How to build a package from local files?

I have a couple of git projects cloned on my hd which I'd like to package. Now, it seems unneccessary to make a tarball of the files and move it to the build directory.... I've also tried to add the path to the source dir as the source line -- source=("/path/to/repo/*"), but that doesn't work either.
what's the correct way to do this?

Not quite, but close enough, I suppose. I have a ~/src tree and a ~/pkg tree, and my original question was -- to be more precise -- if I can tell makepkg, directly or in the PKGBUILD, to look in a certain folder in the src tree for the files to use for the pkg. I guess I can symlink to the ~/src directory. Thanks for the pointer.

Similar Messages

How to build a package from sources

hi all,
Can someone please give some advices regarding making binaries from sources. I have found that a lot of programs on Snow Leopard can be also run in terminal and are in source form and need to be build. I have installed Xcode already and I have some programming skills as well such as using MinGW (GNU GCC) and VS EE on WinXP. I have never done anything in any UNIX-like system and I know sources need to be just compiled.
Please, give me a link if you have any =)
Regards.

I think you have done something in a UNIX-like system. MinGW is designed to provide a UNIX-line build system with GCC for Windows. Now, however, you have the real thing.
In most cases, all you need to do is extract the source tarbar into a directory (or checkout via CVS or SVN). Go into that directory with the Terminal and type "configure" and, if that goes well, "make", and if that looks good "sudo make install".

How to install packages from local folder

Hi all,
I have downloaded all arch linux packages from the following URLs:
ftp://mirrors.kernel.org/archlinux/core/os/i686/
ftp://mirrors.kernel.org/archlinux/extra/os/i686/
ftp://mirrors.kernel.org/archlinux/community/os/i686/
and then have saved them to an external hard disk. Then I have attached that external hard disk to my system and packages are available in following folders:
/mnt/external_hd/Arch_Linux/Core-OS/
/mnt/external_hd/Arch_Linux/Extra-OS-1/
/mnt/external_hd/Arch_Linux/Extra-OS-2/
/mnt/external_hd/Arch_Linux/Community-OS-1/
/mnt/external_hd/Arch_Linux/Community-OS-2/
/mnt/external_hd/Arch_Linux/Community-OS-3/
Now I want to install some or all packages from these folder with the help of pacman command. I am seeing that package corresponding to wvdial command is available in the /mnt/external_hd/Arch_Linux/Extra-OS-1/ folder. But how to use pacman command so that I can install wvdial package from that folder?
In addition to this if I want to install ALL Extra Packages available in the folders /mnt/external_hd/Arch_Linux/Extra-OS-1/ and /mnt/external_hd/Arch_Linux/Extra-OS-2/ then how to execute the pacman command?
Please send me step by step instructions so that I shall be able to install some or all downloaded packages.
I shall remain thankful for this forever.
Best Regards ...
Pankaj Kumar

Hi fukawi2,
Thanks for reply and searching for my username on google. It is true that I am a freelance s/w developer but I am not installing Arch Linux for any client. I am installing it due to some other reasons. In fact I started working on Red Hat and then on Fedora when I was a student of bachelor degree course in computer applications. Then later I searched open suse and started using it. I am using open suse from its 10.1 version. However the recent version of this distribution has become much resource consuming. So I am in the need of a light weight linux distribution. And I encountered Arch Linux. Then I purchased its installation disk from an online shop and installed it on my system. But only text mode is working at this moment. Since I want to use X window and so I started to follow the syntax of pacman command. But it is connecting to internet. Since my internet connection is slow (average speed of 10kbps) and so I requested the same online shop to download all packages from Arch Linux repository and send them to me. Therefore now I am having all those packages in my local external hard disk drive in the folder mentioned in my first post. Now I want to install packages from these folder. And so in order to get help I have come to this forum.
I have also followed the steps given on the pages https://wiki.archlinux.org/index.php/Pa … l_commands and https://wiki.archlinux.org/index.php/Pa … repository. But when I am trying to install a particular package using the following command:
pacman -U wvdial
then it is asking for a dependency. I know that the dependent package in my local folder but why it is not being automatically taken by pacman command? Can you please explain it.
That is why I am asking help only for customization and usages of pacman in order to install packages from local folder. But each member in this forum is only referring to long written manuals and not giving me exact solution which I think will involve four/five steps.
Best Regards ...
Pankaj Kumar

How to use utl_ftp package to transfer files from one system to another

Hi all,
How to use utl_ftp package to transfer files from one system to another using plsql procedure .
I failed to find the appropriate document ,kindly help me .
Thanks,
P Prakash

prakash wrote:
I am sorry tell you, this blog is not enough to for me.It's not a blog, it's Chris' website where you download the package from. Once you download the package and unrar it, then the package spec gives instructions (and I think there's instructions on how to install it too).
Kindly let me know if there is any oracle documentation for this .It's not an Oracle created package, it was created by Chris. It's based around the UTL_TCP package if you really want to get into the nitty gritty of how it works, but I don't think you do.

How to get folder(directory path only not file path) from local file system

Hi Firends,
How to get folder(directory path only not file path) from local file system , whenevr i will click on browse button.
Please give reply for this one , if anybody knows.
Thanks,
Anderson.

Hi Anderson,
if you're using flash.filesystem.FileReference - then it is run in black box - except of filename, size and creation data (and few other properties available after some operation succeeded). This is part of security features in Flash runtime (described in header section):
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/net/FileReference .html
This for example implies that user can download a content to local machine - but that content cannot be loaded back into Flash runtime. For this you would need either Air runtime flash.filesystem.File:
http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/filesystem/File.h tml
(so you would created Air runtime based application: desktop or mobile but not web, even as standalone project) or you would need one of 3rd party tools that add file access/file information features to standard Flash runtime applications converted to standalone native applications.
hth,
kind regards,
Peter

Compiling a package from source files

I am trying to install a package from source files. The installation instructions for this package say that I should just download the scripts to one directory, enter the correct paths in the Makefile (which comes with the package) and run "make".
The problem is that while the g++ compiler is there on my computer
(there is a binary called g++ located at
/Developer/usr/bin/g++
I am not sure if that is the real compiler. Or where the c header files are, for instance, I can't find math.h, or stdio.h or any of the other standard files.
Any help will be greatly appreciated. I am very new to command lines, so please explain as you would to a five year old.
To help with specifics, I edited the Makefile so that the first part looks like:
#MATLABDIR ?= /usr/local/matlab
# for Mac
MATLABDIR ?= /Applications/MATLAB_R2008b.app
CXX ?= g++
#CXX = g++-4.1
CFLAGS = -Wall -Wconversion -O3 -fPIC -I$(MATLABDIR)/extern/include
Thanks a ton for the help

Your compiler program is gcc. (/usr/bin/gcc).
http://gcc.gnu.org/
in terminal type (at the prompt):
gcc --version
(press return)
should output the following:
i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1 (Apple Inc. build 5646) (dot 1)
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
If it does, your compiler is alive and kicking and ready for action, if not, reinstall developer tools
package from your SL install DVD.
The usual ritual for compiling is to drag the directory containing the source code to your desktop,
then, in terminal, change terminal path to the source directory using the change directory command
"cd".
example; say I have a program called cdrtools 2.0.1 and the source is in a folder I dragged to my
desktop called cdrtools_2.0.1:
In terminal i would type:
cd /Users/kj/Desktop/cdrtools_2.0.1
Follow the instructions that come with the package. Typically they will tell you to:
./configure
( Many packages have a configure script which will query your system and configure themselves
appropriately. Not supported by all software).
make
( Compile the software. Some require a file name to build such as make foo. make reads a file
normally called Makefile for what commands to run).
make install
( Install the software. Typically packages will put themselves in /usr/local. Run as root).
That is the usual ritual, but you must follow the instructions that come with the software, as they
may vary.
Read documentation!
Look for files called: INSTALL, README, SETUP, or similar.
For more information see the following:
http://luv.asn.au/overheads/compile.html
Now beware that some source code written before Snow Leopard was released may not compile
properly on SL, because of SL's 64Bit gcc extensions. If the source has not been updated to run
under the Snow Leopard compiler, then the compilation may fail.
IF the program fails to compile, or fails to run after compiling, then most likely, then the source
may need updating.
good luck, and don't pull all your hair out at once. Save some for later.
The guys in the 'NIX forum can help you with all the grizzly details as you go on your quest.
http://discussions.apple.com/forum.jspa?forumID=735
Good luck,
Kj ♘

How to load the data from excel file into table in oracle using UTL_FI

How to load the data from excel file into table in oracle
and from table to excel file
using UTL_FILE package
Please give me some example

This is something i tried in oracle apex
http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
Regards,
CKLP

How to remove a package from package structure?

Hello profs,
i have a problem. I add a package 'A' to another package 'B' in the package builder.
Now i don't know how to remove package 'A' from the list of package 'B'.
I have not found in the docu of package builder how to remove a package from the included list.
Has somebody an idea how to do it?
Thanks a lot.

I found out that the relation between the packages saved in table TDEVC.
Field PARENTCL contains the surrounding package 'B' of the package 'A' field DEVCLASS.
At the moment the only way to remove the package is to modify the table.
But i look for another possibility for this issue.
Best regards
Waldemar

How to install a package from a disc

i have the file sudo-1.7.2p3.tar on a disk and i need to know how to install a package from a cd, what lines do i need to type to install it?:|

If you are running as root, you can execute that command as ../../b43-fwcutter-011/b43-fwcutter -w "$FIRMWARE_INSTALL_DIR" wl_apsta.o and there is no need for sudo.
Btw, what wireless card is this? Have you tried searching for a pacman package for it?
To access the cd drive, use the mount command. Enter man mount to read the manual. (I assume you do not have a graphical environment set up yet.)
Last edited by fsckd (2010-05-12 04:37:52)

How to get Date Format from Local Object.

Hi All,
I am new to Web Channel.
I need to know Date format From date of locale.
suppose there is a date "01/25/2010" date in date field I want to get string "mm/dd/yyyy". Actually I have to pass date format to backend when I call RFC.
Is there any way to get Date format from "Locale" object. I should get date format for local object
I get local object from "UserSessionData" object but how to get Date format from it.
I am not looking for Date value. I am looking for current local date format ("mm/dd/yyyy or dd/mm/yyyy or mon/dd/yyyy) whatever local date format. I could not find example which show how to get date format from "Locale" object.
Any help will be appreciated with rewards.
Regards.
Web Channel

Hi,
You can get it from "User" or "Shop" business object.
Try to get User or Shop Business Object as shown below.
BusinessObjectManager bom = (BusinessObjectManager) userSessionData.getBOM(BusinessObjectManager.ISACORE_BOM);
User user = bom.getUser();
char decimalNotation = user.getDecimalPointFormat().getGroupingSeparator();
If you are seeing "1,234.00" then above code will return "."
I hope this information help you to resolve your issue.
eCommerce Developer.

How to call a package from the Report in Oracle Application Express

How to call a package from the Report in Oracle Application Express

Hello,
What do you mean? Something like SELECT mypackage.function( par1, par2) from dual?
Or do you want to execute a procedure when something happens on the page, like clicking a button?
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

How to read the data from Excel file and Store in XML file using java

Hi All,
I got a problem with Excel file.
My problem is how to read the data from Excel file and Store in XML file using java excel api.
For getting the data from Excel file what are all the steps i need to follow to get the correct result.
Any body can send me the code (with java code ,Excel sheet) to this mail id : [email protected]
Thanks & Regards,
Sreenu,
[email protected],
india,

If you want someone to do your work, please have the courtesy to provide payment.
http://www.rentacoder.com

How to Load the data from excel file(Extension is .CSV) into the temp.table

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Hello Sachin,
You can use the following metalink note:How to Read Data from an EXCEL Spreadsheet into a Form Using Webutil Client_OLE2 (Doc ID 813535.1) and modify it a little bit.
Instead of copy values into forms you can save them in your temporary table.
Kind regards,
Alex
If someone's helpful or correct please mark it accordingly.

How to load the data from .csv file to oracle table???

Hi,
I am using oracle 10g , plsql developer. Can anyone help me in how to load the data from .csv file to oracle table. The table is already created with the required columns. The .csv file is having about 10lakh records. Is it possible to load 10lakh records. can any one please tell me how to proceed.
Thanks in advance

981145 wrote:
Can you tell more about sql * loader??? how to know that utility is available for me or not??? I am using oracle 10g database and plsql developer???SQL*Loader is part of the Oracle client. If you have a developer installation you should normally have it on your client.
the command is
sqlldrType it and see if you have it installed.
Have a look also at the FAQ link posted by Marwin.
There are plenty of examples also on the web.
Regards.
Al

How to load the data from excel file into temprory table in Forms 11g?

Hi
How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
Kindly Suggest the Solution.
Regards,
Sachin

Declare
    v_full_filename         varchar2(500);
    v_server_path           varchar2(2000);
    v_separator             VARCHAR2(1);
    v_filename              VARCHAR2(400);
    filename                VARCHAR2 (100);
    v_stop_load             varchar2 (2000);
    v_rec_error_log         varchar2(4000);
    v_error_log             varchar2(4000);
    ctr                     NUMBER (12);
    cols                    NUMBER (2);
    btn                     number;
    RES                     BOOLEAN;
    application             ole2.obj_type;
    workbooks               ole2.obj_type;
    workbook                ole2.obj_type;
    worksheets              ole2.obj_type;
    worksheet               ole2.obj_type;
    cell                    ole2.obj_type;
    cellType                ole2.OBJ_TYPE;
    args                    ole2.obj_type;
    PROCEDURE olearg
    IS
    args   ole2.obj_type;
    BEGIN
    args := ole2.create_arglist;
    ole2.add_arg (args, ctr);
    ole2.add_arg (args, cols);
    cell := ole2.get_obj_property (worksheet, 'Cells', args);
    ole2.destroy_arglist (args);
    END;
BEGIN
v_full_filename := client_get_file_name(directory_name => null
                                 ,file_name      => null
                                 ,file_filter    => 'Excel files (*.xls)|*.xls|'
                                                                        ||'Excel files (*.xlsx)|*.xlsx|'
                                 ,message        => 'Choose Excel file'
                                 ,dialog_type    => null
                                 ,select_file    => null
If v_full_filename is not null Then
v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
v_filename := v_separator||v_full_filename ;
:LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);
RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));
--Begin load data from EXCEL
BEGIN
    filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
    application := ole2.create_obj ('Excel.Application');
    ole2.set_property (application, 'Visible', 'false');
    workbooks := ole2.get_obj_property (application, 'Workbooks');
    args := ole2.create_arglist;
    ole2.add_arg (args, filename); -- file path and name
    workbook := ole2.get_obj_property(workbooks,'Open',args);
    ole2.destroy_arglist (args);
    args := ole2.create_arglist;
    ole2.add_arg (args, 'Sheet1');
    worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
    ole2.destroy_arglist (args);
    ctr := 2;                                                     --row number
    cols := 1;                                                -- column number
    go_block('xxx');
    FIRST_RECORD;
    LOOP
            --Column 1 VALUE --------------------------------------------------------------------
        olearg;
        v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        :item1 := v_stop_load;
        cols := cols + 1;
          --Column 2 VALUE --------------------------------------------------------------------
        olearg;
        :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
        cols := cols + 1;
        --<and so on>
    ole2.invoke (application, 'Quit');
    ole2.RELEASE_OBJ (cell);
    ole2.RELEASE_OBJ (worksheet);
    ole2.RELEASE_OBJ (worksheets);
    ole2.RELEASE_OBJ (workbook);
    ole2.RELEASE_OBJ (workbooks);
    ole2.RELEASE_OBJ (application);
END;
--End load data from EXCELPlease mark it as answered if you helped.

How to build a package from local files?

Similar Messages

Maybe you are looking for