How to change the timezone

Hi,
I have created a scheduler job during day light savings, the timezone when the job was created is -4.00 and the job ran successfully.
Now after the day light savings the job ran an hour earlier than before because of the dst. now the timezone is -5.00
I dont want to change the dbtimezone instead
do we have an option to alter the job to change the timezone of the particular job or do i need to recreate the job with needed timezone ???
Thanks in advance

1)Export the calendar to an iCal File
2)Use your favorite Textedito to replace
DTSTART: by DTSTART;TZID=Europe/Berlin:
DTEND: by DTEND;TZID=Europe/Berlin:
EXDATE: by EXDATE;TZID=Europe/Berlin:
RECURRENCE-ID: by RECURRENCE-ID;TZID=Europe/Berlin:
inside any VEVENT block. Take care not to change anything in the VTIMEZONE block at the beginning of the file.
3) Save the file and reimport it to a new iCal Calendar. Double check the imported events against their counterparts in the calendar exported.

Similar Messages

  • How to change the timezone in photo metadata?

    After returning from a recent trip out west, I forgot to change my camera's timezone to the local time.  As a result, hundreds of photos from a long weekend trip were recorded with the wrong timezone.  I imported them to Lightroom 5 and discovered the problem.  Of course, I used the Edit Capture Time feature as described in the online help: https://helpx.adobe.com/lightroom/help/metadata-basics-actions.html#change_the_photo_captu re_time
    But that changes the time of each photo's metadata, rather than the timezone.  There's a subtle difference; the better solution would be to change the timezone so that all future interpretations and exported times would be correct.  For example, here's the original metadata from a RAW image:
    DateTimeOriginal                : 2014:08:23 09:13:45
    Timezone                        : -07:00
    and here's what appears on an exported JPG file, after the capture time was edited:
    DateTimeOriginal                : 2014:08:23 11:13:45
    TimeCreated                     : 11:13:45
    DigitalCreationTime             : 09:13:45
    DateTimeCreated                 : 2014:08:23 11:13:45
    DigitalCreationDateTime         : 2014:08:23 09:13:45
    [These metadata reports were produced by exiftool.]  Notice how the RAW image includes Timezone (though sadly the JPG export does not).  More to the point, look at the variety of timestamps produced for the JPG file, none of which mention the timezone and two of which have the wrong time (9:13am instead of 11:13am).  Without the timezone information the latter is hard to interpret and looks inconsistent.  Is this a bug in LR5?  or is it a missing feature (to not record the timezone on export)?

    There's not a simple explanation of the behavior you're observing.  It's not a bug -- LR is doing a reasonable job of following imperfect industry standards. 
    The photo/camera industry in general does not make it easy to deal with time zones. LR's general approach is to preserve whatever time zones are present in the metadata but otherwise ignore them -- it doesn't change them, and it doesn't display them. As you discovered, the Edit Capture Time command does not let you change time zone, but it does preserve whatever time zones are present in the metadata  (but see below for one exception).   LR's handling of time zones conforms with Metadata Working Group's Guidelines For Handling Image Metadata 2.0, an industry standard supported by Adobe, Apple, Canon, Microsoft, Nokia, and Sony.
    The EXIF metadata inserted by cameras does not provide an official field to record time zone (folklore among metadata geeks is that one of the technical leaders of the spec, when challenged about that, asked why anyone would want time zones).  Some cameras insert the non-industry-standard EXIF field TimeZoneOffset.  I don't know the entire history of this field, but it's not defined in the EXIF 2.2 or 2.3 specs, nor mentioned in the Metadata Working Group's Guidelines For Handling Image Metadata 2.0.  The field is not well-defined -- it only allows offsets of whole hours, whereas over a billion people live in a time zone whose offset is +5:30 (India). 
    LR preserves EXIF:TimeZoneOffset in your original photo, but it otherwise ignores the field, and it doesn't get copied to exported photos.  This is not unreasonable, given that the field is non-standard.
    The XMP metadata fields, typically inserted by software applications, do support time zones, but including a time zone is optional.  LR preserves XMP time zones that are present when the image is imported, even if you change the date/time with Edit Capture Time.  Your original photo did not contain any XMP fields (cameras typically don't insert XMP), so there were no time zones there for LR to preserve.
    The Digital Creation date/time fields you observed are intended to record when an image was digitized.  With digital cameras, that's generally the same as capture time, but with scanned images, the date/time of digitization (scanning) is different from the date/time the image was originally captured.  LR's handling of these two different date/times isn't great, but it's adequate for most users.  LR will insert the digitization date/time when an image is first imported (if it doesn't already exist), but Edit Capture Time changes just the capture time, not the digitization date/time.  (A few years ago Adobe changed Edit Capture Time in a point release to also change digitization date/time, on the theory that LR is designed for images from digital cameras, and the two date/times should always be the same; but a number of users who also used LR to manage scanned images complained loudly that LR was overwriting precious metadata, and Adobe backed out that change in the next release.)
    So Edit Capture Time will leave photos taken by digital cameras with an incorrect digitization date/time.  But very few users care about that -- it's only users with scanned images who care about the difference, and at least LR will avoid overwriting digitization date/time.
    A suggestion for using Exiftool to examine image metadata: Use the "-a -G" options, which causes Exiftool to show which section of the metadata the fields are coming from.   Given the complexity of the legacy metadata industry standards, this will help you better understand what your camera and software tools are doing.  For example:
    [EXIF]          Modify Date                     : 2014:08:31 10:01:45
    [EXIF]          Date/Time Original              : 2014:08:13 11:53:44
    [EXIF]          Create Date                     : 2014:08:13 08:53:44
    [IPTC]          Date Created                    : 2014:08:13
    [IPTC]          Digital Creation Date           : 2014:08:13
    [XMP]           Modify Date                     : 2014:08:31 10:01:45-07:00
    [XMP]           Create Date                     : 2014:08:13 08:53:44
    [XMP]           Metadata Date                   : 2014:08:31 10:01:45-07:00
    [XMP]           Date Created                    : 2014:08:13 11:53:44
    [Composite]     Date/Time Created               : 2014:08:13 11:53:44
    [Composite]     Digital Creation Date/Time      : 2014:08:13 08:53:44

  • How to change the timezone of all iCal events?

    Hi!
    After importing some items from another calendar most of my iCal events are "floating" and not fixed to any timzone. I would like to have them all in "Europe/Germany". Does anyone know howto set the timezone of all calendar events in one step together? Is there perhaps a solution in AppleScript?
    Thanks in advance!
    SomeBdyElse
      Mac OS X (10.4.8)  

    1)Export the calendar to an iCal File
    2)Use your favorite Textedito to replace
    DTSTART: by DTSTART;TZID=Europe/Berlin:
    DTEND: by DTEND;TZID=Europe/Berlin:
    EXDATE: by EXDATE;TZID=Europe/Berlin:
    RECURRENCE-ID: by RECURRENCE-ID;TZID=Europe/Berlin:
    inside any VEVENT block. Take care not to change anything in the VTIMEZONE block at the beginning of the file.
    3) Save the file and reimport it to a new iCal Calendar. Double check the imported events against their counterparts in the calendar exported.

  • How to change the =now() timezone

    How would I go about changing the timezone of the =now() function to a more local time?
    Whenever I enter =now() into a cell, it gives me what I believe to be the pacific timezone; is there a way of changing the timezone? It doesn't seem to be affected at all by changing the timezone in my Icloud settings...
    Thanks a lot for the help guys.

    How would I go about changing the timezone of the =now() function to a more local time?
    Whenever I enter =now() into a cell, it gives me what I believe to be the pacific timezone; is there a way of changing the timezone? It doesn't seem to be affected at all by changing the timezone in my Icloud settings...
    Thanks a lot for the help guys.

  • How to set the timezone in a DATE datetype?

    How to set the timezone in a DATE datetype?
    Thanks
    Maximus

    10.5 Date, Time, and Timestamp
    The JDBC API follows the Java platform's approach of representing dates and times as a millisecond value relative to January 1, 1970 00:00:00 GMT. Since most databases don't support the notion of a time zone, the JDBC 2.0 API adds new methods to allow a JDBC driver to get/set Date, Time, and Timestamp values for a particular time zone using a Calendar. For example,
    ResultSet rs;
    Date date1 = rs.getDate(1);
    returns a Date object that wraps a millisecond value which denotes a particular date, like January 3, 1999, and a normalized time 00:00:00 in the default time zone. The time component of the Date is set to zero in the default time zone since SQL DATE values don't have a time component. Since a Calendar was not supplied explicitly to getDate() , the default time zone (really the default Calendar) is used by the JDBC driver internally to create the appropriate millisecond value assuming that the underlying database doesn't store time zone information.
    The following example retrieves a date value in GMT-Greenwich Mean Time.
    ResultSet rs;
    TimeZone.setDefault(TimeZone.getTimeZone("GMT"));
    Calendar cal = Calendar.getInstance();
    Date date2 = rs.getDate(1, cal);
    In the example above, a Calendar is passed explicitly to getDate() to inform the JDBC driver how to calculate the appropriate millisecond value. Note that the same result could have been achieved by simply changing the default time zone, and not passing the Calendar explicitly since the JDBC driver will use the default time zone by default.
    Note that the two Date objects created above will not compare as equal assuming that the default time zone is not GMT, even if they represent the `same' date.
    if (date1.equals(date2))
    //never get here
    This is because each Java language Date object really just wraps a normalized millisecond time value and these millisecond values will differ across time zones. If an application wishes to compare dates in different time zones it should first convert them to a Calendar.
    An application should create a Date object using a Calendar. The application is responsible for specifying the time as 00:00:00 on the desired date when using the Calendar since JDBC uses this convention. In addition when creating a Time value the application must specify a date of January 1, 1970 to the Calendar used to create the millisecond value for the Time as this is the convention specified by JDBC for time.
    Above from:
    http://java.sun.com/products//jdk/1.2/docs/guide/jdbc/spec2/jdbc2.0.frame10.html
    I hope it can help you!

  • How to change the OraSSO login link in webcache/load balance

    Hi
    we have 10gAsR1 installed as a Portal instance. We have 6-server
    load balancer => webcache as loadbalancer (listening port 80)
    Wb ch1 and wb ch2 => webcache (listening port 7777)
    portal1 and portal2 => Portal listening 7778
    infra =>Infrastruture with repository Portal/Oracle SSO (listening 7777)
    This set up is working fine for our intranet setup, now we need to open this for couple of external clients. Well initially we need to open on the load balancer server on port 80 for external team to access, it works fine when we make it publc access.
    Now when we need to make it SSO (siteminder) enables, when users click on login link it first goes oracle sso then it internally redirects the page to site minder sso.
    Well, I have noted that the sso server details are mentioned in global setting sso/oid details. Since we need to open this for external client we have to add a DNS entry for this so that we can allow its access over firewall..
    Now I have made DNS name change at my infrserver level, now I need to update the change at the load balancer server (where wheb chache is running).
    Any one know how to chang the URL at load balancer.
    I am struck at this point please suggest how should i proceed..
    Thanks,

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the privacy statement link url

    I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
    I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
    I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
    Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
    Thanks
    karan

    Extract from Personalization Guide - Page Footer - Personalization Considerations
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
    * If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

  • How to change the default apex port

    hi,
    i am installed apex4.0 in EBS R12 DB with HTTP Server method. my apex is running from application server 10g and default port is 7777.
    URl: http://hostname:7777/pls/apex
    My EBS R12 running on http://hostname:8007.
    is it possible to change the apex port to EBS Apache port(8007) in R12 and finally i want to change above URL like this
    Before change : http://hostname:7777/pls/apex
    After Change : http://hostname:8007/pls/apex
    Thanks in advanace....

    How to Change the Default SSH Port from Terminal ?
    now showing default SSH Port 22 i need change it pls help me how can do

  • How to change the default Path of Prompt Played by MicroApp

    Hi
    I need to store all the Self Service application prompts in dedicated Media Server. I can modify location of all the Media files by passing the related URL form CVP application, however I need to know how to change the default location of Prompt file played by Play Media Microapplication in ICM Scripting.
    Currently the default location taken by Play Media Micro App is the Media _Server.variable path set for VXML Server location while I have a separate Media Server.
    Please advice how we can customize the MicroApp Media path.
    regards
    Kapil Kumar

    Hi Kapil,
    Try this in your ICM script, define set variables i.e.
    set Media Server= ip address of media server
    set Locale = en-us
    set input Type = DTMF only
    set App Media Lib = " you new location i.e. test "
    So, the application path will be
    http://media server ip address/en-us/test
    hope this helps.
    Cheers

  • How to change the default SSH port on Cat 6500 WS-SUP720-3B

    I have been net searching this question and I find answers relative to other Cisco products but not for the 6500 series. We are running
    entservicesk9_wan-mz.122-18.SXF17a.bin and would like to know how to change the default SSH listening port..
    Thanks in advance..

    Hi Neil,
    Normally this is achieved via the "ip ssh port rotary " but unfortunately, this command is not implemented on your platform so ssh will only work on port 22.
    Regards,
    Nicolas

  • How to change the Default login script and the USER login script in Netware3.12

    I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
    please tell me
    how to change the Default login script and the USER login script in
    Netware3.12 ?
    Or is there any other ways to do this thing?
    Thanks a lot!

    On 4/6/2006 [email protected] wrote:
    > how to change the Default login script and the USER login script in
    > Netware3.12 ?
    Please repost in the discontinued.forums.
    Edison Ortiz
    Novell Product Support Forum SysOp
    (No Email Support, Thanks !)

  • How to change the default database charset to ISO8859-1?

    Hi all,
    I have created a table with a nvarchar field to store string, may i now how to change the default NLS charset to ISO88591 charset?
    Thanks in advance.
    chin.

    Thank you!
    I will try later!
    But,who can tell me more detail !
    thx

  • How to change the default time?

    when you finish the action of dialing ,the CCM system recognize your finish after 10s .How to change the default time in Service Parameters ,which is the detail Parameters ?

    Please see the following link for information on configuring the interdigit timeout.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00800dab26.shtml
    Hope this helps. If so, please rate the post.
    Brandon

  • How to change the default currency in CJ32 and CJ33

    Dear all,
    As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
    Could any one help me? Points will be awarded.
    Thank you.
    Christina.
    Edited by: Virendra Pal on May 5, 2010 8:34 AM

    Hi Christiana ,
    Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
    Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
    Regards
    Judy

  • How to change the default "Safe" files in Safari?

    I would really appreciate if anybody could teach me how to change the default "Safe" files using AppleScripts, Folder Actions or .plist files. I really would like to have some files to open automatically after download, specially .pps files, and safari doesn't recognize such files as "safe". I tried to find out reading the help files but got lost.
    I posted a reply in an old topic for somebody who seemed to know, but it was not related to that topic, so I decided to open a new one.
    I'll be gratefull for any help. Thanks.

    Hi MDRC,
    Have a read of [this topic|http://discussions.apple.com/thread.jspa?threadID=1237961] to see if that helps.

Maybe you are looking for