How to build a tuxedo client execute file with C++Builder?

Hi,all.
I can add include file with #include.Add include path and lib path to project option.Add
libengine.lib,libfml.lib,libfml32.lib,libtux.lib to project file.I can build the
project without error.And communicate with the local tuxedo server successfully.But
I've failed to communicate with a remote tuxedo server.For I know that use buildclient
-w to build a C windows client file.How to build a GUI client project with C++builder?
Thanks.
david

David,
For a /WS client, you need a different set of libraries than those you have listed.
To see which, run buildclient -w -v
Regards,
Peter.
david wrote:
Hi,all.
I can add include file with #include.Add include path and lib path to project option.Add
libengine.lib,libfml.lib,libfml32.lib,libtux.lib to project file.I can build the
project without error.And communicate with the local tuxedo server successfully.But
I've failed to communicate with a remote tuxedo server.For I know that use buildclient
-w to build a C windows client file.How to build a GUI client project with C++builder?
Thanks.
david

Similar Messages

How to get the loaded client sequence file path/name?

I added a step in Process model, and wanted to get currently loaded client sequence file name/path. I used the variable of "SequenceFile.Path" but then I realized what I would get is the process model file path, not loaded client sequence file path/name. How can I get loaded client sequence file path/name?
Thanks!
Jacky

I dont understand what you are trying to achieve. Can you provide more information.
If you are trying to dynamically load and run a client sequence file at run time you need to make a couple of calls to the TS API from inside the process model, Engine.GetSequenceFileEx to get a reference to your sequence identified by its pathname, and then Execution.ClientFile to tell the process model which sequence you want to run.
Steve
There are 10 types of people in the world that understand binary, those that do and those that don't.

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

How do I create an interactive PDF file with variable data

We would like to basically do a 'mail merge' of our list of customers with an interactive PDF file (including videos, menus, etc - not just form fill out and web links) to create a single PDF file that contains multiple mail pieces ... one for each customer ... with each mail piece being customized for that customer. Customizations would include different greetings (Dear Bob, Dear Dana, etc), as well as different charts based on data unique to the customer, different photographs, etc.
I've seen that InDesign and Acrobat Professional can be used to create an interactive PDF (such as from http://tv.adobe.com/watch/ask-the-adobe-ones/14-calling-rufus-about-interactive-pdf-making). However I don't understand how I can insert data from a database, csv file, excel file etc into the PDF file so that each page, or each set of pages, within the PDF can be customized.
Can anyone point me to a tool to use for this?
Thanks,
Bob Kendall

For that kind of volume and unattended operation, you want InDesign Server – which is the server/high volume edition of INDD.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 3 Nov 2011 06:58:07 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How do I create an interactive PDF file with variable data
Re: How do I create an interactive PDF file with variable data
created by Ti26E31DSxxx<http://forums.adobe.com/people/Ti26E31DSxxx> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4005459#4005459

How do I create an after effects file with an interchangeable image

Hey,
hope someone can help me, I'm using after effects to create a mp4 file, it contains a photo which has a animation super imposed ontop of it.
When the projects finished the base photo that the animation is created around could change up three times a day.
What I'm trying to work out is a way for a non technical user to just be able to upload the new photo to somewhere and for the animation to be created and returned somehow to him so that the animator doesn't have to re open and edit the affect effect project each time a new photo comes in.
Is there a way to do this built into after effects does any one know?
Thanks for any help

For that kind of volume and unattended operation, you want InDesign Server – which is the server/high volume edition of INDD.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 3 Nov 2011 06:58:07 -0700
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: How do I create an interactive PDF file with variable data
Re: How do I create an interactive PDF file with variable data
created by Ti26E31DSxxx<http://forums.adobe.com/people/Ti26E31DSxxx> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4005459#4005459

How to delete pages in a pdf file with mac OSX Mavericks?

Indeed i don't have Pages options in my tools window... Is that normal for the mac version? Please it's urgent...

Sorry, it was my fault. When I searched on the Internet, I was reading the Acrobat help pages, without knowing it, because in my research I wrote "how to delete pages in a pdf file with Adobe reader", i was just automatically redirected toward Acrobat help but i didn't notice.
So no incorrect information exist in the Reader Help pages.

How to associate 1997-2003 Word doc files with Word 2010?

Hi
I am surprised not to be able to find out how to associate word 1997-2003 Word files with Wrod 2010. The object is to have Word 2010 open the document when I click on the document. Many of my Word 1997-2003 documents were created using Word 2010.
When I try to use the associations function in Windows 7 I cannot find the Word program. Checking "Properties" on the Word Icon leads to a program called "CVH.EXE" which does nothing when I try to open doc files with it.
Thank you.
David
lifeform23

Hi,
From your description , I understand that you want to open the prior Word doc files in Word 2010.
You can refer to the KB article that resolve this issue:
How to open and save Word, Excel, and PowerPoint 2007 or 2010 files in earlier versions of Office programs
http://support.microsoft.com/kb/924074
Sincerely,
Harry

How to handle 2 or more .jar files with an applet

Hey out there
I have created an ftpClient application that uses "jakarta ftpClient". It works fine as an JFrame application � But when I converted the Application into an JApplet I get the following Exception:
java.lang.NoClassDefFoundError: org/apache/commons/net/ftp/FTPClient
I have bundled the main application into a .jar file (Application,jar). But I don't know how to handle the 2 jakarta .jar files with my JApplet??
I Tried to append the 2 jakarta .jar files to the Application,jar with the following code:
jar cvf Application.jar 1.class 2.class�. commons-net-1.4.1.jar jakarta-oro-2.0.8.jar
But with the same result / Exception (I have signed the Jar file!)
Can anyone help me

Hi i have a question with your application can you down- or upload more files at the same time? Because i'm having problems with my ftp application.
Here is the link with my problem maybe you can help me. I will be very pleased when you can help me.
http://forum.java.sun.com/thread.jspa?threadID=5162042&tstart=0
Thx
Satanduvel

How do I print to a postscript file with InDesign CS6 without both extensions, .indd.ps?

How do I print to a postscript file without an .indd extension in InDesign CS6? I choose Print, choose a print preset from my print shop and Save. The first time I tried it was blank (the Hide Extension was checked), so I tried to save and got a dialog box that said it cannot be saved as an .indd file (duh), to choose both or .ps. I chose .ps and it was fine, but every time I postscripted it gave me this dialog box until I unchecked Hide Extension. After I did that, every time I postscript it automatically saves both extensions. Not a big deal but it is annoying. I just want it to end with .ps like it used to. Any ideas on how to fix this?
Thanks!!

I have no idea but I am incredibly curious...why are you doing this?
Printing to postscript is a completely archaic workflow. Export to PDF
instead.
Bob
TKnudt <mailto:[email protected]>
Tuesday, January 15, 2013 6:12 PM
>
How do I print to a postscript file with InDesign CS6 without
both extensions, .indd.ps?
created by TKnudt <http://forums.adobe.com/people/TKnudt> in
/InDesign/ - View the full discussion
<http://forums.adobe.com/message/4996731#4996731

How can I Create a Client Configuration File for RemoteApp and Desktop Connection with Server 2012?

I have a working RDS RemoteApp site and looking to test out the feature in Windows 7 Control Panel\All Control Panel Items\RemoteApp and Desktop Connections
I came across this link: Create a Client Configuration File for RemoteApp and Desktop Connection and I believe this is what I need to do first, but these instructions are for
Server 2008, and I'm running 2012.
Any suggestions or tips on how I can begin testing this with Server 2012?

Hi,
You can manually enter the path to the 2012 feed and it will connect and download the RemoteApps and Desktop connections.
If you need a sample .wcx file I have posted one here a couple of times. If you want I will look for it and post a link.
-TP
I tried adding my URL's below, these are sample links that work for me right now for when I log into the web page, but neither of these work. And I'm not sure what I would need to do with or how to create a .wcx file.
When I type in my URL of: https://connect.mydomain.org/RDWeb, I get redirected to:
https://connect.mydomain.org/RDWeb/Pages/en-US/login.aspx?ReturnUrl=/RDWeb/Pages/en-US/Default.aspx

How can I run a labview executable file inside a VI

How can i add and run a labview executable file inside the vi and grab the output of the executable file to be used in the vi?
mytestautomation.com
...unleashed the power, explore and share ideas on power supply testing
nissanskyline.org
...your alternative nissan skyline information site

Hi cmdrb,
to run an executable you use SystemExec function.
To get the output of your (LabVIEW-made) executable you need to program some data transfer means: you may use network functions or file functions. In both cases your "LabVIEW executable" needs to provide that options…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to control framerate in f4v/flv files in a Build / Flash process?

I am quite new to Encore and would kindly ask for an advice.
I am trying to build Flash material from projects, to be played from local PC, not necessary to be used as internet stream. In the final material I just run "index.html" and it plays in my local browser, say Google Chrome. I need that the generated f4v / flv video clips to be rendered in high quality (usually 1280x720 progressive) with framerates as high as 30 fps or 60 fps. Suppose I load in Encore CS5 as asset an AVC mp4 clip rendered with 60fps. I select preset "1280x720 Widescreen High Quality". When executing "Build / Flash..." Encore produces a flv / f4v file with 25 fps. I cannot find where to control this aspect, I would like to endup with a f4v / flv clip with same framerate as the asset, in this case 60fps. Or at least 30fps. Any idea where to control this? I do not find any controls in Encore regarding this setting. Encore simply outputs 25fps flv clips, and sometime 15fps clips (I could not find out why 15fps...). Is there a way to force Encore to output flv clips with same framerate as the original asset?
Thanks in advance!

Thank you, Stan, for looking at this problem.
Yes indeed, Flash output in Encore is limited in many ways. I have done some experimenting now. It seemes I have found a nice application for Flash, but this application was not forseen by the developers of Encore, thus it is only poorly implemented. Unfortunately. Let me explain.
I produce multimedia material (video clips with film footage, still pictures & some effects) to be watched on PC with large screens or on PC & projector. Thus I need HD resolutions. At large resolution effects may sometimes not be perceived to run smoothly unless the video clips are rendered with high framerates. A trivial example would be rolling vertical credits at end of a video clip. When the clip is rendered with 25fps or lower you need to make the credits roll to run very slowly, otherwise the rolling down looks not smooth. Smoothiness gets better with material rendered at 29,97fps or 59,94 fps. I expected Encore would keep the framerate of the original asset when transcoding to Flash f4v / flv. This does not happen. I input assets (carefully observing the accepted input formats you mentioned) with high framerate, whereas Encore produced 25fps f4v files out of them. Unfortunately DVD formats have too low resolution for my intend and BR disks are not very popular where I live. I discovered that delivering material in Flash, to be played as an off-line website from local PC in the default browser - this would be a very nice solution. Unless Encore would perform better for this job. Probably it was simply not designed for this.
My first surprise was that I ended with 25fps f4v material. Trying to change this in Project Settings was not possible. Project was started in PAL and this option was now greyed out. Ok, I started a new project from the scratch as NTSC material, now at least the generated f4v files feature 29,97 fps instead of 25 fps, which would be acceptable. Unless...
The Flash transcoding machine of Encore drastically lowers bitrate for the generated f4v / flv files. I believe somewhere near 4Mbps (but may vary, I have not tested thoroughly). This can be ok for 360p material or lower resolution, or for watching video on youtube, but for HD resolution the effects look very bad and they do not run smooth at such low bitrate. I also noticed there is a problem with the Flash Player. The same generated (poor) f4v palyed in VLC or WMP looks much better than when played with Adobe Flash Player. Not to speak about difference between playing the original asset at 59,94fps with VLC versus playing the generated f4v (25fps) with Adobe Flash Player - here the difference is enormous!
It seemes I had some unrealistic expectations from Encore. I realy like the menus one can design with it, I like the possibility to build the project as Flash, but the results are quite poor. I need to look for an alternative solution.
When issuing the first post I just hoped I was doing something wrong...

SSIS - How to run command line to copy files with User Variables within a Execute Process Task

Hello,
I'm am having syntax issues within the Arguments when trying to copy a file with cmd.exe using User Variables.
It works when I hard code the arguments : /c copy /b "\\folder1\file.txt" "\\folder2\file.txt"
However, it's failing when I try using User Variables to replace the directory and file.
User::FILES = \\folder1\file.txt
User::FILE_NAME = file.txt
"/c copy /b + @[User::FILES] + \" \\\\folder2\\" + @[User::FILE_NAME]"
Does anybody know what's wrong with my syntax?
Thanks!

Hi SSISBeginner,
Assuming the source file is "C:\Temp\Source\file.txt", the destination folder is "C:\Temp\Destination", the expression of FILES variable is "C:\Temp\Source\file.txt", and the expression of FILE_NAME variable is file.txt. Then, we can use the following
expression for the Argument property of the Execute Process Task:
"/C COPY /B " + @[User::FILES] + " C:\\Temp\\Destination\\" + @[User::FILE_NAME]
Note: Pay attention to the spaces in the double quotes in the expression.
Regards,
Mike Yin
TechNet Community Support

How to create and use library JAR files with command-line tools?

Development Tools -> General Questions:
I am trying to figure out how to put utility classes into JAR files and then compile and run applications against those JAR files using the command-line javac, jar, and java tools. I am using jdk1.7.0_17 on Debian GNU/Linux 6.0.7.
I have posted a simple example with one utility class, one console application class, and a Makefile:
http://holgerdanske.com/users/dpchrist/java/examples/jar-20130520-2134.tar.gz
Here is a console session:
2013-05-20 21:39:01 dpchrist@desktop ~/sandbox/java/jar
$ cat src/com/example/util/Hello.java
package com.example.util;
public class Hello {
    public static void hello(String arg) {
     System.out.println("hello, " + arg);
2013-05-20 21:39:12 dpchrist@desktop ~/sandbox/java/jar
$ cat src/com/example/hello/HelloConsole.java
package com.example.hello;
import static com.example.util.Hello.hello;
public class HelloConsole {
    public static void main(String [] args) {
     hello("world!");
2013-05-20 21:39:21 dpchrist@desktop ~/sandbox/java/jar
$ make
rm -f hello
find . -name '*.class' -delete
javac src/com/example/util/Hello.java
javac -cp src src/com/example/hello/HelloConsole.java
echo "java -cp src com.example.hello.HelloConsole" > hello
chmod +x hello
2013-05-20 21:39:28 dpchrist@desktop ~/sandbox/java/jar
$ ./hello
hello, world!I believe I am looking for:
1. Command-line invocation of "jar" to put the utility class bytecode file (Hello.class) into a JAR?
2. Command-line invocation of "javac" to compile the application (HelloConsole.java) against the JAR file?
3. Command-line invocation of "java" to run the application (HelloConsole.class) against the JAR file?
I already know how t compile the utility class file.
Any suggestions?
TIA,
David

I finally figured it out:
1. All name spaces must match -- identifiers, packages, file system, JAR contents, etc..
2. Tools must be invoked from specific working directories with specific option arguments, all according to the project name space.
My key discovery was that if the code says
import com.example.util.Hello;then the JAR must contain
com/example/util/Hello.classand I must invoke the compiler and interpreter with an -classpath argument that is the full path to the JAR file
-classpath ext/com/example/util.jarThe code is here:
http://holgerdanske.com/users/dpchrist/java/examples/jar-20130525-1301.tar.gz
Here is a console session that demonstrates building and running the code two ways:
1. Compiling the utility class into bytecode, compiling the application class against the utility bytecode, and running the application bytecode against the utility bytecode.
2. Putting the (previously compiled) utility bytecode into a JAR and running the application bytecode against the JAR. (Note that recompiling the application against the JAR was unnecessary.)
(If you don't know Make, understand that the working directory is reset to the initial working directory prior to each and every command issued by Make):
2013-05-25 14:02:47 dpchrist@desktop ~/sandbox/java/jar
$ cat apps/com/example/hello/Console.java
package com.example.hello;
import com.example.util.Hello;
public class Console {
    public static void main(String [] args) {
     Hello.hello("world!");
2013-05-25 14:02:55 dpchrist@desktop ~/sandbox/java/jar
$ cat libs/com/example/util/Hello.java
package com.example.util;
public class Hello {
    public static void hello(String arg) {
     System.out.println("hello, " + arg);
2013-05-25 14:03:03 dpchrist@desktop ~/sandbox/java/jar
$ make
rm -rf bin ext obj
mkdir obj
cd libs; javac -d ../obj com/example/util/Hello.java
mkdir bin
cd apps; javac -d ../bin -cp ../obj com/example/hello/Console.java
cd bin; java -cp .:../obj com.example.hello.Console
hello, world!
mkdir -p ext/com/example
cd obj; jar cvf ../ext/com/example/util.jar com/example/util/Hello.class
added manifest
adding: com/example/util/Hello.class(in = 566) (out= 357)(deflated 36%)
cd bin; java -cp .:../ext/com/example/util.jar com.example.hello.Console
hello, world!
2013-05-25 14:03:11 dpchrist@desktop ~/sandbox/java/jar
$ tree -I CVS .
|-- Makefile
|-- apps
|   `-- com
|       `-- example
|           `-- hello
|               `-- Console.java
|-- bin
|   `-- com
|       `-- example
|           `-- hello
|               `-- Console.class
|-- ext
|   `-- com
|       `-- example
|           `-- util.jar
|-- libs
|   `-- com
|       `-- example
|           `-- util
|               `-- Hello.java
`-- obj
    `-- com
        `-- example
            `-- util
                `-- Hello.class
19 directories, 6 filesHTH,
David

How to create Web Service Client from wsdl with digital signature?

Please, help me to create Web Service Client from wsdl with digital signature. I know create Web Service client from wsdl file and I know how to add digital signature to XML with jwsdp, but I don't know how to do it together.
Thanks.

I'm handling security wit JAX-WS handler. So I insert "manually" ws-security tag and I encrypt (and sign) message parts.
On client side, all works fine, but on server side I obtain:
---Server Inbound SOAP message---|#]
Decrypting message and rebuilding Valuees... |#]
Starting decrypt|#]
. dectypted.!
--found following string: <ns1:addiziona><num1>80</num1><num2>22222</num2></ns1:addiziona>|#]
...MESSAGE Restored.|#]
<?xml version="1.0" ?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:ns1="http://calculator.me.org/" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd"><soapenv:Body><ns1:addiziona><num1>80</num1><num2>22222</num2></ns1:addiziona></soapenv:Body></soapenv:Envelope>|#]
Error in decoding SOAP Message
Error in decoding SOAP Message
        at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.toInternalMessage(SOAPXMLDecoder.java:89)
        at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.toMessageInfo(SOAPMessageDispatcher.java:187)
        at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher$SoapInvoker.invoke(SOAPMessageDispatcher.java:571)
        at com.sun.xml.ws.protocol.soap.server.SOAPMessageDispatcher.receive(SOAPMessageDispatcher.java:145)
        at com.sun.xml.ws.server.Tie.handle(Tie.java:88)
        at com.sun.enterprise.webservice.Ejb3MessageDispatcher.handlePost(Ejb3MessageDispatcher.java:160)
        at com.sun.enterprise.webservice.Ejb3MessageDispatcher.invoke(Ejb3MessageDispatcher.java:89)
        at com.sun.enterprise.webservice.EjbWebServiceServlet.dispatchToEjbEndpoint(EjbWebServiceServlet.java:178)
        at com.sun.enterprise.webservice.EjbWebServiceServlet.service(EjbWebServiceServlet.java:109)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.enterprise.web.AdHocContextValve.invoke(AdHocContextValve.java:100)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
        at com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:71)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:182)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
        at com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:137)
        at org.apache.catalina.core.StandardPipeline.doInvoke(StandardPipeline.java:566)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:536)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:939)
        at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
        at com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
        at com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
        at com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
        at com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
Caused by: javax.xml.ws.soap.SOAPFaultException: Cannot find the dispatch method
        at com.sun.xml.ws.encoding.soap.SOAPDecoder.raiseFault(SOAPDecoder.java:674)
        at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.decodeDispatchMethod(SOAPXMLDecoder.java:152)
        at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeBodyContent(SOAPDecoder.java:337)
        at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeBody(SOAPDecoder.java:327)
        at com.sun.xml.ws.encoding.soap.SOAPDecoder.decodeEnvelope(SOAPDecoder.java:250)
        at com.sun.xml.ws.encoding.soap.server.SOAPXMLDecoder.toInternalMessage(SOAPXMLDecoder.java:81)
        ... 29 more
|#]
--->handleFault O_o<---|#]If you have any idea for solving my problem, then I can post my simple example :(
Bye!

How to build a tuxedo client execute file with C++Builder?

Similar Messages

Maybe you are looking for