How to change the transition time for a title in the new imovie

With the new update I have lost how to do a simple task.
I have titles in the lower left hand corner ine a video (pictured below). I would like for the titles to change seamlessly, without blinking after each new title appears. Sort of like a digital clock ticking. So say there's a video clip for each day in August, I want the date to change without blinking and re-appearing each time. This was easy in the past version of imovie. But I can't seem to find it in this version.
Any help would be greatly appreciated!
The red box indicates that I have attempted to merge the title into the title that comes after to see if it blends the transition, but it still blinks before showing the new title.
Movie Version 10.0

Please take a look at the usage of the precision editor it's very powerfull as are a lot of functions in iMovie10.
http://help.apple.com/imovie/mac/10.0/#movf8b8fc9b2
(I hope it directs you to the English version). And of course I asume you have the latest version (10.0.3) which solves al ot of the earlier problems.
In case you understand some Dutch. I've produced a number of video-tutorials on the usage of iMovie10.
http://www.videoidee.nl/iMovie/imovieindex.html
Part 5 2nd half explains the usage of the precision editor in detail.
If you don't follow my Dutch, google for iMovie10 tutorials  and you will find lot's of video-tutorials in English.
Have Fun
Ben

Similar Messages

  • My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black

    My sons iPod touch stopped working, it won't charge in a docking station and the computer/itunes won't recognize it when connected.  We have tried holding the power and home button at the same time for several seconds, and the screen still stays black.  Thanks!

    Hello skdog I possibly think your ipod touch is black because it has not charged. If your dock is broken it might just mean the dock will be broken and so might be the USB port. You should see an Apple shop nearby and hand it over and see what they can do. I hope this information works!

  • How to Change Default Transition Time?

    In FCE, how do I change the default 1 sec period of a transition, Cross Dissolve for example?
    Also, can I apply a transition to a series of clips in the Timeline rather than individually for each clip using the Canvas.
    I'm trying to improve my efficiency as I make a slide show of many still pics with transitions.

    In FCE the only workaround is to alter the transition in the Viewer and drag the altered transition back into the Browser>Favourites Bin.
    When you edit using this transition in the future it will assign at the altered value each time it's used.
    Think of it as auto assigned transition that has to used manually each time.
    Al

  • How to change goods receipt time for a plant?

    Hi All,
    How do I change the goods receipt time for a plant?
    Thanks for your help!!!
    Rana

    hi,
    GR time is defined for the specific material ..it is defined as GR processing time..in the Material master in the MRP view...
    Pls check ...
    Hope it helps..
    Regards
    Priyanka.P

  • How to change auto logoff time for Essbase AddIn when Essbase server is in Shared Services mode

    Hi all,
    could anybody describe me the way to change the auto logoff time for the Essbase Excel AddIn? I only know the possibility to change the properties in the EAS console, but our Essbase Server is running in Shared Services mode so the relevant settings doesn't apply...
    Thanks a lot!
    Kind Regards
    Andre

    You should still be able to set the "Inactive limit" in EAS or use Maxl e.g. alter system set session_idle_limit x minutes;
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • The start time for SAP service

    Experts:
    Sometimes I need to know the start time for SAP service at
    the NT service panel.
    However either the service panel or the event viewer does
    not give the service start time.
    Is there a file to check above info?
    Thanks!

    Hi Jenna,
    Windows Event Viewer will give you details on how long the service has been running since its startup.
    A simple mathematical subraction can give you when the service was started.
    Hope this is useful.
    Regards,
    Deepak Kori

  • How to improve the activation time for a standard DSO

    Hi all,
    I'm facing an issue related to the activation of a DSO. The SM37 log is as follows....
    12:03:16 Job started
    12:03:16 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
    12:03:20 Attivazione is running: Data target ZFIZIASA, from 93,627 to 93,627
    12:18:00 Overlapping check with archived data areas for InfoProvider ZFIZIASA
    12:18:00 Data to be activated successfully checked against archiving objects
    12:18:02 Status transition 2 / 2 to 7 / 7 completed successfully
    12:18:13 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218130
    12:18:19 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218190
    12:18:20 Parallel processes (for Attivazione); 000003
    12:18:20 Timeout for parallel process (for Attivazione): 000300
    12:18:20 Package size (for Attivazione): 020000
    12:18:20 Task handling (for Attivazione): Processi batch
    12:18:20 Server group (for Attivazione): Nessun gruppo di server config
    12:18:20 Activation started (process is running under user BWREMOTE)
    12:18:20 Not all data fields were updated in mode "overwrite"
    12:18:20 Process started
    12:18:20 Process completed
    12:18:20 Activation ended
    Please have a look into the bold 3rd & 4th line. I couldnt able to analyse where the issue is and what to do to minimize the time for activation.
    It is very challenging, please reply!
    Please help.
    Thanks in adv.
    Ajay

    Hi Kundan,
    Thanks for the response!
    Actually, I have two identical DSO, having all the char & KF same and feeding the data from same DS at the same time but the issue is...
    1) For 1st DSO, Activation log....
    01.07.2010 02:02:41 Job started
    01.07.2010 02:02:41 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
    01.07.2010 02:02:46 Attivazione is running: Data target ZFIZIASA, from 93,751 to 93,751
    01.07.2010 02:19:27 Overlapping check with archived data areas for InfoProvider ZFIZIASA
    01.07.2010 02:19:27 Data to be activated successfully checked against archiving objects
    01.07.2010 02:19:27 Status transition 2 / 2 to 7 / 7 completed successfully
    01.07.2010 02:19:28 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICC6UMXYT00Z2DYOQV8QL8CJ with ID 021
    01.07.2010 02:19:30 Parallel processes (for Attivazione); 000003
    01.07.2010 02:19:30 Timeout for parallel process (for Attivazione): 000600
    01.07.2010 02:19:30 Package size (for Attivazione): 020000
    01.07.2010 02:19:30 Task handling (for Attivazione): Processi batch
    01.07.2010 02:19:30 Server group (for Attivazione): Nessun gruppo di server config
    01.07.2010 02:19:30 Activation started (process is running under user BWREMOTE)
    01.07.2010 02:19:30 Not all data fields were updated in mode "overwrite"
    01.07.2010 02:19:30 Activation ended
    2) For 2nd DSO, the activation log is..
    01.07.2010 02:01:13 Job started
    01.07.2010 02:01:13 Step 001 started (program RSPROCESS, variant &0000000006947, user ID BWREMOTE)
    01.07.2010 02:01:35 Attivazione is running: Data target ZFIGL_02, from 93,749 to 93,749
    01.07.2010 02:01:43 Overlapping check with archived data areas for InfoProvider ZFIGL_02
    01.07.2010 02:01:43 Data to be activated successfully checked against archiving objects
    01.07.2010 02:01:53 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015300
    01.07.2010 02:01:54 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015400
    01.07.2010 02:01:56 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015600
    Now my client is asking to lower the activation time for 1st one as it is taking for 2nd one.
    I'm toatally blank now that what & how to do it!
    The volume of data ...
    ZFIZIASA
    Active table - Number of entries: 13.960.508
    Change Log Table - Number of entries: 13.976.530
    ZFIGL_02
    Active Table - Number of entries: 21.923.947
    Change Log table - Number of entries: 21.938.657
    Thanks,
    ajay
    Edited by: sap.ajaykumar on Jul 6, 2010 1:47 PM

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • When I edit a song in itunes (i.e change the year) on purchased songs, the next time I return to itunes, the information has reverted back to the original information. How can I change that?

    When I edit a song in itunes (i.e change the year) on purchased songs, the next time I return to itunes, the information has reverted back to the original information. How can I change that?
    When I purchase ITunes music, and it is a song from a Greatest Hits album, the Year of the song shows the year the CD was released and not the year the song was released (i.e. a song may be from 1986, but the Greatest Hits album was released in 1999, so my songs in ITunes show 1999).    So, I go into each of those songs and change it to the year that I want to be displayed. As long as I don't exit out of ITunes, it will show the year that I changed it to (i.e. the 1986 year in this case). But if I exit out of ITunes and then return to ITunes, the year reverts back to 1999. The same happens if I change the genre of a song from, say 'Pop' to 'Alternative', it will revert back the next time I log in.
    Oddly enough, as soon as I right-click on that song to change it back, the year/genre that I had entered returns.
    How can I make it so my changes are permanently displayed as I want them?  This is pretty annoying when I try to find a song on my Ipod under a certain genre, but it doesn't appear in that genre because the incorrect information gets synched to the Ipod.

    Make sure that these two options in Edit > Preferences > Store are turned off:
    Then exit iTunes and open it up again.  Your metadata entries should then be persistent - with these options checked iTunes will be comparing what you have with the information held in the iTunes Store, and will overwrite with the latter for Store purchases (and if you have iTunes Match).  If you have any iOS devices you should also turn off Show All Music under Settings > Music.

  • How can I change the hotkey assignments for options listed in the context-click (right-click) menu?

    How can I change the letter assignments designated to the options that appear in the right-click drop-down menu?
    I frequently save specific items and inspect elements in webpages, however currently the key assignment for 'View Page Info' is the letter ' i ', which inconveniently is located out of the reach of my left hand.
    Rather than forcing ambidextrous mouse usage to allow my right-hand to rest on the keyboard, if I could be pointed in the right direction for customizing these assignments I would greatly appreciate it. I have been able to disable some of the menu items I don't use with firebug but didn't see/didn't know how to go about customizing this option in about:config or deeper in the program files.
    Thanks ahead of time, I'm sure this will be a quick and hopefully easy file/preference name assignment I just need to add, I just couldn't find any forums that had already addressed the request.

    While that add-on is pretty useful and handy for customizing the keyboard shortcuts for items housed in the Menu Bar, it does not provide the resource to change the key combinations assigned to items in the context-click menu
    (the one that appears when you right-click a HTML element or image or such with specific actions pertaining to the item you clicked on - See image)
    https://support.cdn.mozilla.net/media/uploads/images/2014-12-14-13-13-50-85097a.png

  • When emailing from iPhoto, the recipients address comes up incorrect, even though it is correct in both my email accounts.  How do I edit it?  I have changed it, but the next time it appears it contains the same errors.

    When emailing from iphoto with a template, the recipients' address comes up incorrect (a couple of letters are wrong).  The addresses are correct in both my email accounts, including the one I am using for the iphoto email.  I have corrected the address prior to sending the email, but they come up with the same errors the next time I choose them in the iphoto 11 program.  How do I correct thes email addresses?  thank you

    In Mail Preferences/Accounts/each GMail account, set up the SMTP Outgoing Server for each account separately, going into SMTP name/edit/Advanced and specify the Username of each account.  The Outgoing servers must be two different servers, authenticated by the Username and Password of each.
    Otherwise, the GMail SMTP server will change the from address to that of the account where the SMTP server was setup.
    Ernie

  • Unable to Determine the Change Date and Time for records in infotype 2011

    Hi Everyone,
    We need to know on when the clock-in and clock-out records were interfaced to SAP in infotype 2011.
    The change date/time field in infotype 2011 is blank/not populated. Hence, we're unable to determine on when the clock-in records were updated in infotype 2011.
    It is not possible to get the audit logs for infotype 2011 as it is switched off.
    We found this table TEVEN and just the same thing, the field "change on" is blank.
    Kindly help us on how we can determine the change date and time for records in infotype 2011.

    Hi Prasad,
    Here's the scenario.
    On June 3, it was reported that staff's clock-in record on june 1, 7:00AM is missing in infotype 2011.
    However, when I checked infotype 2011, the record is there.
    So, they are now asking me on when this record was updated in infotype 2011 as they are thinking that there might be some delays in sending of the data to SAP.
    The created on and created at in table TEVEN shows the same, june 1, 7:00AM which seems to be not true as on june 3, it was reported to be missing.
    Can you help further on this?

  • How can I increase the transition time between songs on my IPOD?  I do not want a fade.

    How can I increase transition time between songs on my IPOD?  I do not want a fade.

    If Crossfade is OFF, the fadeout is actually part of the recording, so you won't be able to change how it fades.
    If you want to make the silence (gap) between songs longer, there is only one setting I know of that relates to the gap between songs, and it is in iTunes.
    Do a Get Info on a song in iTunes (File -> Get Info OR Cmd-I from keyboard) and go to the Options tab in the Info window.  There is a setting called Part of gapless album.  If that checkbox is checked, the songs are played with no gap.
    I don't know of any other setting in iTunes or the iPod that makes the gap between songs longer.

  • How can I get the elapse time for execution of a Query for a session

    Hi ,
    How can I get the elapse time for execution of a Query for a session?
    Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
    Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
    Thanks in advance.

    Hi
    You can use the dbms_utility.get_time tool (gives binary_integer type value).
    1/ Initialize you time and date of beginning :
    v_beginTime := dbms_utility.get_time ;
    2/ Run you procedure...
    3/ Get end-time with :
    v_endTime := dbms_utility.get_time ;
    4/ Thus, calculate elapsed time by difference :
    v_elapsTime := v_endTime - v_beginTime ;
    This will give you time elapsed in of 100th of seconds...
    Then you can format you result to give correct print time.
    Hope it will help you.
    AL

  • New iphone. someone else put in their username and password. time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ?

    new iphone. (someone else put in their username and password. so i had lots of apps that i had to eliminate but do NOT wish to compromise the contact list) time for me to update the iphone. downloaded itunes onto pc. plugged in iphone and waiting for prompt to show phone. pc thinks it is the camera. how do i get itunes/pc to recognize iphone ? then, how do i backup contacts and proceed before updating iphone?

    This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes or iPhone forums.
    Regards.

Maybe you are looking for