How-To changing QuickTime setting by script

Hi There,
I'm a newbie of QuickTime, and I'm looking for a script that can change the QuickTime preferences on Windows.
If no script are already available it'll be nice even a link to documenation.
Thank you,
Stefano Lenzi
P.S.: If the answer is on a old thread please forgive me, I've searched but with no luck

Hi,
The following Adobe guide is very useful for scripting against objects:
http://partners.adobe.com/public/developer/en/tips/CalcScripts.pdf
For example, chaning the colour of the caption to red would be:
Text1.caption.font.fill.color.value = "255,0,0"
Good luck,
Niall

Similar Messages

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

How to change the Default login script and the USER login script in Netware3.12

I need to cut down the disk map from Neware 3.12 in Win98 client's PC.
please tell me
how to change the Default login script and the USER login script in
Netware3.12 ?
Or is there any other ways to do this thing?
Thanks a lot!

On 4/6/2006 [email protected] wrote:
> how to change the Default login script and the USER login script in
> Netware3.12 ?
Please repost in the discontinued.forums.
Edison Ortiz
Novell Product Support Forum SysOp
(No Email Support, Thanks !)

How to change language setting in NI DAQ mx software ?

Hello ,
We just purchased the NI DAQ mx , which is done by my colleage ..
so the software came in german even when I install ,it showed no any language selection option......
So pls hepl me put how to change language setting in the software.
Thanx
Bhavin

hello bhavin,
DAQmx uses the operating system language settings.
try to switch the language settings on your windows system to english, then DAQmx should also be english.
regards,
robert h
NI germany

How to change or set language in abap web

Hi Experts:
I use RSRT1 to run query by ABAP Web , how can I change or set the display language,
thanks

Hi Jeff,
Below links may helps you to solve the issue .....
http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/d7/c4673cffbb4c34e10000000a11402f/content.htm
Regards
Sudheer

RRMX opens a default report. How to change this setting ?????

Hi all,
If we type RRMX transaction code, it should go to BEx, but user has reported that whenever he types RRMX it opens a particular REPORT. How can we change this setting so that the default report will not be opened, PLEASE ? It seems it started after upgrading to BW 3.5.
Thanks.

Rian,
Thanks for your response. I have created a TEST User Id with the User Id that has the problem. I am not getting any default report with the TEST User Id when I type RRMX, just it goes to BEx (blank) only, but not to the report.
I have followed your navigation steps (Business Explorer Tab/Setting/ New Workbook on embed) with TEST User Id and 'is based on permanent template' is checked' under 'New Workbook on embed', but not 'is empty'.
I will go to the User's desk tomorrow and check the BEx settings on his PC.
Thanks.

How to Change Trackpad setting to ...

How can I set the trackpad in such a way such that when i click on lower right corner of it >>> i get the options that list (open in a new tab, open in a new window, etc) when using the browser
It gets really annoying when using the internet
I know i have to change the setting through system preferences ... but i don't know what to change it to
Kindly help me with my problem

Go into Expose & Spaces preferences (under the Personal category), click on the "Spaces" tab, and at the bottom of the window is the "Keyboard and Mouse Shortcuts" panel. The second drop-down menu for "to activate Spaces" will say "Secondary Mouse Button". (hence spaces being activated when you click the 'secondary mouse button' - bottom right corner of the trackpad) Change this menu to the "-" or "Middle Mouse Button" (since there is no middle mouse button on an  trackpad, this will do the same thing as the "-").
And have you tried the two-finger tap option. That's what I personally use the most.
Hope that helps!
~liam

Event Library-how to change date set at 2005 ?

Hi,
The as yet empty Event library shows 2005. (top left in FCP X) I can't figure out on how to change that. I assume it's a date ?
thank you

Hi Ram,
We will load delta Intial with data transfer every weekend , and we run delta everyday , because we do delta init with data transfer with selections say ( 01.20011 to 12.2003 ) every weekend , hope I need to create new delta infopack with new data selections say ( 01.2004 to 12.9999) only to get update data in Infocube.
Please correct me if I am wrong .
Regards
hari

How to change character set to arabic in Develper suite forms 10g

Dear all,
Our company wants migrate oracle forms 4.5/6i applications to Oracle developer suite 10g version.
They also want there database to upgrade from 9i to 10g.
They gave me test machine, on which windows xp is installed and i did the following:-
1,Installed Oracle 10g Xe edition database.
2,Installed Oracle 10g Devloper suite(oracle forms, Oracle reports).
3, Configured the connection of Oracle Developer suite 10g to Oracle Database 10g.
4, Loaded Data into the 10g database. *( they are few columns like DEPARTMENT_NAME_ARB, FUNCTION_NAME_ARB which is supposed to show in arabic fonts, as it is in arabic in 9i database, now they are showing in some special characters)*
What I would like to know is: Is there a way through which i can set characterset?
Is it in the database in which i have to make character set change?
Is it in the oracle developer suite application in which i have to make character set change?
Is it in the registry in which i have to make changes?
please help.

Hi freinds,
It is very encouraging to see your replies, i apologize for the late reponse, i still got no success with updating PROPS$,
I relgiously followed all the instructions given to me by all of you. Like u could see in my previous posts
Luckiily, i am able to insert one row at a time manaually iin arabic and in english by pressing (ALT+SHIFT).
When i create datablocks in forms builder, i do see output in arabic.
When i create report in group style i do see ouptput in arabic.
i have thousands of rows(in GB's) which needs to be inserted in this new database 10g XE edition (downloaded from oracle)
I have attempted multiple times insertion of data by just running script, or simply copying numerous insert statement rows from notepad to sql*plus, unluckily it alwayz retreived the special charachters rather than retreiving arabic characters.
Is there a way to insert data in this new oracle 10g xe editon database via oracle developer suite 10g forms/reports?
Do I have to use inbuilt data load/unload utilities in oracle 10g xe edition?
Do I have to install sql*loader separately to load the data?
Do you think TOAD can help in this?
Could you please tell me how to add snap shots in this post?(user10947262)
Here are the following details of National Language Parameter Value
Before
NLS_CALENDAR     GREGORIAN
NLS_CHARACTERSET     AL32UTF8 (IS this multibyte (UTF-8) character set SARAH?)
NLS_COMP     BINARY
NLS_CURRENCY     $
NLS_DATE_FORMAT     DD-MON-RR
NLS_DATE_LANGUAGE     AMERICAN
NLS_DUAL_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_LANGUAGE     AMERICAN
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_NCHAR_CONV_EXCP     FALSE
NLS_NUMERIC_CHARACTERS     .,
NLS_SORT     BINARY
NLS_TERRITORY     AMERICA
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
After
NLS_CALENDAR     GREGORIAN
NLS_CHARACTERSET     AL32UTF8
NLS_COMP     BINARY
NLS_CURRENCY     ر.س.
NLS_DATE_FORMAT     DD/MM/RR
NLS_DATE_LANGUAGE     ARABIC
NLS_DUAL_CURRENCY     ر.س.
NLS_ISO_CURRENCY     SAUDI ARABIA
NLS_LANGUAGE     ARABIC
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_NCHAR_CONV_EXCP     FALSE
NLS_NUMERIC_CHARACTERS     .,
NLS_SORT     ARABIC
NLS_TERRITORY     SAUDI ARABIA
NLS_TIME_FORMAT     HH12:MI:SSXFF PM
NLS_TIMESTAMP_FORMAT     DD/MM/RR HH12:MI:SSXFF PM
NLS_TIMESTAMP_TZ_FORMAT     DD/MM/RR HH12:MI:SSXFF PM TZR
NLS_TIME_TZ_FORMAT     HH12:MI:SSXFF PM TZR
Certainly Christian, i dont want to screw my oracle 10g database xe edition software and installation, and i agree and hope with this that creating new database and doing exporting and importing will work for me. (XE edition doesnt give option to create new database, i need to install 10g release2 media pack from edelivery)
However, with the above informatiion provided, Is it really needed?
Please help me.
Thanks and Regards

How to change character set

hi my database character set is non-AL32UTF8 HOW can i change this to be AL32UTF8 am in database 11g
SQL> select * from v$nls_parameters where parameter like '%CHARACTERSET%';
PARAMETER
VALUE
NLS_CHARACTERSET
WE8MSWIN1252
NLS_NCHAR_CHARACTERSET
AL16UTF16
there is something in database i cannot drop database

i did this
SQL> @C:\app\Tshifhiwa\product\11.2.0\dbhome_1\RDBMS\ADMIN\csalter.plb
insert into csm$dictusers
ERROR at line 1:
ORA-00942: table or view does not exist
Function created.
Warning: Function created with compilation errors.
Warning: Procedure created with compilation errors.
This script will update the content of the Oracle Data Dictionary.
Please ensure you have a full backup before initiating this procedure.
Would you like to proceed (Y/N)?y
old   6:     if (UPPER('&conf') <> 'Y') then
new   6:     if (UPPER('y') <> 'Y') then
    csm$main();
ERROR at line 10:
ORA-06550: line 10, column 5:
PLS-00905: object SYS.CSM$MAIN is invalid
ORA-06550: line 10, column 5:
PL/SQL: Statement ignored
    select value into svalue from csm$parameters where name='CSALTER_FINISHED';
ERROR at line 9:
ORA-06550: line 9, column 35:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 9, column 5:
PL/SQL: SQL Statement ignored
ORA-06550: line 18, column 35:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 18, column 5:
PL/SQL: SQL Statement ignored
ORA-06550: line 21, column 38:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 21, column 8:
PL/SQL: SQL Statement ignored
ORA-06550: line 27, column 35:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 27, column 5:
PL/SQL: SQL Statement ignored
ORA-06550: line 30, column 38:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 30, column 8:
PL/SQL: SQL Statement ignored
delete from csm$dictusers where username in ('PM', 'SH', 'HR', 'OE')
ERROR at line 1:
ORA-00942: table or view does not exist
Function dropped.
Function dropped.
Procedure dropped.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> ALTER SYSTEM ENABLE RESTRICTED SESSION;
ALTER SYSTEM ENABLE RESTRICTED SESSION
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 4360
Session ID: 139 Serial number: 6
SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0;
ERROR:
ORA-01034: ORACLE not available
Process ID: 4360
Session ID: 139 Serial number: 6
ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 4360
Session ID: 139 Serial number: 6
SQL> ALTER SYSTEM SET AQ_TM_PROCESSES=0;
ERROR:
ORA-01034: ORACLE not available
Process ID: 4360
Session ID: 139 Serial number: 6
ALTER SYSTEM SET AQ_TM_PROCESSES=0
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 4360
Session ID: 139 Serial number: 6
SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0;
ERROR:
ORA-01034: ORACLE not available
Process ID: 4360
Session ID: 139 Serial number: 6
ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0
ERROR at line 1:
ORA-01034: ORACLE not available
Process ID: 4360
Session ID: 139 Serial number: 6
SQL> connect /as sysdba
Connected to an idle instance.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 535662592 bytes
Fixed Size                  1375792 bytes
Variable Size             373293520 bytes
Database Buffers          155189248 bytes
Redo Buffers                5804032 bytes
Database mounted.
SQL> ALTER SYSTEM ENABLE RESTRICTED SESSION;
System altered.
SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES=0;
System altered.
SQL> ALTER SYSTEM SET AQ_TM_PROCESSES=0;
System altered.
SQL> ALTER DATABASE OPEN;
Database altered.
SQL> ALTER DATABASE CHARACTER SET 'AL32UTF8';
ALTER DATABASE CHARACTER SET 'AL32UTF8'
ERROR at line 1:
ORA-24329: invalid character set identifier
SQL> ALTER DATABASE CHARACTER SET AL32UTF8;
ALTER DATABASE CHARACTER SET AL32UTF8
ERROR at line 1:
ORA-12712: new character set must be a superset of old character set
SQL> select * from v$nls_parameters where parameter like '%CHARACTERSET%';
PARAMETER
VALUE
NLS_CHARACTERSET
WE8MSWIN1252
NLS_NCHAR_CHARACTERSET

How to change a parameter with script

Hi to All,
Is it possible change to TRUE the Parameter "07_DICTIONARY_ACCESSIBILITY" with a script ?
If Yes, how can perform this ?
Thank You and Best Regards.
Gaetano

About 07_DICTIONARY_ACCESSIBILITY

How to change layout set in KM room part...

Hi,
My company is currently using EP6 SP15 and is in the process of trialing the use of Collaboration room.
One of the feedback from our users is that they do not like the layout of the KM document room part. What they would like to use is the "Tree list Preview Explorer" layout. Can someone point me to any documentation on how this could be done?
Thanks,
Thomas Siu

Hi Thomas,
It is easy to do this for a single room to experiment
before changing the iView settings for the template which would affect new rooms. You can go into the Details for the root folder of your room part and call up the "Presentation Settings". Then choose the "ConsumerTreeListPreview" as the Layout set.
In my rooms I typically add a set of extra links in the Room Links iView (perhaps restricted to the admins) that provide an Admin Explorer view and a WebDAV link. These look something like this:
https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.navigation/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX?rndLayoutSet=AdminExplorer
javascript:document.write('<div id=mydiv><a href=https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/ folder=https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX>Click here if page fails to redirect.<\/a><\/div>');mydiv.addBehavior('\x23default\x23httpFolder');mydiv.navigateFrame('https://myportal/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/room_extensions/cm_stores/documents/workspaces/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX','_self');
Obviously, you need to change "myportal" to your portal name/domain and "XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX" to your room store GUID. These links make maintaining room content easier.
I also typically make the top folder a bit prettier by using a taxonomy-like view with a grid of big folder icons with be links.
Regards,
Darin

How to change character set to Unicode

Where can I get my current character set encoding value.
How do I change my encoding to Unicode.
What is the procedure.
Thnx in advance.
Ameya,

If you have not done so already, I suggest reading the Globalization Support guide. This document explains topics like Choosing a character set and Character Set Migration.
Also visit the Globalization Support, where these types of questions really belong.

How to change Quicktime Movie size in Lion Server Wiki?

I am setting up a Wiki Server for our iPad deployment and want to embed several videos in the Wiki. I have exported them out of iMovie via QuickTime for use in the wiki. I have uploaded them -- and they work but they are TINY! You can't see what it being demonstrated! No matter what size I export them out to - they still display the same size...
Is there any way to edit the size of the way the video displays?

Have they came out with a patch to adjust system wide font sizes?
Not to my knowledge. One way of changing the size of the text is to alter the resolution. Admittedly it's a less than perfect solution but many on here seem to manage with it.
System Preferences>Displays - click on Scaled and select another resolution.

How to change desktop setting on a Mac?

When attempting to download latest version of Firefox, a window pops up to say I need to change the desktop setting. I don't know how to do this. Thanks

You can change your password by restarting and holding the Command and R keys so you restart on the Recovery Hard Drive. Then select the Utilities drop down from the menu bar, and Terminal. When Terminal opens, type exactly:
resetpassword
and press Enter.
When the Reset Password window opens, select the hard drive, highlight the user name, and type a new password twice. Do not enter a Hint. Select Save, and accept the next window that opens. At the bottom of the Reset Password window, Reset the home directory permissions, quit the Reset Password, and click the apple left side of the menu bar and Restart.

How-To changing QuickTime setting by script

Similar Messages

Maybe you are looking for