How to changes the status of IDOCs from 18 to 06....

Hi All,
I have set an Idoc to send the invoice to a midleware called Inovis via ALE, everything is looking OK at the moment and we are getting status 18. however for some reason Inovis needs the status 06, I have not idea how to set this change.
Thanks in advance
Regards

Actually we asked Inovis Consultant to resolve this matter, apparently it was a problem with the message confirmation.
Regards
Alexis

Similar Messages

How to change the status of IDOCS from 29 status to 53

Guys
how to change the status of IDOCS from 29 status to 53
Thanks in advance

Hi Krishna
IDOC_STATUS_CONVERT Use this FM and reward me

How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

HI,
How to change the status of test cases in Test Plan from Design to Ready using Excel VBA

Thanks Florin,
Your piece of code has worked alot, and it was very helpful in changing the Status of the Workitem to "READY" for all the Users fo the workitem.
Points have been rewarded for your help.
Process: We have acheived this using the "Work Item Exits", Usng "AFTER_EXECUTION" Method.
Note: The Exit will be executed if "exit_cancelled" statement is present/used in the work item method. if not it is not taking to the exit code. I'm unable to find the reason for it. Florin can u please explain this point.
Please check the link for adding the code in Work Item Exits.
http://wiki.sdn.sap.com/wiki/display/ABAP/ProgramExitsIn+Workflow
Please find the Code:
method IF_SWF_IFS_WORKITEM_EXIT~EVENT_RAISED.
Get the context of the workitem
me->wi_context = im_workitem_context.
After execution of the workitem call the method AFTER_EXECUTION
if im_event_name eq swrco_event_after_execution.
    me->after_execution( ).
endif.
endmethod.
METHOD AFTER_EXECUTION.
This method acts as the Event Handler for SWRCO_EVENT_AFTER_EXECUTION
DATA: LCL_L_WID TYPE SWW_WIID,
        L_STATUS TYPE SWR_WISTAT-STATUS,
        L_NEW_STATUS TYPE SWR_WISTAT,
        L_SWR_MESSAG TYPE STANDARD TABLE OF SWR_MESSAG,
        L_SWR_MSTRUC TYPE STANDARD TABLE OF SWR_MSTRUC.
Get work item
CALL METHOD WI_CONTEXT->GET_WORKITEM_ID
    RECEIVING
      RE_WORKITEM = LCL_L_WID.
L_STATUS = 'READY'.
CALL FUNCTION 'SAP_WAPI_SET_WORKITEM_STATUS'
    EXPORTING
      WORKITEM_ID    = LCL_L_WID
      STATUS         = L_STATUS
      USER           = SY-UNAME
      LANGUAGE       = SY-LANGU
      DO_COMMIT      = 'X'
    IMPORTING
      NEW_STATUS     = L_NEW_STATUS
     RETURN_CODE    = SY-SUBRC
    TABLES
      MESSAGE_LINES = L_SWR_MESSAG
      MESSAGE_STRUCT = L_SWR_MSTRUC.
IF SY-SUBRC EQ 0.
ENDIF.
ENDMETHOD.
Thank You Once Again,
Ajay Kumar Chippa

How to change the status of a production order

Dear All,
May i know how to change the status of a production order.I want to de-active the status like OPGN (Operation generated).This status is updated as there was no routing assigned to that particular production order during its creation
Thanks and Regards,
Varun Siddharth

Dear,
When you create a production order, an operation created by the system is generated automatically if no routing is used for the creation. As a result the order header receives the status HOGAN; the operation created automatically also has this status.
If you delete the operation created automatically and then do not have the status HOGAN.
To avoid this maintain the Routing for the material or delete the setting of default operation from OPJG.
Regards,
R.Brahmankar

How to change the status of Serial number

Hi Experts,
Would you please help in solving this problem.
How to change the status of Serial number?
I have material stock in a storage location: recieved from Intercompany through outbound delivery, when PGIed material document is created when I am checking the serial numbers of the recieved ones status of the serial numbers are ESTO, I want that into AVLB.
How can we do that?
Regards
Sri

Hi,
Go to IQ02 on Header tool bar you will find edit(2nd option on header tool bar) => edit manually=> Click from Customer=> and then to Stock you will find the expected results...
Generally Serial number Status use to change along with the movement of material linked with that serial number... So if you are changing serial number with manual trasaction then please remove all the details from IQ02 like plant storage location Batch and master batch so that i will not provide you error while doing next transactions.
Regards,
Ninad Kshirsagar

How to change Contract Status to Release from Held

Hello SRM Guru,
We are on SRM 5.0. In our production system we have some contract (GOA) which were not automatically trasnferring to backend when we release it (After approval). They are in held status only so we transfer them by FM BBP_pd_CTR_Transfer. But in SRM still the GOA status is held. Could you please suggets how (any table) can I schange contract (GOA) status from held to release manully.
Thanks,

Hi
You can manually change the status of contract from held to released status using FM 'CRM_STATUS_UPDATE'. Enter your status parameters in structure JEST_INS and execute the FM.
Regards,
Sanjeev

How to Change the Default SSH Port from Terminal ?

How to Change the Default SSH Port from Terminal ?

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ? now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to Change the Default SSH Port from Terminal ?
now showing default SSH Port 22 i need change it pls help me how can do

How to change the Status CRTD of the Inspection Lot?

Dear all.
I want to Complete an Inspection Lot 10000000005 In the T-CODE qvm2.When I select the Inspection Lot 10000000005 and press F8 to Complete the Inspection,the SAP show an error message "Status check error".
And the detail info show that the error was cause by the Status CRTD of the Inspection Lot.I check the Status of the Inspection Lot 10000000005 and found that it's Status was CRTD CHCR SPRQ.My question was how to change the Status CRTD of the Inspection Lot?
Regard
Yoda

Hi
CRTD means ...
In material master QM vew-inspection setup->Inspect with task list tick is there.
Now to change status,
Go to Qp01>create a task list for material(If not exists)>remember date of creation of task list must be prior to date to creation of inspec lot
If task list is created/exists>go to QA02.<inspection specification -->click on Inspec Spec
and attach task list
go to sample tab....click on sample.
Now save it.
Status will change to REL
Regards
Sujit

How to change the status in the table kssk

Hi ,
In document management system - for a doc type pdf, I am maintaing the class (cl_xxx) in img setting. some charateristics are assigned to that class (with entry required).
My problem is While creating the document (cv01n). I am not assigning the value for that char ( i.e in addition data), eventhough it is mandatory .
In the table kssk , For that particular document , status is set to 5 . how to change the status .
note :
In cv04n - if i search wrt to that charateristic in the classification tab. i am not able to get the value.
Please help me to solv the problem.
Regards,
Rani.

hi you can do like this also if it is a test server..and y had the authoridation..
togo the table -supposekkkk-execute-select a particular record--double click it ---then it will display it in the vertical line..
then put /h in the tcode listbox and put enter--debugg it and change this if code = 'SHOW' as EDIT. execute it and change it and save it..
regards,
venkat.

How to change the status of updated record?

Hi All,
how to change the status of updated record?
new record should be active version(X) and old version will be deleted.
Plz suggest..
Thanks in advance...

Steve,
In the actual question, you mentioned that the old record needs to be deleted and hence the solution provided.
Now, you are talking about field. May I know which field are you talking about??
Jst get in to ABAP Editor and try debugging the code with the solution provided and let us know if that is working fine or not.
Also, I recommend you to take a look at the transaction ABAPDOCU. There you wil find hell lot of examples explaining all the scenarios. You will get a good idea .
Please check that and try to implement it yourself. You will be able to make it after doing mistakes.
If you stuck up again after many attempts, paste your code here. We will help you out
Hope you got my concern.
Thanks,
Babu Kilari

How to change the language of CS6 from Chinese to English?

Dear Sir / Madam,
How to change the language of CS6 from Chinese to English?
Please give me advice.
Many thanks,
Eddie

Language depends on what version of license you've bought. If you've bought a 'Chinese' license, you're stuck with 'Mandarin' or 'Cantonese' UI language.
If you purchased a Multi-lingual license (which I doubt they sell these days) and if you did install the 'optional language packs' when installing Photoshop, go to Photoshop Preferences (Edit > Preferences in Windows, Photoshop > Preferences in Mac) > Interface > UI Language - change here.
Also, keep in mind that if you do change the language with multi-language installation or change your locale, Photoshop may ask you to re-enter and re-activate your license.

How to change the status of clinical order header

Hi all,
I need to change the status (N1CORDER-WLSTA) of the clinical order header. I have found the way to change the status of the items and it works, but i dont know how to change the header status.
Now, for the items i do:
1- Create an object type cl_ishmed_prereg
2- Load the item (n1vkg-vkgid)
3- Use set_status method
4- Save the object
5- Commit work
So, do you know how i can change the status of the header? Im looking for other methods but...
Thanks,
Manel

In order to change the clinic order header status u have to:
1- Obtain the instance from item instance:
    CALL METHOD lv_prereg->get_corder
      IMPORTING
        er_corder = lv_corder
        e_rc      = rc.
2- Create a var type rn1_corder_x
3- Modify:
is_n1corder_x-wlsta = 'RE'. " new status
is_n1corder_x-wlsta_x = 'X'.
4- Use change mehod:
    CALL METHOD lv_corder->change
      EXPORTING
        is_corder_x     = is_n1corder_x
      IMPORTING
        e_rc            = rc
      CHANGING
        cr_errorhandler = cl_error.
5- Save:
CALL METHOD lv_corder->if_ish_objectbase~save
6- Commit work
Regards,
Manel

How to change the status of an incident, after it is "Confirmed"

Hi, I'm new to ITSM and the client asking me how he can change the status of an incident, after he change it to "Confirmed". Is there a way to change the status of an incident after it is set to "Confirmed"? Or can I change the configuration of the Status field to allow that change?
Thank you

hi
I dont think, you can reopen the confirmed ticket by standard, but please try with the report CRM_SOCM_SERVICE_REPORT.
if not try with the status profile customization, remove the FINI settings from the confrimed status also change the highest and low values also accordingly.
please try.
Thanks
Jansi

How to change the status of a process chain

Hi,
I went through Siegfried's blog and knew how to restart a process chain at a failed step which doesn't have "Repeat" option.
But is there any other function module through which we can change the "Actual State" of the process chain, in siggi's method we can change only the "i_state" of a particular process but not the "Actual State"(refer to RSPCPROCESSLOG table) of the process chain.
Please do give your suggestions if there is any way to change the "Actual State" of a process chain.
Regards

hey Vamshi,
We can directly change the status of the process chain.
there is a specific way to do it, you can go in se38 and change the status from one to another ...go to se38 .... type....rspcprocessmonitor*.........presss f4...
you will get a standard program ..
now go to this program ...and give the set of inputs .... like PID and all from RSPCPROCESSLOG table ..
and in the state give the state you want and press f8.
this should work.
Assign points if it answers your queries.
Thanks,
Dennis

How to changes the status of IDOCs from 18 to 06....

Similar Messages

Maybe you are looking for