How to bring the Tcode FI12 in Production System in EDITABLE mode

Dear Sir/Madam,
The T code - FI12 is not in editable mode in Production System. Is it by default remains in NON Editable mode ? Our FI consultant is saying that the users needed it in Editable mode for maintaining BSR Code.
To bring it to Editable Mode, I have to open the Production Client. Is there any alternate exists to bring this Tcode ( FI12 ) in Edtable mode other than Opening the Client ?
Thanks and Regards,
Pranab

Users needed in editable mode
Is this a one time activity or a permanent?
You can transport the changes from DEV to PRO without opeing a client.
OR
You can create a cusomize tcode with same functionality with secondary index to use the same entities in editable mode.
Just work with your ABAPer and get it done.
Regards,
Nick Loy

Similar Messages

How to bring the labour cost into costestimate

Hi friends,
How to bring the labour cost into costing run, please let us know. i have given the configuration settings but i am not able to get the accurate result. so friends please help me on this.
where were i have to give the config settings and the links please tell me.

Dear,
The cost sheet format is,
1. Material cost,
*2. Labour cost -
SPRO -> Controlling -> Product Cost Controlling -> Product Cost Planning -> Basic Settings for Material Costing -> Overhead -> Costing Sheet: Components -> Define Calculation Bases*
1. Here just check whether you have assigned the Labour cost Cost elements with Labour group or not.
2. T Code - OKTZ : Check whether you have assigned the Cost elemnts here or not
3. Labour cost is based on : Activity types and Cost center figures updation in KP26
Let us know if you still need any help
Thanks
Edited by: nkonnipati on Feb 15, 2012 4:01 PM

SRM 4.0- How to set the default values for product type (01) only for SC

The radio button Service should not be visible.
Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
How to set the default values for product type (01) only for SC
We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
Here we can set defalut value 01 but it is not correct one since same search help is using several places.
We need to limit the search help results only for SC.
Kindly help out me ASAP.

The easiest way to set defautl values is to edit the batch class.
Goto the characteiristic and go to update values.
In here you probably have something like 0 - 100 as a spec range.
On the next line enter the default value within this range. At the end of the line, click in the box in the column labelled "D". This indicates the defautl value for the characteristic.
If you need to you can do this in the material classification view as well.
Just to be clear, these values will only show up in the batch record. You can not have defautl values in resutls recording screens.
FF

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
      MFL1(9) TYPE C,
      MFL2(5) TYPE C,
      MFL3(9) TYPE C,
      MFL4(2) TYPE C,
      MFL5(8) TYPE C ,
     end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
      setid(8) type c,
      end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
   mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
   mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
   mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
   mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
   mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
   mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
   EXPORTING
     FILENAME         = MFILENAME
     FILETYPE         = 'ASC'
   TABLES
     data_tab         = matab1
   EXCEPTIONS
     file_write_error = 1
     invalid_type     = 2
     no_authority     = 3
     unknown_error    = 4
     OTHERS           = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
     MFL5 = '0'.
   CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
    MFL5 = ''.
ENDIF.
concatenate MFL1 ','   into MFL1.
concatenate MFL1 ','   into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
                 "evaluate
*&      Form GET_SOURCE
      text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM.                    "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
<b>Do 1st point in BACKGROUND</b>
1. Read the data file from application server into an internal table using OPEN DATASET
<b>Do 2nd point in Foreground</b>
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

How to delete the queries in BW Production which are no longer existing.

Hi,
How to delete the queries in BW production which are no longer existing in DEV.
1. I tried Using RSZDELETE in Production it is not getting deleted and the below message given.
Query object 4A7V83T3RB4ABIOKSDJT2HWDL is blocked. Deletion has been cancelled.
2. I tried creating another query in dev with the same technical name and send a transport with deletion
it is not working.
Please advise me on this for any function module or any other method.
Thanks
Surya

Hi,
If you transported the query from DEV and now you want to delete it, you should open a BEx request (Dev Class under which it was originally transported -- or-- Standard - type) in DEV delete the query and move the transport to Production.
As far as your error is concerned, usually when you can delete a query using the delete option in query designer itself,
Business Explorer> query-> delete objects , when you press execute the system offers you a list of dependent objects on the query(workbook,views), in case the sysytem is unable to delete them i.e.they being used as a input query for a characteristic variable (replacement path),then system throws this error.You can delete these all depndents under there prescribed roles , fav s & then proceed.
Hope this will be expedite.
Thax & regards.
Vaibhave Sharma

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

How to get the Change node in Production Server!!!!!

Hi Guys,
Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
Regards
Ansuman Mohanty.

Hi Mr!
If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
All the best:-)
Kind Regards,
Saisree.S

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA

This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA

Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer

How to bring the hyperlink in a JLabel object ?

How to bring the hyperlink in a JLabel object ?
I tried the following--> [ this is a sample ]
JLabel label;
label=new JLabel("<HTML><A HREF='file://D:/Examination/calc.exe'>Calculator</A></HTML>");Using this JLabel object in an JDialog the label comes perfectly with such a look of the hyperlink
[ Blue coloured and underlined ] that's all !!
It doesn't work anything that it should do.
While all the html tags work perfectly in java then why the hyperlink in label doesn't ?
If you have an idea then please send me the code.
Thanks!

see JXHyperLink at https://swingx.dev.java.net/
Yeah, I looked at this. I agree with the other guy who said that all this does, presumably, is change the color of the text when the button is getting mousedover. That doesn't solve anything.
As far as JEditorPane, it has its bad points and ... well, mostly bad points. However that's not really fair. JEditorPane was not designed to be on the level of an IE or FireFox.
The BEST thing to use JEditor's web browsing facilities on is for creating your own documentation and help pages for software you are developing. Here is a list of some of the things JEditorPane does not come equiped with (as of 1.4 I haven't tried playing with it in 1.5):
1. Form submission, PUT, and GET
2. Download status
3. Caching
4. Cookies
5. Plugins (ie Java, Flash, Quicktime)
6. No javascript.
Beyond that it is extremely brittle in parsing the HTML, and if the HTML is not totally well formed (and many pages are not) you won't get anything

How to create the BOM for co product

Dear friends,
How to create the BOM for Co product and How the production will create and how the costing will capture for that.
Regards,
Sabhapathy R

Dear Umesh,
How Bom created for co product
By product
Header
xxx
101
mvt
mvt
qty
item
yyy
261
1
zzz
531
0.5-
By product
Same way how we create co product for BOM. pl explain with simple example.
Thanks &regards,
Sabhapathy R

How to bring the Cost of Depreciation to Costing

Hi,
How to bring the Depreciation Cost, Interest on Working capital to Costing.
We have created the Cost components for those mentioned items and what criteria we can bring the values to Costing.
Thanks
Prasad

It's a big topic, ahah.
Depreciation, Interest and Capitals must be different primary cost element, right?
Maintain cost component structure TC:OKKN to make sure your cost component split is by primary cost element splitting. Assign the cost elements of depreciation, interest or capitals to relevant cost component.
Two way to define the cost bring to cost components,
1. Define splitting structure TC: OKES and assign to manufacturing cost centers TC:OKEW
2. Conduct activity type dependent planning through TC:KP06.

Can any body tell me how to use the TCODE:ABF1 ?

Can any body tell me how to use the TCODE:ABF1 ?
Can any body tell me the different of the ABF1 and FB01?
Thank very much.

Hi Jie,
both Transaction codes are working are same.
Both are working through program : SAPMF05A.
Packages are different: FIDC & AB.
FB01 : we can control objects through F_BKPF_BUK
Hope its clear.
Kishore K

How to find the TCODE that is created for the table maintanance generator

Hi ,
How to find the TCODE that is created for the table maintanance generator of particular table,if we only know the table name.
Regards
Ramakrishna L

Hello,
I try it this way
1. Goto SE16 --> enter table TSTCP.
2. In the selection-screen displayed, enter
PARAM = *<ZTABNAME>*
You will get the t-code for the TMG.
BR,
Suhas
PS: Are you sure a t-code has been created for this TMG ?

How to create the log file in remote system using log4j.

Hi,
How to create the log file in remote system using log4j. please give me a sample code or related links.The below example i used for create the log file in remote system but it return the below exception.Is there any authandication parameter for accessing the remote path? Please help.
public class Logging
Logger log=null;
FileAppender fileapp=null;
public Logging(String classname)
try
log = Logger.getLogger(classname);
String path=" [\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt|file://\\192.168.0.14\\c$\\LOG\\d9\\May_08_2008_log.txt]";
fileapp = new FileAppender(new PatternLayout("%r [%t] %-5p %c %x - %m%n"),path, true);
log.addAppender(fileapp);
log.info("Logger initilized");
}catch(Exception ex)
ex.printStackTrace();
java.io.FileNotFoundException: \\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt (The network path was not found)
at java.io.FileOutputStream.openAppend(Native Method)
at java.io.FileOutputStream.<init>(Unknown Source)
at java.io.FileOutputStream.<init>(Unknown Source)
at org.apache.log4j.FileAppender.setFile(FileAppender.java:290)
at org.apache.log4j.FileAppender.<init>(FileAppender.java:109)
at annwyn.logger.BioCapLogger.<init>(Logging.java:23)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Please help.
Thanks in advance.
Saravanan.K

Sorry path is missing for the above request.
path="\\192.168.0.14\c$\LOG\d9\May_08_2008_log.txt ";
please help.
Saravanan.K

How to bring the Tcode FI12 in Production System in EDITABLE mode

Similar Messages

Maybe you are looking for