How to call ABAP report in portal

Hi,
I have a ABAP report which is created and i want to display this in Portal . Any idea how i can do the same. Please, give me all the details in step-by-step.
Thanks & Regards,
Ashish Mehta

Hi,
   Try this:
1. Create a transaction iView in the portal.
2. Set the transaction to SE38.
3. Declare Application Parameters as:
    RS38M-FUNC_EDIT=X;RS38M-PROGRAMM=<name of the report>
4. Put this in the OK Code Field property: STRT.
5. Set the System property to the portal system that points to the back-end R/3 system.
6. Launch the iview.
Regards,
Satyajit.

Similar Messages

  • How to Intergrate ABAP reports to Portal

    Hi Experts,
    I want to put my ABAP reports to the Enterprise Portal.
    So how would i do that.
    Pls guide me.
    Regards,
    DS

    hi ,
    You would be having Tcode for your Abap reports.. right!!!
    Then just u hve to created Transaction iveiw in Portal..give Tcode of tht report... Bingo it will work...
    Regarding creating of Transaction iview u can refer [url]How to create R/3 Transaction Iviews in EP;url]  ur own thread.
    Regards
    Parth

  • How to trigger abap report from module pool

    hi,
    continuing with this link
    table control this is done (Module pool )
    there were two buttons (accept and delete )in the module pool..so when the user  clik 'accepts '  the records (from table control ) then it shud call abap report which will run in background..
    so how do we pass the values selected from table control to the abap report in one go.....as only one background job has to run..say if there are  10 entries then it shud take all the 10 entries and trigger the abap report where it will do the processing with the selected 10 records in the abap report.
    Thanks
    Mohan..

    Declare the parameters of the report as select options and call it using submit statement.
    link:[http://help.sap.com/abapdocu_70/en/ABAPSUBMIT_VIA_JOB.htm]

  • Calling ABAP report from BEx query

    Good day!
    I want to call ABAP report from BEx query by right-clicking on the field and using context menu. I know that transaction RSBBS is used (sender-receiver connecting), but I don't know how to transfare data to ABAP program
    In ABAP program I want to know at least data from those cell in BEx query, that was right-clicked.

    Depending on your requirement and environment, you have the following options:
    1. Use an info spoke and make selections as you would in a query.
    2. USe FM RS_VC_GET_QUERY_VIEW_DATA_FLAT to send the data to a file and your ABAP can read this file.
    Ravi Thothadri

  • How to call PDF Report with parameters in jdeveloper 10.1.3

    Hi all,
    how to call PDF Report with parameters in jdeveloper 10.1.3
    for example I have Report name is repdept.pdf with parameter as deptno
    and I want call this Report from JSP page ?
    thanks
    frank

    Hi all,
    how to call PDF Report with parameters in jdeveloper 10.1.3
    for example I have Report name is repdept.pdf with parameter as deptno
    and I want call this Report from JSP page ?
    thanks
    frank

  • How to call a Report 10g from a parameter form..?

    Hello,
    pls i wanna know the procedure of :
    How to call a Report 10g from a parameter form..?
    regards,
    Abdetu..

    hopes it work for you.
    procedure get_report is
    pl_id paramlist;
    p_year varchar2(4);
    param_name varchar2(10) :'param';
    begin
    pl_id := get_parameter_list(param_name);
    if not id_null(pl_id_)then
    destroy_parameter_list(pl_id);
    end if;
    pl_id := create_parameter_list(param_name);
    p_year := year -- assign the value.
    add_parameter(pl_id,'p_year',text_parameter,p_year);
    execute_report('report_name',pl_id);
    end;

  • How to link the reports to portal

    Hai Friends...
    I generated reports using discoverer plus and i viewed the reports using discoverer viewer . I am new to discoverer viewer.
    Any body done please give me steps for how to deploy the reports in discoverer viewer and how to link the reports to portal.I wouid appreciate any help.
    Cheers
    Gopi

    hi gopi,
    u can store ur reports in the database using Discoverer user edition. these stored reports can then be viewed in the discoverer Viewer. here i am assuming that u have configured ur discoverer viewer correctly.
    bye..
    naresh

  • How to call standard report with in zprogram?

    Hi Sap experts,
    How to call standard report with in zprogram.
    For example if country is 'US' then call Zprogram(zprog_US).Inside zprogram call standard report(rhecm_change_proc_status).If country is 'CA' then call zprogram.Inside zprogram call standard report.For same othercountres like 'PR','GB','ES'.Actually HR_ECM_READ_FEATURE_CARGP will having the input as employee id and will return the CAREA(County like 'US','PR'......).Kindly help me what is the procedure?
    Regards,
    Sujan

    >
    sujan T wrote:
    > Thanks for your reply.
    >
    >    What is the logic to call the standard report from zprogram?Inside the zpogram how to call standard report?
    >
    > Regards,
    > Sujan
    no special logic is required
    If u want to use
    RPUAUDOO IN THE ZREPORT.
    Put the submit button where ever required
    ex: In zreport after certain process reacedu want to call then use
    submit rpuaudoo and return.
    Regards
    Sas

  • In Oracle 10g, How to call a report since an option of a menu (*.mmb)

    Hello
    In Oracle 10g, working since the browser, how to call a report since an option of a menu (*.mmb)? I know to call it in a form (*.fmb), therefore uses the fields bean area and the objects reports, but in a menu there is not neither canvas, neither fields, neither reports. Someone would be able to help me with that?
    Kisses. Thanks.
    Annie

    I understand that you had sent me everything,
    I sent for example to you that, no to insert it in your item's menu code,
    then,You have to modify it.
    ... but
    a menu (mmb) doesn't have to define him reports
    objects... then, what parameter I send to the
    function FIND_REPORT_OBJECT:
    This is not true
    Try out this, and then let me know
    You do not need to have a report object defined in the menu. It is enough to have it in forms.
    I tried to call a report from the menu in the folowing way:
    I created a menu and wrote the following code in one item:
    DECLARE
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    BEGIN
    repid := find_report_object('report2');
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
    SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'reportserver1');
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,'C:\p.pdf');
    v_rep := RUN_REPORT_OBJECT(repid);
    END;Then I created a form with a report object called report2.
    I attached the menu to this form and while running this form, I was able to successfully run the report.
    In your case, you have to make sure that you have the dummy report object in each form that will have this attached menu.
    You can replace by the actual report name as you have written in the code.
    Regards

  • How to call a report in another report?reply plz

    how to call a report in another report?

    hi,
    chk this.
    *Code used to populate 'select-options' & execute report 
    DATA: seltab type table of rsparams,
          seltab_wa like line of seltab.
      seltab_wa-selname = 'PNPPERNR'.
      seltab_wa-sign    = 'I'.
      seltab_wa-option  = 'EQ'.
    * load each personnel number accessed from the structure into
    * parameters to be used in the report
      loop at pnppernr.
        seltab_wa-low = pnppernr-low.
        append seltab_wa to seltab.
      endloop.
      SUBMIT zreport with selection-table seltab
                                    via selection-screen.
    *Code used to populate 'parameters' & execute report 
    SUBMIT zreport with p_param1 = 'value'
                    with p_param2 = 'value'.
    Other additions for SUBMIT
    *Submit report and return to current program afterwards
    SUBMIT zreport AND RETURN.
    *Submit report via its own selection screen
    SUBMIT zreport VIA SELECTION-SCREEN.
    *Submit report using selection screen variant
    SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
    *Submit report but export resultant list to memory, rather than
    *it being displayed on screen
    SUBMIT zreport EXPORTING LIST TO MEMORY.
    *  Once report has finished and control has returned to calling
    *  program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
    *  DISPLAY_LIST to retrieve and display report.
    Regards
    Anver

  • How to call BI report  from web dynpro

    Hi ,
    How to call  BI report from webdynpro application  and what are the prerequisites for that .
    Please provide an example to work with BI application frame UI element
    Thanks

    Hi Rajpal,
    Please go through this..
    calling BI report
    Cheers,
    Kris.

  • How to call crystal report from plsql

    How to call crystal report from plsql?

    http://asktom.oracle.com/pls/ask/f?p=4950:8:14685899341865976974::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:952229840241,

  • How to call BW report from CRM via ABAP

    Hello,
    I want to call a BW report from CRM, this I want to invoke from a screen with some parameter.
    I have a BW user which I also wants to pass from CRM screen, while calling BW report as parameter.
    Can some one help me, how to invoke a BW report (in browser) from CRM ABAP code with passing username and password (which is a generic user to all) and with some parameters to BW report, so that can directly see the report output in the browser.
    Thanks a lot in advance.
    With Best Regards,
    -Praveen Soni

    Praveen,
    all you basically have to do is construct a URL in your ABAP program and call the browser with it. In the URL you can pass the right parameters. Execute your query in transaction RSRT with option HTML and you see parameters. Or execute it directly in the browser.
    When you have the URL, just do call function 'CALL_BROWSER'.
    Regards,
    Marc
    SAP NetWeaver RIG, US BI

  • How to call the Report program into Function module

    Hi Experts,
    Actually I want to create the DataSource. But I have only the ALV report program. I need to create function module but I don’t know how to call the ALV report program using in function module  
    So could you please any one send the Document or step by step method?
    Advance Thanks,
    Sathis

    If the report is just based out of a table than create a Generic Extractor using View.
    If its an InfoSet query than create a Generic Extractor on that InfoSet.
    If its an ABAP report than create a Generic Extractor using FM
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33

  • How to display abap reports in EP

    Hi all,
    I have developed new reports in R/3.
    how to display these abap reports in EP...

    Hi Rajasekaran,
    Please follow these steps,
    <b>R/3 Side:</b>
    1)Create new T-CODE in SE93 .
    2)Assign Ur Report Program to Ur T-code
    <b>Portal side:
    Creating a System:</b>
    1)System Admin -> System Config ->System Landscape -->Create a New system
    (from template)-> Select SAP system with dedicated Application Server ->fillup the following Properties in your system
    Application Host : Ur R/3 server Host Ex (10.252.10.122)
    SAP Client : ex (800)
    SAP System ID (SID) :eg(ID3)
    SAP System Number : Eg: (00)
    Server Port :Eg :3200              (00= instance )
    System Type : r/3
    User Mapping Type :admin,user
    2)Create alias for your system and set Usermapping .
    3)Test Ur system .
    <b>Creating a  Iview:</b>
    1)Create a Transaction Iview
    2)Assign ur system alias to this Iview.
    3)Assign u tcode to this Iview.
    5)Preview
    Regards,
    Ramganesan K.

Maybe you are looking for