How to change url of bsp page

Hi experts
I have created a BSP application , In login pafe i want to change URL which we use for TEST .
Or can can i redirect to another url , when TEST the page.
Thanks & Regards
Prashant Gupta

Hi Prashant,
Re-directing to another URL on load of page is a very simple piece of HTML code.Put this on the layout of page from where you want to re-direct to the other URL.
<html>
<head>
<metas http-equiv="refresh" content="0;url=http://sdn.sap.com">
</head>
</html>
Here the important line is the 3rd line which begins with "<metas". The operation is "refresh" which means to "refresh" the current page with the information that follows. The content begins with a zero, which is the number of seconds to wait, and then the URL that you should be taken to.
So the above code would re-direct you to the http://sdn.sap.com page as soon as you log in.
Hope this helps!
PS : meta changed to metas to allow adding of the code.
Regards,
Saurabh

Similar Messages

How to change an after login page?

Does anyone knows how to change an after login page from a default page 1 to, let's say page 200?

Jessica,
The URL to run your application is http://apex.oracle.com/pls/otn/f?p=23533.
If you use this, page 3 is the first page shown after login.
Using the URL you gave runs the Application Builder, not your application. If you use the Builder's Run Application icon to run your application, the page in your application that you are requesting is page 1 (or whatever is in the application's Home URL attribute). But running your application this way is something you do in a development environment only
Your basic question has to do with how end users would get to a particular after-login page. End users do not have access to the Application Builder.
Scott

Urgent!! url of bsp page

Experts,
ERP2005
I am creating bsp applications in dev system and each page in the application has the url of dev. system. if i transport the application to Q and then Prod systems, do the URLs be automatically be adjusted according to hostname or it should be done manually? if it is a manual process, should I go for using external aliases?
Regards!

Hi Graham,
let me explain again. i am not a big programmer of BSP applications. I am a HR functional guy. I am trying to use the features of Web AS to create BSP HTML pages easily.
I am not trying to create a complex application. a simple application which contains 40-50 HTML pages which are independent of each other. no navigation is needed.
for example:
dev system hostname is somehostdev.
Q system hostname is somehostq.
Prod system hostname is somehostprod.
say I have a BSP application in DEV as http://<somehostdev>.<domain>.........../startpage.htm
In HR configuration, above URL is used in one field like this:
URL: http://<somehostdev>.<domain>.........../startpage.htm (URL of above BSP page)
Description: Description for Medical Plan
So If the transport request is moved to Q system, i see above entry in the configuration. but it does not have host name of the Q system (obvious from the above entry). it has host name of the dev system. so, in Q ESS portal if I click the link, it is accessing the link from BSP page from DEV system not the one from Q R/3 system. it is because of above configuration.
It seems to me at this moment, to put the URL of BSP Page in the configuration field, and transport the customizing request. with this solution, there is lot of manual process.
first,
1. put the URL of BSP page with Q system host name in the DEV system, and transport the request to Q. Do the testing
2. change the URL of BSP page with P system hostname in the DEV system, and transport it to Q and then P.
there is lot of manual processing involved.
is there any way to get around this?

Changing URLs on multiple pages

Hi,
after Migration from SP2007 to 2010 I have to Change URLs on multiple (about 400) pages. The pages contain XSLTListViewWebparts, DataFormWebparts, ListViewWebparts and XSLT with hardcoded URLs. About 20 URLs per page.
Can I achieve this with some scripts? I am able to write a script for the Webpart properties, but I don't know how to modify the XSLT. Best way would be to simply change the source code, but until now I was just able to modify the "ghosted"
part of the source code. It didn't affect the Webparts and so on.
Thanks,
Stefan

Hi Stefan,
Per my understanding, you might want to change URLs on your pages which are generated from XSLT.
A solution can be like this: as the URLs are hardcoded in these pages, we can iterate through the URLs which you want to modify in each page using JavaScript. Then add the JavaScript
into the master page, it would take effect on the pages which referenced this master page.
About
how to add custom script into SharePoint master page:
http://techtrainingnotes.blogspot.com/2012/05/adding-javascript-and-css-to-sharepoint.html
Feel free to reply if there may be questions about the solution above.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to change sentence Case in Pages for ios

Hi,
does anyone anyone know how to change sentence case in Pages for IPad.
I Mean from UPPER CASE TO lower case.

The IOS version of Pages has no Format > Font > Capitalization facility to transform uppercase text into other case forms. You need to use Pages v5.2.2 on OS X, or export to Word, and use most any other Word compatible word processor. If it is a couple of words, then retype them in the appropriate case.

How to create an url for bsp page to access in IE?

hi friends,
I am new to BSP topic.
I have created 4 BSP pages. and 1 Main BSP page. Now in Main BSP page i attached all the 4 BSP pages links.
Now when i test the Main BSP page it will show all the 4 BSP page links. All are working fine.
But the end user has to access this through IE by typing Main BSP page full path. It's some what becoming critical to enter full path. It will be access in internally(intranet) only not outside.
For this i want create an URL like http://empess.
When the user type this URL http://empess in IE and press enters then my main BSP page has to open.
How to do this. any helps will appreciate...
Regards,
Shree.

hi,
As u said i created External Alias as /ITCESS to my BSP application.
And i select my BSP application name from the Target Element tab. Then i selected the alias name i right clicked on it, i selected TestExt. Alis option. It's working fine.
But now the problem is, i want this to display in IE direclty, when user type the /ITCESS in Internet Explorer addres bar.
Regards,
shankar.

How to login CRM 2007 BSP page use account domain of Microsoft AD

Dear friends,
I am finding solution to setup system with the requisite:
- Login to CRM 2007 Business Server Page use account domain which is managed by Microsoft Acitve Directory.
- Users use only web browser, they didn't use SAPGUI and they must type username, password ( their username,password are managed in Microsoft AD, not in SAP system) in every login to BSP page, don't use solution like X.509 client certificate.
I used to configured using SNC and I could login to SAP System using SAPGUI without type SAP username and password when I log in my computer by account domain( my computer is joined in domain).
But my requisite is have to use account domain( username and password) and type them in web browser when I want to log in SAP system, could not configured to go to directly SAP application ( BSP page ) without type username/password of account domain.
After time looking for solution about authentication :
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/8039306e-cea4-2a10-15b9-8e96d40c51ef [original link is broken]
I think may be I could login to java portal by used username/password of account domain to authenticate after login to portal I use SSO to switch to BSP page without type username password again. This solution may be accepted because I was login to SAP application from web browser and used account domain.
Could you show me, there are anymore solution or how could I do to to set up my above solution.
Thanks and Best Regards.

The normal way to do this is to configure the authentication stack required on a JAVA stack (e.g. portal or standalone Java instance of NetWeaver or dual stack) and then configure the BSP app in SICF transaction to redirect to Java stack when no SSO2 ticket is sent by browser (e.g. user has already authenticated). The redirect to Java stack will be done, such that after user has authenticated to Java stack they will be issued with an SSO2 ticket and redirected back to the BSP app URL. From end users perspective, they will access the BSP app URL and get authenticated using Active Directory, and they won't know about the redirection since they will be logged into the BSP app once they have authenticated.
The authentication using Active Directory can be done using two methods:
- Using credentials already on workstation from workstation logon, e.g. using Integrated Windows Authentication
- Showing user a form where they enter AD account and password.
Thanks,
Tim

How to pass values between BSP pages?

Friends,
I have used htmlb controls within my BSP page. I need to pass the value that i provide in the first page to the next BSP page and display it. I used something like
navigation->set_parameter( name = 'val1' value = val1 ) and navigation->goto_page( 'second.htm' ).
Now, how should i read this value in the second.htm?. I tried to bring this value using the
data ename type string.
ename = navigation->get_parameter( name = 'val1' )
in the onInitialization event. But its not working.. How should i go about it?. Do i have to set anything in the Page attributes?. Is it possible to change the text of a label at runtime?.
Expecting an early reply.. suitable answers with code snippets will be rewarded..
Thank you,
Saravanan.

Here's one way:
I have page attribute pa_error_no of 'Error.htm'defined as
 TYPE CHAR3 3-Byte field
In OnInputProcessing of page1.htm
 navigation->set_parameter( name = 'pa_error_no'
 value = '003' ).
 application->cv_page_next = 'Error.htm'.
 navigation->goto_page( application->cv_page_next ).
Then in 'Error.htm' (I happen to use it in the layout) you can reference it in OnInputProcessing also
<%
 case pa_error_no.
 when '001'.
 if not ( application->cv_bp_number is initial ).
%>

How to figure out a BSP page application in Sicf

Hello Experts,
We are facing some issue in a BSP application,
We are trying to implement SRM in our proj. The main page called as registration page ,
for which we need to do some changed...
but who can i find which funtion module or which application that BSP page is running on,
I.e.
what i acctually need to do is that,
After the supplier fill the form it is getting saved i need to know what event is getting triggered in backend for saving that data..
can u help me on this...where do i find it.
please give the steps
Thanks IN advance!!!

Hello,
BSP name as service name in SICF...
To know how it is handling event - it depends on which type of application is..
1. If it is following MVC model, please look in DO_HANDLE_EVENT for detailed logic
2. If it is not MVC and having ;Page with flow logic' concept - then look in event handler tab...
Thanks

How to change Language settings in Pages

When i installed ipages 08 i made the mistake of selecting english instead of british english as my language setting. I was wondering if there is any way to change it permanently to british english, its driving me mad having american corrections. I know how to change the language on selected parts of text but wanted to know if i can make my default language british english as its really annoying having to change it for every document i make. I've tried moving iworks into the trash can and reinstalling it, but i never got the option to change the language.

Dani,
Welcome to Apple discussions.
Pages looks at your system preferences > international > language setting to determine your preferred language. If it's set on "English," then you've chosen American English. If British English isn't in the list, click on the Edit List button, then put Brit English at the top of the list.
-Dennis

How to change spelling language in Pages 09?

I have just downloaded Pages on my Mac but the spelling is American so everything that is spelt with an "S" in English and "Z" in American is showing up with that red underline because it thinks it should be spelt with a "Z" and not "S". This is very annoying because I do not live in America and use American spelling in my normal every day life.

I am having the same problem.... I have found out how to change it to British English as it is called, but it will not save that way, I will try and explain how to change it, but really its only step one of the problem!
1. click on the inspector button, its on the right on the top bar of pages and is blue with an I in the middle
2. look for the capitol T along the top of the inspector box and click
3. near the bottom you will see language settings and here you can choose British English.
What I need to know is how to get this to stay so that when I re-open this it doesn't go back to US English!
Please help!!! I was so excited to get rid of MS Office as it had annoying faults, I really hope I can resolve this because so far I have been so pleased with iworks!

Adding a URL to BSP Page

Hello,
I want to add an URL to the BSP page, could anyone give me insights on this.
-Kewl

By adding a URL, do you mean that you want a link to another URL? You could always a plain HTML <a href>. Or you could use the HTMLB extension <htmlb:link>. Examples of the HTMLB elements can be found in the sample app SBSPEXT_HTMLB and HTMLB_SAMPLES.
On the other hand are you needing help building a URL to another BSP application? Or perhaps did your question have to do with navigation between pages or applications?

How to change e-mail in Pages and not loose documents

I changed my e-mail address from "aol" to "me". I ccn't open Pages documents without buying Pages again for $9.99 under my new e-mail address. How do I change my address for Pages without incurring a new charge and setup, and I don't want to lose my documents?

Is it for the Apple-ID you have changed the address?? Where did you change the mail address? On the computer? The Pages application per sei doesn't care but maybe it is the MacAppStore that thinks you are a new user. Better ask in the MacAppStore forum.

How to change URL for "Log Out" link in CE?

We need the Communications Express "Log Out" link to go to a different page to the usual log in page. How can I change this?
I've found the logout function in the uwc/common/Header.jsp file which looks like:
function logout() {
url = "<%= getLogoutURL(request) %>";
top.window.location = url;
}and I've found the getLogoutURL fuction in the uwc/js/resourceBundleUtils.js file which looks like:
public String getLogoutURL(HttpServletRequest request)
 return UWCApplicationHelper.getLogoutURL(request);
}But I can't find where the URL is actually configured.
any help would be much appreciated.
Edited by: brett_ac on Jun 30, 2009 5:05 PM

brett_ac wrote:
We need the Communications Express "Log Out" link to go to a different page to the usual log in page. How can I change this?
I've found the logout function in the uwc/common/Header.jsp file which looks like:
function logout() {
url = "<%= getLogoutURL(request) %>";
top.window.location = url;
You got it in one. If you wanted the logout button to redirect to google you would set:
function logout() {
 url = "http://google.com/";
 top.window.location = url;Then restart the web-container.
and I've found the getLogoutURL fuction in the uwc/js/resourceBundleUtils.js file which looks like:
public String getLogoutURL(HttpServletRequest request)
return UWCApplicationHelper.getLogoutURL(request);
}But I can't find where the URL is actually configured.UWCApplicationHelper is in inbuilt java class. The UWCApplicationHelper.getLogoutURL java function returns:
<current URL context>/base/UWCMain?op=logoutSo for example if UWC is deployed to http://myserver.domain.com/uwc you would get a logout URL of:
http://myserver.domain.com/uwc/base/UWCMain?op=logoutRegards,
Shane.

How to Change URL of BPA after clicking on Open Document in PO Notification for India Localization?

In the Purchase Order Approval workflow notification , there are two links at the bottom of page under heading REFERENCES,
- view PDF
- open document
So when we click on open document, the Oracle Forms loads and purchase order screen will appear in the screen.
In case of India localization, for standard PO the India local screen opens, where we can see the taxes by clicking on Taxes Button.
But in case of blanket purchase agreements, when we click on open document link from the notification,we are routed to the application with the screen of global purchase order, instead it
should go to Purchase Orders(Localization).
We want to move to the India local po screen for BPA.
So please let me know, where I can change the URL for Blanket Purchase Agreements.
Regards
Sandeep

Hi kalyani,
Please check my inbound plug code...tell me what changes wee need to do and where wee need to add this code...once again thanks for your reply..
METHOD
ip_inboundplug.
**CALL METHOD SUPER->IP_INBOUNDPLUG
** EXPORTING
** iv_collection = iv_collection.
DATA: lt_ivr_url_param TYPE tihttpnvp,
ls_ivr_url_param TYPE ihttpnvp,
lr_searchcustomer TYPE REF TO if_bol_bo_property_access,
ls_searchcustomer TYPE crmt_bupa_il_header_search.
CALL METHOD cl_crm_ui_session_manager=>get_initial_form_fields
CHANGING
cv_fields = lt_ivr_url_param.
lr_searchcustomer ?= me->typed_context->searchcustomer->collection_wrapper->get_current( ).
CHECK lr_searchcustomer IS BOUND.
READ TABLE lt_ivr_url_param INTO ls_ivr_url_param WITH KEY name = 'sap-phoneno'. "'sap-phoneno'.
IF ls_ivr_url_param-value IS NOT INITIAL.
ls_searchcustomer-telephone = ls_ivr_url_param-value.
CALL METHOD lr_searchcustomer->set_properties( EXPORTING is_attributes = ls_searchcustomer ).
eh_onsearch( ).
ENDIF.
ENDMETHOD

How to change url of bsp page

Similar Messages

Maybe you are looking for