The start time for SAP service

Experts:
Sometimes I need to know the start time for SAP service at
the NT service panel.
However either the service panel or the event viewer does
not give the service start time.
Is there a file to check above info?
Thanks!

Hi Jenna,
Windows Event Viewer will give you details on how long the service has been running since its startup.
A simple mathematical subraction can give you when the service was started.
Hope this is useful.
Regards,
Deepak Kori

Similar Messages

Does anyone know how to set the starting time for an audio book?

I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.

UCCX 5.0(2)SR02 is the version
I attached a screenshot of what I am trying to use but I am not sure what to put as the value? I tried using "now" and "null" but no success.

How to edit the starting time for clips in properties?

Hello there ,
I’m testing the CS5 Audition right now and find it great except for one thing:
In the properties for each clip there is a starting time. But it just can’t be edited!
I can change the starting time of the whole session – yes.
But not the ones of the individual clips. Only by moving them around and that is not very precise.
Is there a way to edit this starting times for the clips by typing in numbers?
Thank you :).

AAUser777 wrote:
But wasn't that easier before?
Do I have to save any time I make a change?
As far as I'm aware, you've always had to save changes to metadata to make them permanent!
One more please:
Can't I group Clips and move them together anymore?
One more thing please:
Many people say that CS5 is worse than 3.
Why are all those people bothered?
No you can't group clips in CS5.5. And the reason that a lot of people are bothered is - because you can't group clips in CS5.5.
There are a few other reasons cited too, but I think that the lack of clip grouping may be at the top of the list, judging from the number of comments about it. If you look around the forum you will find a lot of discussion about this.

Setting the starting time for multiple podcasts

How do I set starting time for a group of podcasts at the 30 second mark. Mostly the beginning are all repetitious which I heard before.
I know, I can do that individually by going to info and set the slider. But how can I do this collectively?

I don't think you can do it on multiple files at once. Probably the easiest thing to do is to select the first one and change the setting. Before you close out of that window, copy your start time from the field and then click next at the bottom of the window and paste into that one and so on until you're done. It's not pretty, but the quickest way I know of to do it. Otherwise, you might Google Doug's Scripts and see if that site has a script that might do this.

Why does GMT show in the starting times for sports

On my Scoreboard game starting times used to be shown as PDT or PST. Now it shows GMT. I know that Pacific time is 3 hours earlier than my area's Eastern time. How much difference is there in GMT and Eastern time and why the change?

hello, please contact the website where you're having this issue - it isn't something that is controlled by your browser.
for GMT conversion relative to your location see www.wolframalpha.com/input/?i=current+time+in+timezone+GMT

Can we some how display the start time for meetings on the monthly calendar

I would like to be able to start times to apointments on the monthly calendar view and also be able to print it. Can this be done with i Cal? If not is there an add-in that will allow it?

iCal Preferences>General and check 'Show event times in month view'.

Can I edit the start time for all the podcasts from a single subscription downloaded to my itunes? i.e. want to creat a playlist of all the podcasts I have from a particular show...

I want to creat a playlist of all the podcasts I have from a particular show, want to edit out the first minute on all to skip the intro. Do not want to edit over 200 podcast manually. Is there a solution?

View menu -> Show Status Bar
Then the total play time for any group of tracks you select in the Songs area, for any selected album or for any selected playlist will show at the bottom of the iTunes window as in previous versions.
The ability to open playlists in separate windows was for some unfathomable reason removed in iTunes 11. Whether it will ever come back none of us here can say, but you can express your need for that feature via Apple's feedback page:
http://www.apple.com/feedback/itunesapp.html
Regards.

Modified start time for songs overlaps on to other songs

If I change the start time of a song in itunes, and I listen to the song on suffle with an ipod touch, other songs that I shuffle start with that same modified start time as the original song.
That is,
Say I have a song, "Great Song" by "Cool dudes"
and another song "Terrible Song" by "Get this off your iPod"
And I set the start time for Great Song to be 0m 42s. If I have my iPod touch on shuffle and this song is picked, it starts at 0:42. If I change the song before this song finishes and Terrible Song is picked, it will also start at 0m 42s, despite me never changing its start time.
How can I fix this?

Hi Alonzo,
In the UK, you currently should be in GMT with Daylight Saving on. You'll need to correct the time on the phone (by moving it back one hour in Settings > Time & date > Time) when you have done this.
After this you'll need go into iSync, select your phone and from the Devices menu select Reset Device to re-populate the phone with the correct data.
John M

"Start" time for songs

Hi everyone, within iTunes, you're given the ability to actually set the start time for a song, in my case, this would allow me to cut out the intro... My question is this, when I do set the time for a song, it works fine within iTunes, but it does not carry over to my iPod... is there a way of setting this?

I believe it should work on iPods. It seems to work just fine on my 5th generation iPod. Perhaps time to perform a Restore on the iPod to make sure it is in a good state of repair and resync your library?
Alternatively you can create a copy of the track from the original that has the start time specified. This will make a copy trimmed down to only the parts between the start/stop times. Then sync that version to the iPod.
Patrick

Does anyone besides me find it odd that calendar.app assigns a start time for an all day event?

Does anyone besides me find it odd that calendar.app assigns a start time for an all day event?

Hi SharpBud,
The date for all day event stored in SQL in GMT time, the start time for an all day event returns the start time in GMT time, which is not the current time most likely.
This is a confirmed issue, as a workaround, I would suggest you to use a calculate column for the event for the column, using the following format:
IF(TEXT(([End Time]-[Start Time])-TRUNC(([End Time]-[Start Time]),0),"0.000000000")="0.999305556",IF([Start Time]=ROUND([Start Time],0),[Start Time],DATE(YEAR([Start Time]),MONTH([Start
Time]),DAY([Start Time])+1)),[Start Time])
Thanks,
Qiao Wei
TechNet Community Support

What is the url for sap services?

hi
i need url for sap services to search in market place for oss notes

Hi , pls chk this.
OSS notes describe bugs/issues/problems in SAP software, provide the technical details and correction instructions.
Notes also sometimes cover 'features' (ie things that are not bugs) that cause ambiguous application behavior. Additionally, specific information relevant to releases, SAP strategy (eg when is support to a particular version going to end) regarding its products and so on is also provided via notes.
You have a search portal for SAP Notes which will tell you more about it.
You would a S-user id to logon to the OSS Notes. The S-user id is basically based on the installation number of your SAP system. You can get the user id from your BASIS. Once you get this then logon to this link:
http://service.sap.com/notes.
Check this:Re: oss
Also check this document. It has the step by step procedures with screenshots to apply a Note.
http://www.sappoint.com/basis/snote.pdf
first you should have oss id then you can see oss note here
https://service.sap.com/notes
take a look thread
oss
oss note is a document provided by SAP that described particular issue, usually with symptom, cause(the reason), solution provided, and some other info (correction instruction and code).
oss note has version, date issued, and categorized to application area (e.g BW, CRM, etc).
in practice, when error occured, normally there will be error number and message, that can be used to search oss note which in return may provide possible solutioon. some problem will have short dump, and in the dump, there is suggestion to search oss note with using keywords specified(program name, module name, etc.)
cheers,

Hide the start time and end time in ESS portal

Experts,
We have a requirement to hide the Start time and End time on the header section of the travel request / expense sheet in the ESS portal. I have searched through the configuration and found several place to hide the start time and end time of segment yet these have no impact on the porta start and end time fields.
Please Advise.
Best Regards,
Martin Weakley

Hi Martin,
you can achieve this with administrative personalisation. In portal content navigate to the role where you deltalinked your iView, click "preview". When a new Window for the preview is opened, notice the URL contains "&sap-config-mode=true". Now right click on the fields you want to hide and choose "enter configuration" (or the like, wording is not exact) from the context menue. The WD-UI-Element tree opens where you can directly hide/customize properties of the WD. When clicking save+exist you can also transport the alterations you did.
maybe this helps or gives you a helpful alternative to the already stated measures in this thread
regards, Lukas

SCOM Alert Connector - not updating the start time and finish time

When I am monitoring the status of connectors in service manager console, I found that for SCOM Alert Connector the Start Time and Finish Time are not updating. Previously it was updated daily. As of now, service manager is working fine but would like
to check will it create any issues? Even I have cliked on Synchronize Now, but there is no update. Please guide me on this to trouble shoot further? Thanks.

Hi,
Based on my research, the Start Time and Finish Time values are not updated when an alert connector is synchronized. These values are only updated when alert data is transferred between Operations Manager 2007 and Service
Manager.
More details, please refer to the link below:
http://technet.microsoft.com/en-us/library/hh495609.aspx
In addition, here is a blog about troubleshooting for SCSM and SCOM alert connector:
http://blogs.technet.com/b/servicemanager/archive/2010/04/14/troubleshooting-tips-for-your-scsm-scom-alert-connector.aspx
Regards,
Yan Li
Regards, Yan Li

How to improve the activation time for a standard DSO

Hi all,
I'm facing an issue related to the activation of a DSO. The SM37 log is as follows....
12:03:16 Job started
12:03:16 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
12:03:20 Attivazione is running: Data target ZFIZIASA, from 93,627 to 93,627
12:18:00 Overlapping check with archived data areas for InfoProvider ZFIZIASA
12:18:00 Data to be activated successfully checked against archiving objects
12:18:02 Status transition 2 / 2 to 7 / 7 completed successfully
12:18:13 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218130
12:18:19 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218190
12:18:20 Parallel processes (for Attivazione); 000003
12:18:20 Timeout for parallel process (for Attivazione): 000300
12:18:20 Package size (for Attivazione): 020000
12:18:20 Task handling (for Attivazione): Processi batch
12:18:20 Server group (for Attivazione): Nessun gruppo di server config
12:18:20 Activation started (process is running under user BWREMOTE)
12:18:20 Not all data fields were updated in mode "overwrite"
12:18:20 Process started
12:18:20 Process completed
12:18:20 Activation ended
Please have a look into the bold 3rd & 4th line. I couldnt able to analyse where the issue is and what to do to minimize the time for activation.
It is very challenging, please reply!
Please help.
Thanks in adv.
Ajay

Hi Kundan,
Thanks for the response!
Actually, I have two identical DSO, having all the char & KF same and feeding the data from same DS at the same time but the issue is...
1) For 1st DSO, Activation log....
01.07.2010 02:02:41 Job started
01.07.2010 02:02:41 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
01.07.2010 02:02:46 Attivazione is running: Data target ZFIZIASA, from 93,751 to 93,751
01.07.2010 02:19:27 Overlapping check with archived data areas for InfoProvider ZFIZIASA
01.07.2010 02:19:27 Data to be activated successfully checked against archiving objects
01.07.2010 02:19:27 Status transition 2 / 2 to 7 / 7 completed successfully
01.07.2010 02:19:28 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICC6UMXYT00Z2DYOQV8QL8CJ with ID 021
01.07.2010 02:19:30 Parallel processes (for Attivazione); 000003
01.07.2010 02:19:30 Timeout for parallel process (for Attivazione): 000600
01.07.2010 02:19:30 Package size (for Attivazione): 020000
01.07.2010 02:19:30 Task handling (for Attivazione): Processi batch
01.07.2010 02:19:30 Server group (for Attivazione): Nessun gruppo di server config
01.07.2010 02:19:30 Activation started (process is running under user BWREMOTE)
01.07.2010 02:19:30 Not all data fields were updated in mode "overwrite"
01.07.2010 02:19:30 Activation ended
2) For 2nd DSO, the activation log is..
01.07.2010 02:01:13 Job started
01.07.2010 02:01:13 Step 001 started (program RSPROCESS, variant &0000000006947, user ID BWREMOTE)
01.07.2010 02:01:35 Attivazione is running: Data target ZFIGL_02, from 93,749 to 93,749
01.07.2010 02:01:43 Overlapping check with archived data areas for InfoProvider ZFIGL_02
01.07.2010 02:01:43 Data to be activated successfully checked against archiving objects
01.07.2010 02:01:53 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015300
01.07.2010 02:01:54 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015400
01.07.2010 02:01:56 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015600
Now my client is asking to lower the activation time for 1st one as it is taking for 2nd one.
I'm toatally blank now that what & how to do it!
The volume of data ...
ZFIZIASA
Active table - Number of entries: 13.960.508
Change Log Table - Number of entries: 13.976.530
ZFIGL_02
Active Table - Number of entries: 21.923.947
Change Log table - Number of entries: 21.938.657
Thanks,
ajay
Edited by: sap.ajaykumar on Jul 6, 2010 1:47 PM

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Can I use my creative cloud account at the same time for my iMac and my MacBook?

Thank you Sheena!!
Guy
Op 2-jan.-2015, om 12:16 heeft Sheena Kaul <[email protected]> het volgende geschreven:
Can I use my creative cloud account at the same time for my iMac and my MacBook?
created by Sheena Kaul <https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View the full discussion <https://forums.adobe.com/message/7059158#7059158>
Hi Guy Heyligen,
Absolutely. You can use the creative cloud account on two machines.
You may also refer to the link below:
Creative Cloud Help | Creative Cloud / Common Questions <http://helpx.adobe.com/creative-cloud/faq.html>
Regards,
Sheena
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7059158#7059158 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7059158#7059158
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Adobe Creative Cloud by email <mailto:[email protected].com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=46 70>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.

The start time for SAP service

Similar Messages

Maybe you are looking for