an OEM disc that only has a PPC version of OS X.

  • How to get Vendor External ID from from  Master aggrement page

    I am now struggling to get the value of a referenced object from master aggrement Page.
    I want to get the Vendor External_ID from vendor name which is getting displayed in Supplier tab of Master aggrement page.
    doc.getVendorRef()
    doc.createApplicationException(null,""+doc.getVendorRef());
    with the above code I am getting the vendor name but we want to get the Vendor External Id. Any suggestions on how to retrieve this value?
    Thanks in Advance.
    Regards
    Su

    The following code will populates Vendor External Id field on the Vendor Info tab of the Master Agreement document.
    Please make sure to create an extension (referred in below code: "VEND_EXT_ID") on the Master Agreement Extensions, and display it below the Vendor Details. Also make sure you make the extension field as READ ONLY.
    //create Vendor home
    VendorIBeanHomeIfc vendorHome = (VendorIBeanHomeIfc) IBeanHomeLocator
    .lookup(session, VendorIBeanHomeIfc.sHOME_NAME);
    // get Vendor External Id
    vendorExternalId = vendorHome.find(doc.getVendorRef()).getExternalId();
    //populate in vendor external id field on vinfo tab
    if(hasValue(vendorExternalId)) { doc.getExtensionField("VEND_EXT_ID").set(vendorExternalId);}
    I hope this helps. Let me know, if you need additional details.
    Regards,
    Parankush

  • How can I stop my SSD from detecting my applications on my HDD?

    I just installed a SSD as my primary drive, and removed my optical bay and moved my HDD to that slot. I installed Yosemite on my SSD and everything is working fine, except that the Mac App store detects the applications on my HDD and keeps opening them from my HDD instead of letting me install them to my SSD. Yes, my SSD is set-up as the boot disk. If it helps, I just want to use my SSD for applications and my HDD for storing files.

    Disabling Spotlight causes it to be reindexed when you reboot to that OS (or kills searching in the other OS).
    Eject the second HD. You can setup an automator action or Applescript to do this on login.
    If you rarely need to use the second HD it is better to setup /etc/fstab to never mount the second HD on boot. You can still mount the disk manually via Disk Utility. Ask if you think this is something you want help to setup.

  • How to change in External Editing from Edit in CS4 to CS5?

    In LR 3.2 (was also in 3.0) Preferences/External Editing it says in the top position "Edit in Adobe Photoshop CS4" even after reinstalling LR 3.2.
    Originally I had installed CS4 and LR 2.7, then I installed CS5 and LR 3.0 but the top position remained with edit in PS CS4. Then I added CS5 as an additional external editor in the Preferences/External Editor, so far ok.
    The problem: If I want to "Merge to HDR in PS" it goes to CS4 and not to CS5. I assume that it would go to CS5 if CS5 would be in the top position but I can't find out how I could change the top position from CS4 to CS5. Any hint would be appreciated as long as it does not say to reinstall CS5 and LR3.

    It's a common problem. You'll need to reinstall CS5 as the Lr is getting the wrong key.

  • Can't boot to external drive from g5

    Hi, I have a new 1TB firewire 800 external drive. I have 1 G5 with leopard 10.5.8 on it, but it had tiger on it at one point.
    I installed tiger onto this external drive (10.4.4) However, after installing, I can't boot to the external drive.
    I have tried going to the startup disk- it shows up in the options, but then just reboots back to my internal HD. I have also tried holding the option key down on restart, but the external disk doesn't show up.
    Please help- I have put a lot of time and effort into this.

    [Western Digital My Book Studio Edition 500GB|http://discussions.apple.com/thread.jspa?threadID=1899888&tstart=0] - is recognized but won't boot.
    [List of Western Digital bootable and non bootable models|http://discussions.apple.com/message.jspa?messageID=9022456#9022456]
    "DO NOT USE a ** WESTERN DIGITAL ** drive..."
    Could well be a problem model, according to the above. I'd see about returning it.

  • HOW TO INTERACT TO EXTERNAL SYSTEM FROM OBIEE.

    Hi Guys,
    REQUIREMENT
    My requirement is need to navigate to a ADF page from my OTBI content passing along login/authentication credentials of ADF page,Such that ADF page should open seamless...
    So far am able to navigate to ADF page ,but every time need to enter the user/login credentials.--- This is the big headache
    So any idea on how to approach this requirement.If any, please share the threads .
    Thanks,
    Govardhana

    You can achieve this by using Action Links.
    http://www.rittmanmead.com/2010/07/obiee-11gr1-action-framework-and-conditions/
    J-

  • How to call an external application from the current one

    Hi Guys,
    Im not sure if/how this is possible.
    For example:
    I have two projects : Project1 and Project 2.
    When I click on a button in Project2, Project1 needs to be launced. That is, the Main class of Project1 needs to be triggered.
    How do I do this? I have tried everything.
    Kind Regards,
    Christiaan

    There is no problem with handling multiple Frame with a javaFX app. Some features are needed to improve that, like AlwaysOnTop, modal, ...
    For exemple it can be used like a splashscreen.
    If your question was about launching anything on your machine, the regular java API can do that.

Maybe you are looking for

  • Anyone know why this program aint working

    i pretty much copied most of the code from an example program but this one doesnt seem to be working the error says i need another } but keeps saying the same thing when i add one import java.io.*; //this is a cprogram i have created so the users dat

  • Colour texts in sapscript

    hi is it possible  to write a text in colour in sapscript?wich comand to use?

  • Using a timer to do a task every 3 seconds

    Hi all, I have to write a program while uses a time for listening for multicasts every 3 seconds while playing a console-based game and I having trouble writing the timer as it is the first time I have used timers. I was wondering if somebody could g

  • Two questions: ical and markspace

    !. Is there a delete keystroke for ical tasks/events? There is a keystroke for cut, copy, and paste, but I can't find one for delete. 2. When I sync my palm with missing sync, events that are not timed on my palm don't show up in ical at all. anyway

  • Why won't my internet work when not connected to wifi?

    My internet won't work when not connected to wifi I have been in the Vodafone shop an they tried everything and could not fix it the last option was to restart the iPhone and it still hasn't worked