How to build a multiselect with (nested) and and or conditions

Hi,
I have to tables: persons and categories. I would like to build functionality to enter values for categories, with a combination of and- and or- conditions (nested) to select persons.
Has anyone an example how to do this ?
Any reaction will be appreciated.
Leo

Reporting is not limitted in the MP you can perform in the same way as you do reporting on the single IC or DSO.
No its not like that like you can only select common fileds in both the info providers. you can also identify the fileds that are not common to both the info providers.
For example, the report need both customer's accounting number and sales order number. But accounting number only in accounting cube while sales order number only in sales order cube. Then how can I meet the requirement?
We have a constant selection option in the query designer while reporting on this fileds we will use this function.
inorder to meet the above requirement please check the below link which gives you detailed information regarding your requirement.
for more details chk the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?quicklink=index&overridelayout=true
Regards
KP

Similar Messages

How to build the FM data I_header and I_orgdata

hi all,
Im working on the conversion program for AVL using the following function modules
BBP_PD_AVL_GETLIST
BBP_PD_AVL_CREATE
BBP_PD_AVL_UPDATE
BBP_PD_AVL_SAVE
In the function module BBP_PD_AVL_CREATE , how to build the FM data I_HEADER and I_ORGDATA.
I'm giving 3 input in Export parameter in BBP_PD_AVL_GETLIST and E_pdlist should contain data .
but e_pdlist is not getting data...any suggestion..
after execution it was showing "Buffer table is not up to date"
with regards,
P.lokesh

Hi Lokesh,
We are also encountering same problem.
How did you solve your problem?
Would really appreciate your help.
Thanks,
Kezia

How to build a array with high sampling rates 1K

Hi All:
Now I am trying to develop a project with CRio.
But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
Is there anyother good way to build a data arrary for high sampling rates??
Thanks
Attachments:
Building_Array_high_rates.JPG ‏120 KB

Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
Let me knwo if you have more qeustions
CLA, LabVIEW Versions 2010-2013
Attachments:
RT.PNG ‏36 KB
FIFO read.PNG ‏4 KB

How to build a screen with master detail data

Hi ,expert ,
Someone can teach me how to build a screen with master detail table ?
I wnat to build a screen for user to maintain FERT group and FERT detail list in one screen .
just like this ..
MASTER Block
FERT1
FERT2
FERT3
DETAIL Block
FERT1A1
FERT1A2
FERT1A3
when I double click FERT1 in the Master Block the detail view will show FERT1A1 A2 A3
Thanks for your help ....
Moderator message : Not enough research before posting. Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 1:38 PM

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

How to build demo versions with Labview ?

Hello,
is it possible to design Labview applications in a kind,
that it is possible to generate "demo versions" of it ? Demo version in the means of feature-limited crippled versions of a full instrumentation software, where SOME hardware access is denied, but you can load and view and analyse data.
Of course it might be useful to compile this demo version with the Labview Application Builder,
What might be the business modell for demo versions:
A hardware manufacturer creates a Labview application which controls the manufacturer's components, and allows instrumentation and data recording. The application is not free but sold for extra money.
As pre-sales benifit, the manufacturer would like to send the (compiled) Labview application to future customers.
Now the problem is, that the customer has not (all) the external devices or PCI/USB devices,
on the other hand the hardware manufacturer does not want to give the "full application" as gilft to the customers.
Now with traditional software development with C++, Java, C#,
either a demo version is gained from the full version by replacing some module with hardware access by modules wth "empty" function body or with function body which return constant values instead of accessing the hardware.
In the world of process industry, usual process control systems may supply "alternative" values if the original device is not available.
What kind of software structure must I build with Labview, to do the same ?
Now the problem with Labview applications is
Labview applications depend on drivers. Drivers depend on hardware.
So if the FULL commercial version of the Labview program accesses a DAQmx driver, GPIB driver or any other hardware driver by a VI,
and often this means that a special manufacturer VI is used in the Labview program which does the actual hardware access,
how to modify the software to make a demo version
a) so that IF the customer buys the hardware and gets the hardware driver, he still does not have the full version
b) so if the customer neither has the hardware nor the driver, he still can run the Labview software and load an view data, push buttons, can execute menu items even can manipulate data ect, can use the manufacturer's VI
Unfortunately, it is no solution just to delete "some" of the VIs with hardware access from the distribution of the demo version, as this just causes error messages during the loading of the (compiled) Labview demo application.
Message Edited by hemmerling on 01-11-2007 12:35 AM
Message Edited by hemmerling on 01-11-2007 12:37 AM

Thanks alot.
Conditional Disable and Diagram Disable Structures
http://zone.ni.com/reference/en-XX/help/371361B-01/lvconcepts/cond_diagram_disable/
are indeed at least a part of what I wanted.
Anyhow, as such "suspended" VIs are often the *source* of signals,
so there must be an addtional method how to provide "alternative" signals for the demo version,
which does not make the administration / further development the full version too complicated...
For example: The VI for an external signal generator device is disabled, but alternatively it would be nice if the users of the demo version can get a fixed sinus signal instead...
How to do that with Labview and the "Conditional Disable and Diagram Disable Struktures",
and can I test this all even without Labview Application Builder, in the full development system ( so that I don´t need the compiler for frequent checking ) ?
Btw, with what version was this "Conditional Disable and Diagramm Disable" feature introduced ? Is ist already available with Labview 7.0, /.1 ?
Sincerely
Rolf

How can I start anew with Photos and clear the (minimal) stuff it has uploaded

I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>

How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
FROM: Terry Weber, Email: [email protected]

https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

Anyone know how to gernerate CRUD applications with flex and coldfusion?

Anyone know how to gernerate CRUD applications with flex and
coldfusion? I am working with a remote coldsfusion installation
with MS SQL and I don't have RDS.

You might investigate "squidhead". It is CF based. I'm not
sure if it has any Flex related features.
http://squidhead.riaforge.org/

How to find index name with primarykey and column on a table?

Hi,
how to find index name with primarykey and column on a table?
please help me.
Thankyou.

1 select ac.table_name, ac.index_name, aic.column_name
2 from user_constraints ac, user_ind_columns aic
3 where ac.constraint_type = 'P'
4   and ac.index_name = aic.index_name
5* order by 1,2,3
SQL> /
TABLE_NAME                 INDEX_NAME                COLUMN_NAME
ACTION_TABLE                 SYS_C0011033                NESTED_TABLE_ID
ACTION_TABLE                 SYS_C0011033                SYS_NC_ARRAY_INDEX$
CATEGORIES_TAB                 SYS_C0011038                CATEGORY_ID
CUSTOMERS                 CUSTOMERS_PK                CUSTOMER_ID
INVENTORIES                 INVENTORY_IX                PRODUCT_ID
INVENTORIES                 INVENTORY_IX                WAREHOUSE_ID
LINEITEM_TABLE                 SYS_C0011034                NESTED_TABLE_ID
LINEITEM_TABLE                 SYS_C0011034                SYS_NC_ARRAY_INDEX$
ORDERS                      ORDER_PK                 ORDER_ID
ORDER_ITEMS                 ORDER_ITEMS_PK                LINE_ITEM_ID
ORDER_ITEMS                 ORDER_ITEMS_PK                ORDER_ID
PRODUCT_DESCRIPTIONS            PRD_DESC_PK                LANGUAGE_ID
PRODUCT_DESCRIPTIONS            PRD_DESC_PK                PRODUCT_ID
PRODUCT_INFORMATION            PRODUCT_INFORMATION_PK           PRODUCT_ID
PROMOTIONS                 PROMO_ID_PK                PROMO_ID
WAREHOUSES                 WAREHOUSES_PK                WAREHOUSE_ID
16 rows selected.

How to build a table with predifined? Like Huffman decoding, there are 34 predefined tables?

I am trying to use Labview for mp3 huffman decoding. there are 34 predefined tables for lookup purpose. I tried build array control, but it is so hard to assign value with size of 16. What is the better way to create predefined array? And how to do lookup table with Labview?

IMHO, the best way to have something "predefined" is to read this data from a "setup/configuration" file (if you don't want to use "default settings" LV feature). The choice of the format for all the data that you want to store in some kind of configuration file is up to you.
Also, constructing a "lookup table" in LV doesn't seems different as for any other programming language.

How to build a array with collected data

Hi,
I have collected data from serial port with VISA. Now I want to build a array with 100 date points. Should I connect VISA Read with Build Array directly? How to do it?
PS: All of them are in a While Structure.
Thank you!

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

For a READ TABLE how to build a dynamic WITH KEY condition?

Hi All,
I have a Z table with 6 fields. The first field is the Plant and is the key field. This field can be matched with the field from selection screen. Now I have 4 character fields which can contain various values. Now I have another field at the end of the table and this field is the one which I will need for further processing.
Now this last field will be selected based on the data for first 5 fields.
This Read is performed in a loop and the data for all the 4 character fields may not be present.
Now my problem is how to build a Read statement for this table where I need to get the value of the Last field based on the values of first 5 fields?

Hi,
    Use
IF    you have internal table With header line then use
      REad Tablename with key field1 = value1   field2 = value2      field3 = value3        field4 = value4    field5 = value5.
If sy-subrc = 0.
endif.
if you have internal table WithOut header line then use
     REad Tablename into workArea with key field1 = value1   field2 = value2      field3 = value3        field4 = value4    field5 = value5.
If sy-subrc = 0.
endif.
regards,
Amit

How to build cepstrum analysis block diagram and validating ?

hello all.
intoduce, i'm hogeng. i'm a newbie in using LabVIEW to vibration analysis (faults diagnostics).
how to build the cepstrum analysis block diagram and validating the cepstrum block diagram?

the advanced signal processing toolkit for LabVIEW provides cepstrum functions and examples. These are also described in the manuals on line for the advance signal processing toolkit as well as on several developer zone documents. Simply search ni.com for cepstrum.
If you need help analyzing a vibration signal with cepstrum, our sound and vibration team may be able to review a data file to assist you.
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

How to add a JPanel with label and border line

hi,
I want a Jpanel with label and border line like this.Inside it i need to have components.Is there a resuable component to bring this directly??
Any solution in this regards.???
Label-----------------------------------------------------------
| |
| |
| |
| |
| |
|________________________________________ |

[url http://java.sun.com/docs/books/tutorial/uiswing/misc/border.html]How to Use Borders

How to build a multiselect with (nested) and and or conditions

Similar Messages

Maybe you are looking for