How to change SAP session time?

Hi,
We have 3 shift: 7.00am (2nd shift), 3.00pm (3rd shift) and 11.00pm (1st shift). And whenever we have customize programs which auto determine the shift defination, example when 11.00pm, system will auto default to 1st shift, we have issue on testing the cross shift scenario.
Is there a way to change the SAP session time, lets say from 02.00pm (current time) to 10.55pm for testing the cross shift determination without affected any other process? Then after testing, we change the SAP session time again back to normal.
Kindly please advise. Thank you.

hi
you cannot change the system timing.

Similar Messages

How to change the default time?

when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

Please see the following link for information on configuring the interdigit timeout.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
Hope this helps. If so, please rate the post.
Brandon

How to change password on time capsule

How to change password on time capsule?

The Time Capsule has two passwords.....a device password and a wireless network password.
Which password are you referring to here?
In order to provide detailed step by step instructions for how to change the password, we will need for you to also post back to let us know what type of operating system....Lion, Snow Leopard, Leopard, etc, that you are using on your Mac.

How to change date and time format

Hi experts,
Can i know how to change the date and time format?
I want the date format to be dd-mmm-yyyy and time format to be hh:mm:ss
These date and time is in my sapscript form.
I make use of PERFORM function in sapscript.
This is the code in my print program.
FORM get_actlog_QA TABLES in_tab STRUCTURE itcsy
                       out_tab STRUCTURE itcsy.
   DATA: object TYPE string, "
        qaname LIKE JCDS-USNAM, "NAME for engineering process, QA Manager
        qadate LIKE JCDS-UDATE, "DATE changed in engineering process, QA Manager
        qatime LIKE JCDS-UTIME. "TIME changed in engineering process, QA Manager
DATA: lt_jcds type standard table of jcds,
      wa_jcds like line of lt_jcds,
      new_date(10) type c.
READ TABLE in_tab INDEX 1.
MOVE in_tab-value TO object.
select * into CORRESPONDING FIELDS OF TABLE lt_jcds
from jcds WHERE objnr = object
    AND ( stat = 'E0005' )
    AND inact = ''.
Loop at lt_jcds into wa_jcds.
      qaname = wa_jcds-USNAM.
      qadate = wa_jcds-UDATE.
      qatime = wa_jcds-UTIME.
   READ TABLE out_tab INDEX 1.
   MOVE qaname TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
   READ TABLE out_tab INDEX 2.
   MOVE qadate TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
   READ TABLE out_tab INDEX 3.
   MOVE qatime TO out_tab-value.
   MODIFY out_tab INDEX sy-tabix.
endloop.
clear wa_jcds.
ENDFORM.
This is my PERFORM in sapscript.
/:           DEFINE &V_QANAME& = ''.
/:           DEFINE &V_QADATE& = ''.
/:           DEFINE &V_QATIME& = ''.
/:           PERFORM GET_ACTLOG_QA IN PROGRAM ZFIR002
/:           USING &VIQMEL-OBJNR&
/:           CHANGING &V_QANAME&
/:           CHANGING &V_QADATE&
/:           CHANGING &V_QATIME&
/:           ENDPERFORM.
Sapscript
Prepared by : &V_QANAME& ,, &V_QADATE& ,, &V_QATIME&
The output now is
Prepared by: Name   20080312 115536
I want to change the date format to 12-MAR-2008
and the time format to 11:55:36
Can anyone please suggest on how to solve this?
Thank you.

Hi,
Before assigning the QADATE value you can write the logic to display 20080312   as 12-MAR-2008 taking the offset values .
Like
qadate = wa_jcds-UDATE.
qatime = wa_jcds-UTIME.
lw_year    = qadate(4).
lw_month = qadate+4(2).
lw_date    = qadate+6(2).
case lw_month.
when 1.
when 2.
        concatenate lw_date '-FEB-' lw_year into qadate.
when 3.
      concatenate lw_date '-MAR-' lw_year into qadate.
endcase.
READ TABLE out_tab INDEX 2.
MOVE qadate TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
And you can also change the timeformat also .
then assign that value to qatime .Then
READ TABLE out_tab INDEX 3.
MOVE qatime TO out_tab-value.
MODIFY out_tab INDEX sy-tabix.
I think this helps you.
Regards,
Rajitha.

How to change the system time in (E-Business Suite)

Hi,
I need to change the system timings in E-Business Suite.
My Database & Application is on different nodes..
How could i change system timings on both...
Thanks,
Alig

Alig,
Changing the OS date/time will have no impact on the data (except for the scheduled jobs at the database and the OS levels). As mentioned in the threads I referenced above, you have to stop the application/database, change the date/time at the OS level, and start the application.
The application is just an interface which connects to the database, so it gets all the data from the database server. However, if you want to change the date/time it has to be done on both nodes (stop all the services first as mentioned above).
Btw, what is the point of changing the date/time because of Ramadan? The business requirement of your client does not make sense (how does it differ from the application/database perspective if you start working at 9:00 AM instead of 7:00 AM for example)?
The steps in the document should be enough, and if you do not trust any of the replies here you could simply log a SR and confirm this with Oracle support.
Thanks,
Hussein

How to change at run-time the type of a step?

Hi,
How topic title, i need to know how change at run-time the type of a step. I have, i my sub-sequence, a step whose type must change at run-time based upon the occurrence of a condition. How can do it?
Thanks.

I need to do this: At verify of a condition, one specific step at the end of sequence must change from statement to numeric limit test and viceversa.
However, is right to no writing self-modifyinf sequence unless handle rece condition on step that i want change at run-time.
Moreover i ask myself: If for change the type of a step i need first delete the substep and later create a new one relative to the step that I want, then it is better and make more sense to create dynamically the step that i would like to have depending on the condition that occurs, right?
Thanks

The impact of changing SAP system time zone.

Hello gurus,
We are in the company located in UTC+8 Time Zone. but during the system installation, the setting in SAP (tcode:STZAC) of the system time zone is CET, which is, not correct, and cause some issues: such as, when we try to send mail via SAP smtp, the sent time in the mail is always wrong.
We tried to modify it to UTC+8, but since we already go live for several months, there're lots of application data in the system. Before that we need to make sure that this change will not affect the current implementation.
Do you experts know the impact or risk of changing the system time zone after going live?
Regards,
Charlie

Lets look at this from a logic perspective, if your system is CET and you are moving to UTC+8 you are going a few hours ahead... so basically you'll find a gap in time in between the documents but you wont find any time conflict. So based on that it should be safe. You certainly need to check your jobs and make sure all necesary jobs will run so you can reschedule them if skipped by the time change (I guess).
Regards
Juan

On iCal,how to change the travel time mode from car to foot?

on iCal (Mavericks), how to change the traveltime mode before an event ? i only have the "time" choice with "5 min, 15 min, 30 min, 1 hour, 2 hours". I would like to choose "foot/walking" , "car" or "Train/bus".

America is only one of 197 countries in the world. So if you do not use a bike, your feet or public services to travel so, maybe 196 other countries do it :-)

How to Change date and time on my printer

I want to know how to change the date and time on my printer.

annazmussaqib,
OK, now enter the following command in the administrative user’s Terminal window:
sudo date -n 122921502013
When it asks you for a password, enter your administrative user’s password; it will not show the password as you type it.
After you enter that command, enter this command again:
date
It should show a date and time that is close enough to the actual date and time that you should be able to go into the Date & Time pane of System Preferences without it hanging.

How To Change password of Time Machine

Today I went in and changed the password of my time machine back up drive through Airport Utility. It stopped backing up. I tried deleting numerous passwords showing up in Keychain but didnt work so I changed it back to the old password. I looked in Apple Tech support file but nothing indicated how to change the password. Does anyone know the proper way to change my password in my time capsule? I use it as my internet router as well.

There are several passwords, and they are not necessarily identical:
Your Time Capsule
Your wireless network
Your Time Capsule's disk
It's not clear which of them you want to change, but any of them can be changed using AirPort Utility.
If Time Machine stopped backing up, open Time Machine's Preferences and turn off Time Machine. Choose "Add or Remove Backup Disks", choose the disk, then Remove Disk. Confirm with the Stop Using This Disk button. Add it again. You will be prompted for the disk's password (not the Time Capsule's). Time Machine will turn itself back on, a backup will then commence, and your existing backups will not be affected.
The iPad is a separate issue, but it has a similar fix: go to Settings > Wi-Fi, select your network then "Forget this Network". Select the network again, provide its password, and verify you can connect.

How to know user session time

Hi,
I want to know how to know or calculate the user session time till now from the time when user got connected
in simple current_time-begin_time.
thanks in advance

Try using the logon_time of v$session
test@>desc v$session;
Name Null? Type
LOGON_TIME DATE All columns of the view have not been displayed.
Adith

How to change PDF comments time in utc time zone*

Currently the eReview PDF time stamp uses the system time for its timestamp.
If there are two reviewers for a eReview packet, one in some X location and other in Phoenix and the reviewer in "X" reviews the packet first on a particular day evening and reviewer in Phoenix reviews the packet in their same day morning then the timestamp shows that Review in Phoenix is done first and "X" is done later.
The same is the case for comments from authors and the reviewers if both are different location.
So I think this time stamp looks inconsistent and does not give the desired information.
so its taking system by default,how to change it from system time to UTC time zone
Thanks&Regards
Sam rome

you could use the elapsed time function and hook it up to a case structure so that every .1 seconds you write your data to a file.
hope this helps:
Harold Timmis
[email protected]
Orlando,Fl
*Kudos always welcome
Attachments:
WriteToFileLVM.vi ‏65 KB

How to get Portal Session Time out values of CRM system

Hi,
I had a requirements to pass the Portal session Time out value to the External Configurator. How can I get that value. Is there any Function Module to get this value.
If you go to SMICM and select services, we see HTTP details. I need to get the Time out value what its showing there. How can I get that value. Is there any FM to get that value or Is there any existing code.
Please let me know if you need any further information.
Thanks.

Hi
The session time out value for CRM WEBUI is controled by parameter RDISP/PLUGIN_AUTO_LOGOUT.
Its value is got by BSP.
Please check in SE80 BSP application CRMCMP_IC_FRAME view hideenview.htm.
If you want to know the session time out value for portal, I am afraid that you need to raise questions in EP's forum.
Best regards,
Maggie

How to get Portal Session Time out values.

Hi,
I had a requirements to pass the Portal session Time out value to the External Configurator. How can I get that value. Is there any Function Module to get this value.

Hi
The session time out value for CRM WEBUI is controled by parameter RDISP/PLUGIN_AUTO_LOGOUT.
Its value is got by BSP.
Please check in SE80 BSP application CRMCMP_IC_FRAME view hideenview.htm.
If you want to know the session time out value for portal, I am afraid that you need to raise questions in EP's forum.
Best regards,
Maggie

How to change SAP host IP?

Hi, All
I want to change SAP host 's IP, the SAP system are installed as a Central System, Usage Type:
application server abap
enterprise portal
business intelligence
application server java
ep core
windows server 2003 x64, oracle 10g
Which configurations must be changed? such as database, ep, etc.
Best regards
Jiande Ding

If u r using java stack then u have to change in host file and in visual administrator u have to change fully host name .
Regards,
Gurprit Bhatia

How to change SAP session time?

Similar Messages

Maybe you are looking for