Changing URLs on multiple pages

Hi,
after Migration from SP2007 to 2010 I have to Change URLs on multiple (about 400) pages. The pages contain XSLTListViewWebparts, DataFormWebparts, ListViewWebparts and XSLT with hardcoded URLs. About 20 URLs per page.
Can I achieve this with some scripts? I am able to write a script for the Webpart properties, but I don't know how to modify the XSLT. Best way would be to simply change the source code, but until now I was just able to modify the "ghosted"
part of the source code. It didn't affect the Webparts and so on.
Thanks,
Stefan

Hi Stefan,
Per my understanding, you might want to change URLs on your pages which are generated from XSLT.
A solution can be like this: as the URLs are hardcoded in these pages, we can iterate through the URLs which you want to modify in each page using JavaScript. Then add the JavaScript
into the master page, it would take effect on the pages which referenced this master page.
About
how to add custom script into SharePoint master page:
http://techtrainingnotes.blogspot.com/2012/05/adding-javascript-and-css-to-sharepoint.html
Feel free to reply if there may be questions about the solution above.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • How to change url of bsp page

    Hi experts
    I have created a BSP application , In login pafe i want to change  URL which we use for TEST .
    Or can can i redirect to another url , when TEST the page.
    Thanks & Regards
    Prashant Gupta

    Hi Prashant,
    Re-directing to another URL on load of page is a very simple piece of HTML code.Put this on the layout of page from where you want to re-direct to the other URL.
    <html>
    <head>
      <metas http-equiv="refresh" content="0;url=http://sdn.sap.com">
    </head>
    </html>
    Here the important line is the 3rd line which begins with "<metas". The operation is "refresh" which means to "refresh" the current page with the information that follows. The content begins with a zero, which is the number of seconds to wait, and then the URL that you should be taken to.
    So the above code would re-direct you to the http://sdn.sap.com page as soon as you log in.
    Hope this helps!
    PS : meta changed to metas to allow adding of the code.
    Regards,
    Saurabh

  • Automator - Change Image Type - Multiple page PDF- TIFF conversion

    I was able to do this on a friend's computer (not sure which version of OS X they were running), but this seems impossible on Snow Leopard.
    I need to convert hundreds of multiple page PDFs to TIFFs. I can't get this to work, and the Change Image Type option only lists single page PDF conversion. I could separate PDFs into multiple files, convert to TIFFs, but then I don't know how to recombine a bunch of TIFF pages into a larger file. From google searches, I know this is possible using tiffutil, but I don't really understand how to use that well, and I really need an automatic process.
    I'm at my wits end with this, because I did it just last week on someone else's computer and it was easy as pie. Why can't you convert multiple page PDFs in Snow Leopard?
    Any ideas?
    Thanks!

    I just tried this - two problems.
    It creates a separate tiff document for each page of the input pdf.
    Also, this action is just annoying because it results in randomly named files in some temp folder that i can only locate using the reveal finder item action. I know I can rename files in automator, but I'd really like to have the output file have the same name as the input file.
    It confuses me why they would remove this functionality in Snow Leopard.

  • Change source in multiple pages

    I am trying to find out already for long time, but can't seem
    to find it:
    I made a mistake with making a photo gallery and now all the
    seperate photo pages have a mistake in the photo src (link). It's
    easy to fix, but now I have to do it by hand for 200 pages.
    Isn't there a way to do it automaticly? It's the same little
    code that needs to be deleted in every page.
    Please help!
    Donnnie

    You can just use "Find and Replace" and tell it to search
    only the selected files or directory.

  • When I open a new tab, the new tab used to show shots of 6 or so of the last sites I'd viewed, so I could easily click on one and go to it. Now it shows a blank tab and I have to type the URL of the page I want. How can I change it back?

    When I open a new tab, the new tab used to show shots of 6 or so of the last sites I'd viewed, so I could easily click on one and go to it. Now it shows a blank tab and I have to type the URL of the page I want. How can I change it back?

    Did you have the Google Toolbar installed?
    * http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites
    Other extension that have a similar feature:
    *Speed Dial: https://addons.mozilla.org/firefox/addon/4810
    *Fast Dial: https://addons.mozilla.org/firefox/addon/5721

  • Single adf task flow portlet with multiple pages and paramter from url

    Hi ,
    I have made a adf task flow portlet with a parameter.
    I have made a portal applcation and added multiple pages . in each of the page I am consuming that portlet through wsrp2.
    I have mapped the task flow parameter in page bindings of the pages with #{param.code}. where code is the get parameter.
    I have edited navigatinoal template so that when i click the pages , code parameter also get added in the url.
    issue
    When I run the applcation and visits first page with get parameter i get the right result. but when i click the on the other page which has some other value for the same get parameter , it doesnt display the value. But the other page shows me correct value if I go this page first but the later page doesnt display any value.
    thanks

    1001446 wrote:
    Hi ,
    I have edited navigatinoal template so that when i click the pages , code parameter also get added in the url.Can you paste the code from the template here?

  • URL never changes regardless of which page I am on, is there a fix?

    The URL never changes regardless of which page I am on in my website. For instance, my "Welcome" page is; www.lisarene.com, my "Blog" page is www.lisareme.com, my "Photo" page is www.lisarene.com......
    Is there a way to have the URL specify a specific page in my website, for instance; www.lisarene.com/photos.
    It seems like others are questioning the same thing but I haven't read an answer specific to this question.
    Thank you

    Yes, there is a fix. My site can now be reached by typing my domain name in the URL, with the www.yournamehere.com or with out the www - just http://yournamehere.com The URL now shows specific pages such as; yournamehere.com/Recipes/Entries/2007/10/5_Flatbread.htm
    This was the goal for many of us. This way we can direct someone to a specific page/entry in our blogs/websites when using our purchased domain names.
    I went to the link Varkgirl suggested and followed her directions as posted in the link (note her PS further down on the thread, where you need to put in your www.yourdomain.com into your .Mac account settings).
    It works perfectly! I managed it and find these things daunting at times. If your like me, take your time, read through the thread a couple of times and then simply follow the directions Varkgirl shows.
    Piece of cake! (and some sweat)

  • Passing parameters from URL to multiple iViews on a page.

    Hi Everyone,
    Could you please point me to a guide or howto, which explains on passing parameters from URL to multiple iViews on a page. I already know how to pass parameters from URL to a single iView (wiki).
    Thanks!
    Indy

    Hi Indy,
    Currently, passing parameters to the page which contains VC iViews is not supported, only directly in the iView's URL.
    Regards,
    Natty

  • Scanning multiple pages into one document with an automatic document feeder

    when using automatic document feeder to scan in multiple pages - using the Image Capture app, this process does not work for more than 2 pages. However works perfectly in PC environment.
    Using a MacBook Pro with 10.8.4 and a Lexmark Interpret 405S All In One Scanner.
    Is there any other all in one device that can perform this function in a Mac environment?
    Please advise.

    Hi @FentyFly ,
    I see by your post that you would like to know how to scan multiple pages into one file. I would like to help you out today.
    From the HP Scan Software, click on the link for Advanced Settings, then uncheck Create a separate file for each scanned page.
    Here is a URL for how to scan and change the settings. Just select your operating system.
    Scan.
    What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
    If you need further assistance, just let me know.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Multiple Pages in a page

    Hi all,
    I am trying to add multiple pages to a page as links and not as full page.
    The scenerio is that i have about 7 intranet sites of my company and to every site i have to get SSO done and that i achived through appintegrator iview , now my problem is that i have to show all the intranet sites on the welcome page as link to the user so that when user click on to the link than he directly enters the site,
    but if i assign all the intranet sites as pages and assign it to a single page than it comes as page in page and not as link,
    is their any method that i can make my iViews or pages as link in another iview or page
    can somebody help me on this.
    Regards,
    Naveen Gupta

    Hi ,
      The scenario is that i have made many pages of the intranet sites of lntinfotech using appintegrator iview and url iview and now i want to assign all these pages in an iview as a link so that if the user click on the link than page of that intranet site should open.
    What i have done is
    1.Created pages for intranet sites
    As u told
    2.Created a JspDynPage and in the jsp, create  links something like this.
    <hbj:link
        id="link1"
        text="Link to google"
        reference="http://www.google.com"
        target="_TOP"
        tooltip="this takes you to: http://www.google.com"
        onClick="GoogleLink"
        />
    In the above code, in the reference attribute, you can mention the url of the one of the pages you have created. Similarly create 7 links. The url of the page can be obtained if you see the preview of that page.
    3.After creating the JspDynPage, create an iView from the par file.
    4.Add this iView to the main page you want. So now, your main page will contain links to all the pages you want.
    You can click on the required page and go to that link.
    But the problem is that the url in the refrence is to be provided is dynamic and changes everytime u refresh the page as  theses are now portal pages and not html pages and the error which i face is:
    iView not found: pcd:com.sap.portal.system/temporaryobjects3/9204ee5769c18e9b7928130a3f972615.
    Exception id: 11:00_05/04/06_0005_6132650
    AS u suggested:
    Instead of hard coding the reference, you can give it dynamically. In the final iView in which you have created links, you would have created a bean class when creating JspDynPage. In this bean class, create getURL and setURL() methods. Store the appropriate URL wherever you want in the bean and use the bean in the JSP page. Then you can specify the reference something like this: reference="<%=myBean.getURL()%>".
    But i dont know in which object would be the url path come from.
    Help me in this case.
    Message was edited by: Naveen Gupta
    Message was edited by: Naveen Gupta

  • Multiple pages refreshing to common page

    I've been noticing an issue regarding Safari web browser on the iPhone.
    I have my main page set to appleopolis.com, From there, I click on a link and it opens a new browser page to say, Google search (or any page for that matter). If I click refresh on the second browser page, all the pages (pages 1 and 2) refresh to whatever URL I refreshed. This happens to all pages, regardless of whether I have 2, 3, or more pages open nor does it matter which page I refresh.
    Also, I don't have to have the second page opened as a "popup" for this to occur. For Example...
    Page 1 is set to Google.com
    Page 2 is set to NYTimes.com
    Page 3 is set to CNN.com
    ...all three pages were opened individually by clicking the icon on the bottom right corner of the screen. If I were to refresh Page 2, then Page 1, 2 and 3 refresh to NYTimes.com If I refresh Page 3, then Page 1, 2, 3 refresh to Page 3.
    Anyone else have this issue? Any idea why?

    Turning off pop-up blocking half-resolves my issue. If I open multiple pages individually and refresh a page, all the pages no longer refresh to a common page.
    However, in the example where I open a new page through a link from appleopolis, I still have all pages refreshing to a common page. Appleopolis seems to open web-links through a pop-up or new window script. When I click on the link, the address bar for the appleopolis page changes url's but doesn't load unless I hit reload on any of the other pages.

  • How do I use one layer for multiple pages?

    I've been using Photoshop to create a series of web pages. I have about 20 such pages right now.
    Unfortunately, I need to change the navigation menu that is found on all 20 pages.
    To make these changes, do I need to change 20 different files? Or is there a way to link one layer group to multiple PSD files so that editing it once results in it changing on all 20 pages?
    Thanks,
    C

    You'll have to make some sort of change to each document, but it should only take a few minutes when there's only 20 of them. You edit the group in one, then for each of the others, simply duplicate or drag the edited group into it and delete the old group.
    There is also the option of structuring your workflow with Smart Objects which can be refreshed in each document with a common document containing only the menu group. For linking of Smart Object content, there is a third party plug-in but I don't know whether it is reliable.

  • The address bar is not displaying the URL of the page

    When I open a tab, I cannot see the URL of the opened page in it. If I enter a new address and press enter, I go to the page. The URL displays the entered URL, but doesn't change for the new pages that load.
    Also, the back/forward buttons do not work. I'm guessing it's related to the address bar issue.

    Found it! The "Redirect Remover" extension was causing the problem! Thanks for your help :)

  • How do I scan multiple pages into one pdf document on a HP Envy 4501 Printer

    My HP Envy 4501 Printer won't let me scan multiple pages into one pdf document.
    I went to "Advanced Settings", clicked on "file" and made sure that the check box next to "Create a separate file for each scanner page" was unchecked.
    When I clicked the Save button it showed the page that I scanned and showed 1/1.  On the right side it had options for changing the brightness and Contrast, Rotate and Crop and "Back", "Save" and "Done" buttons, but nothing about scanning another page.
    Not to mention HP's Customer Support is useless!
    I'd appreciate any help I can get with this problem.
    Thanks,
    Mark

    Hi BH,
    I see your diagram.  I just scanned something.  The screen that I'm looking at right now shows the preview page and the scroll box to the left of that just like in your diagram.  The screen does not show the + button nor does it show the red x button under the scroll box as in your diagram.  I can't see the plus sign because it is not there.
    I tried re-installing the software and drivers as you suggested but that did not have any affect.
    Thank you for trying to help me with this problem but it hasn't worked, therefore I can't mark the reply "Accept as Solution".
    I've noticed that on HP's support forum web page there is only 1 solved request for assistance.  That doesn't give me much confidence in HP.
    Please reply back to this post to let me know if there is anything else that I can try or if you know someone else at HP that can help.
    If I don't here back from you, I'm returning this HP Envy 4501 Printer to get my money back to use it to buy a printer from one of HP's competitors.
    Thanks,
    Mark  

  • Scanning multiple pages with preview and brother MFC-7440n

    Hi,
    because of some problems with my old scanner after i installed snow leopard, i bought a new compatible one. It's a brother MFC-7440n with apple build-in drivers.
    When i start scanning to preview with more than one page, there will be a pdf document for every page. It doesn't matter if i choose "create just one document".
    First i wondered because in leopard preview multiple pages are displayed like in snow leopard. But this is wrong. There is one pdf file for every page.
    How can i change that issue? When i scan more than one page, i wan't one pdf document with multiple pages, not a pdf per page.
    Thanks a lot.
    Dominik

    Hi Dominik,
    What about Brother's scanner software? Do they have a scan program you can use to create multiple page documents? I have a Canon, and its software did that. The only other way is how I explained in my previous post. I have no issue using Preview for the simple document scanning I do. But if you have more needs, perhaps the Brother scan program should be installed.
    Brother has issued a scanner driver update on 9/10....
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadindex.html?reg=us&c=us&lang=en&prod=mfc7440nall&type2=1&os=all&flang=all&dlid=dlf003973
    Also several other updates:
    http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/downloadtop.html?reg=us&c=us&lang=en&prod=mfc7440nall

Maybe you are looking for