How to change the values in an LOV based on values selected in another LOV

Hi,
I have a requirement in ADF where there are two LOVs. Based on the values that I select in the 1st LOV, the values in the second LOV should change dynamically.
Also, the 1st LOV accepts 3 values, for every value I select, a different query is executed to populate the 2nd LOV.
I have a rough thought that I can use 3 different read only view objects containing these 3 queries. And based on the value I select in the 1st LOV I can execute the corresponding View object from the backing bean. But my doubt is how to link the results of that query that is executed to populate the 2nd LOV.
Thanks in advance.
Edited by: 886591 on Sep 21, 2011 4:48 AM

Hi Brisk,
Thanks for your reply.
The link that you have provided explains how to disable and enable the other LOVs based on a parent LOV. But in my case there are two Select One Choice fields i.e. the dropdowns (sorry that I addressed it as LOV in my previous post which might be confusing). There are 3 static values in the parent dropdown where each of them are associated with a different query. for e.g if the three values in the drop down are A, B and C; if i select A, then query associated to A should be executed ; if i select B, then query associated to B should be executed and if I select C, query associated to C should be executed. Then the output attribute of that query should be populated in the child dropdown.
Please let me know about the solutions to this.
Thanks,
Kavitha

Similar Messages

How to change the column header name dynamically based on sysdate

Post Author: senthi_gokul
CA Forum: WebIntelligence Reporting
Dear All,
i have designed some reports. i would like to change the column header dynamically based on sysdate. up to 24 months. can u help me, which add month function using the universe. i dont know if-then-else function is having the universe tool or not?

Post Author: prasingh
CA Forum: WebIntelligence Reporting
Are you saying you are not able to create an object by value (select: statement) as sysdate and put it onto the headers of your report? You can use the add_months() function on the object to add the numbers of months you wish.
Please let me knnow for more.. You can get in touch with me on [email protected] for quick reply.

How to change the label of a link based on a condition in a report.

Hi all,
I have a report, in which i created a link.
i want the the label of the link to change based on a column value.
for eg. i created report based on emp table which has a link on empno .
if the deptno of the employee is 10 i want the link to be displayed as "employee of deptno 10".
if the deptno of employee is 20 or 30 i want the link to be displayed as "others"
Thanks in advance.

One way I've found to do this is to put the condition part into the select statement. Use a decode to determine which link text you want to display, e.g.,
select '<a href="yourlinkhere?employee=' || empno || '">' || decode(deptno,10,'employee of deptno 10','others') || '</a>' emplink from emp;

How to change the insert allowed false dynamically based on some condition

Hi,
I have two data blcoks B1 and B2.
B1 is heade and B2 is detail.
B1 contain one filed PO number based on that user press the button.
Based on PO we get the some fileds in B2 from cursor.
In B2 filed contain total 5 fields. 4 fields come from cursor button. remaining one field user will enter.
My requirement is afte the getting the records from cursor. I need to not allowed to create new records.
Please do the needful.

902434 wrote:
Hi,
I have two data blcoks B1 and B2.
B1 is heade and B2 is detail.
B1 contain one filed PO number based on that user press the button.
Based on PO we get the some fileds in B2 from cursor.
In B2 filed contain total 5 fields. 4 fields come from cursor button. remaining one field user will enter.
My requirement is afte the getting the records from cursor. I need to not allowed to create new records.
Please do the needful.As per i understand you want on block b2 insert allowed false.
Try this
If your_condition then
SET_BLOCK_PROPERTY('block_name', INSERT_ALLOWED, PROPERTY_FALSE);
else
SET_BLOCK_PROPERTY('block_name', INSERT_ALLOWED, PROPERTY_TRUE);
end if;Hopes this helps..

How to dynamically display the data from a table base on row selection of another table in ADF

Hi ,
I have a requirement in ADF. I need to change the data of a table based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                     For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
My method is following
    public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
"Definition DepartmentId of type Variable is not found in EmployeesView1."
I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
Thanks
Nilesh

Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
However, if both tables are on the same page; using your hack about;
On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
I would bind table two to a RichTable component:
RichTable t2;
public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
               refreshTable2(pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
private void refreshTable2(Number pallet){
RichTable x=getT2();
CollectionModel cm=(CollectionModel)x.getValue();
JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
ViewObject vo =dciter.getViewObject();
ViewCriteriaManager vcm=vo.getViewCriteriaManager();
ViewCriteria vc=vcm.getViewCriteria("listById");
vo.applyViewCriteria(vc);
vo.setNamedWhereClauseParam("DepartmentId",pallet);
vo.executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

How to change the HTML/XML test data to test my_abap_proxy in SE80?

Hello,
I am trying to test my_abap_proxy in SE80 by usng a HTML/XML file of my desk top, the test data is as below
<LoadingDate>20110422</LoadingDate>
<DocumentDate>20110422</DocumentDate>
<SDDocumentCategory>G</SDDocumentCategory>
so on.......
Now, i want to change the Loading date in this test data, so, i tried after Loading file in Test Service Provider screen of my_abap_proxy of SE80, but i could not make change ANY data in this test data, pls. let me know how to change the data?
Thank you

Hello ABAP_SAP_ABAP ,
Youneed to select the option "generate template data " and then on the displaying template there you will see the option for editing in the top left corner toolbar.
Then after editing you can do a XMl syntax check and test your proxy.
Hope this helps.
Thanks,
Greetson

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

How to change the frequency of pulse train on the fly using an array of values?

Hi all!
First I want to thank U for the great job you are doing for this forum.
Iam still busy trying to control a stepper motor, by sending pulses from my E-series 6024 to a compumotor s6- stepper Driver. I've managed to get it working. I desperately need to control the motor using the values from an array. I believe we can use two approaches for that:
1st - I can get an array of the "numbers of pulses". Each element must run for 10 milliseconds. Using that we can calculate the array of frequencies to send the number of pulses within 10 milliseconds for each specific element. Could we use the arrays of "number of pulses" and frequencies in a "finite pulse train " and up
date with each element every 10 millisecond?
2nd - Or Could we use of the frequency array in a "continuous pulse train vi" and update it every 10 milliseconds?
Please note that I must use the values as they are.
Can someone please built a good example for me? Your help will be appreciated.
Regards
Chris
Attachments:
number_of_steps.txt ‏17 KB
frequency.txt ‏15 KB

Tiano,
I will try to better explain the paragraph on LabVIEW. The original paragraph reads ...
"While in a loop for continuous pulse train generation, make two calls to Counter Set Attribute.vi to set the values for "pulse spec 1" (constant 14) and "pulse spec 2" (constant 15). Following these calls you would make a call to Counter Control.vi with the control code set to "switch cycle" (constant 7). The attached LabVIEW programs demonstrate this flow."
You can make two calls to Counter Set Attribute or you can make a call to Set Pulse Specs which, if you open this VI, you will see that it is just making two calls to Counter Set Attribute. What you are doing with the Counter Set Attribute VIs is setting two registers called "pulse s
pec 1" and "pulse spec 2". These two registers are used to configure the frequency and duty cycle of your output frequency.
The example program which is attached to this Knowledge Base demonstrates how to change the frequency of a continuous generation on the fly. Why continuous? Because changing the frequency of a finite train would be easy. When the train completes it's finite generation you would just change the frequency and run a finite train again. You would not care about the time delay due to reconfiguration of the counter.
If you would like to change the frequency of the pulse train using a knob, this functionality will have to be added in the while loop. The while loop will be continuously checking for the new value of the knob and using the knob value to set the pulse specs.
LabVIEW is a language, and as with learning all new languages (spoken or programatic) there is a lot of learning to be accomplished. The great thing is that LabVIEW is much easier than mo
st languages and the learning curve should be much smaller. Don't fret, you'll be an expert before you know it. Especially since you're tackling a challenging first project.
Regards,
Justin Britten

How to change the Credential domain Value in XML gateway?

How to change the Credential domain Value in XML gateway?
configured the XML Gateway trading partner . It is generating the header as given below. but need to change the Credential domain to DUNS.
<Header>
<From>
<Credential domain="olgridap1.lan">
<Identity>53369415-cxml</Identity>
</Credential>
</From>
Desired XML header
<Header>
<From>
<Credential domain="DUNS">
<Identity>53369415-cxml</Identity>
</Credential>
</From>

You might want to check WLP 10.3 & deployment plan & log4j.xml for a similar topic.

How to change the Unitprice value from 2 decimals to 3 decimals in script

Hi Gurus,
how to change the Unitprice value from two decimals to three decimals for each item level for PO in script.
Please provide some possible solutions.
Thanks,
V.V.

Hi,
Check the options available like
&VAR(.2)& this will print 2 decimals
&VAR(.3)& this will print 3 decimals
need to change the value for how many decimals you need
Thanks & Regards
Sarves Sombhatla

How to change the default currency in CJ32 and CJ33

Dear all,
As required by the user, I want to know how to change the default currency from controlling area currency to object currency in TCODE CJ32 and CJ33. Currently, the controlling area currency will be defaulted in the field "Views in".
Could any one help me? Points will be awarded.
Thank you.
Christina.
Edited by: Virendra Pal on May 5, 2010 8:34 AM

Hi Christiana ,
Once you are in tcode CJ30 / CJ32 , Enter either Project definition or WBS element and this shall take you to the Budget screen and once you are here you can find a drop down with two options .One is Controlling are currency and the other one is Object currency.
Since the Currency is set to Object currency in OPS9, System shall allow the budget values in Object currency and if the user wants to see the same values in Controlling are currency ,then the user needs to view the values in Controlling are currency using the drop down .
Regards
Judy

How to change the default port of webdispatcher

Hello Everyone,
We wish to know to how to change the default port of SAP webpatcher port from 81$$ to 80.
Appreciate your response.
Thanks,
Vadi

Hello Vadi
you have to change the PORT value in your profile parameter from 81$$ to 80
icm/server_port_0 = PROT=HTTP,PORT=81$$ to
icm/server_port_0 = PROT=HTTP,PORT=80
Also, in SMICM, then change http service port and activate it and above parameter will require SAP restart
$$ is used generally to accomodate multiple port services running in SMICM and so as to avoid the parameter setting according to instance number of any system.
thanks
Bhudev

How to change the default language of form9i?

How to change the default language of form9i? For example, change the language from Spanish to English.
Regards!
Gerald

Hi,
set the NLS_LANG parameter and make sure the language supplement classes got installed when installing the deesigntime or server. If you need to change the language for runtime, set the value in the default.env file - assuming its a web based appication
Frank

How to change the default save encoding of the dvm files when create dvm???

When I creating a DVM(domain-value mapping) in Chinese on the ESB control and confirm it, then restarted the SOA service, the DVM that I created in Chinese disappeared from ESB control. All the maps(both English and Chinese ) are in DVM Repository.
After I updated the encoding from ‘UTF-8’ to ‘GB2312’ in the three files below, and restarted the SOA service, the DVM in Chinese appeared on ESB control.
But when I adding the second row in Chinese and save it, then restart the SOA service, the DVM in Chinese disappeared from ESB Control once again. Because the encoding in the three files below is updated from ‘GB2312’ to ‘UTF-8’ .
Files:
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\metadata\files\dvm\Chinese.xml.def.xml
C:\product\10.1.3.1\OracleAS_1\integration\esb\oraesb\artifacts\store\content\files\dvm\Chinese.xml_1.0
How to change the default save encoding of the dvm files when create dvm in ESB control ???

I have the same problem. When I updated to Mavericks now the bookmarks bar font is huge. I liked it the way it was before. I liked the smaller font. Also wish I could change the color of the sidebar and font/folders too.
I tried to see in preferences if there was anyway to change it, but I don't see anything there.

How to change the default element tag using dbms_xmlgen

here is my code that generate output for purchase order data. I followed the syntax shown in xml db developer guide.
I am getting the results but element tags are CAPS letters( As the coloumn names in the type defenitions are stored in CAPS in Oracle). but I need to show in small letters as per my requirement.
can anyone help me how to change the default tag names for elements.
==================================HERE IS THE CODE==================
DECLARE
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
BEGIN
qryCtx := DBMS_XMLGEN.newContext
('SELECT PODL_H_T
( CLOSEDDATETIME ,
COMPANY ,
CAST(MULTISET
(SELECT LINENUMBER ,
COMPANY ,
PURCHASEORDERID ,
ITEM ,
QUANTITYUM ,
TOTALQUANTITY
FROM cpo_wms_podl_LINES
WHERE PURCHASEORDERID = PH.PURCHASEORDERID) as PurchaseOrderDetailList
FROM cpo_wms_podl_HEADERS PH ');
-- now get the result
DBMS_XMLGEN.setRowSetTag(qryCtx, 'Receipts' );
DBMS_XMLGEN.setRowTag(qryCtx, 'PurchaseOrder' );
result := DBMS_XMLGEN.getXML(qryCtx);
INSERT INTO temp_clob_tab VALUES (result);
DBMS_XMLGEN.closeContext(qryCtx);
END;
-- select * from temp_clob_tab
===========create type script=====================
cpo_wms_podl_HEADERS
CREATE or replace TYPE PurchaseOrderDetail AS OBJECT(
LINENUMBER VARCHAR2(400 BYTE),
COMPANY VARCHAR2(400 BYTE),
PURCHASEORDERID VARCHAR2(400 BYTE),
ITEM VARCHAR2(400 BYTE),
QUANTITYUM VARCHAR2(400 BYTE),
TOTALQUANTITY NUMBER
create type PurchaseOrderDetailList as table of PurchaseOrderDetail
create table temp_clob_tab(result CLOB)
create type podl_HEADERS_list_t as table of podl_HEADERS_t
CREATE or replace TYPE PODL_H_T AS OBJECT
CLOSEDDATETIME DATE,
COMPANY VARCHAR2(400 BYTE),
CREATEDDATETIME DATE,
PURCHASEORDERID VARCHAR2(400 BYTE),
SHIP_TO VARCHAR2(400 BYTE),
linelist PurchaseOrderDetailList
)

but I need to show in small letters as per my requirement.add alias column names in double quotes as in
SQL> select dbms_xmlgen.getxmltype('select dname "DeptName", loc "Location" from dept') dept_xml from dual
DEPT_XML
<ROWSET>
<ROW>
    <DeptName>ACCOUNTING</DeptName>
    <Location>NEW YORK</Location>
</ROW>
<ROW>
    <DeptName>RESEARCH</DeptName>
    <Location>DALLAS</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>CHICAGO</Location>
</ROW>
<ROW>
    <DeptName>OPERATIONS</DeptName>
    <Location>BOSTON</Location>
</ROW>
<ROW>
    <DeptName>SALES</DeptName>
    <Location>MUNICH</Location>
</ROW>
</ROWSET>
1 row selected.

How to change the 'Default operating mode' of a mapping on the repository and not from the client

Hi everybody,
I am using OWB 11.2.0.3 and under the mapping's configuration property, I have the necessity to change the Run time parameter "Default operating mode" to SET_BASED in almost all my mappings.
Because I have 745 mappings in which the Default operating mode is different from SET_BASED, instead to open 745 times the 'Configure' and update manually the value, is there a way to update safely these values (with an oracle predefined script) directly on the repository ?
I know that exists a view called CMPSTRINGPROPERTYVALUE_V based on a table called CMPSCOPrpClasses, but changing this table it's very complicated for me because contains only keys and then I don't know in which way is connected with all the other structures....
If somebody knows a method more efficient to do these updates on the repository and not from OWB client I will appreciated it!
Thanks in advance
Alessandro

Urgent... help!!! Thanks
in short, my server log says transaction access mode is "read only", so my calling home.create() always triggers a transaction rollback. How to change the access mode to "read write"?
Is possible to work out through one of the descriptor files? Or ini settings of the underlying pointbase database? Or any other way around?

How to change the values in an LOV based on values selected in another LOV

Similar Messages

Maybe you are looking for