How To(?): build Simulated Networks (iPad) [Cisco Devices, etc.]

Good afternoon!
Thank you for clicking on this thread. Here's a quick synopsis:
-I work in IT
-I have an iPad
-I want to be able to build / play with simulated networks (like I would in 'GNS3') on said iPad
-I need it to be accessible and usable while not connected to a real-world network
I have been searching for quite a while, and have come up with nothing. Any and all assistance will be greatly appreciated!
Thanks in advance!
-James

If there is a MIB for it, most SNMP Capable Management servers can poll them.
This can be such as FHRP states, Routing Peers, ASA Failover status, Seriel numbers for inventory purposes.
The potential is almost endless, it just depends what you should monitor to ensure you are in the know when your network hiccups.
Here is a link to the IOS MIB Viewre    
http://tools.cisco.com/ITDIT/MIBS/MainServlet
CCNP, CCIP, CCDP, CCNA: Security/Wireless
Blog: http://ccie-or-null.net/

Similar Messages

  • How to find useful MIBs for Cisco Devices?

    Hi,
    I am setting up a new Monitoring System (CA Netvoyant). It has some default Cisco monitoring capabilities ( I believe these are soem standard MIBs).  I am wondering how can I add more useful Cisco MIBs for the devices I have in my network. There are thousands of MIBs and it looks like it is not easy at all to find the useful ones.
    For example the MIBs that can give you Emergency and up to warning level information, cpu, memory, interface errors, module failures (in case of Cat 6500), FWSM, BGP, VPN tunnel status notifications. Is there a list of useful MIBs for each device type, like Cat 6500, ASA5540, Cat 3750-E etc depending on IOS Image?
    Any help in setting up the SNMP monitoring system would be really helpful.
    Thanks

    If there is a MIB for it, most SNMP Capable Management servers can poll them.
    This can be such as FHRP states, Routing Peers, ASA Failover status, Seriel numbers for inventory purposes.
    The potential is almost endless, it just depends what you should monitor to ensure you are in the know when your network hiccups.
    Here is a link to the IOS MIB Viewre    
    http://tools.cisco.com/ITDIT/MIBS/MainServlet
    CCNP, CCIP, CCDP, CCNA: Security/Wireless
    Blog: http://ccie-or-null.net/

  • How to setup my network? Several Devices

    Hello I'm trying to figure out the most efficient way to setup my network. I have both N enabled devices (mac pro, macbook, apple tv) as well as G only devices (PS3, vonage phone, dell computer). I want to use my airport extreme to work in N -only mode at 5GHz and my old Linksys WRT54G to work with the older G only devices.
    What is the most efficient way of doing this?
    Will I lose speed/range be setting the A.Extreme on b/g compatible mode at 2.4GHZ?
    Can I connect my airport extreme to my cable modem and the linksys to one of the ports of the airport extreme?

    Will I lose any speed by connecting my airport extreme in N mode to a slower wrt54g? Is there any difference if I do it the other way around (the wrt54g to the airport extreme?) Can I do that?
    Since you would be connected them via Ethernet the wireless bandwidth of one won't affect the wireless bandwidth of the other.
    Also if I use the mixed mode (b/g compatible 2.4Ghz mode, will I lose speed?
    If any 802.11b/g clients use the network, yes the 802.11n clients will suffer.

  • How do you add the ipad device to your itunes account? Please!!

    How do you add the ipad 2 device to your itunes account

    There is no need to add the iPad, just sign into your iTunes account when you need to.

  • How do I add an ipad to my itunes account which was previously associated with another account and user?

    how do I add an ipad to devices in my itunes account which was previously associated with another account?

    Just sign into your own ID in Settings>iTunes & App Store. Sign out of the old ID and sign into your ID. I get the feeling though, that there is more to what you are trying to do or want to do and I'm not understanding or you are not explaining completely.
    If this is a previously owned iPad, it should have been erased before you got possession of it.

  • Building a network with MAC and windows computers.

    Hi.
    Please advice how to build a network where the different computers can interact and be seen.

    Since your question is extremely broad and lacking in detail...
    In simple terms, get a router and connect the computers to the router. Enable file sharing on the computers you want to be seen by the others.

  • I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

    I have one apple ID for both my Iphone 4S and Ipad. My Ipad was stolen from me and when I checked the iCloud, it can only locate the Iphone 4S. How can I locate the Ipad device?

    Welcome to the Apple Community.
    You can only locate your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • Our home network has multiple devices connected by iCloud. Having problem with Calendar. On one iMac, all the events are duplicated. How can I correct that problem? Under the Calendar accounts, I had my Apple id listed and also just iCloud.

    Our home network has multiple devices connected by iCloud: 2 iMacs, 2 iPhone 4s, 1 MacPro Laptop, and 1 iPad 2.  When using Calendar, all the events were
    duplicated on my husbands iMac.  On his computer, under Calendar accounts, I had included iCloud and also my iCloud ID.  I thought that because I had two accounts listed that were connected to iCloud, that might be the cause of the duplication.  When I deleted ithe calendars from one of the accounts, it resulted
    in deleting all of the events on all of our network devices!
    I have since entered some new events into Calendar from my iMac and from my iPhone.  These appear correctly on all devices except my husband's iMac where they are again all duplicated.
    I have two questions: 1)  How can I eliminate the duplicated events on my husband's computer and 2) How do I retrieve the old wiped out Calendar events from
    Time Capsule.  I don't know how to find Calendar in the Time Capsule.  If I find the Calendar information in Time Capsule, how do I transfer it to my current Calendars?
    I was obtaining phone help from one of the Apple techs at Apple Support, but our call was disconnected part way through.  Didn't know how to reconnect with the tech.
    Thanks for any help.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...

    Hello! I have in my home 2 iMac, 2 iPad, 2 iPhone, and 1 air base extreme. I don't succeed to connect more than one divice from similar type. I tried everything what I knew. I build another network, etc...
    So only one imac, only one ipad..and so on simultain.
    More over, all the divices are conect through wifi to air base but are not receiveing internet as i told above.
    I need to disconnect one device to have internet on the second one from the same type!
    Could somebody help me?
    Many Thnaks,
    dan

    If your network configuration is:
    Cable modem > (Ethernet cable) > [WAN] AEBS > (wireless) > Macs, then
    AirPort Extreme Base Station Setup (AEBS) w/High-Speed Cable Modem
    Modem/Router Power ReCycling
    - Power-off the Cable modem, AEBS, & computer(s). (If possible, leave the modem off overnight.)
    - Power-on the Cable modem; Wait at least 30 minutes.
    - Power-on the AEBS; Wait at least 5 minutes.
    - Power-on the computer(s)
    Perform a "hard" reset of the AEBS.
    - (ref: http://docs.info.apple.com/article.html?artnum=107451)
    Setup the AEBS
    With the network components powered down, set up the AEBS, using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the LAN port of the AEBS, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - AirPort Network Name: <whatever you wish or use the default>
    - Create a closed network (unchecked)
    - Wireless Security: Not enabled
    - Channel: Automatic
    - Mode: 802.11b/g Compatible
    Internet tab
    - Connect Using: Ethernet
    - Configure: Using DHCP
    - WAN Ethernet Port: Automatic
    Network tab
    - Distribute IP addresses (checked)
    - Share a single IP address (using DHCP & NAT) (enabled)
    Once you verified that you can get Internet access for all of your computers, you should secure your wireless network. To do so, I suggest that you make these changes:
    AirPort tab (optional)
    - Create a closed network (checked)
    Change Wireless Security
    - Wireless Security: WPA Personal
    Base Station Options - WAN Ethernet Port
    - Enable SNMP Access (unchecked)
    - Enable Remote Configuration (unchecked)
    - Enable Remote Printer Access (unchecked)
    Wireless Options
    - Transmitter Power: 10%
    Access Control tab (optional)
    - + <add the computer(s) that will access this wireless network>

  • I have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

    i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

    i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
    then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
    hence why i have 3 now
    hard to believe you cannot combine into one
    oh well, i will just make them all accessible for all 3
    thanks

  • My husband and I have separate iTunes accounts and multiple devices (iPads, iPhones, iPods etc) how do we share our music and apps between our devices if we have different iTunes accounts.

    Help! My husband and I have multiple devices (iPad, iPhone, iPod ) that we we have linked to individual iTunes accounts ie he has his account with iPad, iPhone, PC and iPod linked/sync and I have my account with iPhone, iPad, iPad mini, PC etc.. How do we share our music and apps across/between our accounts?

    It probably means that only one of you can use iCloud or at least sync calender/contacts with it. I would guess that you could manually manage the other phone as you have before.

  • HT202213 Our house has a computer, 3 ipods, 2 iPhones, 2 iPad Mini's and 1 family iPad = 9 devices.  I one have one Apple account currently.  How do I move exisitng users under my account to their own Apple account

    Our house has a computer, 3 ipods, 2 iPhones, 2 iPad Mini's and 1 family iPad = 9 devices.  I one have one Apple account currently.  How do I move exisitng users under my account to their own Apple account

    Have a look here...
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

  • I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC.  I can however see my iPod touch under devices and sync it.  How can I get my iPad to show under devices and sync as well?

    I have the newest version of the iPad and can not see it under devices in my iTunes account on my PC.  I can however see my iPod touch under devices and sync it.  How can I get my iPad to show under devices and sync as well?  I have also tried may suggestions on the apple support site and none have worked.  Any suggestions are welcome.

    You need iTunes version 11+.
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
     Cheers, Tom

  • How do I get my iPad and IPhone synced where if I delete an email off one it is deleted off the other device?

    How do I get my iPad and IPhone synced where if I delete an email off one it is deleted off the other device? I can get all the Apps and music from one to the other but why won't the emails I delete off one not delete off the other? Is there anyway where I can make this happen?

    As James says, make sure that you are using the IMAP servers for your email. You will need to check the help pages for your email provider to get the correct settings in all your devices. POP really doesn't fit the needs of todays mutiple access, always on internet, so you are better off moving to IMAP.

  • How can I sync my iPad to a computer after syncing it to the iCloud? I have the option of setting it up new, or restoring to a sync from many months ago. I dont want to lose any apps but I would like to back up on computer. No auto sync like other devices

    How can I sync my iPad to a computer after syncing it to the iCloud? I have the option of setting it up new, or restoring to a sync from many months ago. I dont want to lose any apps but I would like to back up on computer. No auto sync like other devices.

    Plug it into your computer. Tell it to sync with "this computer" instead of iCloud. You shouldn't have to remove any apps. Otherwise, you can save the app data by using i-FunBox ( http://www.i-funbox.com/ ) just go to the "devices" tab and select 'user applications' and select all of your apps and tell iFunBox to "copy to pc" you're done! You have them all backed up.

Maybe you are looking for

  • Wireless transfer of photos from camera to Macbook Pro (help)

    Im sorry if this might not be the correct place to ask about it but Im going to give it a try. I know this can be done because professionals are doing it across the globe already. I just purchased a Canon 50D along with a WFT-E3A wireless transmitter

  • Movie rental and travel

    OK so many websites and music sites do not work when I travel overseas. I want to rent movies via iTunes to watch on my laptop, but want to make sure that having a 'non-US' IP address won't prevent me from watching rented videos. Does my laptop have

  • Video exports about half and then turns white

    Hey, Trying to figure out what is up with my export. Using h264 (HMC150) and mp4 (EX3) trying to export a 1080 file that is about 13 minutes long. The video exports but about halfway through it turns to white, the audio continues playing. I exported

  • Business Process Documentation

    Dear All Business Process Documentation I just want to know foloowing thing sabout Business Process Documentation. do yuo know where there any documents about Business Process Documentation and system log ? Edited by: Koji Watanabe on Feb 16, 2012 1:

  • Last PO net price will capture in PR

    Dear all, i want that when i create PR the valuation price will come automaically from the last po net price. for this any configuration i have to do or any user exits are there for this requirement.. please help...i have no idea regarding this.