How to change Access Mode of HANA Stored procedure

Hi,
When you are creating a stored procedure as design time object, one of the option is access mode (either read only or read/write).
I understand read only is default setting in HANA DB, and unless you explicitly change the setting you cannot read/write using stored procedure.
My question is, is there way to change this setting, so I have option to choose either read or read/write when I create a stored proc?
Thank you.
Hyun

Hi Hyun,
Please have a look on this thread:
Create local temporary table in procedure
You have to enable sqlscript_mode to UNSECURE as mentioned by lars.
Then depending on whether you are specifiying "READS SQL DATA" it will act as a READ procedure else as a WRITE procedure.
Regards,
Krishna Tangudu

Similar Messages

  • How to change lost mode passcode ? pls help

    how to change lost mode passcode ? pls help

    Hello Erkhes,
    You'll need to take the device to an authorized service center or Apple Store to restore access to your device.
    Note:   If you forget the passcode, or if you set an EFI firmware password on your Mac before it was lost, then lock it and later find it, you may need to take it to an authorized repair center to unlock it.
    iCloud: Use Lost Mode
    http://support.apple.com/kb/PH2700
    Cheers,
    Allen

  • Is there api function to change access mode and set a passcode to recording in meeting?

    Is there api function to change access mode and set a passcode to recording in meeting?
    When I'm trying to use "action=acl-field-update&acl-id=SCO_ID_RECORDING&field-id=meeting-passcode&value=MY_PASSC ODE" it just clean the password and do not set it or change.
    And "action=permissions-update&acl-id=SCO_ID_RECORDING&principal-id=public-access&permission- id=view-hidden" do not work too.

    There is not a specific API for doing this. This was discussed in the other Connect forum here, Adobe Connect User Community.
    For you call I would make the second part differently. Instead of 'field-id=meeting-passcode&value=MY_PASSCODE' I would call 'meeting-passcode=MY_PASSCODE' and see if that worked better.

  • How to change access point name

    Need to know how to change access point name for straight talk on iPhone 4

    There are several other threads here about doing this, or you can look up the "sim swap" method, documented here: http://www.jgmedia.biz/how-to-get-data-and-mms-working-on-straight-talk-iphone-4 -and-iphone-4s-on-ios-6-updated-sim-swap-method/. This does require temporary access to a T-Mobile or Simple Mobile SIM/Micro-SIM card.

  • How do you access iCloud (non-Pages) stored documents on iCloud

    How does one access iCloud (non-Pages) stored documents on iCloud? Only iWork shows up.

    iCloud does not provide general file storage: only iWork docucuments (at the moment) will upload to iCloud for access by other devices/computers. There aren't any other documents stored up there.

  • Now my iphone 6 has restoring mode, how to change normal mode?

    now my iphone 6 has restoring mode, how to change normal mode?

    Do you mean it's in recovery mode? If so, you have no choice but to restore it using iTunes.

  • How to execute multiple queries in one stored procedure.

    Hi,
    I am Kumar,
    How to execute multiple queries in one stored procedure.
    here is the my requirements,
    1. get the max value from one table and sum of the that value.
    2. insert the values and also sum of the max value.
    using stored procedure
    I am using SQL server 2000 database.
    Please help me.
    Advance thanks
    by,
    Kumar

    This is not a java question and it is not even a problem: your only problem is
    1) lack of knowledge
    2) lack of interest to find a manual
    But you are going to have to change both by actually reading a book or a manual that explains the stored procedure language of SQL Server. It is the same as Sybase I think, so you could also look for a manual for that DBMS.

  • Command for "How to find Cursor Size" in Oracle Stored Procedure"

    Hi
    Can u tell me....
    How to find Cursor Size" in Oracle Stored Procedure........
    I want command for that........

    why don't you try select count(*) from your_table;That requires running the same query twice - or rather running two different queries twice. Besides it still doesn't guarantee anything, because Oracle's read consistency model only applies at the statement level (unless you're running in a serialized transaction).
    This is such a common requirement - users are wont to say "well Google does it" - it seems bizarre that Oracle cannot do it. The truth is that that Google cheats. Firstly it guesses the number on the basis of information in its indexes and refines the estimate as pages are returned. Secondly, Google is under no onus to kepp all its data and indexes synchronized - two simultaneous and identical queries which touch different Google servers can return different results. Oracle Text works the same way, which is why we can get a count with CTX_QUERY.COUNT_HITS in estimate mode.
    Cheers, APC
    blog: http://radiofreetooting.blogspot.com
    .

  • How to pass the parameter of a stored procedure to iReport

    Hi... i don't know how to pass the parameter of the stored procedure to the iReport.
    In the Report Query, i tried
    1. sp_storedprocedure ' value'
    2. sp_storedprocedure +''''+$P{parameter}+''''+
    3. sp_storedprocedure +$V+$P{parameter}++$F($F is a variable having a value of ' (a single quote))may you enlighten us please? thank you

    For M$ SQL server I find that it only works when U use the fully qualified name...
    e.g. catalod.dbo.my_procedure_name 'variable'
    My full query in the Report Query window is something like this:
    EXEC arc.dbo.jasper_Invoice 1000
    Note that you may find that selecting from VIEWS / TABLES fails for no apparent reason and iReport will prompt you with the usual very unhelpful (we have what we "pay" for) prompt, stating that "The document is empty".
    To work around this issue, where a statement like "SELECT * FROM arc.dbo.acc_invoices WHERE Invoice_id=1000" does not work, simply create a PROC, something like:
    CREATE PROC jasper_MyProc (@my_rec_id integer) AS
    SELECT * FROM arc.dbo.acc_invoices WHERE Invoice_id= @my_rec_id integer
    ...to wrap your SELECT statement, then call the PROC
    Edited by: Sylinsr on Apr 22, 2008 4:23 PM

  • Write back to BW cube through HANA Stored Procedure?

    Hi ,
    I am looking for a way to write back to BW cube using HANA stored Procedure and not use the traditional approach
    where we fetch the data as output using stored procedure and write that to BW cube using traditional write back approach .
    Is it possible to write back to cube considering it is not a flat structure using simple insert sort of statement which we can do with DSOs?
    Best Regards,
    Rakesh

    Yepp exactly. Before the insertion all characteristic values are converted to SID-s.
    The reality however is not that simple, since many checks are done during the cube update. One of these is the time consistency check, which checks if the data for the time dimension is consistent or not. In case of non-cumulative scenarios this is essential.
    As of now, its not possible to check this purely with DB tools and therefore there is no stored procedure available to do this from DB level directly. For the same reason its not possible to use HANA executions on DTP-s whic has cubes as a target.

  • Hi i am using oracle 10g how to view the content of the stored procedure or trigger ?

    Hi i am using oracle 10g .How to edit  the content of the stored procedure or trigger ?

    jklopkjl wrote:
    Hi i am using oracle 10g .How to view the content of the stored procedure or trigger ?
    query ALL_SOURCE
    SQL> desc all_source
    Name                                      Null?    Type
    OWNER                                              VARCHAR2(30)
    NAME                                               VARCHAR2(30)
    TYPE                                               VARCHAR2(12)
    LINE                                               NUMBER
    TEXT                                               VARCHAR2(4000)

  • HANA Stored Procedure in SAP Design Studio

    hi there,
    I developed a HANA stored procedure, I want to implement this procedure in SAP Design Studio. following scenario:
    if Button Click, the Procedure is executed and the result of this Procedure is shown in a crosstab.
    I can maybe help someone, maybe someone has tried something similar.
    Thank you 

    hi,
    I developed in Hana a calculation view with script, cfr stored procedure, this view I can use as a datasource in my SAP Design Studio.  The loading of your datasource can be triggered by your button:  set datasours load in script true, radiobutton event: DS_1.loaddatasource ();
    Is this work around okay for you.
    Greetings
    Koen

  • Is it possible to return a cursor as a HANA Stored Procedure OUT parameter?

    Hi,
    I have a use case where I need to return a record set from a HANA Stored Procedure to the caller based on a couple of input parameters to the procedure. However, the record set needs to be dynamic and may have different columns based on the input parameters.
    I could achieve this by creating hdbstructures or using table types as OUT parameters. However, is it possible to return a cursor holding the result set of a SELECT query as an OUT parameter for a HANA stored procedure?
    (I am looking for something similar to Oracle's SYS_REFCURSOR)
    Best Regards,
    Abhik

    Did you try using EXECUTE IMMEDIATE
    Have a look on this:
    SAP HANA: Handling Dynamic Select Column List and Multiple values in input parameter
    Regards,
    Krishna Tangudu

  • How to pass an array to a stored procedure

    create or replace package demo_pkg
    as
    type cityArray is table of city%rowtype index by binary_integer;
    procedure city_report( p_inputs in cityArray );
    end;
    CREATE OR REPLACE PACKAGE BODY demo_pkg
    AS
    PROCEDURE city_report (p_inputs IN cityarray)
    IS
    BEGIN
    FOR i IN 1 .. p_inputs.COUNT
    LOOP
    DBMS_OUTPUT.put_line ( 'citycode = '
    || p_inputs (i).city_code
    || ' CITYDESCRIPTION = '
    || p_inputs (i).city_description
    INSERT INTO testing
    (city_code, city_description
    VALUES (p_inputs (i).city_code, p_inputs (i).city_description
    commit;
    END LOOP;
    END;
    END;
    to call that procedure ia m using this
    declare
    my_data demo_pkg.cityArray;
    begin
    my_data(1).city_code := 1234;
    my_data(1).CITY_DESCRIPTION := 10;
    my_data(2).city_code := 4567;
    my_data(2).CITY_DESCRIPTION := 20;
    my_data(3).city_code := 4321;
    my_data(3).CITY_DESCRIPTION := 30;
    demo_pkg.city_report( my_data );
    end;
    but actually the procedure (demo_pkg.city_report)is called from front end(.net).how they will call this procedure in .net invironment

    Hi,
    Your exact question has been asked before, see: http://asktom.oracle.com/pls/ask/search?p_string=How+to+pass+an+array+to+a+stored+procedure
    or do a search on this forum.
    And please use this tag => (yes, just the 4 characters forming the word 'code' between curly brackets)
    *before* and *after* your example to maintain formatting and indentation, it's hard to read now....                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • How to work on Data Analysis using Stored procedures

    How to work on Data Analysis using Stored procedures any suggestions 

    Carefully?  Precisely?  Tomorrow?  Your question has no context so it means little to an outside reader. Perhaps you should start with some basic research into the data mining features of sql server:
    data mining homepage

Maybe you are looking for

  • Change the default language in AM

    Hello, We are using Lookups in our application which stores the locale specific information. We have a drop down in the UI which will give the language names like 'American English', 'Canadian French' etc. When chosen 'Canadian French' we need to cha

  • WVC54G Audio & email alert Dropdown grayed out

    I have not used the camera in a few years. Pulled it out recently and everything was working great. Went to change the area that the camera monitors for motion and both audio/email dropdowns are grayed out. They were there initially while I was getti

  • Query in output of sh interface

    Hi all, I have a query in output of sh interface on ASA. On ASA's when we do 'show interface' for a gig interface, we can get any among two, input queue (blocks free curr/low): hardware (255/230) output queue (blocks free curr/low): hardware (255/0)

  • AirPort Base Station disk username and password not working

    I got a new AirPort Base Station the other day and everything worked fine until I started to set up the networked disk. On my mac it works fine, it just pops up when I connect to the network ( woot for macs ). On my windows it asks for the username a

  • Reduce advanced search criteria LOV

    I have created OAF page with resultsBasedSearch = advanced panel Query Region. In advanced search criteria, I see four values in LOV - "is, is not, after, before". I want to limit options to "is" and "after". Is it possible to do this? If so, can you