How to change the design of multiple-choice checkboxes
Hello,
i want to change the look of multiple-choice quizzes. Instead of the typical checkbox with checkmark i would like to place a button that changes its color - for example blue for right (activated) and white for wrong (not selected).
I think it should be possible, but I don't know where I can change the look of checkboxes. I Tried it with a hotspot-quiz, but that is not exactly what I'm searching for.
The best solution for me would be a kind of button with mouse-over effect as known from websites (HTML).
Can you please tell me what I have to edit?
Thank you very much.
Boris
Hello and thank you for posting this information. I'm still seeing a number of problems with implementing a workable solution.
For HTML5 only (not Flash), I have changed the image: HTML/assets/htmlimages/checkBox_selected.png to a blue button (118x53 pixels instead of the default 22x22pixels), and as expected the button will still be the same size until I change the code description of the checkbox. I found the CSS description of the checkbox button in: HTML/assets/css/CPQuiz.css and have made the changes to the width and height (see below), and even though the following changes are generated in the output files, they don't have any effect on the button. However, I found that if I changed the 'Project.js' file where it defines the width and height of the checkboxes that this would actually change the values, but this is always re-written over and generated each time you click 'Publish'.
So, I then found some hard-coding in the file: HTML/assets/js/CPLibrary.js (just search for 22px and you'll see that the checkbox description width and height are not being read from the CSS file) and this appears to be where the actual code is coming from that gets generated for output when you click on 'Publish'.
This is not an optimal solution, I feel that I'm beginning to hack around the default code for Adobe Captivate more than I should be expected to do. Is this really what others are doing to make what should be pretty simple and easy changes?
Additionally, I noticed that when I click on my checkbox, the 'checkBox_selected.png' will be drawn, but if I click on it again the 'checkBox_disabled.png' appears to be drawn on top of the previous 'checkBox_selected.png' which is not the behavior I would expect. I want to be able to see what is underneath the button if I click on it again in order to un-check the box and instead it draws the 'checkBox_disabled.png' on top, covering up the default text I need to see!
Below are my changes to CPQuiz.css (which were copied to the 'Published' file, but had no visible effect)
input[type=checkbox]:checked
background: url('../htmlimages/checkBox_selected.png') no-repeat center center;
-webkit-appearance: none;
border: none;
-webkit-background-size: 118px 53px;
.spanCheckBoxInput
position: fixed;
display: block;
width:118px;
height:53px;
Similar Messages
-
How to change the duration of multiple paint strokes
Hello everyone! Newbie here.
I should've set the paint properties to first frame instead of constant. Where properties of multiple clone stamps are easily modified at once, the duration shows as a percentage and so I can't figure out how to reset the duration to the first frame of the clone stamps.
I should've read the paint chapter of the After Effects manual before I made a mess but I haven't found my answer there.
I'll also appreciate any suggestions for scratches and noise removal filters.
Thank your for your help!edit:
For items already in the timeline, Select the each item in the timeline, right click and select "change speed" from the popup menu. You can not change the duration of a group of slides, only one at a time.
To change images that are already imported but not in the timeline, there are two ways to go - the brute force method and the item by item method.
Brute Force: Delete the stills from the Browser, change the duration of still setting in User Preferences>Editing to what you want, then reimport the stills. They will come in with the new duration. Changing the User Preference setting only affects stills imported after the change, it has no effect on material already in the Browser.
Item By Item: Go to the still in the Browser and change the duration for it. Right click on the time and copy it. Select the next still image time, paste the new time in, rinse and repeat. If you have a lot of stills and they are well organized (ie all in the same folder), the brute force is probably faster.
x
Message was edited by: Studio X to correct factual errors in the original post -
How do change the duration of multiple clips with timestreach?
All of the options are grayed out.
AdminID
What version of Premiere Elements and on what computer operating system?
Let us assume Premiere Elements 11, 12, or 13 on Windows 7, 8, or 8.1 64 bit for the purpose of an example.
1. Select all the clip on the Timeline (all at one time) that are being targeted for same duration change.
2. Right click anywhere in the selection, select Time Stretch, and, then in the Time Stretch dialog, change the duration 00;00;0O;00. (hours; minutes; seconds; frames).
Do you have one of those versions that I mentioned, making sure to select all the involved clips ahead of time before going
after Time Stretch?
Selections
If you want all the clips on the Timeline, then Edit Menu/Select All
or
Hold down the Shift key of the computer main keyboard, and, with the mouse cursor, click on each of the clips to be involved in this duration change
or
With the mouse cursor, draw a rectangle around the clips to go into the selection in order to select them
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR -
How can be changed the design of a Porlet of "Custom Search" type?
I´m making a Portal and I don´t know how to change the design of the Portlet "Custom Search"
Hi
Have you looked at the following documents on Portal Center (http://portalcenter.oracle.com/documentation)
OracleAS Portal Users Guide - Chapter 7 describes how to use the custom search porlet
OracleAS Portal Configuration Guide - Chapter 8 describes how to setup options that effect all Search portlets -
How can I change the length of multiple lines at the same time?
This just seems like it should be a no-brainer, but obviously for me it isn't. I'm trying to change the length of multiple lines, that are at different angles, at the same time, in CS4. Basically, I design the face of dials used for airplane instrument gauges (like RPM, Torque, etc), and they have gradiation marks (lines) located all around, similar what a clock looks like with the hour and minute gradiation marks (lines). Is there a way to select all the lines, that I know are the same length, and change it to a different length, that's accurate to the 1/100th of an inch? It would just be like selecting multiple lines that have all the same stroke, then using the stroke box to change the stroke weight from .025in to .030in.
I've used the transform box to change the 'height' of a line before, but the line has to be at 90 degrees (straight up and down), and that won't work for the lines that are at, say, a 45 degree angle.
I hope i'm explaining this in a way that someone will understand. If not, I can sure try to clarify more, or insert the picture so you could see what i'm talking about.
Thanks for any help you can give!OK, after fiddling around with everyone's ideas, I think I finally got it. I knew there had to be something with proportions between W and H, but couldn't figure out the math, until Jacob answered with:
"If each line must be strecthed from the inner/outer end, you may select each and use the Transform palette, choosing the right Reference Point, multiplying by the proportion in W or H (1.75/1.5), and Ctrl/Cmd clicking."
Now, I basically did everything above, (but I couldn't figure out what you were talking about with the Ctrl Clicking thing), except after figuring out the right proportion (which ends up being so small you guys would die if I told you the number; the numbers I gave earlier were just an example and much larger than what i'm really working with) I just clicked the little chain next to the W and H boxes to constrain the proportions. I then put the new number (multiplied proportion by whatever was in W) in the W box. The line lengthened perfectly toward the center of the dial, keeping the correct angle!
And Harron-Thanks for the link to Teri's, It is going to help with some things I do, but most of the dials I design don't have equal distances between each gradiation mark, and the blueprints I work off of usually have exactly what distances that the grad. marks are supposed to be. So, after selecting one of my grad marks that is already at it's correct place, I then use the rotate tool and Alt-Clicking the very center of the dial, I can then put in exactly what distance I want the next grad. mark to be at, I hit copy (instead of OK) and there will be a new grad. mark exactly the correct distance from my original. Then if I want to have the 3rd grad. mark I just hit Ctrl-D and it will copy another mark to the next position. I don't know if you necessarily wanted to know all that, but i thought i'd explain why I like doing it that way.
A BIG thanks to everyone! I'm really a AI newbie and am the only one at my company that knows how to use it, so I don't have anyone close to ask stupid questions to. So I appreciate all your help! -
How can I change the font to multiple titles at the same time?
Hey guys, quick question. I have a bunch of titles and lower thirds in my project and my producer decided that he didn't like the font we were previously using and wants to change it to a new one. He seems to do that pretty often. Is there a way to "globally" change the font to multiple title cards at the same time instead of clicking on each one separately and doing it manually for each one? And if there is no way to do that does anyone have any ideas on how to make it easier?
If you have any idea of design and fonts you would understand that "Title Cards" are not "exactly the same" if you change the font... because all fonts are not equal! Lower thirds are probably even more restrictive because they have design elements in them.
If you work with "change their mind producers"...the deal that goes with that is suck up their changes. (on a salary or otherwise)
I was just saying there is no way without scripting ..to change a title ( graphic) en masse ( in Premiere) and get it working because of font differences. -
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA
HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBAThanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
L_STATUS TYPE SWR_WISTAT-STATUS,
L_NEW_STATUS TYPE SWR_WISTAT,
L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
RECEIVING
RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
EXPORTING
WORKITEM_ID = LCL_L_WID
STATUS = L_STATUS
USER = SY-UNAME
LANGUAGE = SY-LANGU
DO_COMMIT = 'X'
IMPORTING
NEW_STATUS = L_NEW_STATUS
RETURN_CODE = SY-SUBRC
TABLES
MESSAGE_LINES = L_SWR_MESSAG
MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa -
How do I change the length of multiple photo's after I've added them?
How do I change the length of multiple photo's after I've added them?
Hey,
The best way to do this is to select all the clips by holding down the shift key or command key if the clips you want to change are not all right next to each other and then selecting each clip that you want to change. Then double-click on the clips which will open up the inspector tab and then you can change the duration. If you want to just change all clips to the same duration just double-click on one of the photos and in the inspector tab next to the durationt tab you will see a box that says "add duration to all clips". If you click that, when you change the duration all the photos will change to that duration. That will then change the duration of all the clips at the same time. -
How to change the selection background color of the selected item in the popup menu of the choice box ?
By defaut, the selection background color likes "blue", but if I want it to be "yellow" for example, how should I do ?
ThanksThe id is applied by (I think) the skin class of the ChoiceBox. You don't need to define it.
You have to apply the css in an external style sheet. You can apply the external style sheet to any parent of your choice box, or to the scene (the most usual way to do it).
Example:
import java.util.ArrayList;
import java.util.List;
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.ChoiceBox;
import javafx.scene.layout.VBox;
import javafx.stage.Stage;
public class ChoiceBoxTest extends Application {
@Override
public void start(Stage primaryStage) throws Exception {
primaryStage.setTitle("Example 2");
final ChoiceBox<String> choiceBox = new ChoiceBox<>();
List<String> tempResult = new ArrayList<String>();
for (int i = 0; i < 10; i++) {
tempResult.add("Item " + i);
choiceBox.getItems().setAll(tempResult);
VBox root = new VBox();
root.getChildren().add(choiceBox);
final Scene scene = new Scene(root, 300, 250);
scene.getStylesheets().add("choiceBox.css");
primaryStage.setScene(scene);
primaryStage.show();
public static void main(String[] args) {
launch(args);
choiceBox.css:
@CHARSET "UTF-8";
#choice-box-menu-item:focused {
-fx-background-color: yellow ;
#choice-box-menu-item .label {
-fx-text-fill: black ;
Message was edited by: James_D -
I cannot figure out how to change the photo size on my iPhone 5s. The first time I took a pic it asked if I wanted smalll, medium or large and listed the pixels. I chose small but am now finding that is too small. Can anyone help me set it to medium now? I can't find any setting for that. I'm a newby to iPhones and have no idea what I'm doing. Thanks for any help you can offer.
By "sending" do you mean sending email?
If so, what app are you using to take the photos on your iPhone 5? Or are the photos from a different source (saved to your Camera Roll from somewhere else, like a web page or Messages)?
My guess is that Mail gives you the option to send different file sizes when it detects you are trying to Mail a really large photo file. The size of photos on the iPhone 5 is really big and some email providers may stop your mail from being delivered if attachments are too large. Thus, Mail tries to help you by offering to resize the photo.
I suspect that if you are sending smaller files, Mail does not bother giving you options to save a smaller version. In fact, I have seen this behavior. So, if the photo is already "small enough", it gets sent as-is.
To my knowledge, there is no global iOS setting for this. Some apps may have different rules, of course. -
How would I change the variables in multiple methods with the user input?
Here is my code for a tic tac toe game I have to do for an assignment, it is currently set at the normal 3 x 3, but the teacher what the user to be albe to change these to between 3-5 before they start playing, here is my codeing
import java.util.*;
public class TicTacToe
Constructs an empty board.
private String[][] board;
private static int ROWS = 3;
private static int COLUMNS = 3;
public TicTacToe()
int size = in.nextInt();
board = new String[ROWS][COLUMNS];
// Fill with spaces
for (int i = 0; i < size; i++)
for (int j = 0; j < size; j++)
board[i][j] = " ";
Sets a field in the board. The field must be unoccupied.
@param i the row index
@param j the column index
@param player the player ("x" or "o")
public void set(int i, int j, String player)
if (board[i][j].equals(" "))
board[i][j] = player;
Creates a string representation of the board, such as
|x o|
| x |
| o|
@return the string representation
public String toString()
String r = "";
for (int i = 0; i < ROWS; i++)
r = r + "|";
for (int j = 0; j < COLUMNS; j++)
r = r + board[i][j];
r = r + "|\n";
return r;
I am having a problem figuring out how to change the variables ROWS , COLUMNS to the given user input, it seems easy but i can't really figure out how to do it
thanks ahead of timeimport java.util.*;
public class TicTacToe
Constructs an empty board.
private String[][] board;
private static int ROWS = 3;
private static int COLUMNS = 3;
public TicTacToe()
int size = in.nextInt();
board = new String[ROWS][COLUMNS];
// Fill with spaces
for (int i = 0; i < size; i++)
for (int j = 0; j < size; j++)
board[j] = " ";
Sets a field in the board. The field must be unoccupied.
@param i the row index
@param j the column index
@param player the player ("x" or "o")
public void set(int i, int j, String player)
if (board[j].equals(" "))
board[j] = player;
Creates a string representation of the board, such as
|x o|
| x |
| o|
@return the string representation
public String toString()
String r = "";
for (int i = 0; i < ROWS; i++)
r = r + "|";
for (int j = 0; j < COLUMNS; j++)
r = r + board[j];
r = r + "|\n";
return r;
}sorry for not posting code correctyl new to this forums
Thanks for the help but let me rephrase my question, the rows and columns are the same like 3x3, 4x4 ,or 5x5,
-when the program runs it will ask the user for what they want to set the tic tac toe at between 3 - 5.
My question is how do I get the code
Scanner a = new Scanner ( System.in );
System.out.print("Enter the size of the tic tac toe box to be between 3-5 : ");
int sizeTicTacToe = a.next();to change the variables of ROWS COLUMNS
I just want to know of a way to make the users input of sizeTicTacToe to change the variables ROWS & COLUMNS in my toString() and TicTacToe() methods -
How to change the storage location in Lightroom 3.6.?
How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times?
I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
Kind regards, KarinWould you really leave the names of photos like DSC05271.ARW and DSC05271.jpeg etc.?
What if I name them f.i. like ...
2013-09-11_Austria_1_mountain.jpeg
2013-09-11_Austria_2_mountain.jpeg
2013-09-11_Austria_3_valley.jpeg
I would NOT do this. I would not change the file name.
I would add keywords and other metadata to the photos to identify the content of the photos, and from that point on, I would use keywords and other metdata to search for these photos.
However, let's look at the big picture. I think there are three different methods of organizing
Organize via keywords and other metadata, and not via operating system constructs such as file name and folder name
Organize via operating system constructs such as file name and folder name, and not via keywords and other metadata
Some combination of 1 and 2
You can choose any one of the three methods above, the choice is yours. I am a very strong believer that for most people (and it sounds like you are one of those people), method 1 is the best method. However, not everyone agrees.
There are drawbacks to using file names to identify your photos. One big drawback is that you must type the information into each photo's name, and this is more tedious than if you wanted to assign the keyword "mountain" to the photos, you can assign the keyword to multiple photos at once. Also, if you mis-spell the information in the file name on any photo, you have just made the photo much harder to find; whereas in Lightroom, the keyword can be assigned via a mouse click (so you can't mis-spell it), or by typing the first few letters and Lightroom (auto-fill) will find the correct keyword name. So using keywords is a much simpler way to go.
.. is this much too complicated to do that in Lightroom or even dangerous to got lost of photos?
It is very simple to add keywords, as I explained for this case. Create keywords "Austria", "Mountain", "Valley"; then select the desired photos, and then click on the check box next to the keyword name. It is much more complicated in my opinion to rename the photos in this manner.
There is less danger in doing this via keywords than the danger doing this via file names, because of potential mis-spellings.
If I spend a lot of time in editing photos (in Lightroom or Photoshop) I don't want that I loose those photos f.i. later if Lightroom won't be the software I use regarding the photos (in 10, 20 years?!)
Lightroom will OPTIONALLY write your keywords and other metadata to the files (or sidecar files in the case of RAW). Every photographic application I know of (and I'm sure those in the future) can read the keywords and other metadata. So if you ever want to switch to some other software, your keywords and other metadata are available. you can turn this option on via Edit->Catalog Settings->Metadata, check Automatically Write Changes to XMP.
So I have to create two folders - one with the originals and one with the edited exported photos?
No, you do not have to create two folders. You don't have to export everything, but if you do, you can put the exports wherever you want, including putting them in the same folder as the originals, with different name.
Why not edit them in Photoshop and save them in the second folder which I import later in Lightroom? Because it takes longer?
Wow, you really need to think about: Why are you using Lightroom?
Could you explain this to me? Why are you using Lightroom?
If your goal is to edit the photos in Photoshop, and then put them in folders with whatever custom name you want to give them, then what is the benefit of using Lightroom? You can do all of this WITHOUT Lightroom. You keep explaining that your intended goal is to use Photoshop and folders/file names, and this is a goal which AVOIDs all benefits of Lightroom. I can't understand what you think the benefits of using Lightroom are for you.
It is starting to sound to me like Lightroom is not the right software for you.
Some people want to see a movie on their TV and are able to watch a DVD (not all!). Flickr seems to be a solution for movies in a big size (many GBs) to share them with friends (?)
You haven't mentioned this before, and you should check the rules on Flickr regarding how long a video you can upload. -
How to change the url of "Add New Item" of a particular list in SharePoint 2013???
Hi Guys,
How to change the url of "Add New Item" of a particular list in SharePoint 2013???
I need to redirect it into the page where I have created my Visual web part.
Please suggest
Warm Regards,
Tony JoyHi,
There are multiple ways to change the form url like javascript, SharePoint designer, custom code, editing default form to have custom web part etc, Please follow the url below that describe diffent methods and steps
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ec2769a0-683c-4023-8804-b596e4f92a3a/change-default-forms-on-custom-list?forum=sharepointcustomizationlegacy
Hope it helps!!!
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. Thanks, Ajeet -
How to change the size of the web item text in WAD 7.0
Dear All
I am quite new to WAD and I am having a problem with changing the font size of a web text item
I have searched already and someone suggested changing the Design property to HEADER1 or HEADER2 etc and then I should be able to change the font / size.
I have done this but to no avail
I want to have large heading across the top of the web template
am I using the wrong web item ?
I know I can key the text directly into the web template and change the font from the menu bar but I need it in an item as I want to export them through to PDF later
Would be grateful of any help
thanks
SandraThank you all for your quick responses (I will award points once this is sorted)
On the information you have supplied this has opened up yet another new part of WAD that I have not experienced ...TAGs
Shubhranshu - I have done what you said but as I have never used tags I have just had a look around and found that I can insert Any Tag but not sure if I should be doing that. If it is inert any tag , I chose FONT from the drop down and cbmAttributes defaulted into the custom tab for the class name but not sure what it wants in the Attributes and CSS Style tab, it won't accept what I am putting which is leading me to believe that I shouldn't be doing it that way.
Venkat - thanks for the links they will prove very useful. I've had a look and although they talk alot about the XHTML code for tags they don't actually say how you do it in the editor - I would like to produce one that way first and then see the code it generates for it. I'm a bit apprehensive with changing the code direct as I don't want to mess anything up.
Thanks again for your help -
How to change the default port of webdispatcher
Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
VadiHello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev
Maybe you are looking for
-
List_to_memory is not working in background
Hi Gurus, i am trying to use function module list_to_memory in background.in foreground i am able to send list to memory,but when comes to background it is throwing an error message( i .e list has not been moved to memory) . please help me <<Text rem
-
There s no sound when I connect my aux wire with my Bose dock
There s no sound coming when I connect my Aux wire to my Bose dock.but my internal speakers are working perfectly , there's no output through aux
-
hi all I have a FERT for which raw materials are assigned in the BOM. but while running MRP, the BOM is not being exploded and the list doesnt show the raw materials. I have checked in the Overall maintenance of the plant parameters in MRP in SPRO an
-
www.popularwoodworking.com gives this error: "Your PHP installation appears to be missing the MySQL extension which is required by WordPress."
-
Ever since I upgraded to 5.0.4 earlier tonight, all the photos I import into iPhoto have check-marks on them. I can get rid of them by dragging them to the keyword box, but it's very annoying. I don't want the check-marks, and can't figure out why th