How to change SCCM 2012 R2 Product key?

Dear All
I need changing SCCM 2012 R2 product Key i was using another company Product key by mistake, i discovered that after finishing installation and Configuration my server become a live now so can any one help me to change it.
note:-
No way to remove the site and reinstall again.
Thanks for your help in Advance.

You change your product key by running ConfigMgr 2012 setup. You can following this guide for how-to: http://www.ronnipedersen.com/2012/05/convert-system-center-2012-from-evaluation-to-full-product-version/
Normally this procedure is for changing the evaluation version of ConfigMgr 2012 to the full version by specifying a full version product key.
I have done a lot of ConfigMgr 2012 installations for various customers and the key has always been the same.
Thanks, but its already activated with another key and i cannot find this option

Similar Messages

  • How can I change reinstall to correct product key?

    Had to wipe drive and reinstall operating system. When I reinstalled Office for Mac, I used the wrong product key (from another computer). How can I change reinstall to correct product key?

    Try completely removing MS Office and then reinstalling it.
    How to completely remove Office for Mac 2011
    http://support.microsoft.com/kb/2398768
    Or you can try doing just step 4 (removing the license file).

  • Using Windows Server 2012 VL Product key with Windows Server 2012 R2

    Hi all,
    Trying to use a Server 2012 vl product key to active a Server 2012 R2, but running into issues, namely it is not accepting the key. I have read many threads pointing out that different keys are required, but no mention of the process that one needs
    to take in order to obtain/swap product keys? Any ideas appreciated? :)

    The product key I have is for Windows Server 2012 Standard VL, (It's not a DC).
    I have downloaded the evaluation iso for Windows Server 2012 R2 and want to licence it (with a VL), but it is failing with the Windows Server Standard 2012 VL product key.
    My question is - am I doing something wrong, or do I need to ask Microsoft to change the product key / buy a new one? - What steps do I need to take?
    The product key for WS2012 will not work for WS2012R2. (so, yeah, you're doing that wrong)
    WS2012R2 is not a "free" upgrade from WS2012 (it's different to Win8.0 -> Win8.1)
    Your WS2012 pkey will work with WS2012. To use WS2012R2 you need a WS2012R2 pkey.
    If you want to "convert" an evaluation license install, into a full licensed install, you must match the version (2012 vs. 2012R2) and the edition, and must use DISM as well as the correct pkey.
    http://technet.microsoft.com/en-us/library/jj574204.aspx
    If you don't have the correct pkey for WS2012R2 already, and you don't have one waiting for you in the Volume Licensing Service Center website, you'll need to purchase a new license for WS2012R2.
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • How to check SCCM 2012 SP1 license?

    Hi,
    I have SCCM 2012 SP1 and the program is licensed.
    I must know :
    1. How to check SCCM 2012 SP1 edition is Standard or Datacenter?
    2. How limit of SCEP (Endpoint Protection) client that can managed by SCCM 2012 SP1 Standard or Datacenter?
    Regards, Bar Waelah

    There is no limitations or feature changes between standard and datacenter.
    You can read more about the new licensing model for System Center 2012 here:
    http://www.microsoft.com/licensing/about-licensing/SystemCenter2012-R2.aspx
    If you don't know which license you have bought i think you need to Contact Microsoft.

  • How to replace or change SCCM 2012 R2 install account

    Hello,
    If we have a need to off-board/replace/change the user (Bob) who originally installed SCCM with, what would the reprocussions of such action be? Anyone attempted to do such a thing before? Is this 'supported'?
    Details:
    This user used their 'extra' account (Let's call it "BobAdmin") that had domain admin rights to install SCCM with, however since then have moved onto another role within the organization which is now not related to SCCM. While they have
    retained their accounts "Bob" and "BobAdmin" we want to prevent this user from accessing/managing/logging into SCCM.
    When we review the properties of any objects, we see this user's 'extra' account (BobAdmin) is listed as "Created by, Modified by" for most objects, including but not limited to:
    "All Users" "All computers",
    Security Scopes "Default" , "All"
    Client Settings "Default Client Settings"
    Boundaries, Sites, etc...
    Not to mention SQL connectivity - this user is listed as having "public" and "smsdbrole_AITool" role memberships with "public" Server role.
    Current role this user has (BobAdmin) is Full Administrator/all scopes/all collections, however, it is not listed in the "Administration | Security | Accounts" section.
    Original install details: (clean/new) 2012 Datacenter edition, upgraded to SP1 CU3, then R2 CU1; SQL is 2008 R2 with plenty of resources etc. Primary Site only, Single AD domain, Multiple DP servers w PXE boot,
    Single Reporting Server, Single Application web service/website, Software Update point... AD schema extended.
    Option 1:
    Rename user to something other than "BobAdmin" & change that accounts password (Not sure if this is the best option given how engrained some SCCM things are with Windows User profiles etc...)
    Option 2:
    Leave the user's name as is ("BobAdmin") & just change the password? Change the user's first/last name/description to reflect what it's used for now. (i.e. treat it like any other service account?)
    Option 3:
    Verify that we have other Full Administrators defined (Already done.)
    Disable the user ("BobAdmin") and then in 30 days or so, delete this account if all works fine.
    What happens to the "Created by, Modified by: verbiage if that happens"? (Prefer not to have to dig through the AD recycle bin to fix a broken SCCM...)
    NOTE: Assume that we have full AD, site, sql & vm backups of these servers systems etc...
    References
    https://technet.microsoft.com/en-us/library/gg682088.aspx
    What is the minimum I have to configure if I don’t want to use role-based administration while I’m testing System Center 2012 Configuration Manager?
    If you install System Center 2012 Configuration Manager, there is no additional configuration because the Active Directory user account used to install Configuration Manager is automatically assigned to the
    Full Administrator security role, assigned to All Scopes, and has access to the
    All Systems and All Users and User Groups collections. However, if you want to provide full administrative permissions for other Active Directory users to access System Center 2012 Configuration Manager, create new administrative
    users in Configuration Manager using their Windows accounts and then assign them to the
    Full Administrator security role.
    https://technet.microsoft.com/en-us/library/hh427337.aspx
    https://technet.microsoft.com/en-us/library/hh427332.aspx

    Option 1 or 2 are fine. Changing the user name has no effect as just like all good Windows apps, it doesn't reference the actual name but instead uses the SID.
    Option 3 is not sufficient for every single thing delegated to this account. Granted, I can't name what these things are and they are very, very little used, but they do exist. If you do delete the account, the only way to get an equivalent one back is to
    call support as it involves updating the DB directly.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • How to change operation dates in Production Order /Capacity Leveling

    Dear Experts ,
    We are using ECC 5.0 .In production order , scheduling happing as Backward  based on the Sales Order Delivery Date .I am doing the following :
    1.Demand as Sales Order with Delievery date : 20.03.2010
    2.Running MRP with Lead Time Scheduling -2  in md02 and converting the Planned Order to Production Order .
    4.Production Order have following dates :
             Basic Finsish Date : 21.03.2010
             Basic Start : the day Pl.Or--Pr.Ord
             Schedule Start : 15.03.2010
             Schedule Finsish : 17.03.2010
            Schedule Release : 13.03.2010
    5.In schedueling margin key :  Float Before Production : 3    , FAP : 3 , Release Period : 2
    6.In material master : Work Scheduling View : Setup : 3 days , Processing : 4 ,Interoperation : 2 for one Base Qty 1
    7.In operation : Op1  : Start Date  : 15.03.2010    Finish Date: 15.03.2010
                             Op2 : Start Date : 16.03.2010      Finish Date : 17.03.2010
                             Op2 : Start Date : 17.03.2010      FD : 17.03.2010
    Question :
    1.How to change the Operation dates  in Production Order Operation over view screen ? Today,  operation over view screen , Start date and Finsih Date  of individual operation are not changable with in Production Basic Start /BF date  or beyond .It is only changing based on the Standard Value : Labor
    2.How to change/re-schedule operation dates d in CM21 (Graphical view -Work Center Capacity load as per   Production Order and Operation combination ) based on capacity availale in advance dates? I am using  Time Profile : SAPSFCZ002 -SFC Graph midterm-3 motnhs and Planning  ,
    How to solve this above issue in scheduling operation and capacity distribution .
    Regards
    JH

    Closing the thread

  • I have 2008 microsoft office with three license keys. i bought my daughter a new make and wiped her older mac. question is when i did this it says there are too many users for program  how can i figure out where product key is

    I have microsoft officemac w 3 licenses. I have one key on one computer and the second key on another. Problem I bought daughter new mac (3rd computer) and put on key on her new computer. With her old computer we wiped it to back to factory etc. Then I added a product key for officemac on old
    est computer. Now when I use my wiped computer it comes up saying that all product keys are taken. How do I check to see if she has the same key number as the old one I have? I have paid for three but her computer and my old one must have the same key number. I need help in checking key numbers so I can set it right. Thanks 

    Office 2008 for Mac error: "Microsoft Office 2008 ... - Microsoft Support

  • How to change Profit center in production order

    Hi guys,
    I have to change Profit center value in production order. Order has been created and released also. How to change, if i directly change system throwing error...Please suggest me in this case.
    RGDS
    Dos

    Then Go to OBA5 enter the KO  Application area
    Add the 367 message and  your user iD enter warning in online and Batch,
    After that You can able to Change the   profit center in Order with warning message in Order

  • How to input MSDN Project Pro Product Key in Office 365 environment

    Hi, there
    Our company just recently moved to Office 365 from Office 2013. I had to uninstall all my Office 2013 applications and re-install them from our Office 365 site. In addition to our common Office applications, I also had Project Pro 2013 installed with the
    product key I obtained from my MSDN account. The Project Pro worked fine before the Office 365 transition. But after the transition, I keep getting this pop up asking me to sign in to Office 365. Since our company Office 365 suite does not provide Project,
    I cannot use most of the function of my Project Pro, even though I have input my Product Key before.
    Is there a way to separate out the Project Pro so it doesn't link to Office 365 Portal? Or is there a way to input my product key through Office 365 portal?
    Thanks.

    You should be able to enter the Product Key for Project 2013.  
    Navigate to the Control Panel.
    Select Programs
    Select Programs and Features.
    Find Microsoft Project Professional in the list and single click to select it.
    Click Change at the top of the list.
    Select Enter a Product Key.
    I hope this helps.

  • How do I locate the 25character product key to use ms office homestudent 2007

    how do i locate or get the 25 character product key to be able to utilize word ms office home and student 2007

    Sorry, that issue isn't related to Firefox support. See if you can get help from this forum. http://lounge.windowssecrets.com/index.php

  • How to Setup SCCM 2012 to manage Application step by step!!!

    Dear everybody,
    My company is making plan to deploy SCCM 2012 to manage PCs list after updating through WSUS
    Please help me for guied to setup it step by step
    Thanks for your help!!!

    And here are the guides from Gerry as well,
    http://gerryhampsoncm.blogspot.se/2013/02/sccm-2012-sp1-step-by-step-guide.html
    There are many great books out there as well, Configuration Manager is a complex product so I would recommend som training and or a good book as well as a compliment to get you started.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Download the Evaluation: Windows Server 2012 R2 product key

    Where do you obtain the product key information? 
    for the .iso download version to be functional

    Hi Marz,
    You can download Win2012 R2 from mentioned link
    http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/default.aspx#fbid=kyb2VoUOHw-
    http://blogs.technet.com/b/firehose/archive/2013/06/25/system-center-2012-r2-now-available-for-download.aspx
    and key is provided in mentioned link
    http://technet.microsoft.com/en-us/library/jj612867.aspx
    I have already downloaded it and checked it, it is working fine without issue.
    If you have installed Evaulation version and unable to use KMS key then Try mentioned link, it is very helpful
    http://www.doitfixit.com/index.php?option=com_content&view=article&id=192:upgrade-server-evaluation-version&catid=48:active-directory&Itemid=53
    http://workinghardinit.wordpress.com/tag/windows-server-2012-r2/
    Steps are
    1. check Current Edition
    DISM /online /Get-CurrentEdition
    2. Check Target Edition
    DISM /online /Get-TargetEditions
    3.
    DISM /online /Set-Edition:ServerStandard /ProductKey:D2N9P-3P6X9-2R39C-7RTCD-MDVJX /AcceptEula
    or
    DISM /online /Set-Edition:ServerDatacenter /ProductKey:W3GGN-FT8W3-Y4M27-J84CP-Q3VJ9 /AcceptEula
    Now you can install the new Windows 2012 R2 KMS key. If you run in to any issues here, restarting the KMS Service can help (("net stop sppsvc" and "net start sppsvc") . Try that first.
    4.
    slmgr.vbs /ipk D2N9P-3P6X9-2R39C-7RTCD-MDVJX
    or
    slmgr.vbs /ipk W3GGN-FT8W3-Y4M27-J84CP-Q3VJ9
    once it done, we can cross check the time period
    5
    slmgr.vbs /dlv
    Kirpal Singh

  • How to find Windows 8.1 product key on the laptop?

    I have a problem since doing the windows updates. My laptop seams to have erased everything off my hard drive, I have a legitimate windows 8 disk to reinstall it but no product key, is there anyway to find it on the laptop?
    I have tried doing the regedit, but can't seam to find it any where

    When you buy new notebook and get it with preinstalled OS you will get one valid version that includes valid product key.
    With other words original version that you got with your machine will be properly activated. Product key belongs to this original version only and you cannot use it for activation if you want to install own OS version.
    For your Win8 version you must pick up product key from Microsoft.
    Of course you can have original OS version again but you must order it by Toshiba - https://backupmedia.toshiba.eu/landing.aspx

  • How to enable SCCM 2012 clients to get Windows Updates through SSL VPN

    I would like my SCCM 2012 client laptops to get Windows Updates through SSL VPN.
    I suppose I need to add VPN Subnet in my boundary and boundary group.
    What other setting I need to enable?
    At this moment, on the 'Software Update Point Component Properties' "Allow intranet-only client connections" radio button is active. Do I neeed to select "Allow both intranet and internet client connections" and Enable SSL communications
    for the WSUS server?
    or are there something else I need to check?

    No, a VPN client is no different than a client connected internally as far as the network is concerned and as far as ConfigMgr is concerned there is no way to explicitly know any different. Internet clients literally are those that connect via the Internet
    using IBCM.
    Jason | http://blog.configmgrftw.com

  • How to Upgrade SCCM 2012 if DB is Corrupt

    I have attempted a couple upgrades to SCCM 2012 SP1 to R2.  In each case it appears my DB is corrupt so the upgrade cannot be accomplished.  /testdatabaseupgrade on a separate system indicates several problems.  
    Is there a means of repairing the DB or am I stuck contacting Microsoft for assistance?  Or do I need to start over with a new instance of SCCM 2012 R2?

    Don't upgrade if /testdbupgrade failed. You have to fix the issues first. Which problems did you see?
    Torsten Meringer | http://www.mssccmfaq.de

Maybe you are looking for