How to change table name after creating page and application

Hi HTMLDB Team,
i have created a application with page where the region use master detail form with table name emp.Now after developing the page and the application i want to change the table from emp to emp2 where emp2 is the table with same structure of existing emp and same field properties.How can i edit the table as emp2 ?
Thanks in advance,
Cheers,
koushik

Koushik,
Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
If you still want to give it a go:
Assuming that you created the 2-page Master Detail report & form:
On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
Thanks,
- Scott -

Similar Messages

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

How to change appraiser / reviewer after creating the appraisal template

Hi All,
Once the Appraisal template created, if we have changes in appraiser / reviewer, how we can change the new names in the appraisal template in standard (other than T.Code: Phap_admin --> Change header data).
For eg., we have created a document for PERNR 1 on Apr 1st for 01.04.2014 to 31.03.2015 with appraiser as Mr. XYZ, on 01.05.2014 Mr. XYZ left and Mr. PQR replaced that position. In this case, how we can replace appraiser name for PERNR 1 as Mr. PQR in the appraisal template.
Please suggest.
Regards,
Venkat Nagam

Koushik,
Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
If you still want to give it a go:
Assuming that you created the 2-page Master Detail report & form:
On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
Thanks,
- Scott -

How to change Table Name

hi
i have created a Z table, in my development server,
can i now change the name of the table, is it possible.
abhishek suppal

you have to copy it.
from se11
regards
how many table entries it have
if too much then create small program to download from original table and upload in new one.
Message was edited by: Surpreet Singh Bal

How to change CUBE properies after create

Hi,
I am using AWM 102020A, I have created a CUBE and now want to go back and change some of the implementation details , is it possible to change :-
Tab -> Implementation Details
1. Order of dimensions
2. Sparsity checkbox
3. Partition Details
Tab -> Cache
1. Turn on session cache if checked off.
Seems these are locked down after create, how can I change these details.
Thanks for any help,
Brandon

Since you are you using the 10.2.0.2 version of AWM I suppose the database version you are using is also 10.2.0.2 or below.
So to my knowledge the answer is no.
If you are on the 10.2.0.3 version you have some more options because of the integrated sparsity advisor. Then you would have had the opportunity to recreate the cube. I have never tested the actual recreate function, but I've tested the sparsity advisor and saw that I could change if the cube was to be compressed, what dimension to be sparse etc.
Seems like to have to have the 10.2.0.3 version of the database for this to work.
regards Ragnar

HT4864 How to change email name after account is already created

I already have an email account but I want to change the email name, not the name on the account. Is it possible to change the email name?

Settings>Mail, contacts, calendars>
Choose the mail account
Erase the existing name or part of the name that you want to change and retype the correct name. I made a spelling error in my display name when I initially set up the account. I tried to change just the one wrong letter but it would not save, so I finally erased the entire word and retyped it and it worked!

How to change table defnition after upgrade from 9 to 10 ?

after upgrade from 9 to 10, tables ddl still like 9i:
.................PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255..........
................ inndex PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS..........
Is there a method to convert it all tables to new 10g style without re-create thousands tables then emp/imp one by one?
Thanks

What do you mean by "10g style"? Do you want tables to be using ASSM? If that's the case, that's a feature of tablespace itself. So it means that your tables need to be in those tablespace which are having Segment Space management auto set in them.I don't think that there is any automatic package which can do the same on the fly.
One way ,which may not be very less time consuming but still can help is to convert the segment space management using EM.But again,this does recreate teh tablespace so I don't think that this is any different from exp/imp.
HTH
Aman....

How to change aspect ratio AFTER creating a project

I created a project in FCPX and somehow it's got Black bars on the left and right (i think i created a 16:9 project and put 4:3 clips in). I can't enlarge the clips as they contain text that would be cropped out, so i need to turn my 16:9 project into a 4:3 project. Is this possible?
Regards
Mike

Close your project if it's open by going back to the Project Library view (where you see all your projects). Select the project, open the inspector (command-4) if it isn't already open. At the bottom right of the inspector, click the wrench icon. Change your projects properties and click OK.

How to Change Delivery quantity after creating Transfer order

Hi
I created a transfer order for my delivery with LT03. There is already non-ordered quantity in my delivery.
delivery quantity is 5 but transfer order's quantity is 4.
i want to change my delivery quantity without confirming the transfer order.
Is it possible
is there any customization or function for that work ?
in se37, i tried BAPI_OUTB_DELIVERY_CHANGE. it returned the error "there is an unconfirmed transfer order"
Moved to SD froum from LE forum at the request of OP
Edited by: Csaba Szommer on Apr 18, 2011 1:21 PM

If you set "Copy WM quantity as delivery quantity into delivery" for your WH/wm-mvt combination in WM/Shipping interface, the delivery quantity will be always adjusted to the picking quantity ("1" in field V_T3333-WMMUE).
The same can be achieved manually as it was told you by Andrzej.
There's no separate function modul to do this.
When system is processing FCODE "KOMU_T" (manual process) the delivery quantity will be changed in include MV50AF0F_FCODE_KOMU in internal structure "lips":
      IF xlips-pikmg > xlips-lfimg OR likpd-kzebu IS INITIAL.
        PERFORM check_and_set_pikmg_lfimg CHANGING lf_subrc.
        CHECK lf_subrc = 0.
      ENDIF.
But this is one thing, there's some preparation before this step and and the change in "lips" will cause the change of "xlips" later on, etc.
So, it is related to several programs (includes) and forms.
Please contact your ABAPer if you are not familiar with technical things.
Edited by: Csaba Szommer on Apr 18, 2011 10:55 PM

Will someone please tell me how to change the name of a folder I created in Pages and saved to the cloud?

Will someone please tell me how to change the name of a folder I created in "Pages" and saved to the "Cloud"? Thanks.

Go to the open dialog in Pages and select iCloud.
Click on the folder that you created on iCloud to open the folder.
On the lower half of the window (the open folder) click on the name of the folder.
Once you click and select the folder's name it should be editable.

How to change of NAME and IP after RAC installation.

Hi Friends,
I have a challenge here...Would appreciate if anyone can help me..
I have to install 10.2.0.3 Oracle RAC on windows 2003 server 64 bit.
My issue is now the server names and ips are set and I am going to install the RAC.
But the client need is that after one month, they need to change the names and ips of the servers (a one time change).
Because according to their server naming standards, current production servers are having the acceptable names and ips.
The installation was on a 32 bit OS, so they are facing out of process memory errors. Thats why they are going to 64 bit OS on new servers.
After the new servers are ready, the data will be migrated to new server. After a month, they need to change the names of new servers to that of the old (current production) servers.
Could anybody help me by giving me information about how to change the NAME and IP after a RAC installation ?
Any metalink notes or commands as it is........
Thank you,
Mahesh.

Hi,
You can change the IP later but you can not change the hostname of the system.
You have to install CRS freah if you want to change the hostname of the system.
Please let us know which IP you want to change.
You can see the metalink Note.276434.1 for VIP or VIP hostname change.
Regards,
KK

How to change the "name of column" property of an text item in runtime?

How to change the "name of column" property of an text item in runtime?
I look the properties of items in help and found nothing about this!
It's possible?

Hi,
an other solution is change the block property QUERY_DATA_SOURCE_TYPE from "Table" to "Sub-query" , than change at run time the property QUERY_DATA_SOURCE_NAME.
First create block and add items
The QUERY_DATA_SOURCE_NAME will be for ex. "Select 'A' as col1, 'B' AS col2, 'C' as col3 from dual"
Set into items the column name property to col1 , col2 ...
At run time change the query to "Select 'Z' as col1, 'X' as col2 , 'Y' as col3 from dual"
in this way you can change the source of column value.
Caution because if you change value type from varchar2 to date you must cast date into varchar2.
May be that this way is valid only for view data not for insert-update, i don't remember.
bye
Message was edited by:
Killernero

Cannot change table-name in persistent.xml

I've successful deployed a Entity EJB on "SAP Enterprise Portal 6.0 SP4 NetWeaver Developer Sneak Preview"
After changing the Table Name in persistent.xml and re-deploying the new EAR, the Entity EJB still writes to the old table.
How can I get SAP Web AS to accept the new persistent.xml/persistent-ejb-map/entity-beans/entity-bean/table-name entry ?
I've already tried:
1) Re-deploy EAR and re-boot the server
2) Delete all old copies of EAR directories and temporary files, reboot and re-deploy.
Note: Expanding new EAR confirms that persistent.xml/table-name has been updated on the SAP Web AS. However, EJB still writes to the old table.
Alton

In Web AS 6.40 the application data is stored in the database, therefore it is restored even if you delete the folders in the file system.
To undeploy the application, you can use the Deploy Service runtime in Visual Administrator. Start the Visual Administrator using the go script file in <drive>:\usr\sap\<SID>\JC00\j2ee\admin. Then expand the Services tree under the server node, and choose Deploy. On the right-hand side of the screen switch to Application view, select your application, and choose Remove.
Zornitsa

How to change table of content font in captivate 6

Hi There,
Can somebody please suggest me how to change table of Content Text font English to Arabic in Captivate 6 and which font supports Arabic language.
Please refer below image, highlighted text font should be changed.
Looking forward for help.
Thanks,
Srikanth

The weird sliding navigation is Apples pride and joy!
That TOC allows you to slide between chapters, sections and pages.
iBooks Authjor was designed to do what it does and what Apple wanted it to do.
Some things can be changed during the books production, but the " weird navigation" is not something you can change to do what you want.
iBooks Author is does not produce ePubs.. at least not as "ePub" is known from Pages, inDesign etc,.
If you want what is available in ePubs.. then iBooks Author is not the application to produce it.
You could drag a section page above chapter on and create an index type page using book marks for links - but whats the point?
People using iPads and familiar with iBooksAuthors special way of book presentation.. are quite happy its so easy to use.

How to find table name for the fields from Standard Extractor in CRM system

How to find table name of fields from the standard extractor in CRM system ?
e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

Hi ,
Please find the link below for understanding BW CRM analysis.
http://help.sap.com/bp_biv135/html/bw.htm
activate the CRM DSs by scenario:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Hope this helps.
Regards,
csm reddy

How to change table name after creating page and application

Similar Messages

Maybe you are looking for