How to change the back ground colour of the firefoxweb page

I tried to upgrade Fire fox Mozilla as requested from the home page.. but it did not complete.
When I went to surf the net the background screen colour was Black and now I could not see the web pages clearly, as some writing is in colour and does not stand out against the black background.
It used to be a dark pink which was horrible when I used to view some web pages such as Ebay.. can anyone help change the back ground colour on the home page of Firefox.
Regards
Simon

Hi,
Please try enabling '''Allow pages to choose their own colors, instead of my selections above''' in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Content''' > '''Colors'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Content%20panel Options > Content]
If the problem persists please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Similar Messages

Genetare the back ground jobs of the program from the SM36 tcode

Hi All,
Consider the following points:
-- My main program will schedule the jobs using the CALL TRANSACTION method
-- Now i want to create a Variant for the Main program and generate the back ground job using the SM36 Tcode
-- Finally it has all the jobs of the main program
-- Program is working fine from the Frontend only.....
Please provide solution for the same.
Thanks in Advance.
Regards,
Ramana

Sravya,
On SM36 when you schedule jobs, you will see options like AFTER EVENT and AFTER JOB. You can use these to schedule you jobs accordingly. Else you can also think of making each of these jobs as a steps in one single job if your requirement allows you to do the same.
In case of using events, you should make sure to raise the event using available FMs.
thanks,
Vikram.M

How to change the back ground colour of region and a page

Hello Gurus,
I want to change the look and feel of the page that I have created. Coul you please help me which attributes or properties needs to be updated?
Thanks in Advance.

Hi,
Please try enabling '''Allow pages to choose their own colors, instead of my selections above''' in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Content''' > '''Colors'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Content%20panel Options > Content]
If the problem persists please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

How to change style (back-ground color) in selectBooleanCheckbox?

Hi
I've got selectBooleanCheckbox:
af:selectBooleanCheckbox text="selectBooleanCheckbox 1"
label="Label 1" />
I can change background color of text="selectBooleanCheckbox 1" and label="Label 1"? just by adding inlineStyle="background-color:rgb(255,255,66)"
SO, How can I change background color in space BETWEEN text and label (just at the checkBox)?

Hi,
the inline style property only styled the DOM node of the component. ADF Faces components are complex DHTML components that you style by writing a custom skin (see developer guide for skinning). If you don't want to write a custom skin, use Firebug to determine the style class generated for this component
Frank

My Prompt back ground colour changes during run time in Client / Server Env

Dear Friends, 
 My Prompt of text items are changing its back ground colour according to the Text item's back colour during runtime. This doesn't look good. My look and feel of my application gets spoiled due to this. I tried with Visual Attribute (both prompt & Text item) but of no use. I don't want to use text label as I want to change the prompt during run time. Please help me. 
 Form during Design time 
<IMG SRC="C:\Documents and Settings\Administrator\My Documents\My Pictures\myform1.jpg"></IMG>
Form during Runtime 
<IMG SRC="C:\Documents and Settings\Administrator\My Documents\My Pictures\myform2.jpg"></IMG>
 Thank you.
Regards,
Senthil .A. Perumal.
My version of forms is Forms [32 Bit] Version 6.0.8.8.0 (Production).


Dear Kevin,
Yes I agree with you, but in my case as this application supports bilingual (English & Arabic), I want to change the prompt of the text at run time. Can I change the text of boilerplate text at runtime?
Thank you for your reply.
Regards,
Senthil .A. Perumal.

Help to change screen back to colour

My child was playing on the computer & she has accidently changed everything to black & white & I would like to know how to change it back to colour plz!!
It comes on colour briefly & changes back to black & white
Help plz!

Open the Universal Access pane of System Preferences, click on the Seeing tab, turn off White on Black, and drag the Contrast slider all the way to the left.
(54864)

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back. It's the same for all icon and websites, does anyone know how to restore?

Wow! I think I had this same issue just last night.
I was cleaning my macbook pro retina on the outside. Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly. It looked super strange, it was like green halo's and it looked worse when looking at it at an angle. Of course I took no pictures!!! I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
But I digress... The image looked very green and spacey, it was almost a neat effect. After about 5 minutes it started to look a little more digital though. There were straight lines of this halo effect on the edges and top. After about 10 minutes it turned into a predominate issue with the blacks on screen. I could open a web browser and it was unnoticable on a white background. After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle. After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange. But I believe that might be all in my head now.
So yerp, lemme know what you guys figure out.

How to suppress the back-ground execution of a query in design mode

hi guys,
there is a bahaviour of the system, that I'd like to change. So, when we
1. start EXCEL
2. go to the designer mode to create a report
3. first drop an InfoProvider (e query) into a cell,
4. second - pull e.g a filter element into another cell, still being in the design mode.
Just in this moment, the query itself has been already started in the back groud, aiming to fill the cache, I guess.
Does anyone know how to suppress the back-ground execution? I'd like to control, when to start the reports execution.
Thanks in advance.
Neven

Hello,
There is no way to do that if you are creating thru BEx Analyzer.
Instead use the BEx Analyzer, try to create using directly BEx Query Designer.
In that way, the query will not be executed, until you want to...
Thank you
Edward John

Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
If that is an accurate description of the problem, consider this:
Image 1: The original image
Image 2: Edit > Fill with the Blending mode set to Color. White remains white
Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
(I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)

Changing the back ground screen in Apex

Hi guys how do you change the back ground in an application from the normal white back ground to sort of incorporate some sort of wall paper to make it look better

In general this will depend on your theme. But this CSS would work:
body {background-color: #E3E3F0;}
It changes the body tag, which is the whole page to a specific RGB color.
Thanks
-Jorge

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version?

As an update, I installed an update 5.7on my Mac laptop, now the Lightroom 5.0 has become a "Lightroom Mobile" version. How can change it back to the laptop version 5.7?
Thanks for any help you can provide.

LR on your laptop is still a desktop version. It is just now able to upload to the cloud to replicate photos to either http://lightroom.adobe.com/ or an iPad that has LR Mobile installed.
I think you probably just want to change the LR 5 identity plate back so it doesn’t mention LR Mobile all the time. Hover over the identity-plate area, and click on the little triangle that appears, then choose Change Identity Plate.

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How do I turn off programs running in the back ground on my iPad

How do I turn off apps running in the back ground with the new update

How to Close Apps
Double Tap the Home Button... Then swipe the App (not the icon) Upwards... Tap the Home Button when finished.
From Here > http://support.apple.com/kb/HT4211

How do you change the slide background colour in the keynote app?

How do you change the slide background colour in the keynote app?

You can't (not in Keynote for iOS). The background color is a function of the template selected when you create the file initially and cannot be altered. the only workaround I know of is to add a graphic file to the slide and position it behind all other content, but this would need to be repeated on any slide you wish to "recolor".

How can i put out the back ground music???

how can I set off the back ground music??

I'm afraid your question is not clear. If you don't want music playing, close iTunes. If the music is on a web site that you are visiting, mute your sound - System Preferences>Sound>mute.

How to change the back ground colour of the firefoxweb page

Similar Messages

Maybe you are looking for