How to call subscrreen of Standard Tcode as popup

Hi All,
    I want to call a subscreen of a standard TCode as popup.
Req :  When we click on Bill to Party partner,in Partner's tab in sales order,we  get a subscreen displaying information about the same.
Is this possible to get this subscreen as POP UP while SAVING Sales Order (when we click on SAVE to save sales order in VA01).
Please help me out.
Thanks in advance..
Regards,
Amit.

Hi Jim,
Thank you i missed this point.
So now i am planning to add custom fields to likp table and map this fields to  my custom module pool screen so on making changes the standard likp header detail should be modified. so when user clicks on save of vl02n it would update the record. How to achieve this?
and as per my above post. I have created a Zprogram with Screen 9000, now i want to call this screen, on click of button from vlo2n as pop up how to achieve this?

Similar Messages

  • How to freeze fields on standard Tcodes.

    Dear SAP Guru
    Can any one plz let me know how to freeze the fields on standars T-codes, as i want our end users to use only particular fields on standard tcodes in SAP
    Thanks in Advance
    Bhushan

    [http://theguruspeaksaboutsap.blogspot.com/2007/12/creation-of-variant-for-making.html]
    use transaction SHD0 as in the above link

  • How to Configure Workflow with Standard TCODE

    Hello Gurus,
                I am new in Workflow. I have to trigger the workflow on the transaction MM02 on changing Material Plant Status to 41. I have ZECN object. but I am not aware with how this object is trigger on change of Material Status. Please tell me the process of attaching the workflow to standard tcode. With Important Workflow TCODE.
    Thanks,
    Sandeep Thakare

    There are many ways to trigger workflow.
    Example 1) Trigger it from change object.
                  2) From function module or class.
    However, There is no configure to bind the event with transaction code.
    In your case, you can use change document object MATERIAL to trigger a business object BUS1001 event.
    you can use transaction SWEC to trigger the event and use transaction SWETYPV to bind event with workflow.
    for basic workflow go to [SAP Workflow Help|http://help.sap.com/erp2005_ehp_04/helpdata/DE/fd/517b42303e0e53e10000000a155106/frameset.htm].
    Good luck,
    Chaiphon

  • How to call screen of custom program as popup screen in standard transaction

    Hi friends,
    I have created a custom button in standard vl02n transaction in application toolbar. now when i click on this button it should display my custom screen as a pop up from my custom Ztest program. how to achive this requirement. the functionality of my custom screen is it should it has input fields, so we enter some data and on click on submit button in custom screen it should save the data in ztable and close.
    Regards,
    Siva

    Hi Jim,
    Thank you i missed this point.
    So now i am planning to add custom fields to likp table and map this fields to  my custom module pool screen so on making changes the standard likp header detail should be modified. so when user clicks on save of vl02n it would update the record. How to achieve this?
    and as per my above post. I have created a Zprogram with Screen 9000, now i want to call this screen, on click of button from vlo2n as pop up how to achieve this?

  • How to call a Standard SAP Program in Zprogram.

    Hi,
    how to call a SAP Standard program in SAP Program?
    Do we have to use any funtion module and pass paramters?
    I want to call a Standard SAP prg in to my prgram? can anyone explain me or give the piece of code to call standard prg.
    Thanks & Regards

    Again, ABAP related questions should be asked in the ABAP forum.
    To answer you question,  if the standard program is a report program, you can use the SUBMIT statement and pass parameters using the WITH Extention.
    Submit <report>
          with p_fld = 'X'
              and return.
    Please make sure to award points for helpful answers and mark your posts as solved when solved completely.  Thanks.
    Regards,
    RIch Heilman

  • How to call standard SAP method in the Custom Program ?

    Hi,
    i need to call sap standard method 'OpenItemRollinout' in my custom program. For the SAP Standard method 'OpenItemRollinoun' the BOR(Business Object) is 'PAYSCHEME'. So how to call the SAP standard method in the custom program ???

    Hi,
    In the method that you have provided only one function module is being used so better use the FM and copy the remaining code based on ur requirement.
    FM is ISU_S_PAYSCHEME_ROLLIN_ROLLOUT.
    Regards,
    Vijay.

  • To call standard tcode in webdynpro( thru webgui) : Assistance class

    Hi Gurus,
    I have an alv display in which the vbeln entries have link to action control.
    i.e when i click vbeln( sales order no), it should open a new window through its/webgui.
    1.I am getting following error when i activate , get_execute_location is private/protected.
    2. How do i go about the following code:
    wd_comp_controller->execute_get_location(
    IMPORTING
    e_host = lv_host
    e_out_protocol = lv_out_protocol
    e_port = lv_port ).
    Within my method of my assistance class I call an interface in class cl_http_server to procure my host,
    protocol and port number.
    CALL METHOD cl_http_server=>if_http_server~get_location
    IMPORTING
    host = e_host
    port = e_port
    out_protocol = e_out_protocol.
    Can some one explain in detail.
    Best Regards,
    Navin Fernandes.

    Hi Navin,
    To display a standard tcode in your webdynpro application using  ITS  you can use the following code
    DATA: url TYPE string,
            host type string,
            port type string.
    *Call below method to get host and port
      cl_http_server=>if_http_server~get_location(
         IMPORTING host = host
                port = port ).
    *create URL
      CONCATENATE 'http'
      '://' host ':' port
      '/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction=' 'SE11'
       INTO url.
    *get the window manager as we are opening t code in external window.
      DATA lo_window_manager TYPE REF TO if_wd_window_manager.
      DATA lo_api_component TYPE REF TO if_wd_component.
      DATA lo_window TYPE REF TO if_wd_window.
      lo_api_component = wd_comp_controller->wd_get_api( ).
      lo_window_manager = lo_api_component->get_window_manager( ).
    *  call the url which we created above
      lo_window_manager->create_external_window(
      exporting
      url = url
      receiving
      window = lo_window ).
      lo_window->open( ).
    Hope this helps!
    Best Regards,
    Radhika Vadher.

  • How to call a standard sap transaction in workflow

    Dear All,
    I want to know how to call a standard sap transaction inside my workflow , please tell me how to get this done .
    Kind Regards,
    Anshu Kumar

    Hi,
    You can use the FM - ABAP4_CALL_TRANSACTION u2013 Initiates a transaction in a separate window
    inside the method in the BO.
    Implement that BO and the method in the Activity of the WF..!!
    Use the FM like this:-
    CALL FUNCTION 'ABAP4_CALL_TRANSACTION'
      EXPORTING
        tcode                         = 'ZSCREEN_884' - T-Code
       SKIP_SCREEN                   = ' '
       MODE_VAL                      = 'A'
       UPDATE_VAL                    = 'A'
    EXCEPTIONS
       CALL_TRANSACTION_DENIED       = 1
       TCODE_INVALID                 = 2
       OTHERS                        = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    If you do not want to use the FM u can use this Statement:-
    call transaction 'ZSCREEN_884'. - T_CODE
    Check the following links:-
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/delegationandRedefiningmethodsofbusinessobject+BUS1001
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/workflow%252bscenario
    Let me know if you still face any issues..!!
    Regards,
    Kanika

  • How to call Subroutines,Standard Text  & using Internal Table in SmartForm

    Hi all,
    need help in the following areas.Its very urgent!
    1.How to CAll Subroutines in Smart Forms
    2.How to CAll Standard Text in Smart Forms
    Situation:
    We have an Internal Table T_SALES with all the data which am going to display in the smartform,How to retrive data from an internal table in Smart forms
    Any Help in this direction would be highly appreciated.
    Regards
    Ramu

    Hi,
      When you are using quantity or currency fields, you have to mentiong the reference fileds in a tab called CURRENCY/QUANTITY FILEDS in the GLOBAL DATA node.
    Specifying a Currency or Quantity Reference
    Use
    In the ABAP Dictionary, you can assign a currency or quantity field to a table field. In the output of these fields, the system can then insert the relevant currency or unit:
    ·        If the value field is in the same table as the corresponding currency or quantity field, the system recognizes the reference automatically, and formats the value field according to the currency or unit in the assigned field.
    ·        If the value field is in a different table from the currency or quantity field, the system cannot recognize this reference automatically.
    In the second case, you must indicate this reference to the system in the form, to ensure that the value field is formatted correctly.
    Procedure
    You want to assign a currency or quantity field in one table (for example, CURTAB) to a value field in another table (for example, VALTAB).
           1.      Create the reference to the currency field by entering the following values:
    -         Field Name: VALTAB-VALUE, if this is the value field of VALTAB that you want to display.
    -         Reference Field: CURTAB-CURRENCY, which is the currency field of CURTAB.
           2.      Under Data Type, specify whether the data type is a currency or quantity.
    Result
    In the output of the PDF-based print form, the system formats the value field VALTAB-VALUE according to the assigned value in the currency or quantity field of the global variable CURTAB-CURRENCY.
    Thanks and Regards,
    Bharat Kumar Reddy.V
    Message was Added by: Bharat Reddy V
    Message was Added by: Bharat Reddy V

  • How to call Standard Iviews in Webdynpro application?

    How to call STD iviews  in the wwbdynpro application.
    can any of friends give the code

    Use this snippet to call standard iviews from your webdynpro code :
    //use LinktoAction UI element
    onActionClick (com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent)
    WDPortalNavigation.navigateAbsolute("ROLES://portal_content/folders/X.Iview", WDPortalNavigationMode.SHOW_INPLACE, (String)null, (String)null, WDPortalNavigationHistoryMode.NO_DUPLICATIONS, "Called iView Name", (String)null, (String)null);
    Hope this helps.
    Rgds
    Prabhakar

  • How to call a standard BOR method in a program.

    Hi All,
    How to call a standard BOR method in a program. For example I have to call BOR method ISUSMORDER.Release in my program but don't know how to call.
    Also, plz tell me how to capture the Exceptions in case of BOR method.
    Plz help me out in this.
    Thanks,
    Mithilesh

    Would be easier (however not always possible), to determine the functionality of this method and call that in your program. I mean, normally this method calls a BAPI, or function module (or a transaction). Have a look at the coding inside of the method, and try and use this.

  • How to call standard report with in zprogram?

    Hi Sap experts,
    How to call standard report with in zprogram.
    For example if country is 'US' then call Zprogram(zprog_US).Inside zprogram call standard report(rhecm_change_proc_status).If country is 'CA' then call zprogram.Inside zprogram call standard report.For same othercountres like 'PR','GB','ES'.Actually HR_ECM_READ_FEATURE_CARGP will having the input as employee id and will return the CAREA(County like 'US','PR'......).Kindly help me what is the procedure?
    Regards,
    Sujan

    >
    sujan T wrote:
    > Thanks for your reply.
    >
    >    What is the logic to call the standard report from zprogram?Inside the zpogram how to call standard report?
    >
    > Regards,
    > Sujan
    no special logic is required
    If u want to use
    RPUAUDOO IN THE ZREPORT.
    Put the submit button where ever required
    ex: In zreport after certain process reacedu want to call then use
    submit rpuaudoo and return.
    Regards
    Sas

  • How to call standard form from your custom forms

    Hi,
    I submits concurrent program(SRS) from custom form and then i would like to call view requests standard form rather navigating manually?
    Please can anyone tell me how to do above?
    Thanks
    ESL

    Hi Esl ;
    Please check [this search|http://forums.oracle.com/forums/search.jspa?forumID=475&threadID=&q=call+standard+form+from+custom+forms&objID=c84&dateRange=all&userID=&numResults=15&rankBy=10001]
    Please also check those and see helpful:
    Forms Customization
    Re: Enable Submit Button at User Level and Disable at Block Level
    Forms Personalization Document
    Re: Forms Personalization Document
    Regard
    Helios

  • How to get the form name which is used in standard tcode like me23n in sap

    how to get the form name which is used in standard tcode like me23n in sap
    Moderator message: four out of four threads locked, please read and understand the following before posting further:
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
    Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

    how to get the form name which is used in standard tcode like me23n in sap
    Moderator message: four out of four threads locked, please read and understand the following before posting further:
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
    Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

  • How to call the Standard Program in our ZPROGRAM?

    Hi Frieds can you tell me the procedure how to call the Standard program
    in z----
    program and we have to get the data from standard one to our customer program.
    Thanks in advance,
    madan mohan.

    Hi,
    *Submit report but export resultant list to memory, rather than
    *it being displayed on screen
    SUBMIT zreport EXPORTING LIST TO MEMORY.
    Once report has finished and control has returned to calling
    program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
    DISPLAY_LIST to retrieve and display report.
    *Example Code (Retrieving list from memory)
    DATA  BEGIN OF itab_list OCCURS 0.
            INCLUDE STRUCTURE abaplist.
    DATA  END OF itab_list.
    DATA: BEGIN OF vlist OCCURS 0,
            filler1(01)   TYPE c,
            field1(06)    TYPE c,
            filler(08)    TYPE c,
            field2(10)    TYPE c,
            filler3(01)   TYPE c,
            field3(10)    TYPE c,
            filler4(01)   TYPE c,
            field4(3)     TYPE c,
            filler5(02)   TYPE c,
            field5(15)    TYPE c,
            filler6(02)   TYPE c,
            field6(30)    TYPE c,
            filler7(43)   TYPE c,
            field7(10)    TYPE c,
          END OF vlist.
    SUBMIT zreport EXPORTING LIST TO MEMORY.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        listobject = itab_list
      EXCEPTIONS
        not_found  = 4
        OTHERS     = 8.
    CALL FUNCTION 'LIST_TO_ASCI'
      EXPORTING
        list_index         = -1
      TABLES
        listasci           = vlist
        listobject         = itab_list
      EXCEPTIONS
        empty_list         = 1
        list_index_invalid = 2
        OTHERS             = 3.
    IF sy-subrc NE '0'.
      WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
    ENDIF.
    Regards
    Sudheer

Maybe you are looking for

  • XML file not being read by Accordion Demo

    I had this working last week and it was a beautiful thing. I subsequently added many more product items to the products.xml file and resent it, now the products.xml file is not being read by the index page. I have read all the posts and added all the

  • Error with Download JDBC Drivers page

    There appears to be an error with the JDBC Drivers download page. When navigating from the top-level download page, all I'm seeing is '<SCRIPT LANGUAGE="javascri'. Is there another page from which I can download the driver? Guy Heathcote Ordnance Sur

  • Airport Express Bridge

    Please forgive me if this has already been covered. I did a search and tried some of the ideas but haven't had any luck. Here is my problem. I have a 2Wire wireless modem. My G5 Mac can access it in wireless or ethernet mode. I have a PC in another r

  • Windows Commands on a MAC

    Hi Can anyone help. I'm switching from a PC to a MAC Book Pro and I need to be able to do screen grabs to paste into a word document (on Parallels). If I was doing this on a PC it'd be the 'Alt & Print Screen' Command. How do I do this on a MAC??

  • TDMS: Copy Client Source Profile SAP_UCSV

    Hello guys I've created a new client to do a process type. The copy client source profile SAP_UCSV in my new client must be 000 or my sender client (in this case 800)? Thanks in advance. Raúl.