How To change the status in Crm_dno_monitor under Status Field -F4 help

In Crm_dno_monitor transaction - on the Selection screen Status field comes , Now in that status Field F4 Help Shows the Standard status only, For Ex: Open, Super user,....ect,.
Now I want to display the our Z status in that F4 help of that status Field in that particular Crm_dno_monitor transaction.
please help it out .
Thanks,
Deepak Saini

thanks a lot dear frnd,
In crm_dno_monitor
how can i find that staus field ,currently using which status profile-statuses.how can i replace our status profile statuses in place of standard status profile-statuses.
(in crm_dno_monitor
just check for the field status profile and provide your status profile name.) - i did not got that point.
please give me the clear explanation.
Thanks and Regards ,
Deepak

Similar Messages

How to change the clip's duration under imovie 10.0.3?

How to change the clip's duration under imovie 10.0.3?

This is a new feature introduced in 10.0.3 which works fine for me. The old way was to select Modify - Fast Forward. You can only select certain speed ratios but a slider should appear near the top of the clip which allows finer speed adjustment. have you tried this?
Geoff.

How to change the text of a user defined field in dynamic selections?

Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
Ven

Madhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks,

How to change the screen element of a single field in a table control

Hi Gurus,
I want to change the screen element of a single field (or the whole row) in a table control according to a condition.
I have 2 columns in the table control. One is an input column and one output only. When user enters values into the input column, they need to be compared against the values in the other column, and if there is a discrepancy, the row where the discrepancy is needs to be highlighted.
I have tried the following code which highlights the whole column ...
CONTROLS: TC_ZVOYG_BINS TYPE TABLEVIEW USING SCREEN 0500.
DATA: wa_tc_zvoyg_col LIKE LINE OF TC_ZVOYG_BINS-cols.
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          wa_tc_zvoyg_col-screen-intensified = 1.
          MODIFY tc_zvoyg_bins-cols FROM wa_tc_zvoyg_col TRANSPORTING
          screen-intensified WHERE screen-name = screen-name.
        endif.
      endloop.
    endif.
endloop.
And also the following code which makes no change ...
LOOP AT G_TC_ZVOYG_BINS_ITAB
           INTO G_TC_ZVOYG_BINS_WA.
    if G_TC_ZVOYG_BINS_WA-zdelivery_bin ne G_TC_ZVOYG_BINS_WA-zactual_bin.
      loop at screen.
        IF screen-name = 'ZVOYG_BINS-ZACTUAL_BIN'.
          screen-intensified = '1'.
          modify screen.
        endif.
      endloop.
    endif.
endloop.
Thanks in advance.

Hi,
The modification of a screen element attribute (LOOP AT SCREEN...MODIFY SCREEN) must always be done in the PBO (for a dynpro, it will be in a PBO module, i.e. declared by MODULE ... OUTPUT)
About the loop at the internal table, it is done automatically by the system, also during the PBO, you'll find something like LOOP [AT itab] ... WITH CONTROL ... in the PBO part of the screen flow logic (note: you may have to complete with a supplementary READ TABLE if you don't use AT itab). So you don't need an additional loop.
Best regards
Sandra

How To display our Z*status in Crm_dno_monitor under Status Field -F4 help

Hi,
In Crm_dno_monitor transaction - on the Selection screen Status field comes , Now in that status Field F4 Help Shows the Standard status only, For Ex: Open, Super user,....ect,.
Now I want to display the our Z status* in that F4 help of that status Field in that particular Crm_dno_monitor transaction.
Let me know how it's possible,
Thanks,
Nirmal

Dear Saxena,
Thank's to Response,
We used our own Zstatus profile, So we want our Zstatus profile - status in F4 help in status field. Ex: we are using the Zstat status profile and we want to display Zstat status in status field by F4 help but now it shows the standard status only.
Thanks & Regards,
Nirmal
Edited by: Nirmal R on Feb 28, 2008 7:57 AM
Edited by: Nirmal R on Feb 28, 2008 7:58 AM

How to change the desription of a standard SAP field in the Search Help

Hi All,
In Table T023T there is a field WGBEZ60(Long text describing the material group) and the data element of the field is WGBEZ60.
Requirement is to change the description of the field WGBEZ60.The desription of the field is - Description 2 for the material group.
But the user want as - Description for the material group. He dont want 2 in the description.
we are using this field in the search help of Material group for the transaction ME21N and ME51N.
So please tell me how can we change the description of the field in the Search help.
Thanks.
Regards,
Peeyush

As search help uses data element , it shows its keyword. So you have to do modification to that keyword.
- Go to CMOD
- from top menu GOTO -> Text enhancements -> Keywords -> Change -> type WGBEZ60 -> change the description -> Save and add it to transport
- now use that data element either on the screen or search help. It will have the descripiton modified.
Regards
Marcin

How to change the default mail server??? Please help.

I need to change the default mail server to my yahoo account. When I had my PC this was easy but I cannot figgure it out on the MAC. I am in China and I need to inform my insurance company of some information or they are going to cancel a policy. When I go to their site for email contact what pops up is the apple email, which I do not have an account for and ofcourse does not work. Their email address does not show and I cannot find it anywhere so I need to change the default to my yahoo account. On my PC this was easy and when I went to a site that had a contact but no email address, my yahoo account would come up. I hope I am explaining this correctly. I really need to do this fast as the letter I got took some time to get here and I just returned from some field work so I have about 2 or 3 days to get the information to them. Thank you.

John,
This does not demonstrate anything for me, since it brings up a Compose window for Mail, with my preferred account as the From address. This happens whether I access with Safari, or with Firefox.
The point that I am trying to make, is that in OSX, there is no way to have web mail access become the default mail method -- it only works with a true mail client, for POP, IMAP or .mac access on your Desktop.
If you have the type of yahoo account that can be setup for POP access with Mail, then when you click, you can choose your yahoo address as the From address to send from.
Of course you can insert the address in a new message with your Yahoo web mail, but I have understood you to want to have the message start containing the info from one of the pages on the site?
See the discussion at the following link, for setting up a Yahoo account in Mail:
http://discussions.apple.com/thread.jspa?messageID=2760483&#2760483
Ernie

How to change the already synced voice memo status to not yet sync

Hi
When syncing my iPhone with my computer, some random error occurred and thus the syncing process was not completed and it was forced to stop. Due to this reason, i have 5 voice memos were not transferred into my computer but all of the voice memos were marked with today's date under the 'Date Added" column. In fact, they were all not transferred into my computer. Any advice or solution for this kind of problem?
Thanks in advance
Regards
Cashtom

edit: If Spotlight still cannot find it, then... (forgot not everyone uses Spotlight)
Backup, Restore (to factory default), Restore data from Backup.
iPhone and iPod touch: About backups
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

How to change the background color of a screen field

Hi All,
I have created a screen, in the output, the fields in the screen are having same color with the screen.
My client want the fields to be in the gray color.
For more clarification,
Goto SE11, Enter any table name, Click on display
In the next screen, observe the fields
Name, Short text, Last changed, Status are in the same color with the screen. Where as their values...
MARA, Material Master: General Data, etc are in the screen with gray background, I want in that way.
Any hint...
Thanks,
Kal Chand

hi
As i understand, in your scree u have taken "pushbutton" instead of taking "I/O field"
So make ur fields to "I/O fields"
Reward if it is helpful.
Thanks
Siva Kumar

How to change the Tab name for a custom field added in IC Winclient

I have successfully added a field using eewb and it is appearing on my transaction in CIC0 but it is on a tab that says Customer Fields. In EEWB a BADI called ZEEW_CUSTOMER_H01 was generated and it has a methods called CRM_CUSTOMER_H_SET_TITLE. It indicates you should be able to use this to rename the tab but the method is empty. Anyone have an example of the code you pass in to rename the tab screen. Thanks, Lisa

>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh

How to change the format of a decimal input field?

Hello,
When creating an input field of type decimal the numbers appear at this format: 123,123.
Is it possible to disable this format and let the numbers to be displayed like this: 123123 ?
Regards,
Roy

Hi Roy,
Create a simple type in local dictionary of built in type integer. In the representation tab you can give any format you want. For your requirement you can give ####### in the format. You can also try other formats like ##,#### etc. Now create a context attribute and in it's type property give the simple type you have created by selecting the appropriate folder. Now map this attribute with the input field.
Regards,
Jaydeep

Illustrator File Document Mode How to change the default?

Does anyone know how to change the default to RGB?
And, can anyone help explain why, when I put an .eps (logo) into a QUark 8 file and upload as PDF through distiller, the .eps file appears with a partial white box behind it - i need transparency.

Is it a one bit eps file, that is one color?
EPS is not a transparent format.
Have you tried Photoshop Quark 8 I believe supports photoshop files with transparent background. I believe.
Try exporting it as a psd. I also believe that Quark 8 supports .ai files as well.
http://8.quark.com/cs_integration/#top
http://8.quark.com/cs_integration/#top

How to change the status of clinical order header

Hi all,
I need to change the status (N1CORDER-WLSTA) of the clinical order header. I have found the way to change the status of the items and it works, but i dont know how to change the header status.
Now, for the items i do:
1- Create an object type cl_ishmed_prereg
2- Load the item (n1vkg-vkgid)
3- Use set_status method
4- Save the object
5- Commit work
So, do you know how i can change the status of the header? Im looking for other methods but...
Thanks,
Manel

In order to change the clinic order header status u have to:
1- Obtain the instance from item instance:
    CALL METHOD lv_prereg->get_corder
      IMPORTING
        er_corder = lv_corder
        e_rc      = rc.
2- Create a var type rn1_corder_x
3- Modify:
is_n1corder_x-wlsta = 'RE'. " new status
is_n1corder_x-wlsta_x = 'X'.
4- Use change mehod:
    CALL METHOD lv_corder->change
      EXPORTING
        is_corder_x     = is_n1corder_x
      IMPORTING
        e_rc            = rc
      CHANGING
        cr_errorhandler = cl_error.
5- Save:
CALL METHOD lv_corder->if_ish_objectbase~save
6- Commit work
Regards,
Manel

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

How to change the status in emigall

Hi All,
Can any body please let me know how to change the blocking status of each object to '000' instead of the default '100'(Blocked) in emigall.
Thanks

Hi,
a blocking status ending with 1, 2 or 3 does not allow further changes on object level. In order to 'unblock' the object you must execute the following steps (let's assume you change the blocking status of migration object PARTNER):
(1) copy the migration object PARTNER either into the same migration company (with a new name) or into another migration company in order not to loose the customizing of the blocked migrationobject PARTNER. The name of the copied migration object might be PART_TEMP. A copy allways sets the blocking status of the copied migration object to 100. You can now continue working with the copied migration object for follow the steps (2) - (4) to have a migration object back with the original name.
(2) Delete the migration object PARTNER with the blocking status 002. For this select Utilities -> Delete MigObjects and delete the migration object PARTNER
(3) copy the copied migration object PART_TEMP back with the name of your original migration object PARTNER.
(4) Delete the migration object PART_TEMP.
Alternatively, if you changed the blocking status accidentially in the development system, you may change the field TEMOBS-SPERRSTATUS back to 000 with a direct update.
Kind regards,
Fritz
PS: There will be a correction soon warning the user with a confirmation popup.

How To change the status in Crm_dno_monitor under Status Field -F4 help

Similar Messages

Maybe you are looking for