How to call transaction MRKO in background

Hi All,
I want to call transaction MRKO in foreground step in workflow.
After calling transaction I want to get the posted document number.
I do not have any information prior to calling transaction regarding input fields for MRKO. User can put anything and settle consignment.
Next step in workflow needs information, like posted document number from MRKO to do further processing ..
How can I achieve this?
Thanks ,
Vinaya.

Hi,
you have to define a handler for the event hotspot_click of class CL_GUI_ALV_GRID, if you are using that class. If you are using class CL_SALV_TABLE maybe class CL_SALV_EVENTS_TABLE may help you.
Regards,
Klaus

Similar Messages

How to set the BDC Call transaction Program in Background

Hi All,
        I have a requirement. If i execute a BDC Call Transaction Program in Background it is showing 0 seconds means it is not executing. Normally it is working properly. If execute in background it is not executing. But my client wnats to execute in background. How can i overcome this could you please suggest me?
Thanks in Advance

hi
To schedule the processing of session in backgroud you can use report RSBDCSUB.
You can do in two ways -
Ist Method
Define a batch job in SM36 with two steps -
First Step - Your Custom Program ( with a variant )
Second Step - RSBDCSUB ( With a variant having
the session name ).
2nd Method
In your program after BDC_CLOSE_GROUP add a line.
SUBMIT RSBDCSUB WITH MAPPE EQ <SESSION_NAME>.
Scedule you program as a batch job in SM36 ( Single Step ). ( You can also test the program by running in online mode . After your programs executes , go and see in SM35. You will see that your session created in being processed or has been processed in background).
In Both ways the session created by BDC_OPEN_GROUP will be processed in background
You would have to create a job on the fly to do this. This example shows how to kick off a background job via an ABAP program.
report zrich_0004 .
data:   sdate type sy-datum,
        stime type sy-uzeit,
        l_valid,
        ls_params like pri_params,
        l_jobcount like tbtcjob-jobcount,
        l_jobname like tbtcjob-jobname.
start-of-selection.
Get Print Parameters
call function 'GET_PRINT_PARAMETERS'
       exporting
            no_dialog      = 'X'
       importing
            valid          = l_valid
            out_parameters = ls_params.
Open Job
l_jobname = 'ZRICH_0005'.
call function 'JOB_OPEN'
       exporting
            jobname = l_jobname
       importing
            jobcount = l_jobcount.
Submit report to job
submit zrich_0005
       via job     l_jobname
           number l_jobcount
       to sap-spool without spool dynpro
           spool parameters ls_params
              and return.
Schedule and close job.
call function 'JOB_CLOSE'
       exporting
            jobcount = l_jobcount
            jobname   = l_jobname
            strtimmed = 'X.
regards
Satish

How to call transaction in an abap program

how do we open a transaction thru an abap program and pass a parameter to it

Use call transaction. You can fill up the parameters in the BDC internal table
DATA:   bdc_tab LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
DATA:   messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
CONSTANTS: c_tcode LIKE t130m-tcode VALUE 'FB01'. "Tcode you want to call
        CALL TRANSACTION c_tcode
             USING bdc_tab
             MODE   'N'
             UPDATE 'S'
             MESSAGES INTO messtab.
Error message will be captured in the messtab.
You can goto the SAP help on Call transaction to see all the details and options.
<b><REMOVED BY MODERATOR></b>
Thanks.
Message was edited by:
        Alvaro Tejada Galindo

Execute CALL TRANSACTION in the background....

Hi,
I want to use CALL TRANSACTION in a report program and execute this report in the background.
There is not GUI_UPLOAD / GUI_DOWNLOAD used anywhere.
Can someone suggest me what precaution I need to take in my code for CALL TRANSACTION?
Is there any additional code for background processing?
Thanks.

hi,
this is the sample code:
Precations need to take :
1. see that u r transfer tha data in correct field, on correct screen, and of correct format.
2. capture the error logs in bdcmsgcoll - error logs have to be handle.
3. ensure correct recording.
in selection screen you can mention in which mode u want :
A     Display all screens
E     Display errors
N     Background processing
P     Background processing; debugging possible
This is the sample code:
& Report ZKO01_BDC                                                       &
& Object Id       :                                                       &
& Object Name     : ZKO01_BDC                                             &
& Program Name    : ZKO01_BDC                                             &
& Transaction Code: ZKO01_BDC                                             &
& Module Name     : FI / CO                                               &
& Program Type    : BDC Program      Create Date     : 23.06.2008         &
& SAP Release     : 6.0              Transport No    :                    &
& Description     : BDC to upload internal order with indernal assignment &
& Version         : 1.0.                                                  &
& Changed on      :                                                       &
report zko01_bdc
       no standard page heading line-size 255.
types: begin of record,
        auart_001(004),
        ktext_002(040),
        bukrs_003(004),
        werks_004(004),      " ADDED NEW - RAHUL SHINDE
        scope_005(010),
        prctr_006(004),      " ADDED NEW - RAHUL SHINDE
        waers_007(005),
        astkz_008(001),
        plint_009(001),
      end of record.
types: begin of ty_stats,
       mess(72) type c,
       auart_001(004),
       text(18) type c,
       end of ty_stats.
data : it_record type table of record,
        wa_record like line of it_record.
data: bdcdata type table of bdcdata,
      mestab type table of bdcmsgcoll.
data : stats type table of ty_stats.
data: opt type ctu_params.
data: m(72) type c.
data : fl_name type string.
data : wa_bdcdata like line of bdcdata,
        wa_mestab like line of mestab.
data : wa_stats like line of stats.
data:   ctumode like ctu_params-dismode.
data:   cupdate like ctu_params-updmode.
data: file type rlgrap-filename.
data: xcel type table of alsmex_tabline with header line.
data: mod1(1) type c.
initialization.
opt-dismode = 'A'.
opt-updmode = 'S'.
opt-nobinpt = 'X'.   "No batch input mode
                    Selection Screen
selection-screen begin of block bk1 with frame.
selection-screen skip 1.
parameters p_file type localfile. " default 'D:\Common\PWC\Asset BDC\Book2.xls'.
parameters p_mode like ctu_params-dismode obligatory.
selection-screen skip 1.
selection-screen end of block bk1.
file = p_file.
mod1 = p_mode.
at selection-screen on value-request for p_file.
call function 'KD_GET_FILENAME_ON_F4'
       exporting
            static    = 'X'
       changing
            file_name = p_file.
                    Selection Screen
start-of-selection.
file = p_file.
ctumode = mod1.
cupdate = 'L'.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       exporting
            filename                = file
            i_begin_col             = '1'
            i_begin_row             = '1'
            i_end_col               = '100'
            i_end_row               = '5000'
       tables
            intern                  = xcel
       exceptions
            inconsistent_parameters = 1
            upload_ole              = 2
            others                  = 3.
loop at xcel.
case xcel-col.
    when '0001'.
        wa_record-auart_001 = xcel-value.      "ok
    when '0002'.
        wa_record-ktext_002 = xcel-value.      "ok
    when '0003'.
        wa_record-bukrs_003 = xcel-value.      "ok
    when '0004'.
        wa_record-werks_004 = xcel-value.      "ok
    when '0005'.
        wa_record-scope_005 = xcel-value.      "ok
   when '0005'.
       wa_record-KTEXT_005 = xcel-value.    "ok
    when '0006'.
        wa_record-prctr_006 = xcel-value.      "ok
    when '0007'.
        wa_record-waers_007 = xcel-value.      "ok
    when '0008'.
        wa_record-astkz_008 = xcel-value.      "ok
    when '0009'.
        wa_record-plint_009 = xcel-value.      "ok
endcase.
at end of row.
    append wa_record to it_record.
    clear wa_record.
endat.
endloop.
loop at it_record into wa_record.
perform bdc_dynpro      using 'SAPMKAUF' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'COAS-AUART'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'COAS-AUART'
                              wa_record-auart_001.
perform bdc_dynpro      using 'SAPMKAUF' '0600'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BUT2'.
perform bdc_field       using 'COAS-KTEXT'
                              wa_record-ktext_002.
perform bdc_field       using 'BDC_CURSOR'
                              'COAS-SCOPE'.
perform bdc_field       using 'COAS-BUKRS'
                              wa_record-bukrs_003.
perform bdc_field       using 'COAS-WERKS'
                              wa_record-werks_004.
perform bdc_field       using 'COAS-SCOPE'
                              wa_record-scope_005.
perform bdc_field       using 'COAS-PRCTR'
                              wa_record-prctr_006.
perform bdc_dynpro      using 'SAPMKAUF' '0600'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SICH'.
*perform bdc_field       using 'COAS-KTEXT'
                             wa_record-KTEXT_005.
perform bdc_field       using 'BDC_CURSOR'
                              'COAS-PLINT'.
perform bdc_field       using 'COAS-WAERS'
                              wa_record-waers_007.
perform bdc_field       using 'COAS-ASTKZ'
                              wa_record-astkz_008.
perform bdc_field       using 'COAS-PLINT'
                              wa_record-plint_009.
call transaction 'KO01' using bdcdata
                        options from opt
                        messages into mestab.
*PERFORM loggs.
clear wa_record.
refresh bdcdata.
endloop.
end-of-selection.
clear : wa_stats.
if stats is initial.
    write :/ text-001.
else.
loop at stats into wa_stats.                         "displays runtime messages
    write:/ 'MESSAGE :',wa_stats-auart_001.
    if wa_stats-auart_001 is not initial.
    write:/ wa_stats-auart_001, wa_stats-text.
    endif.
    skip 1.
endloop.
endif.
*& FORMS BDC_DYNPRO
form bdc_dynpro using program dynpro.
clear wa_bdcdata.
wa_bdcdata-program = program.
wa_bdcdata-dynpro   = dynpro.
wa_bdcdata-dynbegin = 'X'.
append wa_bdcdata to bdcdata..
endform.
FORM BDC_FIELD                                                 *
form bdc_field using fnam fval.
    clear wa_bdcdata.
    wa_bdcdata-fnam = fnam.
    wa_bdcdata-fval = fval.
    append wa_bdcdata to bdcdata..
endform.
*&      Form loggs
      text
--> p1        text
<-- p2        text
form loggs .
loop at mestab into wa_mestab.
    if wa_mestab-msgtyp = 'E'.
      call function 'FORMAT_MESSAGE'
        exporting
          id        = wa_mestab-msgid
          lang      = 'E'
          no        = wa_mestab-msgnr
          v1        = wa_mestab-msgv1
          v2        = wa_mestab-msgv2
          v3        = wa_mestab-msgv3
          v4        = wa_mestab-msgv4
        importing
          msg       = m
        exceptions
          not_found = 1
          others    = 2.
      wa_stats-mess = m.
      wa_stats-text = text-001.            "'Not Created'.
      wa_stats-auart_001 = wa_record-auart_001.
      "wa_stats-sernr = wa_flat-sernr.
      append wa_stats to stats.
    elseif wa_mestab-msgtyp = 'S'.
      call function 'FORMAT_MESSAGE'
        exporting
          id        = wa_mestab-msgid
          lang      = 'E'
          no        = wa_mestab-msgnr
          v1        = wa_mestab-msgv1
          v2        = wa_mestab-msgv2
          v3        = wa_mestab-msgv3
          v4        = wa_mestab-msgv4
        importing
          msg       = m
        exceptions
          not_found = 1
          others    = 2.
      if wa_mestab-dyname = 'SAPMIEQ0'
                                and wa_mestab-dynumb = '0101'
                                and wa_mestab-msgspra = 'E'
                                and wa_mestab-msgid = 'IS'
                                and wa_mestab-msgnr = '144'.
        loop at stats into wa_stats where auart_001 = wa_record-auart_001.
                                      "and sernr = wa_flat-sernr.
             delete stats.
        endloop.
            clear : wa_stats.
            wa_stats-mess = m.
            append wa_stats to stats.
      endif.
    endif.
    clear : wa_stats.
endloop.
endform.                    " loggs
Edited by: Naseeruddin on Nov 26, 2008 8:57 AM

How to call transaction xd03 in alv using interactive

hi experts ,
i want code when i click on any value of kunner column in alv grid it call transaction xd03 .but it using interactive format on single click . please elp me
Moderator message : Not enough re-search before posting, requirements dumping is not allowed. Thread locked.
Edited by: Vinod Kumar on Nov 28, 2011 12:15 PM

Hi,
you have to define a handler for the event hotspot_click of class CL_GUI_ALV_GRID, if you are using that class. If you are using class CL_SALV_TABLE maybe class CL_SALV_EVENTS_TABLE may help you.
Regards,
Klaus

How to call transaction in workflow

Hi All,
I want to call transaction in my workflow .
Can anyone tell me about it?

Hi,
first create activity task in workflow. create a new methos inside BO.
Then call the FM 'ABAP4_CALL_TRANSACTION' in the BO method.
use this FM for call transaction from ABAP code.
Regards,
Jyothi CH.

How to Call Transaction iView that calls RRMXP from Web Dynpro for ABAP

Dear Experts,,
I'm developing an application in Web Dynpro for ABAP wherein I'm supposed to give a link that should open an SAP Transaction iView that calls tcode = 'RRMXP' and I pass the application parameter as QUERY/WBID = <BI query/Workbook ID>.
I tried calling com.sap.portal.appintegrator.sap.bwc.Transaction iView, but it asks for system/application and GUI type parameters. How to pass through the URL?
Any help would be highly appreciated
Regds,
Srini

Hi Wolfgang,,
My problem was that I was supposed to call the BeX Web Analyser ( a BI excel based tool - client installation) on click of a button in my WD-ABAP application. I solved it as follows :
In the portal pcd, I cam across a folder content provided by SAP. Here, you'll find standard template iViews that can be used to call applications ( for which you make iViews). I had to call an SAP TCode : RRMXP so as to call a BI Workbook/Query.
So, I called the standard iView template for sap_transaction_iView as follows :
irj/servlet/prt/portal/prtmode/preview/prtroot/'
           'pcd!3aportal_content!2fcom.sap.pct!2ftemplates'
           '!2fiviews!2fcom.sap.portal.sap_transaction_iview?'
           'sap-config-mode=true&System=BWR3System&TCode=RRMXP'
           '&GuiType=WinGui&OkCode=y&ApplicationParameter=' <appnm> into url.
      l_popup =
         l_window_manager->create_external_window( url = url
                                      has_menubar = ' '
                                     has_statusbar = ' '
                                      has_toolbar = ' '
                                      has_location = ' ').
      l_popup->open( ).
And , it worked.
Any more help pls feel free to revert.
Regds,
Srini

How to call transaction PC00_M10_CDTC from webdynpro?

Hi all,
I am newbie to webdypro. I need a step by step guidance on this. I have come across a solution by Vishal Kapoor as followed. But I need more elaboration on the steps.
1: Call below method to get host, port and protocol
cl_http_server=>if_http_server~get_location
2: concatenate protocol '://' host ':' port '/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction='your tcode name' into url
3: get the window manager as we are opening t code in external window.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
4: Call the url which we created above
lo_window_manager->create_external_window(
EXPORTING
url = url
RECEIVING
window = lo_window ).
The T code will be executed using the integrated ITS
Questions:
1. what ui element do i need? (link to url?)
2. Where do i put in this chunk of codes? ( create a abc method?)
3. How can I trigger this piece of code from the ui element? ( the connection/link between the ui element and method)
Thanks all in advance.
Edited by: Siong Chao on Mar 22, 2010 5:22 AM
Edited by: Siong Chao on Mar 22, 2010 5:25 AM

Hi,
1. First decide when you have to call this transaction.. I mean which UI element must be used..ie whether on clicking a link ( either link to Action or Link to URL UI element ) or just need to call after a pressing a button(UI element ) likewise..
2. Suppose If you are using a link to action UI element, give some text in the Text property and create an event in OnAction method..
3. Double click that method and wrote the coding u want.. I mean as u mentioned before.. For example
i have used
   DATA LO_COMPONENTCONTROLLER TYPE REF TO IG_COMPONENTCONTROLLER .
LO_COMPONENTCONTROLLER =   WD_THIS->GET_COMPONENTCONTROLLER_CTR( ).
    DATA LO_API_COMPONENTCONTROLLER TYPE REF TO IF_WD_COMPONENT.
    LO_API_COMPONENTCONTROLLER = LO_COMPONENTCONTROLLER->WD_GET_API( ).
DATA LO_WINDOW_MANAGER TYPE REF TO IF_WD_WINDOW_MANAGER.
CALL METHOD LO_API_COMPONENTCONTROLLER->GET_WINDOW_MANAGER
    RECEIVING
      WINDOW_MANAGER = LO_WINDOW_MANAGER.
DATA LO_WD_WINDOW TYPE REF TO IF_WD_WINDOW.
CALL METHOD LO_WINDOW_MANAGER->CREATE_EXTERNAL_WINDOW
    EXPORTING
      URL           =
'http:<domain>/sap/bc/gui/sap/its/webgui?~TRANSACTION=<urtransaction name>'
     TITLE          = 'Display Material'
*    MODAL          = ABAP_FALSE
*    HAS_MENUBAR    = ABAP_TRUE
*    IS_RESIZABLE   = ABAP_TRUE
*    HAS_SCROLLBARS = ABAP_TRUE
*    HAS_STATUSBAR = ABAP_TRUE
*    HAS_TOOLBAR    = ABAP_TRUE
*    HAS_LOCATION   = ABAP_TRUE
    RECEIVING
      WINDOW         = LO_WD_WINDOW.
LO_WD_WINDOW->open( )
Suppose if u want to create a Link to URL UI element.. Just create it and pass URL to the Reference Property of that.. Ur URl will automatically called in new window..

How to call transaction from webdynpro application

Hi Experts,
I have a web dynpro component zxx_comp.its corresponding web dynpro application zxx_app.
my requirement is , when i test the webdynpro application, i have to call a transaction zxx_txn corresponds to the module pool program zxx_pgm directly . How can i do that?
Regards
Ashwin KV

Hi Ashwin,
Use the following to open a T-Code from WD application.
CALL METHOD cl_http_server=>if_http_server~get_location
IMPORTING
host = lv_host
port = lv_port
out_protocol = lv_protocol.
DATA lv_url type string.
concatenate lv_protocol '://' lv_host ':' lv_port '/sap/bc/gui/sap/its/webgui/?sap-client=&~transaction='zxx_txn' into lv_url.
DATA lo_window_manager TYPE REF TO if_wd_window_manager.
DATA lo_api_component TYPE REF TO if_wd_component.
DATA lo_window         TYPE REF TO if_wd_window.
lo_api_component = wd_comp_controller->wd_get_api( ).
lo_window_manager = lo_api_component->get_window_manager( ).
lo_window_manager->create_external_window(
     EXPORTING
       url    = lv_url
     RECEIVING
       window = lo_window ).
Regards,
Harsha

Personas: how to call Transaction code using a Script Button?

Hi,
I want to use a script button to run to certain UI based on the given transaction code. I am thinking there might be some ways to do so:
Option 1:
Somehow one can let the script button call the T-code in script, say, IW21, but how to write such script?
Option 2:
In the script of the script button, use "Push" or "Click" to cause an action on the launch button which contains the T-code, say /nIW21.
But on my PC, this does not work. Why?
pls help asap!
Thx a lot!
Br,
Dong

Knowledge sharing:
Hi,
I have found exact answer to this question: in the script of a script button, one can first set the T-code to the /okdc component, then call "press Enter" action. By this way, any script button can be used to triggle an action for a T-code. One can set teh /okdc as "hidden". Hope this will help other newers.
Br,
Dong

Call Transaction in Background for IW52

Hi All..
When i execute my BDC (Call Transaction) in foreground, the code will update IW52 screens without any errors/warnings.
But if we schedule this in background, the IW52 screens are not getting updated.
Even there are no Errors observed.
We have used the syntax as follows..
CALL Transaction IW52 using it_bdcdata MODE 'N' messages into it_bdcmsg.
Can anyone help me how to rectify it and make it to execute successfully in background mode..??
Your Help will be highly appreciated..
Regards
Pavan

Hello Friends...
I am running a call Transaction code in Background mode.
I am facing Error message..
If i run the same in foreground, it is working fine...
Error Message is "No Batch Input data for screen <SAPNV screen No>"
Expecting your guidence in this case...
Regards
Pavan
Message was edited by:
Pavan Sanganal

Call transaction in Background job

Hi,
I am executing a program in background. In that program I am having a CALL TRANSACTION as below:
CALL TRANSACTION 'ME22'
    USING g_t_bdctab
    MODE 'N'
    UPDATE 'S'
    MESSAGES into g_t_bdcmsg.
But it is not working. The same is working when the program is executed in foreground.
Is this means, we cannot have CALL TRANSACTION in background?
If Yes, then what could be the solution for it?
Thanks,
Pankaj.

Hello Pankaj,
Call transaction works in background.
Provided you are not picking file from presentation server.
If you are picking file from presentation server, place the same file in application server and during background job pick the file from application server then your program works perfectly.
Regards,
Tarun

Call transaction in user exit?

Hi
can we say "call transaction" in the background?.while using user exit...
regds
gunjan

Hi Gunjan
I've to consider you ( or your exit) are in trx, so if you need to update some tables or another object don't belong to main trx, you make sure to do the updating only if the main trx is finished successfully.
So it's usually placed the code for updating in a exit called before saving.
But also you make sure the saving is done successfully, SAP usually does the saving in update tusk, so it has to call a COMMIT to start the saving action.
When the COMMIT is called you can be sure the saving'll be done.
So if you run your code in update tusk, you'll be sure your action'll start after saving.
For these reason you should insert your code in a form called in update tusk.
PERFORM UPDATE_MY_DATABASE ON COMMIT.
So only when the system'll do the commit your code'll work.
Max

Call transaction variant from IW51

hi ,
i have created a transaction variant for va01.
i want to call this transaction only when user creates sales order
from IW51(service notification) .i dont know how to call transaction variant from iw51.
i would appreciate your help on this.
thanks,
yoga

Hi,
You may refer this
Passing Variant's value to a transaction iview
Thanks
Prashant

How to create a background job for call transaction

hi gurus
can any one suggest me
how to create the background job for call transaction.
thank you
regards
kals.

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926107&messageID=889652
Regards
Kiran Sure

How to call transaction MRKO in background

Similar Messages

Maybe you are looking for