How to Cancel a PO which is waiting for Apprval.

Guru's
Unfortunately our buyer has created a PO with wrong a/c number and it went to my president for approval.How can i cancel this PO before he rejects it.
P.S : Dont want to ask him to reject it.
Rgds,pv

Hi
Please review the following note from metalink:
cancelling purchase orders / purchase orer lines [ID 105840.1]
Hope this helps.
Thanks and Regards
Manish Jain

Similar Messages

How to cancel sales order which I placed?

How to cancel sales order which I placed? And this order had not been delivered.

Rejection SO & Cancellation SO both are same. So please follow the below steps-
1. Use Tcode VA02
2. Enter Sales order number which you want to cancel.
3. Click "enter"
4. Click the icon "Reject Document"
5. Select suitable u2018Reason for rejectionu2019.
6. Save
Many Thanks & Regards,
Susanta K Senapati

How long does 'extracting' take? Already waiting for over 2 hrs to complete process.

How long does 'extracting' take? Already waiting for over 2 hrs to complete process. MAB1953

Where did you choose to download the install files too? This often occurs when choosing a location the Adobe Download Assistant does not have permission to write too. Please cancel the download and try again this time choosing the default location of your User folder.

How i can return money which were paid for increase in volume of storage in iCloud

How i can return money which were paid for increase in volume of storage in iCloud

The following link to Apple's iCloud storage upgrade cancellation policy may help: http://support.apple.com/kb/PH12798

How can I unmark photos which are marked for republish to Flickr?

I am currently using Lightroom 3 to publish photos to Flickr. I have a free Flickr account.
My problem is that I have a set of photos I am publishing to flickr. For some reason some of my photos lost their keywords, only the files on my computer lost them, the photos on Flickr still have the keywords intact. Also I applied a colour code to a couple of the photos on my hard disk that are being published to Flickr.
Now Lightroom has detected these changes and the photos appear under 'Modified Photos to repblish' the thing is the changes I made were either putting keywords back in that were already in Flickr anyway, and colour coding which makes no different to flickr. Because I have a free account if I republish the photos I will lose all the comments and stats on Flickr, so I don't want to republish them.
Whenever I click the publish button I get a warning that republishing the changed photos will lose any information on flickr and I have the option to skip them, and just publish new photos. But if I ever do want to republish a photo I won't be able to do this without also republishing all the photos marked for republish.
Is there any way I can remove these photos from the republish list?

All,
This is an issue with the LR programming, as it does NOT allow you to unmark images it feels need to be republished. Oftentimes it's only a matter of adding a keyword or tweaking the develop settings that triggers this. I for one wish that choice was available.
Here's what you can do: simply disconnect from the Flickr service. Doing so will have NO detrimental effect on the images in Lightroom or the images you have already uploaded to Flickr. What you will lose, however, is the "library" of images that you have already uploaded to Flickr. Since this is really only a collection there's no harm. Besides, if you need to review which of your images have been uploaded to Flickr at a later time, just reference Flickr. Oh, you'll also lose Lightroom's ability to download any comments your Flickr contacts make on your uploaded images. If it's important for you have that data in Lightroom, rethink the disconnect option. After disconnecting, reconnect using the same parameters you had before. Your Lightroom/Flicker collection will be cleared of all previously uploaded images and you can begin adding new images to upload.
Again, disconnecting has no effect on your Flickr content. However, if you REMOVE images from the collection using Lightroom, they will also be removed from Flickr. Please understand the distinction between disconnecting from the Service and removal of images using Lightroom.
All that being said, republishing images from Lightroom to Flickr, in my experience, should not cost you anything in terms of number of views, favorites, comments, etc. It should be seamless.
Judson Rhodes, Photographer
www.flickr.com/jrcp/show
www.judsonr.com
Date: Tue, 29 Mar 2011 09:43:18 -0600
From: [email protected]
To: [email protected]
Subject: How can I unmark photos which are marked for republish to Flickr?
Hi,
I'm using LR 3.2 and am having the same issue. I see that no one from Adobe has replied to this and that the previous reply was from August, 2010. There seem to be no answers to this one...
I have several images that LR feels should be republished, and ONE image that I want to republish. I CAN'T republish just that one image though without republishing ALL the other images.
Can someone (maybe someone from Adobe) help me with this? How can I simply UNmark the other images to not be republished? I do not want to remove them from the collection, but simply do not want to republish them at this time.
Why can't Adobe simply ask us if an image should be republished or not? Why can't they allow us to UNmark an image to be republished once it's marked?
Ideas?? HELP!
Thanks!
Steve
>

HT204053 i just brought new i phone 5 yesterday and now i can see all paid applications and i dont use or have credit card also now how i can buy applications which are important for me? can i buy them online? or use debit card

i just brought new i phone 5 yesterday and now i can see all paid applications and i dont use or have credit card also now how i can buy applications which are important for me? can i buy them online? or use debit card and trust me all my friends are regretting buying phone because of this problem.Kindly help.Cant it can be deducted from our mobile charges?i would be much easier then

You can buy apps using iTunes Gift cards without needing to register your debit card.
http://store.apple.com/us/personalize/itunes

HT201274 My iphone4 is taking more than 5 hours to erase all the data still it is under process , still how much more time i have to wait for my mobile to ON

My iphone4 is taking more than 5 hours to erase all the data still it is under process , still how much more time i have to wait for my mobile to ON ?

I'm having this EXACT same problem with my iPhone 4, and I have the same computer stats (I have a Samsung Series 7)

How can I download a transfer without waiting for it be all transferred?

How can I download a transfer without waiting for it be all transferred? Thanks.

Thanks, that now makes sense. Once an item enters the download queue, the user cannot remove it. Either let it complete the download (easiest) or contact the iTunes Store customer support department through the Contact page (select the category and subcategory closest to the issue you're reporting and you'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) and ask them if they'll remove the item(s) from your queue for you.
Regards.

How to pause while document printing and wait for user actions.

How to pause while document printing and wait for user actions. (for sample: pressed button). Pause after each printed pages.

Print page by page after considering the user actions!

My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.

My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing worked

My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing worked

How to cancel processed messages with acknowledgement waiting status

Hi All,
Messages processed successfully in Integration Server but messages still waiting for acknowledgement. I want to cancel these messages.Will u please let me know how to do delete these messages.I already canceled messages with status to be delivered in Integration Engine and Adapter Engine. But in SXMB_MONI, messages are processed successfully with waiting status.Please suggest how we need to cancel them.
Please Suggest some possible solution.
Regards,
Kanisha Sharma
Edited by: kanisha on Jul 2, 2010 8:28 AM

Hi,
Thanks for your reply.Yes it is an IDOC based scenario. But Idoc is in outbound side. Idoc processed successfully in ERP as well as PI processed successfully to MDM.Messages processed successfully in SXMB_MONI but once imported in MDM IS, then acknowledgement will be send to PI.My issue is:- MDM server is down and i want to cancel these messages.
Please suggest
Regards,
Kanisha Sharma

How do I get an actor to wait for its nested actors to stop running before stopping itself?

I'm developing a series of projects that are based on the Actor Framework and my actor dependency hierarchy is starting to get some depth. One of the issues I'm facing now is making sure that each actor will only stop running (and signal this via a Last Ack to a higher-level actor or via a notification to non-AF code that launches it) once all of its nested actors have stopped running.
For instance, say I have a type of actor that handles communication with a microcontroller over USB - a USB Controller Actor. I might want to have an application-specific actor that launches USB Controller Actor to issue commands to the microcontroller. When shutting down, I want this top-level actor to send a Stop Msg to USB Controller Actor and then wait to receive a Last Ack back before sending a notification within a provided notifier to the non-AF application code, which can then finish shutting down completely.
I'm sure that having actors wait for all nested actors to shutdown before shutting down themselves is an extremely common requirement and I'm confident National Instruments have made it possible to handle that in a simple, elegant manner. I'm just struggling to figure out what that is.
The approaches I've experimented with are:
Creating a pseudo "Stop" message for an actor that won't actually stop it running straight away, but instruct it to stop all nested actors, wait for their Last Acks and then shut itself down by sending Stop Msg to itself. This isn't elegant because it means the client will be forced to fire off these pseudo stop messages instead of Stop Msg to certain actors.
Instantiating an internally-used notifier and overriding Stop Core.vi and Handle Last Ack Core.vi. The idea is that within Stop Core.vi, I send Stop Msg to each of the nested actors and then make it wait indefinitely on the internal notifier. Within Handle Last Ack Core.vi, I make it send a notification using this notifier which allows Stop Core.vi to continue and perform deinitialisation for the top-level actor itself. Figures 1 & 2 below show this approach. I wasn't confident that this would work since it assumed that it was possible for Stop Core.vi to execute and then Handle Last Ack Core.vi to concurrently execute some time after. These assumptions didn't hold and it didn't work. It would have been messy even if it had.
Overriding Stop Core.vi, making it send Stop Msg to each nested actor and then waiting for an arbitrarily long period of time (100ms, 200ms, etc.). What if a nested actor takes only 10ms to shut down? What if takes 400ms?
The figures below show how I implemented the second approach. Ignore the broken object wires - they only appear that way in the snippets.
Figure 1 - Stop Core.vi from the second approach
Figure 2 - Handle Last Ack Core.vi from the second approach

tst wrote:
It wasn't that hard to find - https://decibel.ni.com/content/thread/27138?tstart=0
But with dozens of posts, I have no intention of rereading it now.
Also, when crossposting, it's considered polite to add a link, so that people can see if the other thread has relevant replies.
Thanks. I've only read the first page for now but I find this interesting (I'm not sure how to format non-reply quotes, sorry):
"AristosQueue wrote:
CaseyLamers1 wrote:
I think that this would be a nice addition. I think how a program stops is just as important as how it starts.
I think everyone who has worked on AF design agrees with this. Indeed, managing "Stop" was *the* thing that lead to the creation of the Actor Framework in the first place. The other issues (deadlock/hang avoidance and resource management) were secondary to just trying to get a clean shutdown.
CaseyLamers1 wrote:
I find the current code a bit lacking.
My concern would be that the mixing of a verified stop and a regular stop could create confusion and lead to people having trouble during editting and testing with the project ending up locked (due to VIs left running which did not shutting down).
Your concern is to some degree why no verified Stop exists in the AF already. We looked at each actor as an independent entity, and left it open to the programmer to add an additional managment layer for those applications that needed it. But over time, I have seen that particular management layer come up more often, which is why I am exploring the option."
So that gives one of the reasons why this hasn't already been implemented but also points out that it's something quite a lot of people want.
> Also, when crossposting, it's considered polite to add a link, so that people can see if the other thread has relevant replies.
Noted. Here's the discussion: https://decibel.ni.com/content/message/104983#104983
Edit: since there doesn't seem to be any NI-provided way of doing this yet, I suppose I'll try rolling my own at some point. The ideas posted in the discussion you linked seem pretty useful.

How to find table name which provide data for the DataSource

Hi friends,
How to find the Table name which providing data for the Business content DataSources (Master Data). Is there any table or Transation which give datasource and Table name at once.
Thanks&Regards
Revathi

Hi Revathi...........
1)If the datasource is extracting data from any table.................open the datasource using RSO2..........there u will get the table name......
2) If the datasource is extracting data from any view.............go to RSA2..........copy the view name..........go to SE11 >> give the view name >> and check..........
3) If Datasource is Function module based............then u hav to check in RSA2 >> give the datasource name >> execute >> there u will find the Extract structure name......Copy the Extract Structure name >> Go to SE11 >> in the Data Element field give the Extract structure name >> Display >> From the Entry Help/Check tab u can get the Table name............
If u double click on the Extractor..............u will get the Function Module..............from there also u can check that the FM extracting data from which tables............
For Other datasources also...........u can get the structure name from here........
4) If the Datasources r LO datasources............then u can get the table name in LBWE.............LO extractor - goto transaction LBWE.................... Select the maintenance link for your datasource............
here in the right hand pane.........in the drop down box, you can see the structures associated with this extractor ........ just remove the MC for the structure names to get the base table names. e.g. EKKO for MCEKKO.
5) There is a pattern for the Extract structure name for LO datasources.............for an example..........
DataSource 2LIS_11_VAITM ......Extract structure name is MC11VA0ITM
2LIS_11_VAHDR >> MC11VA0HDR
Hope this helps.........
Regards,
Debjani.......

How to make a multiple request without waiting for a response in java ?

A more specific question:
how to make a multiple HTTP request without waiting for a HTTP response in java (using httpURLConnection)?
Thanks

Thanks for responding.
But i want to make further request to the same resource URL. I want to reuse the connection, don't want to create a new connection for each of individual request.
How can i do that using HttpURLConnection ?
Thanks.

How to handle archives messages in Msgs waiting for Acknowledgement

Hi folks
If i have a async process in BPM whcih is having status set "Processed successfully" but the BPM has actually spawned a WAIT for a transport acknowledgment(from file adapter), how do I handle archving/deletion for this msg??
Any filter i set in SXMB_ADM will count in such msgs too..how do we work around the scenario?

Hi Sriram,
>>>The missing link here is the Adapter status is not considered by ccBPM in deciding the process status..
I think you're right I'd like to know a little bit more about this too
If you decide to post it as an OSS message please
update this thread so that we'll all know in the future:)
Thx in advance,
Regards,
michal

How to Cancel a PO which is waiting for Apprval.

Similar Messages

Maybe you are looking for