How to change value of constant for "Disabled" Property Node?

Hello all,
I'm attaching a vi example of what I'm wanting to do. It is happening during the event for "Left Selectorrogrammed 1: Value change.
Basically I've created a property node for a LED boolean control. After it is clicked, I am wanting to disable it so the user cannot change the value (I have a reset all button for use on that).
I've created the property node for this control for Disabled. When I am in the block diagram, I change it to write mode.
I've rt clicked on it, and said "create constant", which it does. However, the constant comes up every time as "Enabled". I've tried clicking all over this constant, and looking through all the properties, but I cannot figure out how to toggle through the values or set the value of this constant from "Enabled" to "Disabled".
I see where you can edit the items of this constant...but I'm guessing there is some way to toggle this constant to the value you wish....any suggestions?
Thanks in advance,
cayenne
Solved!
Go to Solution.
Attachments:
laptop_test_public.vi ‏17 KB

To change a constant value your cursor needs to be in the "finger" mode.
You can select this by holding down shift and right-clicking on the diagram - then select the finger.
Another way is to set Automatic Tool selection:
Tools >> Options >> Environment >> Lock automatic tool selection
With this option, LabVIEW will choose the tools for you.
Play with it a bit to see how it works.
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help.

Similar Messages

How to change value of array element using property node

hello all : )
im using an array of combo-box. the size of array is not fixed.
i want to use the strings[ ] property of combo-box to enter selection texts but since i have placed it inside the array im unable to use this property.
i used 'arrayelem' reference property and connected property node to it but didnt got strings [ ] in the selection.
so is there any way i can use the strings [ ] property
Solved!
Go to Solution.

the picture what I posted is a snippet. It is a png file which also contains a vi:
http://www.ni.com/tutorial/9330/en/
I have found this post. I am just reading it:
http://forums.ni.com/t5/LabVIEW/combobox-in-array-why-does-it-work-this-way/m-p/2146916/highlight/tr...
It might help...
hmm, it is more complicated as I thought )
edit: just to be CLEAR: so you want to create a new selection LIST for each of the array elements (comboboxes)) OR you just want to set all the comboboxes to a particular value which is ALREADY in the combobox list??

Possible Issue with help for "disable property node"

Hi, In Labview version 9.0 (32-bit) there seems to be a conflict between help info for the Enum constant as applied to the disable property node . If I right click on a control variable and select create-> property node -> disable. If I then right click on disable -> help for disable, the help lists the following interger assignment 0 - Disable, 1- Disable and Greyed, 2 Enable. If however, I right click on the generated Enum constant and select properties -> Edit Items, the listing order is as follows; 0- Enable, 1- Disable, 2- Disable and Greyed. The latter assignment is how the Enum constant actually works. It appears that the help information may be incorrect.
Regards,
Pat
Solved!
Go to Solution.

Hi,
I compared it with 8.2.
In 8.2 creating a constant, indicator or control by right clicking on the "disabled" property node gave an object of type U8, which operates in accordance with the "help for disabled", ie
0=Enable
1=Disable
2=Disable/grey
In 9.0/2009 right clicking and creating on the property node gives an Enum (of datatype U8) with names/values in agreement with 8.2, and operation as in 8.2, BUT the "help for disabled" message says
0=Disable
1=Disable/grey
2=Enable
Thus I would agree that this is a documentation error, and the LabVIEW is correct.
N.I. Can we have a CAR please?
P.S. I do think that it is a good idea to have made the disabled property an enum, whilst maintaining compatability with previous code. I always wondered why it wasn't that way in earlier revisions.

How to Change Value set Dynamically for a Parameter in Apps?

Hi All,
I have a requirement where i need to change the value set dynamically for a given Parameter. This goes as, I have a Concurrent Program with 4 parameters. First Parameter is mandatory Business group.Second Parameter is Warehouse. Based up on the First parameter the second parameters LoV's are displayed, the third and fourth parameters value sets are dependent up on the Second parameter value. Parameter 2,3,4 Value sets are Table type. So i Used .$FLEX$.Value_setname to retrive the LOV's
The Requirment now is that if the User doesn't enter the Parameter 2 than the Third Parameter field must be Open and he must be able to enter the Free text. In my case it is an Order Number. If the User enters the paramter 2 value than LOV's for ORder number pertaining to that Warehouse must get displayed. I've figured that this can be possible only if i change the Valuesets Dyanamically. I'm not sure if that is possible or not.
I have tried :
Using a Dummy Parameter with a new valueset(Transactable Independent) and giving Y and N based up on Warehouse parameter input.
SELECT (DECODE ( :$FLEX$.WAREHOUSE_NAMES,NULL,'Y','N')) from dual;
The default type was SQL.
Then in the 3rd Parameter i have used Case function to differentiate Y or N. The third parameter being ORder number, is a table type and derived from Oe_order_headers_all.
In the Query section i tried using dummy parameter value set to retreive the values. I was terribly Unsuccessful in doing so.
Does the above Case exists or is Doable? Please, Help me out if somone had worked on Similar thing or have any idea of standard report/program using it in Oracle.
Thanks alot for the Help!

You will probably have better luck on the eBusinesSuite forum. This is more of a setup issue when defining your LOV and program parameters than it is a SQL or PL/SQL issue.
http://forums.oracle.com/forums/category.jspa?categoryID=3
Good luck - this is an aggravating issue to work with and I wish I did have the answer for you!

How to change the Display Pattern for Decimal Fields dynamically

hi all,
Can any one help me how to change the display pattern for decimal fields dynamically???
Currently I am using z,zzz,zzz,zz9.999 Display pattern for Quantity Field. If the value is blank it is displaying as 0.000 on the Screen. But I don't want this to be printed.
Please help me how to solve this ASAP.
Thanks,
Prabhu

Hi,
Alternatively you can handle it in the context.
In the context area, click on the quantity. In the bottom, click on the conditions tab, and put a condition
<quan field> NE initial.
So the field will not be printed if there is no value.
Regards,
Vidya Chowdhary A.

How to change value of ${eol} from \n to \r\n, writing by File Adapter

Hi All,
How to change value of ${eol} from \n to \r\n, while writing file through File Adapter.
As my file is being created in Linux environment, so for new line separater, \n is used. I mounted this file directory to windows System.
As Windows requires \r\n for new line seperator. So I need to change value of ${eol} in the Schema created for file writing.
Can any one provide help regarding this.
Thanks in advance

Hi,
When an XML payload is written to a file \n would be used as the default line separator regardless of if its windows or linux, as per the XML specification http://www.w3.org/TR/REC-xml/#sec-line-ends.
As such, one need not worry about the line separators because, the XML file would eventually be processed by a parser which usually would be able to understand both line endings (as they are whitespace characters as far as the parser is concerned).
If you want to convert the line terminators (for readability etc), 10.1.3.4 has a new feature - in the XML schema definition for the file adapter payload, add these two top level directives to the schema element:
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
nxsd:normalizeLineTerminators="false"
Regards,
Shanmu.

How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec

Check Content:
Verify all accounts require passwords.
Run the DUMPSEC utility.
Select "Dump Users as Table" from the "Report" menu.
Select the following fields, and click "Add" for each entry:
UserName
SID
PswdRequired
AcctDisabled
Groups
If any accounts have "No" in the "PswdRequired" column, this is a finding.
Some built-in or application-generated accounts (e.g., Guest, IWAM_, IUSR, etc.) may not have this flag set, even though there are passwords present. It can be set by entering the following on a command line: "Net user <account_name> /passwordreq:yes".

Hi Malik,
How to change "No Password required" for Guest to "Yes"account under Somarsoft Dumpsec
Please contact SystemTools Technical support to get more efficient support regarding this matter:
http://www.systemtools.com/support.htm
http://www.systemtools.com/toolboard/
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to change the sysadmin password for maintenance wizard if you have forg

How to change the sysadmin password for maintenance wizard if you have forgotten the password and can't log in.

Log into SQL*Plus as the $EOFUSER and do:
update eof_user set password = 'passwd_you_want' where user_id = 0;
commit;
-Vikki
Product and Development Manager for Maintenance Wizard

How to change the package name for a msg class

Can anybody tell me how to change the package name for a message class.
and how will it effect in the rerport?
thanks in advance
kp

>>and how will it effect in the report?
You wouldn't see any direct effect on the Report.. But if you transport the report to QA & leave the Message class in Dev, it might result in syntax issues & you will not be able to execute the report. Just ensure that both of them get transported to QA & you will be fine.
~Suresh

How To Change Root Folder Reference for href - anythingslider links?

How To Change Root Folder reference for href - anythingslider links?
My root folder in Web Apps>Carousel in admin is set at /carousel/ (http://bestinscotland04.businesscatalyst.com/carousel/slide-2 - as an example) but I want it to link to a specific page at the root level (specifically /scottish-menswear/mens-highland-kilt-outfit).
I can't find the controls, css, or html file to enable my picture to link to this product page.
I'm sorry for the amateur question - I've never had formal training and it's always a reverse-engineering situation with me.
Thank you.

One way to address this is to use the Virtual Web Host feature.
I've uploaded a simple application note to help guide you through the steps.
An alternative would be to create an html at /Web/ which forwards to /Web/Joomla. Not a great solution, I know.
I'm sure there is a way to change the setting in a linux configuration file, but I don't know which file that is in. Maybe some other linux savy community members could help out with that?

How to change RSAPublicKeySpec to Key for encrypt?

I have RSAPublicKeySpec and I want to encrypt message with this key.
How to change RSAPublicKeySpec to Key for encrypt message?

I try to do this
try {
kf = KeyFactory.getInstance("RSA");
pk = kf.generatePublic(pubCard);
catch (NoSuchAlgorithmException ex4) { System.out.println("1");
catch (InvalidKeySpecException ex4) { System.out.println("2");
try {
Cipher cipher = Cipher.getInstance("RSA");
try {
cipher.init(Cipher.ENCRYPT_MODE, pk);
catch (InvalidKeyException ex2) { System.out.println("a");
try {
ticket = cipher.doFinal(mes.getBytes());
catch (IllegalStateException ex3) {System.out.println("b");
catch (IllegalBlockSizeException ex3) {System.out.println("c");
catch (BadPaddingException ex3) {System.out.println("e");
catch (NoSuchAlgorithmException ex1) {System.out.println("f");
catch (NoSuchPaddingException ex1) {System.out.println("g");
It cougth exception that "NoSuchAlgorithmException"
What wrong with line
Cipher cipher = Cipher.getInstance("RSA");
please tell me

How to change the menu text for menu exit in Version 3.1i

Hi,
I am working on an enhancment in CJ02 transaction in 3.1i version. I have implimented menu exit for it , but I am unable to change the menu text for it.Please let me know how to change the menu text for that menu.
Thanks
Suman

Hi Shree,
Thanks for the response. Please find the Enhancement name here "CNEX0006".
Thanks
Suman

How to change the Safety Intervals for standard Content datasources

Go to RSA2->give your datasource name ->setting up GEN delta
It shows you whts the safety interval setting.
<b>
How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.</b>
Thanks
Soniya Kapoor

Hi Soniya,
1) try RSA6.....also RSA8 for additional info.
2) useful link:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
Good luck, BB

How to change the account setting for App Store

My last question wasn't so clear, so I would like to post again. I want to know how to change the account setting for App Store. I have changed in the Settings but it doesn't reflect in App Store.
Thanks,

once you sign out just click sign in and put the new email address in the "Username" field and your correct password then click OK
it will look like it is doing nothing but give it time and it will sign you in with the new username.
is it possible you have multiple itunes accounts?
when you changed your itunes account from your me.com to your gmail.com address did you change it within the itunes Edit Account Info ('Store' menu then select 'View My Account', then sign in , select edit account info) or did you just create another itunes account?
be well

How to change the browser used for Google search from context menu of selected text?

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

How to change the browser used for Google search from context menu of selected text?
It uses Safari. But I want to use Chrome (it's my default browser).

How to change value of constant for "Disabled" Property Node?

Similar Messages

Maybe you are looking for