How to capture repository tables ?

I would like to make a table diagram showing the actual repository tables, the SDD_.. tables. In that way I could easier make queries on the repository tables.
However, if you try to capture the server model from database and login as the repository owner you only see a small fraction of user_tables. Where's the rest ? None of the SDD_ tables show up. Is there some filter blocking it ?
Same goes for the CI_ views.
Ta,
Mark.

One suggestion: check the roles of that user. You need to have access to those SDD_* tables so, within the "object privileges granted" folder below that user's roles folder, at least one of them has to have the "select on repositoryownerschemaname.SDD_whatever"
Hope this helps!
Cheers,
Ana

Similar Messages

How to capture the table update

How to capture the table update.Suppose I delete a enrtry from the table or mofying any entry in a table is there way to capture that update in SAP?

hi ,
follow these steps:
1. After you selecte the search help for New Responislbe person, domodify gets triggered.
2. In the wddomodify, get the value of New Responsible person by reading the attribute binded to it.
3. Now if Value entered is not initial, write a selecte query to fetch the name based on pernr no.
4. Finally bind the name fetched with the attribute binded to New Responsible person name.
Wdomodify :
************* *Read the New REsponsible person Pernr* ***********
DATA lo_nd_cn_sflight TYPE REF TO if_wd_context_node.
DATA lo_el_cn_sflight TYPE REF TO if_wd_context_element.
DATA ls_cn_sflight TYPE wd_this->element_cn_sflight.
DATA lv_carrid LIKE ls_cn_sflight-carrid.
* navigate from <CONTEXT> to <CN_SFLIGHT> via lead selection
lo_nd_cn_sflight = wd_context->get_child_node( name = wd_this->wdctx_cn_sflight ).
* get element via lead selection
lo_el_cn_sflight = lo_nd_cn_sflight->get_element( ).
* get single attribute
lo_el_cn_sflight->get_attribute(
    EXPORTING
      name = `PERNR`
    IMPORTING
      value = lv_carrid ).
****** *Check whethre a value has been entered in PERNR* *************
if lv_carrid is not initial.
*************Select Name based on pernr entered* ***********
select ename from pa001 into lv_ename where pernr = lv_carrid.
*******Set the Name atttribute with the ename value fetched* *****
lo_el_cn_sflight->set_attribute(
      name = `NAME`
      value = lv_cename ).
endif.

How to capture - Custom tables change log

Hi,
I need to maintain the change logs for Cutom tables. But, my custom table contains the fields with data type DEC. So, i am getting the record as "####" for DEC fields.
These values, i have captured in Table Maintenance generator Flow Logic Editor - In the loop of EXTRACT or TOTAL.
PROCESS AFTER INPUT.
MODULE LISTE_EXIT_COMMAND AT EXIT-COMMAND.
MODULE LISTE_BEFORE_LOOP.
LOOP AT EXTRACT.
ENDLOOP.
So, can you please help me to find the solution?
Regards,
Srinivas
200AR99#u200C###### MUKKAVILLI 20090728
200AT02###u200C#### MUKKAVILLI 20090731

Hi,
Please refer to the following link
http://www.saptechies.com/how-to-activate-the-img-change-log/
Track Table chnages
Hope this helps.
Regards,
Swetha

How to Capture a Table with large number of Rows in Web UI Test?

HI,
Is there any possibility to capture a DOM Tabe with large number of Rows (say more than 100) in Web UI Test?
Or is there any bug?

Hi,
You can try following code to capture the table values.
To store the table values in CSV :
*web.table( xpath_of_table ).exportToCSVFile("D:\exporttable.csv", true);*
TO store the table values in a string:
*String tblValues=web.table( xpath_of_table ).exportToCSVString();*
info(tblValues);
Thanks
-POPS

How to capture the row value in Advanced Table on OAF ?

Hi:
I was wondering, if anyone has any idea as to how to capture a row value on an advanced table on a OAF Page.
I am currently trying to capture the Expense Report Number ( first column) on the Track Expenses Reports table on the page /oracle/apps/ap/oie/webui/HomePG.
Any idea would be helpful ?
Thank You

Hi,
856070 wrote:
This is what I am looking for :
Default Functionality
On the expenses home page there is a table for the Submitted expenses Table ( advanced table) with multiple Expense Number rows , which has a link associated with every expense number. When the user clicks the expense number link , EBS takes you to a more detail information page. ---As per default functionality :::whene ever user clicks on link it will takes u to details info page based expense no right.
---Check the property of the Destination URL of the ExpensionNumber column.
---In this property u can find the page path and paramam ex:pexpencenumber.
Customized functionality
I would like to capture the Expense number on the detailed page to call another application based on the expense number. The expense number on the
detailed page is not available on the request-parameter or on the VO.
I was thinking of capturing the ExpenseNumber when the user clicks it and save the expense number on a >transientvalue to retrieve it on the detaile dpage..but unable to do so.---Here get the paramereter pexpencenumber and pass it to another appilcation.
Regards
Meher Irk

How to capture multiple change in webDynPro(ABAP) Table

Hi ,
I would like to know 'How to Capture Multiple Change' of a node . For example , a table is bound to a node and I select Multiple entries in the table . Then, how to capture Multiple entries of the table . Is there any method ?
There is a method 'GET_CONTEXT_CHANGE_LOG' of 'if_wd_context' which captures single change of the node .
Regards
Sid

Post this in Webdynpro forum at
Web Dynpro Java
have you seen these tutorials.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3133474a-0801-0010-d692-81827814a5a1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4c70444a-0801-0010-7688-9e4bd844b783
Regards
Raja

How can I create a universe with the BO repository tables?

Hi. I need make a universe with the BO repository tables, in order to get user information .
But, when I try to insert tables in designer, using a new conecction to BO repository. I can't see tables.
Someone can help me?

The CMS repository is organized into both physical and virtual tables. Only the CMS can access the virtual tables, therefore you cannot create a universe on the CMS repository. You can access the CMS repository information through the Enterprise SDK.
https://www.sdn.sap.com/irj/boc/businessobjects-sdklibrary

How add capture schema level to existing table level capture

I have setup Oracle Streams 2 databases( oracle 10.2.0.4 windows 2003) 2-way replication. Database A capture 55 tables and database B capture 32 tables from same schema.
I need add one more database C (oracle 11.1.0.7 rac windows 2003); replicate whole schema level from database A;
What sould I do?
Add new schema level capture process on database A?
Can I drop current capture table level on database A and create schema level capture and use different propagation?
Please help

Better use 2 differents captures and 2 differents propagations, specially since on the of the capture is bi-directional.
When troubles will come, you will be happy of this separation, Also if something special is requested, you will be confortable with the implementation and sure that no side effects on the other capture. But the ease of maintenance, the different FIRST_SCN, will make your life better.
Remember that a propagation that goes always from A-->B, you can remove the rule set. In this case everything that enter A goes to B.
So is it better to do
A -> rules |-----> B
             |-----> Cor not proagation rules :
    A ---> B
    A ---> CI vote for the second.

How to get source table name

Hi,
I need to know how get a source table name. I need to get a source table name and do some transformation. I am adding the step in IKM to do this and therefore need source table name in there.
<%=odiRef.getSrcTablesList("","[RES_NAME]","","")%> gives work table name (C$_0XXXXX) whereas actual source table name is expected.
Could someone please help?
Thanks.

Hi,
May i add a point?
In IKM level, if u use this API it will always return u C$ table name only since for IKM C$ is the source. You need to capture and use this API in LKM level.
In LKM add a step in Command on target and technology as Jython and try the below code.
mySourceTable= '<%=odiRef.getSrcTablesList("", "[RES_NAME]", ", ", "")%>'
And later in IKM use this variable for ur transformation.
Thanks,
Guru

How to capture the values given in SSC1 transcation?

Hello All,
Can anyone suggest me, how to capture the values given in SSC1 transaction?

Hello Clemens Li,
Requirement: Integration of SAP Appointment Calendar with Gmail Calendar
If I create an appointment in SSC1 transaction, it will appear in SAP Appointment calendar. The same thing should get updated in Gmail calendar of SAP user and also in the guest Gmail calendar if exists in appointment.
So, I have to capture the input values given in SSC1 transaction while creating an appointment in SAP and try to export those values to web services using some function module. Sending those values to web services completes my task.
Means, if I create an appointment in SAP, at the same time, the values which I gave must get exported to some object. So that I can send them to web services.
But my actual problem is with capturing the input values given to SSC1 transaction.
How can I get those values out to some internal table?
Another one is, I did not found any BADI to enhance SSC1 transaction so that I can include my code there.
If you know any enhancements in SSC1, please let me know.
If you want any more clarification, please let me know.
Thanks for the response
DNR Varma

How to capture the Logout time in xMII

Hi Friends,
How to capture the logout time in xMII when the user clicks on Logout link
Thanks

Srikanth,
It would be better to use a database table(s) to store your audit trail information than an xml file, which could grow beyond a manageable size and then require housekeeping efforts and file rolling, etc. It would also be much easier to query user related information out of the logs, pareto charts for failed vs. successful login attempts, etc. if the data was stored in a database.
Have you considered modifying the Relogin.jsp page link in the portal's sub-menu bar? How about making your own version of this web page and changing the link pointer? Keep in mind that whatever result you come up with here will need a significant update for NetWeaver UME compatibility in version 12.0.
Regards,
Jeremy

How to capture the data entered in a textfield in a JTable

How to capture the data entered in a textfield present in a cell of a textfield or how to add listener to this textfield

A sample of my code is:
          model = new GridDisplayTableModel(gridDisp,columnName,getRows(),getCols());
          final ComboRenderer cRenderer = new ComboRenderer();
          final TextFieldRenderer tRenderer = new TextFieldRenderer();
          combo.addItem("one");
          combo.addItem("two");
          combo.addItem("three");
          final JTextField textfield = new JTextField();
          final DefaultCellEditor cmbEditor = new DefaultCellEditor(combo);
     //     final JEnterDataCellEditor textEditor = new JEnterDataCellEditor(12);
          final DefaultCellEditor textEditor = new DefaultCellEditor(textfield);
          rm = new RowEditorModel();
          table = new JTable(model){
     public TableCellRenderer getCellRenderer(int row, int column) {
          int posx = 0;
               int posy = 0;
               TableCellRenderer renderer = null;
     for(int l=0;l<getDataVec().size();l++)
               beanObj =(Helperbean)dataVec.elementAt(l);
               posx = beanObj.getPosx();
               posy = beanObj.getPosy();
               if(row==posx && column==posy)
                         if(beanObj.getModeofDisplay() != null && beanObj.getModeofDisplay().equalsIgnoreCase("textfield"))
                              rm.addEditorForRow(row,textEditor);
                              renderer = tRenderer;
                         else if(beanObj.getModeofDisplay() != null && beanObj.getModeofDisplay().equalsIgnoreCase("combo"))
                              rm.addEditorForRow(row,cmbEditor);
                              renderer = cRenderer;
                         break;
                    renderer = super.getCellRenderer(row, column);
          //     System.out.println("getEditor"+rm.getEditor(1));
     return renderer;
public TableCellEditor getCellEditor(int row, int col) {
     int posx = 0;
     int posy = 0;
     TableCellEditor tmpEditor = null;
for(int l=0;l<getDataVec().size();l++)
     beanObj =(Helperbean)dataVec.elementAt(l);
     posx = beanObj.getPosx();
     posy = beanObj.getPosy();
     if(row==posx && col==posy)
               if(beanObj.getModeofDisplay() != null && beanObj.getModeofDisplay().equalsIgnoreCase("textfield"))
                    System.out.println("celleditorval "+textEditor.getCellEditorValue());
                    tmpEditor = textEditor;
               else if(beanObj.getModeofDisplay() != null && beanObj.getModeofDisplay().equalsIgnoreCase("combo"))
                    tmpEditor = cmbEditor;
               break;
          tmpEditor = super.getCellEditor(row, col);
return tmpEditor;
public boolean isCellEditable(int row,int col){
     boolean isEditable = false;
     int posx = 0;
     int posy = 0;
for(int l=0;l<getDataVec().size();l++)
     beanObj =(Helperbean)dataVec.elementAt(l);
     posx = beanObj.getPosx();
     posy = beanObj.getPosy();
     if(row==posx && col==posy)
          if(beanObj.getModeofDisplay() != null )
                    isEditable = true;
               else
                    isEditable = false;
               break;
     isEditable = false;
     return isEditable;
public void changeSelection(final int row, final int column, boolean toggle, boolean extend) {
     super.changeSelection(row, column, toggle, extend);
     //my attempt to avoid editCellAt from being called twice in a row
     if (getModel().isCellEditable(row, column) && !(isEditing() && getEditingRow() == row && getEditingColumn() == column))
          if (editCellAt(row, column)) {
               getEditorComponent().requestFocus();
     // Select the text when the cell starts editing
public boolean editCellAt(int row, int column) {
     boolean result = super.editCellAt(row, column);
     final Component editor = getEditorComponent();
     if (editor != null && editor instanceof JTextField) {
          SwingUtilities.invokeLater(new Runnable() {
               public void run() {
                    ((JTextField)editor).selectAll();
          return result;
     public boolean hasFocus()
          Component editorComponent = getEditorComponent();
          // Try to install the editor
          int anchorRow = getSelectionModel().getAnchorSelectionIndex();
          int anchorColumn = getColumnModel().getSelectionModel().
          getAnchorSelectionIndex();
          if (anchorRow != -1 && anchorColumn != -1 && !isEditing())
          if ((this.getSelectedRow() == anchorRow) && (this.getSelectedColumn() == anchorColumn))
          if (!editCellAt(anchorRow, anchorColumn)) {}
          return super.hasFocus();
     public void valueChanged(ListSelectionEvent e)
          super.valueChanged(e);
          if ((this.getSelectedRow() == 2) && (this.getSelectedColumn() == 3))
               DefaultFocusManager focusManager = new DefaultFocusManager();
               focusManager.focusNextComponent(this);
               model.fireTableStructureChanged();

How to Capture the Objects in Object Library in Openscript tool?

Hi All,
I am new to OATS and i was trying to explore the Object Library in Opencript tool.
Can anyone please advise me how to capture the Oracle forms Object in Object Library or Object Repository using OpenScript Tool?
It would be grateful,If you can provide me the step to follow for the above.
Thanks
Ajith

Hi Ajith,
Create one Object Library. In OpenScript click File -> New -> Select Object Library under Script Assets.
Then mention name of your library and save it.
Add this library to script assets of your script. Select Script -> Script Properties... -> Script Assets -> Object Library -> Add(button) -> select your Object Library.
Then save your script and start recording. After recording you can see xpath of all objects you interacted with during your script recording.
If you want to apply this to your script, select Script -> Apply Object Library.. -> then select your Object Library. If you want to revert it, then select Script --> Revert All Navigation To Recorded
Hope this will help you...
Regards,
Deepu M

How to capture the changes in ppoma_crm transaction

Hello All,
We have a requirement that if we add either a BP or an User to a positon in ppoma_crm transaction then we should be able to update these entries in our z table.
If it is a BP then we should look for the User mapped to it and update the z table else we should directly update the z tables with user name.
But we are facing an issue in capturing the values that have been updated.
Can anyone tell me how to capture the new values in the BADI for the ppoma_crm transaction ?
Regards
Sohit

Did any guys here face the requirement? If replicating all the columns some of which may change frequently but are not important to the other sites, then i wouldn't replicate these changes in order to improve the performance. Thanks for your help!

How to capture Exception error message in Odata ?

Hi,
I am new to sap gateway. Currently i am creating a Odata Service through the transaction SEGW. In the query i have mapped a RFC. When i execute the service sometimes the RFC throws exception like 'No data Found'. But i dont know how to capture the exception returned from the RFC.
I read some threads which says use
RAISE EXCEPTION TYPE /IWBEP/CX_MGW_BUSI_EXCEPTION
      EXPORTING
        textid            = /iwbep/cx_mgw_busi_exception=>business_error
        message       = lv_text
        message_container = io_message_container.
My doubt is since i have not done any code in the DPC method. As said in many threads should i go to DPC_EXT method and redefine the method or how to capture the exception.
Kindly advise. Thanks in advance

Hello Velsankar,
You need not to capture the error messages explicitly by writing custom code in you DPC_EXT if you are using service builder when the return error message table is of type BAPIRET2.
GW itself will handle and return the error messages.
If at all the return error message table is of different type , i mean to say if it is not of type BAPIRET2 then you need to capture explicitly.
The below is the code you need to write in DPC_EXT to capture.
DATA: LO_MECO TYPE REF TO /IWBEP/IF_MESSAGE_CONTAINER.
DATA: LX_BUSI_EXC TYPE REF TO /IWBEP/CX_MGW_BUSI_EXCEPTION.
        LO_MECO = MO_CONTEXT->GET_MESSAGE_CONTAINER( ).
         LO_MECO->ADD_MESSAGES_FROM_BAPI( IT_BAPI_MESSAGES = LT_ERR_RET_TAB ).
         CREATE OBJECT LX_BUSI_EXC
           EXPORTING
             MESSAGE_CONTAINER = LO_MECO.
         RAISE EXCEPTION LX_BUSI_EXC.
Note : where LT_ERR_RET_TAB is your internal table where you would have captured all the error messages.
That is it. You will be able to see the messages .
Regards,
Ashwin

How to capture repository tables ?

Similar Messages

Maybe you are looking for