How to call a trigger when a transaction is rolled back

Situation:
Using a trigger to propogate changes from an Oracle8 DB to a remote non-Oracle database ( it may not even be a rational database etc.). The trigger is connecting to a external procedure to send the change to the remote "database" - all updates are to be replicated - inserts, deletes etc.
Problem:
If an update transaction is aborted in the Oracle database, after the trigger has been called but before the transaction is committed. The transaction is rolled back successfully in the Oracle database, but nothing happens to the remote "database". Therefore there is now an data inconsistency !
How can I ensure that the transaction rollback occurs in the remote database as well ? There is no transaction monitor between the two databases. Can I get the trigger to be called again ?
Any ideas, suggestions ??
Many thanks in advance,
ismon

Hi;
You may use costum trigger which can be run after AP_CHECKS_ALL table has record
Regard
Helios

Similar Messages

How to send payload to error queue if the transaction is rolled back.

Hey,
If we get a error then the transaction needs to be rolled back. I need to send the input payload to a errored Queue if the transaction is roled back (not to the actual Queue from which input payload is consumed). Can any body tell how to do it.
Thanks,
Rakes.

Hi Rakes,
When a transaction is rolled back, the message (input payload ) will roll back to the "exception queue" of the initial queue. You may think of it as an error bucket inside the JMS queue. AIA provides manual scripts to resumbit this message once error is fixed.
If you are using AQ, you could specify your own queue as exception queue. You could have a custom SQL solution to move messages from initial exception queue to your custom queue.
Regards
Rohit

How workflow is getting trigger when you click order

Hello Friends,
I would like to know how bus2121 Saved event trigger when click Order button in Web?
thanks,
John.

Hi John,
When a user orders a shopping cart. This triggers the SAVED event, which starts the approval workflow. The system analyzes the start conditions in Customizing.
There is information here on which workflow the system should start under which conditions. Each workflow represents an approval process (single-level or multi-level) or is defined in such a way that no approval is necessary.
If approval is required, the system goes through the corresponding approval procedure. The user can meanwhile change or delete the shopping cart. The shopping cart can take on the following statuses:
Not accepted
Approved
Deleted
Changed
You can further process a request via a subworkflow.
If approval is not required, the system sets the status to Approved and immediately starts the subworkflow.
Users receive a work item. Before the shopping cart can be further processed, they have to accept the rejection of items (or not, as the case may be).
After the shopping cart is released, the system calls the spooler. This transfers the shopping cart to the backend system or creates a purchase order locally in the Enterprise Buyer system.
This is how a workflow triggers.
With regards,
mahesh

How to eliminate extra white when hovering over with a back ground color?

I just finished my menu and I notice that the hovering color is not hiding all the white. Does someone know how to eliminate extra white when hovering over with a back ground color?
http://www.tammyfarringtoncreative.com/test/index.html
Thanks!

You have heights on the ul, li as 36px and a line-height of the text of 35px so they are not matching up. Personally speaking I would normally recommend using padding on the links to create the height and not set the height on the ul or li elements.

Transaction marked rolled back

Hi
I'm have a FacadeBean F1 which uses Required transaction attribute which calls another Session Bean S1 which has default transaction attribute(Supports).This uses customized UserTransaction.
In bean S1 this is the sequence of steps
Method{
insert into db
try{
userTransactionBegin.
do some process
userTransaction commit.
}catch{
userTransaction rollback
}finally{
update
Now when a exception is thrown in the process section,The user transaction is rolled back but i get the following exception in the finally block when trying to update some table in DB.
Transaction BEA1-0EB167DB585FC3E8BBFA not active anymore. tx status = Marked rollback.
I believe this happens as the rollback in userTransaction would also cause the transaction to get inactivated and the request to get the fresh DB connection is thrown back with this exception.
Can someone please suggest me what i should do to resolve this issue.
Rgds
Ramraj

Ramraj Chauhan wrote:
Hi
I'm have a FacadeBean F1 which uses Required transaction attribute which calls another Session Bean S1 which has default transaction attribute(Supports).This uses customized UserTransaction.
In bean S1 this is the sequence of steps
Method{
insert into db
try{
userTransactionBegin.
do some process
userTransaction commit.
}catch{
userTransaction rollback
}finally{
update
Now when a exception is thrown in the process section,The user transaction is rolled back but i get the following exception in the finally block when trying to update some table in DB.
Transaction BEA1-0EB167DB585FC3E8BBFA not active anymore. tx status = Marked rollback.
I believe this happens as the rollback in userTransaction would also cause the transaction to get inactivated and the request to get the fresh DB connection is thrown back with this exception.
Can someone please suggest me what i should do to resolve this issue.
Rgds
RamrajHi. You are doing your own tx in the S1 bean, so that beand should be described as
a no-TX (doesn't support tx) bean. That way WLS won't try to involve it in any
calling transaction or control what you do, which is totally independent. You
can't have 'nested' transactions.
Joe

ORA-02050 transaction string rolled back, some remote DBs may be in-doubt

Hi...guys...How ru all...
I got follwoing error...and I searched in google but there is not clear information..plz help me ...
Error Message: ORA-02050 transaction string rolled back, some remote DBs may be in-doubt
Error Cause:
Network or remote failure during a two-phase commit.
Action:
Notify operations; remote databases will automatically re-sync when the failure is repaired.
SQL>SELECT local_tran_id, global_tran_id, state, mixed, host, commit#
FROM dba_2pc_pending
LOCAL_TRAN_ID GLOBAL_TRAN_ID STATE MIX HOST COMMIT#
5.44.98254 JICRACDB.e1ab4089.5.44.98254 collecti no JICN\ROOM9 1132915640
ng 7-ITC
SQL> SELECT local_tran_id, in_out, database, dbuser_owner, interface
2 FROM dba_2pc_neighbors
3 /
LOCAL_TRAN_ID IN_OUT DATABASE DBUSER_OWNER INT
5.44.98254 in JIC N
5.44.98254 out RC_DBLINK JIC N
SQL> ;
1 select state, tran_comment, advice from dba_2pc_pending
2* where local_tran_id ='5.44.98254'
SQL> /
STATE TRAN_COMMENT ADVICE
collecting
so how can I delete distributed transaction..plz provide me any Metalink Docids.

See if following MOS note helps.
Manually Resolving In-Doubt Transactions: Different Scenarios (Doc ID 126069.1)

ORA-25402: transaction must roll back

I found this problem.ORA-25402: transaction must roll back
Please introduce , how resolve problem?
what view ? I'll able check for this problem.

If you had a network problem it is unlikely that the client would still be connected and able to issue a rollback. I have seen this message but I cannot remember what the situation is when it occurs. What Oracle wants is for the client to issue an explicit rollback statement.
There is a bug that produces this error unfortunately the OP did not include their Oracle version. The bug could be in all versions from 8 - 9.2.0.3 but is only confirmed to be in 9.2.0.3 where after Transaction Failover a commit or rollback incorrectly produces this error. According to the note a Select should produce this error. This would need to be a RAC system that uses transaction failover for this to apply: Note:2652886.8 Also TAF problem: Note:2652845.8
But it seems to me you can get this error on a distributed transaction. Oracle wants the client to issue an explicit rollback so that all parties to the distributed transaction rollback. If the application terminates due to the error then RECO will rollback the transaction. If the application issues the rollback it can then continue with additional (or retry) distributed queries.
HTH -- Mark D Powell --

Transaction not rolled back

 Configuration:
 - WLS 5.10 SP8
 - Oracle 8.1.6
 - TX DataSource connected to a Connection pool of oracle JDBC connections
 I have a stateless session with a method register() that performs three insert operations in the oracle database via a connection fetched from tha TX Datasource object.
 The method register has been marked with the transaction attribute required.
 I recieve a SQLException from Oracle when trying to insert in one of the three tables and want to rollback the transaction.
 I have tried to use setRollBackOnly(), throw an EJB exception
 and i get the following message from WLS:
 java.sql.SQLException: ORA-00001: unique constraint (ISACOWN.UK_ISIS_REFERENCE2) violated
 at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
 at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java, Compiled Code)
 at oracle.jdbc.oci8.OCIDBAccess.executeFetch(OCIDBAccess.java, Compiled Code)
 at oracle.jdbc.oci8.OCIDBAccess.parseExecuteFetch(OCIDBAccess.java:1235)
 at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java, Compiled Code)
 at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1232)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithBatch(OracleStatement.java:1353)
 at oracle.jdbc.driver.OracleStatement.doExecute(OracleStatement.java, Compiled Code)
 at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java, Compiled Code)
 at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java, Compiled Code)
 at weblogic.jdbc20.pool.PreparedStatement.executeUpdate(PreparedStatement.java:47)
 at weblogic.jdbc20.rmi.internal.PreparedStatementImpl.executeUpdate(PreparedStatementImpl.java:54)
 at weblogic.jdbc20.rmi.SerialPreparedStatement.executeUpdate(SerialPreparedStatement.java:55)
 at net.astrazeneca.cmi.data.Crud.execDML(Crud.java:283)
 at net.astrazeneca.cmi.data.dao.MolStructDAO.insertIsisRef(MolStructDAO.java:136)
 at net.astrazeneca.cmi.data.dao.MolStructDAO.insert(MolStructDAO.java, Compiled Code)
 at net.astrazeneca.cmi.data.dataservice.MolStructureDS.register(MolStructureDS.java, Compiled Code)
 at net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl.register(MolStructureDSEOImpl.java, Compiled Code)
 at net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl_WLSkel.invoke(MolStructureDSEOImpl_WLSkel.java, Compiled Code)
 at weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAdapter.java, Compiled Code)
 at weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandler.java, Compiled Code)
 at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java, Compiled Code)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
 ti jan 23 11:12:20 GMT+01:00 2001: <EJB JAR deployment F:\Projects\MolStructureDS\MolStructureDS.jar> Transaction: '980237619834_1326' rolled back
 due to EJB exception:
 javax.ejb.EJBException
 at net.astrazeneca.cmi.data.dataservice.MolStructureDS.register(MolStructureDS.java, Compiled Code)
 Anybody got an idea ? at net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl.register(MolStructureDSEOImpl.java, Compiled Code)
 at net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl_WLSkel.invoke(MolStructureDSEOImpl_WLSkel.java, Compiled Code)
 at weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAdapter.java, Compiled Code)
 at weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandler.java, Compiled Code)
 at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java, Compiled Code)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
 ti jan 23 11:12:20 GMT+01:00 2001:<E> <Adapter> Exception thrown by rmi server: [-3565031217135527434S157.96.215.53:[7001,7001,7002,7002,7001,-1]/466]
 javax.ejb.EJBException
 at net.astrazeneca.cmi.data.dataservice.MolStructureDS.register(MolStructureDS.java, Compiled Code)
 at net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl.register(MolStructureDSEOImpl.java, Compiled Code)
 at net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl_WLSkel.invoke(MolStructureDSEOImpl_WLSkel.java, Compiled Code)
 at weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAdapter.java, Compiled Code)
 at weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandler.java, Compiled Code)
 at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java, Compiled Code)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
 No matter what I have tried so far the two inserts that are OK are commited in Oracle. What I want is to make all three inserts in the transaction rolled back.
 Anybody got an idea ?


 Yes, all through the same connection and the connection is from a TX data source in
 WLS 5.1 with SP8
 But.... I do NOT fetch the connection inside the transaction..but I didn't think
 that was nescessery... is it ?
 When I tried this and checked the JDBC log the auto-commit was turned to off and
 everything worked smoothly.
 /Paul
 "Cameron Purdy" <[email protected]> wrote:
 >All through the same connection? And the connection is from a tx data
 >source? And auto-commit is off?
 >
 >If so, then someone is committing the transaction.
 >
 >Is this 5.1?
 >
 >--
 >Cameron Purdy
 >Tangosol, Inc.
 >http://www.tangosol.com
 >+1.617.623.5782
 >WebLogic Consulting Available
 >
 >
 >"Paul Eriksson" <[email protected]> wrote in message
 >news:[email protected]...
 >>
 >> I've already tried this but still... the tho first inserts are commited
 >and the third that causes the rollback of course is not.
 >>
 >> /P
 >>
 >> "Cameron Purdy" <[email protected]> wrote:
 >> >Don't set rollback only, just throw a runtime exception (like
 >EJBException).
 >> >
 >> >--
 >> >Cameron Purdy
 >> >Tangosol, Inc.
 >> >http://www.tangosol.com
 >> >+1.617.623.5782
 >> >WebLogic Consulting Available
 >> >
 >> >
 >> >"Paul Eriksson" <[email protected]> wrote in message
 >> >news:[email protected]...
 >> >>
 >> >> Configuration:
 >> >>
 >> >> - WLS 5.10 SP8
 >> >> - Oracle 8.1.6
 >> >> - TX DataSource connected to a Connection pool of oracle JDBC
 >connections
 >> >>
 >> >> I have a stateless session with a method register() that performs three
 >> >insert operations in the oracle database via a connection fetched from
 >tha
 >> >TX Datasource object.
 >> >>
 >> >> The method register has been marked with the transaction attribute
 >> >required.
 >> >>
 >> >> I recieve a SQLException from Oracle when trying to insert in one of
 >the
 >> >three tables and want to rollback the transaction.
 >> >>
 >> >>
 >> >> I have tried to use setRollBackOnly(), throw an EJB exception
 >> >> and i get the following message from WLS:
 >> >>
 >> >>
 >> >> java.sql.SQLException: ORA-00001: unique constraint
 >> >(ISACOWN.UK_ISIS_REFERENCE2) violated
 >> >>
 >> >> at
 >> >oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:114)
 >> >> at oracle.jdbc.oci8.OCIDBAccess.check_error(OCIDBAccess.java,
 >> >Compiled Code)
 >> >> at oracle.jdbc.oci8.OCIDBAccess.executeFetch(OCIDBAccess.java,
 >> >Compiled Code)
 >> >> at
 >> >oracle.jdbc.oci8.OCIDBAccess.parseExecuteFetch(OCIDBAccess.java:1235)
 >> >> at
 >> >oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.java,
 >> >Compiled Code)
 >> >> at
 >>
 >>oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.java:1232
 >)
 >> >> at
 >>
 >>oracle.jdbc.driver.OracleStatement.doExecuteWithBatch(OracleStatement.java:
 >1
 >> >353)
 >> >> at
 >> >oracle.jdbc.driver.OracleStatement.doExecute(OracleStatement.java,
 >Compiled
 >> >Code)
 >> >> at
 >>
 >>oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.jav
 >a
 >> >, Compiled Code)
 >> >> at
 >>
 >>oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStat
 >e
 >> >ment.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.jdbc20.pool.PreparedStatement.executeUpdate(PreparedStatement.java
 >:
 >> >47)
 >> >> at
 >>
 >>weblogic.jdbc20.rmi.internal.PreparedStatementImpl.executeUpdate(PreparedSt
 >a
 >> >tementImpl.java:54)
 >> >> at
 >>
 >>weblogic.jdbc20.rmi.SerialPreparedStatement.executeUpdate(SerialPreparedSta
 >t
 >> >ement.java:55)
 >> >> at net.astrazeneca.cmi.data.Crud.execDML(Crud.java:283)
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dao.MolStructDAO.insertIsisRef(MolStructDAO.java:1
 >3
 >> >6)
 >> >> at
 >> >net.astrazeneca.cmi.data.dao.MolStructDAO.insert(MolStructDAO.java,
 >Compiled
 >> >Code)
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDS.register(MolStructureDS
 >..
 >> >java, Compiled Code)
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl.register(MolStruc
 >t
 >> >ureDSEOImpl.java, Compiled Code)
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl_WLSkel.invoke(Mol
 >S
 >> >tructureDSEOImpl_WLSkel.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAd
 >a
 >> >pter.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandl
 >e
 >> >r.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java,
 >> >Compiled Code)
 >> >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,
 >Compiled
 >> >Code)
 >> >> ti jan 23 11:12:20 GMT+01:00 2001: <EJB JAR deployment
 >> >F:\Projects\MolStructureDS\MolStructureDS.jar> Transaction:
 >> >'980237619834_1326' rolled back
 >> >> due to EJB exception:
 >> >> javax.ejb.EJBException
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDS.register(MolStructureDS
 >..
 >> >java, Compiled Code)
 >> >>
 >> >> Anybody got an idea ? at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl.register(MolStruc
 >t
 >> >ureDSEOImpl.java, Compiled Code)
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl_WLSkel.invoke(Mol
 >S
 >> >tructureDSEOImpl_WLSkel.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAd
 >a
 >> >pter.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandl
 >e
 >> >r.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java,
 >> >Compiled Code)
 >> >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,
 >Compiled
 >> >Code)
 >> >>
 >> >> ti jan 23 11:12:20 GMT+01:00 2001:<E> <Adapter> Exception thrown by
 >rmi
 >> >server:
 >> >[-3565031217135527434S157.96.215.53:[7001,7001,7002,7002,7001,-1]/466]
 >> >>
 >> >> javax.ejb.EJBException
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDS.register(MolStructureDS
 >..
 >> >java, Compiled Code)
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl.register(MolStruc
 >t
 >> >ureDSEOImpl.java, Compiled Code)
 >> >> at
 >>
 >>net.astrazeneca.cmi.data.dataservice.MolStructureDSEOImpl_WLSkel.invoke(Mol
 >S
 >> >tructureDSEOImpl_WLSkel.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.extensions.BasicServerObjectAdapter.invoke(BasicServerObjectAd
 >a
 >> >pter.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.extensions.BasicRequestHandler.handleRequest(BasicRequestHandl
 >e
 >> >r.java, Compiled Code)
 >> >> at
 >>
 >>weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java,
 >> >Compiled Code)
 >> >> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java,
 >Compiled
 >> >Code)
 >> >>
 >> >>
 >> >>
 >> >> No matter what I have tried so far the two inserts that are OK are
 >> >commited in Oracle. What I want is to make all three inserts in the
 >> >transaction rolled back.
 >> >>
 >> >> Anybody got an idea ?
 >> >
 >> >
 >>
 >
 >

JTA transaction unexpectedly rolled back

I have a Spring Java web app deployed on OC4J 10.1.3.3 using Toplink as the container managed persistence. When my app is launched a named query is executed that uses JPQL to load up collections of objects. It is failing with the subject line exception.
org.springframework.transaction.UnexpectedRollbackException: JTA transaction unexpectedly rolled back (maybe due to a timeout); nested exception is javax.transaction.RollbackException: Timed out
If, however, I then modify the URL and force an action that will re-execute the same query, it works fine.
Any ideas on which configuration settings I should investigage/change to enable this to work the first time through?
I am not dealing with large collections here. At this point, there are 11 main objects that have children/parents. Re-execution of the query happens very fast.
Thank you!
Ginni

Hello,
It sounds like its not the query itself that is taking too long, but all the processing done before the query in the same transaction scope. The error is that the transaction is timing out, so you should start by checking when the transaction is started and if the timeout value needs to be increased to cover the time this process is taking, or if the transaction can be made smaller or broken up into smaller peices. Or, if the query is just returning data that isn't going to be modified, if a transaction is required at all.
Best Regards,
Chris

Set transaction use roll back

Hi all:
I have lot of packages with the statement set transaction use roll back segment RBS_BIG.I am working on upgrade project and using undo tablespaces.
Is there a quick way to grep the this statement from all the packages and remove off.Does the presence of this statement in packages of new database cause compilation errors ?
Thanks,
Ganesh

The set transaction use rollback segment <rbsegment> is ignored in 10g. In 9i databases this could cause errors when using automatic undo management. For your 9i databases you can suppress the errors by setting UNDO_SUPPRESS_ERRORS=true.

HT4859 How do I recover from Icloud - I want to "roll back" my phone to the 3rd of October

How do I recover from Icloud - I want to "roll back" my phone to the 3rd of October

If your device backs up to iCloud, and that would happen every day assuming "conditions" are right, then you probably only have the latest backup available for a restore. You won't have one taken October 3 available.
I say "latest backup available" because, although Apple mentions up to 3 backups are available for restore, most users report having only one when they try performing a restore. Certainly expecting going back 5 days would be outside the limits.

Set transaction use roll back segmet

Hi all:
I have lot of packages with the statement set transaction use roll back segment RBS_BIG.I am working on upgrade project and using undo tablespaces.
Is there a quick way to grep the this statement from all the packages and remove off.Does the presence of this statement in packages of new database cause compilation errors ?
Thanks,
Ganesh

Hi,
Set init.ora parameter as follows and restart database. All SET TRANSACTION USE ROLLBACK SEGMENT statements will have no effect and ignored.
UNDO_SUPPRESS_ERRORS=TRUE
You may use ALTER SYSTEM rather than restart db. If your database use spfile.ora, you have to execute:
ALTER SYSTEM SET UNDO_SUPPRESS_ERRORS=TRUE SCOPE=BOTH;
Best regards,
Dima

***How to call BSP App when custom button event fired from toolbar group***

Dear PCUI Experts,
   I have created one custom button for the transaction CRMD_BUS2000116.
And my urgnet requirement is , I need to call BSP application which is used to   take data from custom fields and stores into BP table.
How to call the BSP App. when i clicks on the button.
Please help me..
I will reward with great points.
Regards,
Stella.

Hi Purushothaman,
                             I have created a button in CRRM_ACCOUNT application.
Now i want to call a custom bsp application by clicking on that button.I have followed step given in this blog
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1646. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
But the event is not triggered.Do I have to create an iview for my bsp application?
How to do that?Plz help.
Regards,
Ruby.

How to call SP automatically when issue a select clause?

I have a dw to get data from sql select like:
select * from tab, proxytab where tab.id = proxytab.id ...
the proxy table is created based on a stored procedure result set.
When dw retrieve data, it will call sp automatically by proxy table. but there is a big performance problem. So I decided to replace proxy table with a physical table with same name to save the result set from sp.
As I don't want to change any code in powerbuilder. Question is: how to call sp to put the result data in the physical table when dw retrieve data?

What is the backend DBMS here?
You're using the phrase "proxy table", but it doesn't sound like that's what you might mean. A Proxy Table is like a "remote query" against a table in a different database. It allows you to do table joins when the two tables are stored in physically separate databases.
What you're describing sounds more like a "global temporary table", where some process (your stored procedure, for example) runs a bunch of complex queries, then inserts its result set into this temp table. The temp table looks and feels exactly like a real table, but the data is only available to the current connection, and the table and all its data is deleted when the connection is dropped.
Is that it? Because you can define the table as a GLOBAL TEMPORARY, and it's definition is available in the system catalog. You can write queries against them without having to define the table as a physical table...
Now - to your original question - how to call the stored procedure to populate the temp table before you execute the query against it? I'd use the RetrieveStart event of the datawindow that queries the temp table.
::retrieveStart
if (select count(*) from temp_table) > 0 then RETURN
EXECUTE stored_procedure arg1, arg2, arg3 using SQLCA;

How to call MSC2N in the QA11 transaction before saving the data

I need to call MSC2N in the QA11 transaction because i want the Next inspection date for the particular material, plant, and batch. but while iam in QA11 the batch is locked so it will not allow me to go to MSC2N. So to see Next inspection date i have to come out of QA11 and then go to MSC2N to get corresponding Next inspection date.
To avoid this i want that in QA11 i should call MSC2N. or how to unlock batch so that i can go to MSC2N while iam in QA11.......is it possible
Pls provide me suggestion.
<REMOVED BY MODERATOR>
Message was edited by:
Alvaro Tejada Galindo

Hi Hemant
Please use Function Module
VB_CHANGE_BATCH
and pass BYPASS_LOCK = 'X' and fill in all the other fields.
Please reward if found helpful
Thanks
Prasad

How to call a trigger when a transaction is rolled back

Similar Messages

Maybe you are looking for