How to change optimised hidden parameters in Oracle 10g.
Hello Gurus,
SAP suggested me to change the following parameter values in Oracle database. But I am unable to make change in this parameter.
The parameters are mentioned as below.
Name
1> btree_bitmap_plans
2> sortelimination_cost_ratio
3> optimizermjc_enabled
I am unable to check the current values and chnge it to new value. So please suggest me the proper way to change this parameters.
Regards,
Jayendra.
Hello,
if you use an SPFILE you can use the following command:
alter system set "<underscore_parameter_name>" = <value> scope=spfile;
In case of init<sid>.ora you just specify the parameters in the file itself:
<underscore_parameter_name> = <value>
Regards
Martin
Similar Messages
-
How to change timeout parameter value in Oracle 10g R2
Anyone knows how to change timeout parameter value in Oracle 10g Database R2?
Waheed Azhar wrote:
actually i am getting ORA-01013 exception which directly relates to the timeout value but i think it's hidden parameter...What makes you think it's a hidden parameter?
A search of MetaLink for that error turns up a number of hits, most of which a very situational specific. Exactly what are you doing when you get this error? Are you connecting over an ODBC connection? Are you getting it on a connection request? At db shutdown? During a long-running query? -
How to change redo log size in oracle 10g
Hi Experts,
Can anybody confirm how to change redo log size in oracle 10g?
AmitDear Amit,
You can enlarge the size of existing Online Redo log files, by adding new groups with different size of files (origlog$/mirrlog$) and then carefully droping the old groups with their associated inactive files.
Please refer SAP Note 309526 - Enlarging redo log files to perform the activity.
Steps to perform:
STEP-1. Analyze the exisiting situation and prepare an action plan.
A. You have to ensure that no more than one log switch per minute occurs during peak times.
It may also be necessary to increase the size of the online redo logs until they are large enough.
Too many log switches lead to too many checkpoints, which in turn lead to a high writing load in the I/O subsystem.
Use ST04 -> Additional Functions --> Display GV$-Views
There you can select
Gv$LOG_HISTORY --->for determing your existing LOG switching frequency.
GV$LOG -
> list the status(INACTIVE/CURRENT/ACTIVE) /size/sequence no. of existing online redolog files
GV$LOGFILE --- > list the information of existing online redolog files with their storage paths
You can document the existing situation of Online Redo Log Fiile management before going to enlarge Redo Log Files.
It will be helpful, if something goes wrong while performing activities.
B. Based on above Situation analysis, Plan your New Redo Log Group and there Members with new optimal size.
e.g.
Group No. Redo Log File Locations u201C/oracle/<SID>/u201D Size
/origlogA /mirrlogA
15 log_g15m1.dbf log_g15m2.dbf 100 MB
17 log_g17m1.dbf log_g17m2.dbf 100 MB
/origlogB /mirrlogB
16 log_g16m1.dbf log_g16m2.dbf 100 MB
18 log_g18m1.dbf log_g18m2.dbf 100 MB
Continue to next..... -
How we create new data base in oracle 10g express edition
hello every body.. i student of B tech n new user of oracle so please help me how we creat new data base in oracle 10g express edition
Hello, Oracle XE can not create more than one instance, the other editions yes, but like other editions XE allows you to create database schemas, schemas logically grouped objects like tables, views, indexes created by a user. By creating an Oracle user is associated with a schema of the same name.
Using SYS or system accounts for creating user accounts.
Syntax to create a user:
create user Your_user
IDENTIFIED BY password
default tablespace users;
grant connect, resources to your_user;
Edited by: rober584812 on Jun 25, 2010 9:03 PM -
How do we find instance name in ORACLE 10g
Hi All,
How do we find SID name in Oracle 10g
Thanks in advance
PandiarajanApology accepted.
But yes, of course I was harsh (not at you, actually, but at the plonker who thinks he can tell me that 'echo $something' is "not right").
Do you know how many questions could be answered here if people weren't forever debating perfectly acceptable answers? If people actually stopped to read what had been written before deciding to add their tuppence-worth? If people stopped to think, "well, that's not how I would answer it... but it's good enough".
I see so many threads here where 58 people dive in to a thread to say, 'Me too'. Another 42 will dive in to say, 'that's not right' when actually it is. And another 137 or so will usually chime in to say nothing very much except to demonstrate that they didn't understand something that was explained a lot earlier on quite clearly. Threads go on and on, when actually all that was sought originally was a simple answer to a technical issue. God knows why it happens.
I have no problem at all being asked for clarification. I have no problem at all being corrected and having someone point out that actually that parameter doesn't exist, you made a typo, that's not the command to achieve X. When I am technically wrong, I would expect nothing less. But where so much of my time gets wasted is demonstrated in this thread perfectly. I answered the question in one post. It might not have been a perfect answer. There are many different ways of coming up with the answer on Windows, for example, and yet I didn't mention the registry at all or the Control Panel/System applet for checking environment variables once. And yet, despite all of that, in answer 1 there was sufficient information to make the OP happy. But no, that's not enough to shut some people up (and I am again not referring to you at this point).
I don't know what it is. Some sense of, maybe, in a democracy my opinion is as good as yours even if it's entirely unnecessary, potentially confusing and adds absolutely nothing to the outcome? A desire on the part of some people to boost their post numbers?
Too right I'm harsh. I am results-driven. I am here because I want to help others. Not because I think my opinions deserve a hearing even though the answer was posted ages ago. When I see something that looks like the opposite of that -grandstanding, look how clever I am, my opinion counts too- yeah, it annoys me somewhat. And largely because I usually end up having to untangle the confusion caused by unnecessary "contributions" from others. -
How to access Data Guard option in Oracle 10g OEM
Hi All,
I have Oracle 10g ENTERPRISE EDITION on Unix envoirement. I want to setup logical standby Database through Data Guard technology. But when I brows through OEM I do not find Link for DATA GUARD????
1) How to access Data Guard option from oracle 10g OEM.
2) Does It come with Enterprise Edition OR I have to install it separately.
Regards,
DarshanI am managing almost everything through EM Grid Control. It is easy to setup and configure.
Anyways, if you have read the documentation on
Oracle® Data Guard Concepts and Administration and setup your environment accordingly then you should not have any problems. Atleast I can assure you that your production database will not be affected by it.
Just make sure that you follow each step and read thoroughly. If you have spare machines then you can test and record your configuration before performing it on your production db. This link will provide you with the information on DataGuard.
http://download-uk.oracle.com/docs/cd/B19306_01/server.102/b14239/concepts.htm
If you think that way then you will never be able to do any new stuff since you will always fear that something might go wrong. Go ahead pal, try it on test machines and you will know that it is not that difficult.
There are real experts who help people like us in this forum and I know that they are doing a pretty good job.
All the best.
Rgds
Adnan -
How much concurrent conection is allowed in oracle 10g XE?
How much concurrent conection is allowed in oracle 10g XE?
Hi,
>>How much concurrent conection is allowed in oracle 10g XE? I think that the default value on Oracle XE for the SESSIONS parameter is 40.
Then, if you will need more concurrent sessions accessing the database, you need increase this value using alter system command for this parameter.
Cheers -
How do send along hidden parameters from a form action method
Hi,
I have a JSP that displays an HTML form with several input types such as cehck boxes, radio buttons, text field and read only text fields. The read only fields are populated from a database. There are also a few hidden parameters that come in from the requesting JSP.
Now, when I have entered values in the input fields and click on SUBMIT, I want the action to lead to another jsp which will validate the entries and also want the hidden parameters in the html page sent and also want the read only values sent to the validating JSP ....how do I accomplish this ?
Please help !
maheshHmm...I did exactly that in my target jsp..where I used request.getParameter("MODE") where MODE is the key that I had passed into the html using an earlier jsp:forward command....something like "inputform.jsp?&MODE=ADD.....etc.
but my request.getParameter("MODE") returned null.
When you say properly formatted within the form and /form tags, I wonder if you could tell me what I need to do to format hidden parameters that have been passed along from an earlier request ?
Thank you very much,
Mahesh -
How to validate the input parameters in Oracle BI Publisher reports
Hi
i am new to Oracle BI Publisher
I am using OBI for generating simple reports.
here i need validation for input parameters (Date Parameter) and also want to disable the Date filed so that user can select through the calendar component.
Here validation in the sense, the system must validate the date and alert the user with an appropriate message
Can anyone please provide me the solution in detail.
Thanks in advance
Edited by: user10185520 on Aug 26, 2008 6:15 AMI have the same task to validate input parameters with Oracle BI Publisher 5.6.3 running under Oracle eBS 10.5.10.2. My validation goes beyond of what I can do during parameter registration. I am using Data Templates.
My first logical place was the before report trigger. So, I built a report trigger which returns 'false' in case the parameters are not proper. Guess what... XMLP just returns a hard-coded message
!!Error : trigger '" + datatrigger.getName() + "' returns status as 'false'
First of all, this is a bad style to hardcode messages visible by the user (especially during French implementation). Second of all, it is not informative at all. It would be nice to change oracle.apps.xdo.dataengine.XMLPGEN.executeTrigger() to read, for example, a message from the message stack when the trigger returns 'false' and let the user read it.
Anyway, what I did was I built a special data group, decalred before any other data group, query like
select my_package.my_validation fro dual
If parameters fail the validation my PL/SQL package throws an application exception with a message. At least, in this case the error message gets available as the description of the concurrent request.
I wish the before report trigger worked!!! -
How to Change IP Address in an Oracle 11g Fusion middleware environments
Hi,
We are changing server IP address. Not sure if I need to update any configuration files etc for the new IP address of the host. Can you please help on this
We have following 11g Fusion middleware comonents installed on the server:
Weblogic 10.3.3
SOA Suite 11.1.1.3.0
BPM 11.1.1.3.0
BAM 11.1.1.3.0
WebCenter 11.1.1.3.0
OHS 11.1.1.3.0>
I've a two node RAC working fine. I want to do an experiment and want to chang the VIP and private IP adresses. I canged the IP addresses in /etc/hosts files on bothe nodes and re-configured the eth1 with new IP addresses. I rebooted the nodes. When I try to start crs, I get error:
>
If you change your VIP to a different subnet, then you have to change your Public IP to the same subnet as well (vice versa)..
You may not have to change your Private IPs (let's say 10.10.10.x) because these are your interconnect addresses and are "private" to the RAC nodes...
You can read on the following Metalink Notes:
>
How to Change Interconnect/Public Interface IP or Subnet in Oracle Clusterware
Doc ID: 283684.1
Modifying the VIP or VIP Hostname of a 10g or 11g Oracle Clusterware Node
Doc ID: 276434.1
Considerations when Changing the Database Server Name or IP
Doc ID: 734559.1
Preparing For Changing the IP Addresses Of Oracle Database Servers
Doc ID: 363609.1
The Sqlnet Files That Need To Be Changed/Checked During Ip Address Change Of Database Server
Doc ID: 274476.1
>
Also check my notes about it.. http://karlarao.tiddlyspot.com/#%5B%5BRAC%20Change%20IP%20-%2010gR2%5D%5D
- Karl Arao
http://karlarao.wordpress.com
Edited by: Karl Arao on Apr 14, 2010 2:03 PM -
How to set/get URL-parameters from ORACLE -tag?
How do I set/get parameters in a URL, using the <ORACLE>-tag?
We are trying to create a UI Template containing a dynamic
stylesheet selection dialogue on top of every page. The question
we are facing now is how to pass parameters (in our case,
stylesheet settings) between different pages.
Any ideas/comments are appreciated!How do I set/get parameters in a URL, using the <ORACLE>-tag?
We are trying to create a UI Template containing a dynamic
stylesheet selection dialogue on top of every page. The question
we are facing now is how to pass parameters (in our case,
stylesheet settings) between different pages.
Any ideas/comments are appreciated! -
How to change archivelog file size in oracle 11g
Hello,
In my oracle 11g database inside flash recovery area how to increase each files size , now it 41 Mb per file iits name is o1_mf_1_161_8mfpwtbj_.arc how to change it to
the understandable name.
Thanks and regardsHi,
As you know archived log is create when online log is switch. Archived log size might be maximum equal to online redo log size.
Because archived log size is copied from online redo log file, if you want change archived redo log size, then you must change online redo log size.
But you must think, what is advantages and disadvantages of change of online redo log size, it depends direct task LGWR process.
You can change archived redo log name with change LOG_ARCHIVE_FORMAT parameter.
See : http://docs.oracle.com/cd/B19306_01/server.102/b14237/initparams103.htm
Regards
Mahir M. Quluzade -
How to change trace file location in Oracle Fusion Middleware
Hi all,
I would like to know how to change the location of the trace file in Oracle Fusion Middleware - Report Server 11g ?
I notice there is logging.xml file in $ORACLE_HOME/config/ReportServerComponenent/logging.xml. In the xml file, it did specify the location of the diagnostic file and other log files.
Is it the correct way to reconfigure the location of the log file? I havent try it though. :D
Thanks.Hi Fleix,
For additional instructions for Release 11i, see Note.167635.1 and Note.150168.1.
For additional instructions for Release 11.0.3 and 10.7, see Note.148982.1 and Note.135715.1.
a. Append the following to the end of the URL used to login to the Oracle Applications:
?play=&record=collect&log=/tmp/oracle.FRD.log
** Note: The self service login URL will not work for creating FRD trace files. You may need to talk to your technical team to get the URL that accesses the forms server directly.
b. If the URL to logon to 11i applications is:
http://machine:9603/dev60cgi/f60cgi
Then the following label needs to be included:
?play=&record=collect&log=/tmp/'file_name'.frd
For example to create frd for above url log in to application as
http://machine:9603/dev60cgi/f60cgi?play=&record=collect&log=/tmp/4764802.992.frd
c. Now log into the application and go directly to the form with the problem and perform the actions which generate the error.
Once the error has been generated and cleared, immediately log out of the application so no additional diagnostics are captured.
d. The diagnostics will be written to the file specifed after "log=". In the example, this would be /tmp/4764802.992.frd
e. After reproducing the issue, log on the server side of the instance and go to the directory to /tmp (cd tmp)
f. Retrieve the frd file: /tmp/4764802.992.frd
This file contains all the details about built-in programs, triggers, procedures in a FORM
Thanks,
Anchorage :) -
How to change main window title of oracle ebs
Hi all,
Kindly tell me how can we change the main title of oracle ebs 11i.
ThanksHello Gloscott,
Welcome to the Aperture discussion forum. Congratulations. You just hijacked a thread. That's bad form for 2 reasons. First, you added a message to a thread called "How to change main window view" which makes it look like you had information to add that thread, and you did not. Second, people who can help you are more likely to read a message that has your problem in the subject than they are to read this message. I.e., you won't get what you want if you ask for something else.
That being said, when you repost your query in a new thread, you'll have to be more specific. A "Frame" is not in the regular Aperture terminology.
nathan
Message was edited by: Mr Endo -
How get scott user database schema in oracle 10g express edition
hi
plz any on can tell me how to get the scott user database table details into the oracle 10g express edition
Iam created the user as scott but but i didn't get the table details
...plz give me the details correctly.You will go into this path C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. You can get scott.sql script yhen you need to run the script like @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. Otherwise you just copy the below script and save it into one file then run that file using @
Rem Copyright (c) 1990 by Oracle Corporation
Rem NAME
REM UTLSAMPL.SQL
Rem FUNCTION
Rem NOTES
Rem MODIFIED
Rem gdudey 06/28/95 - Modified for desktop seed database
Rem glumpkin 10/21/92 - Renamed from SQLBLD.SQL
Rem blinden 07/27/92 - Added primary and foreign keys to EMP and DEPT
Rem rlim 04/29/91 - change char to varchar2
Rem mmoore 04/08/91 - use unlimited tablespace priv
Rem pritto 04/04/91 - change SYSDATE to 13-JUL-87
Rem Mendels 12/07/90 - bug 30123;add to_date calls so language independent
Rem
rem
rem $Header: utlsampl.sql 7020100.1 94/09/23 22:14:24 cli Generic<base> $ sqlbld.sql
rem
SET TERMOUT OFF
SET ECHO OFF
rem CONGDON Invoked in RDBMS at build time. 29-DEC-1988
rem OATES: Created: 16-Feb-83
GRANT CONNECT,RESOURCE,UNLIMITED TABLESPACE TO SCOTT IDENTIFIED BY TIGER;
ALTER USER SCOTT DEFAULT TABLESPACE USERS;
ALTER USER SCOTT TEMPORARY TABLESPACE TEMP;
CONNECT SCOTT/TIGER
DROP TABLE DEPT;
CREATE TABLE DEPT
(DEPTNO NUMBER(2) CONSTRAINT PK_DEPT PRIMARY KEY,
DNAME VARCHAR2(14) ,
LOC VARCHAR2(13) ) ;
DROP TABLE EMP;
CREATE TABLE EMP
(EMPNO NUMBER(4) CONSTRAINT PK_EMP PRIMARY KEY,
ENAME VARCHAR2(10),
JOB VARCHAR2(9),
MGR NUMBER(4),
HIREDATE DATE,
SAL NUMBER(7,2),
COMM NUMBER(7,2),
DEPTNO NUMBER(2) CONSTRAINT FK_DEPTNO REFERENCES DEPT);
INSERT INTO DEPT VALUES
(10,'ACCOUNTING','NEW YORK');
INSERT INTO DEPT VALUES (20,'RESEARCH','DALLAS');
INSERT INTO DEPT VALUES
(30,'SALES','CHICAGO');
INSERT INTO DEPT VALUES
(40,'OPERATIONS','BOSTON');
INSERT INTO EMP VALUES
(7369,'SMITH','CLERK',7902,to_date('17-12-1980','dd-mm-yyyy'),800,NULL,20);
INSERT INTO EMP VALUES
(7499,'ALLEN','SALESMAN',7698,to_date('20-2-1981','dd-mm-yyyy'),1600,300,30);
INSERT INTO EMP VALUES
(7521,'WARD','SALESMAN',7698,to_date('22-2-1981','dd-mm-yyyy'),1250,500,30);
INSERT INTO EMP VALUES
(7566,'JONES','MANAGER',7839,to_date('2-4-1981','dd-mm-yyyy'),2975,NULL,20);
INSERT INTO EMP VALUES
(7654,'MARTIN','SALESMAN',7698,to_date('28-9-1981','dd-mm-yyyy'),1250,1400,30);
INSERT INTO EMP VALUES
(7698,'BLAKE','MANAGER',7839,to_date('1-5-1981','dd-mm-yyyy'),2850,NULL,30);
INSERT INTO EMP VALUES
(7782,'CLARK','MANAGER',7839,to_date('9-6-1981','dd-mm-yyyy'),2450,NULL,10);
INSERT INTO EMP VALUES
(7788,'SCOTT','ANALYST',7566,to_date('13-JUL-87')-85,3000,NULL,20);
INSERT INTO EMP VALUES
(7839,'KING','PRESIDENT',NULL,to_date('17-11-1981','dd-mm-yyyy'),5000,NULL,10);
INSERT INTO EMP VALUES
(7844,'TURNER','SALESMAN',7698,to_date('8-9-1981','dd-mm-yyyy'),1500,0,30);
INSERT INTO EMP VALUES
(7876,'ADAMS','CLERK',7788,to_date('13-JUL-87')-51,1100,NULL,20);
INSERT INTO EMP VALUES
(7900,'JAMES','CLERK',7698,to_date('3-12-1981','dd-mm-yyyy'),950,NULL,30);
INSERT INTO EMP VALUES
(7902,'FORD','ANALYST',7566,to_date('3-12-1981','dd-mm-yyyy'),3000,NULL,20);
INSERT INTO EMP VALUES
(7934,'MILLER','CLERK',7782,to_date('23-1-1982','dd-mm-yyyy'),1300,NULL,10);
DROP TABLE BONUS;
CREATE TABLE BONUS
ENAME VARCHAR2(10) ,
JOB VARCHAR2(9) ,
SAL NUMBER,
COMM NUMBER
DROP TABLE SALGRADE;
CREATE TABLE SALGRADE
( GRADE NUMBER,
LOSAL NUMBER,
HISAL NUMBER );
INSERT INTO SALGRADE VALUES (1,700,1200);
INSERT INTO SALGRADE VALUES (2,1201,1400);
INSERT INTO SALGRADE VALUES (3,1401,2000);
INSERT INTO SALGRADE VALUES (4,2001,3000);
INSERT INTO SALGRADE VALUES (5,3001,9999);
COMMIT;
SET TERMOUT ON
SET ECHO ON
Maybe you are looking for
-
Adapter Engine delay reading Queue
Hello, Can anyone help me with the following: Since a day or two we have been experiencing delays in message processing in the adapter engine. The delay is always in the same step when looking at a message via MDT: 2007-05-21 14:30:25 Success Message
-
Timeline inside timeline: how to relink to original clips?
Hello. One of our editors has started huge project in FCP 7 from organizing every shoot day in separated timelines. Then he has started editing using these timelines like a source clips, so, finally we have "master edit" made using 10+ timelines, ins
-
Challenging SQL...
Hi Everyone, I'm have a table that has the following kind of structure. Table X cont_id Number rid Number cont_nm_flg Char(1) bus_nm_flg Char(1) bt_add_flg Char(1) Upd_date Date Now the table will have multiple cont_id and also duplicates.I have to r
-
Hi Is there a way to access help files locally? Everytime I need to access the help files I get connected to thie internet and I have to wade through the site to find what I'm looking for. Sometimes I need to access help files whilst working where t
-
Can we add logo to BEx query ???
Hi All, I would like to know can we add logo to Bex query. I know that we can add to Bex workbook. Thanks