How to change the Test UUTs UI?

I am having a bit of an issue with finding where to change the attached UI. I am trying to do something that I would perceive as easy, but I guess since I am a novice at using CVI, it makes this more difficult.
I believe that Test Stand is calling Modelsupport2.dll and I have tried finding in the source code what UI is being called, but I have not had any luck locating it. I may be going about this the wrong way and I get this funny feeling that I am just spinning my wheels.
Anyone have any links to some helpful information, or know where I can find this UI to change it's appearances? I have tried searching the forums here, but since I am not the most certain on the name I am searching for, it makes it difficult to find what I need.
Thanks.
Bill
John 3:16
Attachments:
My UI.doc ‏38 KB

Well my intention is not to look silly...but ya.
I should've been a bit more clear with where I am at. I have found the model data and the project files that I am interested in, modelsupport2.prj. I have toyed a bit with the "modelpanels.uir" file and the "paralleluutdlg.c". What I am looking to do is quite simple, I just want to increase the size of the SERIAL_NUM text box in the "modelpanels.uir" file. Do I need to physically change the size of the text in the .uir file and then recreate the modelsupport2.dll? I was searching through the "paralleluutdlg.c" to see if i could find an area where it sets the size of the serial number text box (I am assuming this is not the case, but I can't assume anything while trying to learn this) and didn't seem to find anything.
I am not much of a coder, being a EE myself, i have little to no experience with this stuff, so excuse my incompetence. Also if you would like me to post the .c files and all that feel free to ask and I will. I am also using test stand 3.5.
Thanks,
Bill
John 3:16

Similar Messages

How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

Thanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
    me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
        L_STATUS TYPE SWR_WISTAT-STATUS,
        L_NEW_STATUS TYPE SWR_WISTAT,
        L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
        L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
    RECEIVING
      RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
    EXPORTING
      WORKITEM_ID    = LCL_L_WID
      STATUS         = L_STATUS
      USER           = SY-UNAME
      LANGUAGE       = SY-LANGU
      DO_COMMIT      = 'X'
    IMPORTING
      NEW_STATUS     = L_NEW_STATUS
     RETURN_CODE    = SY-SUBRC
    TABLES
      MESSAGE_LINES = L_SWR_MESSAG
      MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa

How to change the HTML/XML test data to test my_abap_proxy in SE80?

Hello,
I am trying to test my_abap_proxy in SE80 by usng a HTML/XML file of my desk top, the test data is as below
<LoadingDate>20110422</LoadingDate>
<DocumentDate>20110422</DocumentDate>
<SDDocumentCategory>G</SDDocumentCategory>
so on.......
Now, i want to change the Loading date in this test data, so, i tried after Loading file in Test Service Provider screen of my_abap_proxy of SE80, but i could not make change ANY data in this test data, pls. let me know how to change the data?
Thank you

Hello ABAP_SAP_ABAP ,
Youneed to select the option "generate template data " and then on the displaying template there you will see the option for editing in the top left corner toolbar.
Then after editing you can do a XMl syntax check and test your proxy.
Hope this helps.
Thanks,
Greetson

How to change the default Path of Prompt Played by MicroApp

Hi
I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
Please advice how we can customize the MicroApp Media path.
regards
Kapil Kumar

Hi Kapil,
Try this in your ICM script, define set variables i.e.
set Media Server= ip address of media server
set Locale = en-us
set input Type = DTMF only
set App Media Lib = " you new location i.e. test "
So, the application path will be
http://media server ip address/en-us/test
hope this helps.
Cheers

How to change the initial page without open safari

Hi everybody,
I have problems opening my safari because of the plugin silverlight. I defined a tvair.swisscom.ch page as initial and it makes an error open it. it means that my safari doesn't work at all.
i want to know if somebody knows how to change the initial page from safari without open safari and solve this problem.
thx
cheers
nun

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.Safari.plist
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test. Optionally, restore the file from a backup that predates the problem.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to change the color of SAP screen?

Hi Frens,
I know it has nothing to do with SD Community, but still I am asking. Can anyone tell me "How to change the color of SAP screen?" It is needed especially when you are working on System Landscape including PRD, Qua & Dev. There are chances that you end up making a test case in PRD instead of Dev or Qua. To avoid that, different color of SAP screen may be very useful and safe.
Regards
Vikas Chhabra
SD/CIN Consultant

We had a clone of SAP for testing
Only GUIXT solution was available for users to distinguish between real Prod & Clone as SID was same
Created 2 scripts n C:\guixt\scripts
saplsmtr_navigation.e0100.txt
Esession.txt
BOTH having identical code
if V[_ashost=10.3.3.18]
TitlePrefix "CLONE18"
TitleSuffix "(CLONE8)"
endif
if V[_ashost=10.3.3.25]
TitlePrefix "PROD25"
TitleSuffix "(PROD25)"
endif
After much research - this was only solution.
GUIXT will be around; like SAPSCRIPT & SMARTFORMS
despite the enticement of Adobe Forms!
After some time you may set GUIXT profile start window HIDDEN
This you do by clicking profile button of GUIXT menu
If you want to see GUIXT Window again
CMD.exe Dos prompt
cd C:\Program Files\SAP\FrontEnd\SAPgui
guixt visible
Regards
Jayanta Narayan Choudhuri
Kolkata
URL: http://ojnc.byethost11.com

How to change the status in the table kssk

Hi ,
In document management system - for a doc type pdf, I am maintaing the class (cl_xxx) in img setting. some charateristics are assigned to that class (with entry required).
My problem is While creating the document (cv01n). I am not assigning the value for that char ( i.e in addition data), eventhough it is mandatory .
In the table kssk , For that particular document , status is set to 5 . how to change the status .
note :
In cv04n - if i search wrt to that charateristic in the classification tab. i am not able to get the value.
Please help me to solv the problem.
Regards,
Rani.

hi you can do like this also if it is a test server..and y had the authoridation..
togo the table -supposekkkk-execute-select a particular record--double click it ---then it will display it in the vertical line..
then put /h in the tcode listbox and put enter--debugg it and change this if code = 'SHOW' as EDIT. execute it and change it and save it..
regards,
venkat.

How to change the speed of a slideshow

How to change the speed of a slideshow

In my test, all I need do was right click the clip and make sure Frame Blend was not checked.

How to change the color for HTML words in JEditorPane?

Hi Sir,
In the JTextPane , we could change the word's color by using:
Style style = doc.addStyle("test",null);
StyleConstants.setForeground(style, Color.red);
doc.setCharacterAttributes(10,20,syle,true);
we can change the text into red color,which range is from 10 to 30.
But how to change the color for HTML words in JEditorPane?

Hi,
you can use an AttributeSet to apply the foreground color. Let's say, doc is a HTMLDocument, then SimpleAttributeSet set = new SimpleAttributeSet();
doc.getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D"); would apply a color to a given AttributeSet. The AttributeSet with your color then can be applied to a selected range of text in a JEditorPane by /**
   * set the attributes for a given editor. If a range of
   * text is selected, the attributes are applied to the selection.
   * If nothing is selected, the input attributes of the given
   * editor are set thus applying the given attributes to future
   * inputs.
   * @param editor the editor pane to apply the attributes to
   * @param a the set of attributes to apply
public void applyAttributes(JEditorPane editor, AttributeSet a) {
    ((HTMLDocument) editor.getDocument()).getStyleSheet().addCSSAttribute(set, CSS.Attribute.COLOR, "#0D0D0D");
    editor.requestFocus();
    int start = editor.getSelectionStart();
    int end = editor.getSelectionEnd();
    if(end != start) {
      doc.setCharacterAttributes(start, end - start, a, false);
    else {
      MutableAttributeSet inputAttributes =
        ((SHTMLEditorKit) editor.getEditorKit()).getInputAttributes();
      inputAttributes.addAttributes(a);
} Ulrich

How to change the database in Crystal reports

To give an overview there is one project going on where the oracle database is getting migrated from 10g to 11g.
All the details of database like IP, port etc are changing as part of this.
I can see the driver name configured as crdb_ado (Custom driver).
We have an test environment for 11g against which we have to point all the reports and test it.
Could you please let me know the below queries
Where and how to change the IP details in the crystal reports to point to new test and prod databases.
Overview on this crdb_ado driver
Basically the database is getting changed and we want the reports to point and run from the new database.
Thanks

Hi Vissu,
Thanks for your reply.
We need to change the database from the reports which are already running from central management console.
I can see a custom driver crdb_ado is being used and it connects to a database.
Could you please let me know where the database configuration is done.
Ideally we need to add one more database to a config file which i am not able to find.
I guess it should be similar to tnsnames.ora file in oracle where the different databases are stored.
From the above image I would like to know where the server details (NECTAR_Prod) would be configured.
Thanks in advance

How to change the transaction isolation level of a CMP?

How to change the transaction isolation level of a CMP from SUN's Deployment Tool? So far I can't find any entry for this setting.

Anuradha W wrote:
That means, currently the only way tospecify the transaction level is through
weblogic-ejb-jar.xml deployment descriptor?
for WLS-generated code, yes.Somewhat related to this question, we have written a standalone testcase to reproduce this issue we have been having. Basically, the issue is that even though we configure the isolation level to a non-default one in the deployment descriptor, the connections returned by the datasource seem to be having the default (which is Read Committed). The DBMS is DB2.
weblogic-ejb-jar.xml has the following set:
<isolation-level>TransactionRepeatableRead</isolation-level>
And we printed the isolation level of the connection returned from a method in the EJB, but the isolation level is still the default. I can share the code to reproduce the problem if you want to take a look at it. Please let me know how I can get that across to you.
Thanks,
AnuradhaIf you are using our JDBC driver for DB2, or can switch to it,
just for a test, there is some debug I'd like from you.
Joe

How to change the instance_name

Hi guys,
I am a member of OTN, and I am interested in installing Oracle DB and OAS9i on Linux RedHat platform, and I hope it can be used for my company in the future, so I just download the OAS9i for Linux testing use first, and I follow the Installation guide to setup, but I got a problem - How to synchronize the origin database name with its SID by changing the origin database name? As my db_name and instance_name are different, and I want the instance_name is the same as db_name, is there anybody can do me a favor, and tell me how to change the instance_name and let it the same as db_name?
Thanks in advance for any kindly suggestion and help.
Best Regards!
Frank

Sarwar, I don't quite follow you, after I enter Net8 assistant, I just can find there are three items listed under Local-Service naming: for example,
oracle1.mydomain
inst1_http.mydomain
extproc_connection_data.mydomain
as I had already reinstalled Oracle database once, the previous instance_name is ex:oracle, and after uninstall and reinstall the
database with SID ex:oracle1, but maybe something I didn't remove
completely, now I found my db_name and instance_name are diff,
now my db_name is oracle, but my instance_name is oracle1, and
I want them to be the same, but I don't know how to change
the instance_name to the same as db_name, so Sarwar, as I listed
above, how can I choose different service name and let my database instance_name the same as db_name?
Or anybody know the detained instructions to remove oracle database completely? I would like to remove the database again
and reinstall it if I can't fix the problem.
Help! Is there anybody can help me?
Thanks in advance!

How to change the "content created" date/time in FCPX?

Since I've had problems importing my whole iMovie event library into FCPX I decided to run some tests with importing individual files (part of iMovie events and originally imported from camera into iMovie). Some of them for some reason got the wrong "content created" date/time in them while in iMovie they have the right date/time set. Does anybody have an idea on how to change the "content created" timestamp?

I had a bunch of DV files that imported stamped with the file modification date and time. I did not find a way to change it in FCPX. With FCPX not running, I used A Better Finder Attributes to modify the creation and modification dates of the files in the event folder. FCPX reconnected to them but the event still showed the old range of dates so I created a new event and moved the clips to it. Maybe ther is a beter way but that is how I did it.

Win10 blurry fonts/programs | How to change the accent color?

Hi,
Recently I installed Win10 Build 9926 on a virtual machine for testing and feedback and I am havin' some problems...
First, I changed the Display settings to 125% and now the third-party Win32 classic apps are looking blurry... [Sorry, i can't provide a image link]
Second: The Personalization "pane" (Sorry, long time mac user) only has options for the lock screen and now I dont know how to change the accent color...
And this, I can keep with it, but I made a registry tweak to enable the start screen but now when I use it the taskbar is still there!!! ANNOYING!
Any help will be appreciated...
Thx,
Tiago

Hi,
I made a test in our testing enviroment, found that when this problem occures,
Sign Out current user and login again would be helpful to resolve this problem. Please take this method as a workaround temporarilly.
Second question, to modify backgound color, you can access system personalize to modify the color:
Roger Lu
TechNet Community Support

How to change the icon of JOptionPane and JFileChooser in swing

Hi,
Does any body know how to change the icon of JOptionPane and JFileChooser in swing.
Please help me out in this.
Thanx in advance.

Try this
import javax.swing.*;
import java.awt.event.*;
public class Untitled4 {
public Untitled4() {
public static void main(String[] args) {
    ImageIcon i = new ImageIcon("C:/TestTree/closed.gif");
    JOptionPane p = new JOptionPane();
    p.setMessage("This JOptionPane has my icon");
    p.setMessageType(JOptionPane.QUESTION_MESSAGE);
    p.setOptionType(JOptionPane.YES_NO_CANCEL_OPTION);
    final JDialog d = p.createDialog("test");
    d.setIconImage(i.getImage());
    d.setVisible(true);
    d.setModal(true);
    if(Integer.parseInt(p.getValue().toString()) == JOptionPane.YES_OPTION) {
        System.out.println("You Clicked Yes");
}

How to change the Test UUTs UI?

Similar Messages

Maybe you are looking for