How to change the width of the database-scalar data type

I have a new problem. I have a parameter F_Organization in my report(version 6i) of type Database-scalar. now that the width is fixed in property pallete. Is there any way to change the width of this parameter,if so how. will some one let me know

I did the same, opened the data model typed some dummy character and then deleted them, if u give the alias for the source it does not change the width, instead if u give the original name as the source it changes the width. I do not know why is this happening?
Message was edited by:
user552442

Similar Messages

How to change the default IDOC basic type from CREMAS05 to CREMAS04.

Hi All,
How to change the default IDOC basic type from CREMAS05 to CREMAS04 when sending Vendor Master Data.
When I generate partner profile, the system will add the latest version of IDOC type which is CREMAS05 to the Outbound message. In my project, I'm asked to use CREMAS04.
I want to use BD14 to send master data directly, but the program will generate IDOC using CREMAS05. Is there a way that I can change it to CREMAS04? And also for using Change Pointers, I want to use the report RBDMIDOC, but i have the same problem.
Thanks
Sai Krishna

execute WE20 and edit the outbound parameters
here is a pretty good example: http://documentation.softwareag.com/webmethods/sapr3_gateway/sap231/pages/sapdist.htm
Edited by: Jürgen L. on Sep 7, 2011 9:49 PM

Is it possible to change the Database default date format 'dd/mm/yy'

I'm inserting a date with the format 'dd-mon-yy' in a column, it gives the error:- " a non-numeric character was found where a numeric was expected ". I also tried the TO_DATE function but not successful.
I want to change the Database default Date format 'dd/mm/yy' to 'dd-mon-yy'. Is it possible?
version is (Oracle Server 7.3.2.0). I checked it on version ( Oracle Server 7.3.4.0) with format of 'dd-mon-yy'.
May I keep the both formats at a time?
Thanks for solution(s),
Tariq.

you can try with:
ALTER SESSION
SET NLS_DATE_FORMAT = 'dd-mon-yy';

How to change the database in Crystal reports

To give an overview there is one project going on where the oracle database is getting migrated from 10g to 11g.
All the details of database like IP, port etc are changing as part of this.
I can see the driver name configured as crdb_ado (Custom driver).
We have an test environment for 11g against which we have to point all the reports and test it.
Could you please let me know the below queries
Where and how to change the IP details in the crystal reports to point to new test and prod databases.
Overview on this crdb_ado driver
Basically the database is getting changed and we want the reports to point and run from the new database.
Thanks

Hi Vissu,
Thanks for your reply.
We need to change the database from the reports which are already running from central management console.
I can see a custom driver crdb_ado is being used and it connects to a database.
Could you please let me know where the database configuration is done.
Ideally we need to add one more database to a config file which i am not able to find.
I guess it should be similar to tnsnames.ora file in oracle where the different databases are stored.
From the above image I would like to know where the server details (NECTAR_Prod) would be configured.
Thanks in advance

How to change the database in a business area

Hello All,
I am trying to figure out a way to change the database that a business area connects to. When I created the business area I selected to look at tables from the default database. Now I need to change that setting to connect to a different database. The tables are exactly the same on both databases. I just need to change the database that the business area looks at.
Is there a simple way of accomplishing this? I want to avoid having to recreate the business area.
Thank you very much in advanced for your help with this matter.
Del Benavides.

Hi,
Select all your folders in Disco Administrator,ALT+ENTER to go to properties, then change the database from the default database to the remote database.
Hope that helps,
Rod West

Sysgen : How to read the input port data type, width and rate dynamically in a masked subsystem ?

Hello everybody,
     I am designing a general purpose block in system generator. I pass the user parameters to the block through masking it. Some user parameters can change the block configuration. The input port data type, width and rate can also affect the block configuration.
     The problem is that these values (input port data type, width and rate) are subject to change. So I should read them dynamically, then change the block configuration through programming the "Initialization Commands" field. But unfortunately there is no straight way to read the input port information.
     There are some methods in for example the "Black Box". these are:
input_width = this_block.port('din').width;
input_rate = this_block.port('din').rate;
But these methods are not applicable to a masked subsystem.
I have tried other ways also. You can find them below. None of them worked.
Does anybody know how can I solve this problem?
Other ways I tried:
1)
design_name([],[],[],'compile')
q=get_param(gcb,'PortHandles');
get_param(q.Inport,'CompiledPortDataType')
get_param(q.Inport,'CompiledPortWidth')
get_param(q.Inport,'CompiledPortDimensions')
design_name([],[],[],'term')
2)
ssGetInputPortDataType
3)
ts = Simulink.Block.getSampleTimes([gcb '/Input'])

Today we rely on Simulink to perform parameterization of your designs in two ways:
Parameterizable Subsystems and Blocks : Parameters themselves can be MATLAB expressions that need to be evaluated for which we need the MATLAB interpreter
The very useful Rate and Type propagation or Simulink compilation that allows us to specify types & rates in one location that gets systematically propagated to all.
To truly make the HDL Netlist that is generated from SysGen parameterizable, we would have to implement some of this capability in the HDL netlist itself by:
Using Generics(VHDL) or Parameters(Verilog) - We would have to capture the bit width(type) propagation through levels of hierarchies and finally parameterize the IP itself based on this value
Since IP itself does not have this capability through generics, we would have to package a separate tcl script that updates the IP parameterization appropriately in response to top level parameters(or GUI parameters)
Interpreting MATLAB expressions and translating them into VHDL/Verilog expressions (alternatively tcl expressions of IP). In simulink, mask parameters can be passed from one level to the next. Also parameterization of a block can be composed of Matlab expressions using variables from ancestor masks & the MATLAB interpreter – so we will need to somehow capture that as well.

How to change the schedule line date in SO with reference to value contract

Hi SD Guru's,
I need to change the schedule line date in the sales order with reference to the value contract by using some algorithm that i will write. The problem that i can't find the suitable place to add the algorithm. I can't add it to the Copy control because there is no schedule lines in value contract and copy control for schedule lines does no exist.
I can not add to user exit MV45AFZZ , because order that was created with reference to the value contract, does not go through this user exit.
Do you have some ideas where i can add it?
Thanks and Regards
Viky
Edited by: Viky Sloutsky on Oct 20, 2010 12:43 PM

Hello Viky
How about using program MV45AFZB- USEREXIT_CHECK_VBEP or USEREXIT_MOVE_FIELD_TO_VBEPKOM
or program FV45EFZ1- USEREXIT_CHANGE_SALES_ORDER
Does the program go through these exits when an order is created with ref to a value contract??
Also I am wondering why you need to change a Schedule line determined by Availability check and/or delivery scheduling?

How to change the "content created" date/time in FCPX?

Since I've had problems importing my whole iMovie event library into FCPX I decided to run some tests with importing individual files (part of iMovie events and originally imported from camera into iMovie). Some of them for some reason got the wrong "content created" date/time in them while in iMovie they have the right date/time set. Does anybody have an idea on how to change the "content created" timestamp?

I had a bunch of DV files that imported stamped with the file modification date and time. I did not find a way to change it in FCPX. With FCPX not running, I used A Better Finder Attributes to modify the creation and modification dates of the files in the event folder. FCPX reconnected to them but the event still showed the old range of dates so I created a new event and moved the clips to it. Maybe ther is a beter way but that is how I did it.

How to change the IDOC segment data

How to change the segment data for all IDOCs at one shot J.
For exmple E1EDK02-QUALF - 004
                   E1EDK02-RGID - 100000008 (Inquiry No)
               to
       E1EDK02-QUALF - 004
                   E1EDK02-RGID - 200000005 (Quotation)
Any hints, tips.Appreciate your help and more rewards.
Regards,
Cris

Hi,
You can change the IDOC values using the transaction WE09
Give the IDOC number..
Press F8..
Expand the tree..
Double click on the segment..
Then in the menu..DATA RECORD -> DISPLAY/CHANGE..
It will go in change mode..Change the IDOC value..
Thanks,
Naren

How to change the valid from date of the bom header?

ECM is active in the system.
I want to change the valid from date of the BOM header with the help of a change number.
How can I change it?

Hello
Lets assume that, we are going to change Management for controlling Valid From date
Steps to be followed for creation of Change No
Tcode CC01 for Change No
Click on Change Master
Once you enter into Change master, maintain the description
In the Valid from Date, maintain the date from which you BOM should be current
Maintain the Status (01)
Click on Ojbect Type, maintain for which Object types is the Change no needs to be active i.e. for BOM, Rtg, etc
save the Change No
After the change no is created
Enter the Change No during the creation mode of BOM
THe system copies the Valid from date from Change No

How to change the default "no data found"

Hi,
Is there a way to change the default "no data found" message of the "When No Data Found Message" in the Report Attributes?
I would like to change that message for a French message. I know that I can change it manually in every section, but I would like another default messages appearing when i create a Report Section.
Thanks

Can you point me to a tutorial?Sure, Users Guide > Managing...Globalization (Chapter 15?)
Is this not happening at run-time?Yes. What happens at runtime is the selection of the application to run. If you run a page in the Application Builder (app 4000) and that application had not been translated or your browser language were set to some flavor (flavour) of English, you get 4000. If app 4000 had been translated to French, say, and you request a page in 4000 and have your browser language set to French, then you'll really run the requested page from app 4002 which is a copy of 4000 translated to French long before your request came along.
If you look at our distribution, you'll find 9 (or more) versions of each of the internal applications in the builder directory.
Scott

How to change the description of Transaction Type

hi ,expert
   i want to change the description of Tansaction type.
    eg, change the description of BUS2200 :'RFx '   to 'RFQ' .
    please give me some advice. thanks in advance.
     regards
            claud

Hi Claud,
Go to SPROSRM ServerCross App Basic SettingsNumber rangesDefine transaction typesSelect BUS2200 and double click on transaction typesHere you will see BID (transaction type)--Just double click on this and in the screen that follows change the description.
PS: The system will generate a transport request.
Regards,
Nikhil

Regarding Changing the Namespace And Data Type in XSD File

Hi All,
I am Doing File -
IDOC Interface.
I have XSD File For File Sysyetm and IDOC For ECC.
In XSD File I Have Different Name Space And Data Type ,
I Created the Data Type as Same as the XSD File Data type
I Have Namespaces Are Different,
So,I Changed the Namespace in the XSD File with the New Namespace Which I created in IR.
I Changed in Two Places Like this
<b><xsd:schema targetNamespace="http://Sample1.com/xi/file;" xmlns="http://Sample1.com/xi/file;"</b>
But it is giving Error lik this
<b>Cannot load schema with the target namespace http://xxx.com/xi/xx/vamsi/100 to namespace http://Sample1.com/xi/file;</b>
Regards
Vamsi

Hi Vasanth,
Thats what I am Asking
I want to Import XSD File in Data Type
Before I Import the XSD File into Data type I changed the Namespace in the XSD to My Namespace Which is in IR. And I Created the Data Type Name in IR Which I Have in XSD FIle .
So I Am Getting this Error
Please Let me Know Wat to do
Regards
Vamsi

How to change the database character set?

Hi,
We have installed jboss turkey with MySQL and we want to prepopulate name fields like with data from the database in multilingual enviroments i.e. greek,english and russian e.t.c.Where and how can we change that?

I'm not sure, but in other environments, you have to change your JDBC settings.
So, this must be in (imho) C:\Adobe\LiveCycle8\jboss\server\all\deploy\adobe-ds.xml
          IDP_DS
          jdbc:mysql://localhost:3306/adobe
          com.mysql.jdbc.Driver
          adobe
          INSTALLER
          1
          100
          20000
          10
          50
          TRANSACTION_READ_COMMITTED
I would change the
jdbc:mysql://localhost:3306/adobe
to
jdbc:mysql://localhost:3306/adobe?charSET=YOURCHARSETHERE
That's the way I do it in other jdbc connections, so I think this will work here too ...
Regards
Yves

How to change the database character set on physical standby database?

Hi,
We have a database with character set WE8ISO8859P1 and migrated the character set to WE8MSWIN1252 using csscan/csalter scripts. This database has a physical standby database setup also and after the migration, the physical standby database is still showing the character set as WE8ISO8859P1. How can I change the characterset on the physical standby? I raised a Service Request with Oracle, and they said that recreating the standby database is the only supported way of changing the char set on the standby database. Is this true?
Thanks,
Sreekanth

Thank you, Robert, for your reply.
The standby is in sync with the primary.
see below
SYS@sisprod>select * from v$dataguard_stats;
NAME VALUE UNIT TIME_COMPUTED
apply finish time +00 00:00:00.0 day(2) to second(1) interval 12-NOV-2009 14:02:46
apply lag +00 00:00:00 day(2) to second(0) interval 12-NOV-2009 14:02:46
estimated startup time 11 second 12-NOV-2009 14:02:46
standby has been open N 12-NOV-2009 14:02:46
transport lag +00 00:00:00 day(2) to second(0) interval 12-NOV-2009 14:02:46
SYS@sisprod>
I am selecting from v$nls_parameters;
I don't know how to restore the controlfile from primary. Could you please tell me how to do it?
Thanks,
Sreekanth

How to change the width of the database-scalar data type

Similar Messages

Maybe you are looking for