How to check Forms module QUERY_ONLY ???

Hi,
it is possible to check the state of the Foms module :
QUERY_ONLY | NO_QUERY_ONLY inside (e.g. in the PRE-FORM-T)
to set | reset module functions ?
Thanks
Friedhold

It is a hidden property.
You can simulate the state with
TOOLS | PREFENRCES | Rider Runtime | Query_only_mode = YES
and if you try to Insert in a db-block item you get:
FRM-40208: Forms running in query-only mode. Cannot change database fields -
is this error the only check event ?
Thanks
Friedhold

Similar Messages

  • How I check form server version oracle

    Hi .
    I am need to install Report biulder on my pc and i do not know how to check the version of form server .
    Can enyone help please.
    Thanks.

    Hi
    am afraid 2 tell u this is not the appropriate form but, Pls see the following link
    http://onlineappsdba.com/index.php/2008/08/17/oracle-releaseversion-number-for-apps-forms-jinitiator-oid-sso-portal-ias-oc4j-unix-xxxx/
    http://easyoracleapps.wordpress.com/2010/03/12/find-component-version-in-oracle-apps/
    u need Apps forum
    Regards,
    Abdetu...

  • How to check form

    In PO, How can i check which form are called when print preview. Thanks

    Hi,
    1. Before click on printing button start debug -> Put break point on Function module from menu -> write OPEN_FORM. Cursor will set and then execute.
    It would stop at break point check the name.
    2. From TNAPR table you can check by giving name
    3. NACE transaction, give approproiate Application area.
    Reward if useful!

  • How to check DSP modules installed status

    Dear All,
    How will I check up the DSP modules installed status in cisco 7206 router.
    How can i know whether those DSP modules are installed with
    2 Channelized E1/PRI port(s) or in the chasis itself.
    Thanks
    Shibu

    Dear Nick,
    Please find the sh voice DSP.
    -HQ#sh voice dsp
    DSP DSP DSPWARE CURR BOOT PAK TX/RX
    TYPE NUM CH CODEC VERSION STATE STATE RST AI VOICEPORT TS ABORT PACK COUNT
    ==== === == ======== ======= ===== ======= === == ========= == ===== ============
    C549 010 01 g729r8 4.1.41 busy idle 0 0 1/1:15 30 0 6823409/5935
    157

  • How to check if function module exist

    Hi All!
    Does anyone know how to check if function module, which name is provided by the user, exists?
    I have to execute a function but when user provides a incrrect name - i receive a short dump. I would like to chceck if this function exists before execution and if not - warn user with message box.
    Thanks
    Tomek

    REPORT z_tmtest MESSAGE-ID zz.
    PARAMETER: a_fname  LIKE tfdir-funcname.
    PERFORM test_fun_exist USING a_fname.
          FORM test_fun_exist                                           *
    Test FM Exists
    FORM test_fun_exist USING f_funcname  LIKE tfdir-funcname.
      CALL FUNCTION 'OM_FUNC_MODULE_EXIST'
           EXPORTING
                function_module = f_funcname
           EXCEPTIONS
                not_existent    = 1
                OTHERS          = 2.
      IF sy-subrc <> 0.
        MESSAGE e001.
      ENDIF.
    ENDFORM.

  • How to check for a function module with its description and functionality

    Hi all,
    How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

    Hi,
    You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
    Say for example you need to search something regarding converstion.
    Search for * CONVERT * and press F4.
    If there is something specfic like converting date to something you can give
    DATE * CONVERT *
    OR
    CONVERT * DATE *  and press F4.
    Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
    Regards,
    Pramod

  • How do I "see" a check function module in the debugger?

    I am correctly starting a custom workflow based on an event raised by standard SAP code in transaciton QE51N.
    I have to write a check function module to interrogate the event and start/not start
    the workflow because the same event is raised by SAP code in transaction QA02, and I have to be sure to start the workflow only if the event is raised in QE51N, not QA02.  (I also have to check some other properties of the QALS row for the inspection lot.)
    I know how to code the check function module, but if I need to debug it, how do I "set-up" for seeing the check function module in the debugger?
    I'm sure this is an obvious question and that I'm missing something simple.
    So thanks in advance for the answer.
    djh

    Dear DJH,
    Put a break-point in the function module and process the transaction. It will stop at runtime.
    Hope this will help.
    Regards,
    Naveen.

  • How to Check the report is Finished while calling a report from Forms 6i

    Dear All,
    I am Calling a report from oracle forms 6i, after runing report in " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"
    I need to copy the pdf to store it in another place once the report is generated.
    My Problem is : that i want ot Check first the report has generated after " Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);" is executed ? How to check the report is generated ot not?
    As i tried to use the below procedure after "Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);"" but his does not work... nothing happens
    {code}
    PROCEDURE FPC_COPY_REPORT (p_report_name varchar2) IS
         repid REPORT_OBJECT;
         v_rep VARCHAR2(100);
         rep_status varchar2(20);
         lv_id varchar2(1000);
    BEGIN
    repid := find_report_object('AMTP_995.RDF');
    v_rep := RUN_REPORT_OBJECT(repid);
    rep_status := REPORT_OBJECT_STATUS(v_rep);
         if rep_status = 'FINISHED' then
         message('Report Completed'); message('Report Completed');
         else
              message('Error when running report.');           message('Error when running report.');
         end if;
    END;
    {code}
    Any Help

    actually My code is this:
    declare
         ln_alert          number;
         pl_id               ParamList;
         lv_report_name varchar2(10000);
         lv_path  varchar2 (100) := 'C:\';
         lv_shared_path  varchar2(1000);
         lv_copy_file varchar2(10000);
      cursor cr_dir_path IS
      select v_dir_path
      from md_directory
      where v_dir_code ='SHR';
      lv_file_name varchar2(1000);
    BEGIN
      open cr_dir_path;
      fetch cr_dir_path into lv_shared_path;
      close cr_dir_path;
    lv_report_name :=  lv_path||:fn_cntl.nb_ref_no||'_M08600000_'||to_char(sysdate,'YYYYMMDD-HHmmss')||'.pdf';
      if ffn_check_fields  THEN
         pl_id := Get_Parameter_List('LAI');
             IF NOT Id_Null(pl_id) THEN
                 Destroy_Parameter_List( pl_id );
              END IF;             
              pl_id := Create_Parameter_List('LAI');
           if :fn_cntl.nb_report_name ='MMAT_REPORT'
                then
                     if :fn_cntl.nb_report_desc ='EXPORT'
                          then
                         Add_Parameter(pl_id, 'PARAMFORM',TEXT_PARAMETER, 'NO');
             Add_Parameter(pl_id, 'DESTYPE',  TEXT_PARAMETER,'File');
            Add_Parameter(pl_id, 'DESNAME',  TEXT_PARAMETER, lv_report_name);
            Add_Parameter(pl_id, 'DESFORMAT',TEXT_PARAMETER,'PDF');
            Add_Parameter(pl_id, 'p_mat_no',TEXT_PARAMETER, :fn_cntl.nb_mat_no);   
            Add_Parameter(pl_id, 'p_ref_no',     TEXT_PARAMETER, :fn_cntl.nb_ref_no);
            Add_Parameter(pl_id, 'p_verified_by',TEXT_PARAMETER, user);
                     Run_Product(REPORTS,:fn_cntl.nb_report_name,ASYNCHRONOUS, RUNTIME, FILESYSTEM,pl_id, NULL);
          DECLARE     
               repid REPORT_OBJECT;     v_rep VARCHAR2(100);     rep_status varchar2(20);BEGIN
                         /* REP_OBJ= REPORT OBJECT CREATED UNDER REPORT NODE AT FORM */
             repid := find_report_object('MMAT_REPORT');      v_rep := RUN_REPORT_OBJECT(repid);
                        rep_status := REPORT_OBJECT_STATUS(v_rep);          
          if rep_status = 'FINISHED' then
              message('Report Completed');          message('Report Completed');
             --copy_report_object_output(v_rep,'c:\local.pdf');
             -- host('netscape c:\tlocal.pdf');     
         else          message('Error when running report.');
                                          message('Error when running report.');     
         end if;
                 END;
         end if;
      end if;
           if :fn_cntl.nb_report_desc ='EXPORT'
                then
                  error_handler('This report will be Storde in ' ||lv_report_name||' and '||lv_shared_path|| ' Location',3);
                     lv_copy_file :='copy '||' "'||lv_report_name||'" "'||lv_shared_path||'"';
                     host(lv_copy_file,no_screen);
                  error_handler('Report Has been Generated Sucessfully.',3);
           end if;
        end if;
    END;I will try first the another solution you have replied perviously... and will let you no the results... thanks a lot...

  • How to check the form name in S_P00_07000134

    hi all,
    could you please tell me how to check the form name when get the print preview using T-code S_P00_07000134. i tried to active SE71, but when executing S_P00_07000134, click on print preview, it doesn't go to debugging.
    please help me with the issue, thanks a lot.
    regards,
    eric

    Have you looked in the IMG menu path: Financial Accounting > Financial Accounting Global Settings > Withholding Tax > (either Withholding Tax or Extended Withholding Tax) > Generic Withholding Tax Reporting > Define Output Groups.
    View the output group used in the S_P00_07000134 selection screen.  In the Printouts section, Printout 1 and Printout 2 have smart forms identified, either Smart Form or PDF form types.

  • How to check a checkbox field value in fw9 PDF form

    Hi,
    I got a PDF given form IRS (http://www.irs.gov/pub/irs-pdf/fw9.pdf). While creating a widget to this pdf form to sign it, I merged the custum data to those PDF form fields using API setMergeFields.
    All the data fields are merged fine except the checkboxes. I tried by passing the values to the merge_fields array as 'On', '1', 'checked', 'checkbox(checked)' but no luck
    What is wrong here in checking the chexbox field in this fw9 PDF or How to check a checkbox field in a form?
    Thank you,

    Hi Simon,
    I re-added and edited the fields of fw9 form by pdf printer. While doing so, I made fields as ready only so that, the data cannot be edited in the form through the widget but will be merged the data to fields only be the code. Wherein Im using the widget only for signature but not for form filling.
    Here, Im able to merge my custom data to all fields while creating widget but not to the fields of checkboxes. The checkboxes fields which are made ready-only are not allowing me to merge the value as checked by the API.
    Please help me,
    Thanks you,

  • How to check an alert or LOV is displayed at Forms

    Is there any other way , shall we identify  any alert/Message/LOV is opened ?
    Please advise on this.

    My scenario is given below :
    I have implemented the Timeout PJC (Using Bean) in my application. I have set the idle time as 30 minutes.If the Form is idle for more than 30 minutes , as per our timeout PJC logic, we have closed all the forms.
    But if the user opens LOV/Messages/Alert messages , The timeout logic is waiting for user acknowledgement .We are fine with the user acknowledgement. But once the user has acknowledged , we need to reset the Timer. But currently as soon as the user gives confirmation on the alert messages , the system expires.
    Please suggest how to check on this case.

  • How to check module abbreviations and whether they are installed or not ?

    Hi All -
    There was a question raised , that is self service parts planning module available/installed/registered in our current EBS or not ? How to check whether self service parts planning module is installed or available or not ?
    Also i would like to check all the modules which are currently installed and can be used ?
    Regards,

    Our question says , we do not know the code for Self Service Parts Planning Module . How to check particularly these product is installed or not ?
    from the link given , it describes that for self service parts planning code is "SPP" . Can you please confirm ?It is part of "Advanced Supply Chain Planning (ASCP)", so run the query in (How to Find Out Product Installation Information in Oracle Applications? [ID 1275690.1]) and pass the module name.
    Similary can we get the product codes for all shared products, installed products and non-installed products. The doc referenced above in this reply will list all the module names, with the product codes and the status.
    What does shared products actually mean ?Patching Shared Oracle E-Business Suite Products [ID 1069099.1]
    Thanks,
    Hussein

  • How to use Check Function Module???

    Hi Friends,
    How to use Check Function Module in Workflow???
    My requirement is to trigger the workflow at the last line item of the Material Document.
    Rewards for sure for helpful answer.
    -Satish

    Hi Satish,
    You know, the real power of forums like these is the search functionality. First you locate the correct forum, you succeeded in that and then you locate the search field and type in your question. In your case "check function module"
    I suggest you do this right away and be amazed at all of the answers about his topic. Maybe you'll even find some topic about exactly the same issue with a different solution than check function modules and on top of that you learn something this way. Talk about win-win situation
    Kind regards, Rob Dielemans

  • How to check old value in form personalization.

    Hi All,
    Could anybody please tell me how to check the old value in oracle forms using form personalization if someone is updating to someother value.
    For example.
    My Vendor Site Alternate name is XYZ
    and someone has changed it to ABC, How could i check the old values before or after doing updates.
    I don't want to write trigger for this.
    Thanks & Regards,
    Vishwas

    Pl see if the solution in this thread can help - Re: Capture who changed data using Forms Personalization & changed to what
    If not, pl see old threads that discuss forms personalization
    http://forums.oracle.com/forums/search.jspa?threadID=&q=forms+AND+personalization&objID=c3&dateRange=last90days&userID=&numResults=15
    HTH
    Srini

  • How to check table is NULL or not when a form load?

    How to check table is NULL or not when a form load?
    I want to make the form when it load it check the data in table, if there are no data in table other form will be load.
    Sorry for bad English... 

    Maybe you can do this in form1's Form_Open event:
    if dcount("*", "table1") = 0 then
      Cancel = True
      Docmd.Openform "form2"
    end if
    -Tom. Microsoft Access MVP

Maybe you are looking for