How to check if a Handling Unit is Back FLushed or not?

Hello all,
How can we check if the Handling Unit is BackFlushed or not?
Either Tcode or DB table will do....
Thanks in advance
Edited by: Mr A on May 23, 2008 3:47 PM

There are so many things wrong with your code, it's hard to know where to start...
Basically, the problem is not as simple as you think it is.
For example, some servers might not allow authentication until you've issued
the STARTTLS command.
These days, essentially all servers allow authentication. You're probably better
off just assuming the server supports.

Similar Messages

How to re-use of handling unit number (SSCC)?

Dear,
We are implementing handling unit management to our customer and HU number is SSCC code. The inbound process intended to use is as follows:
1. Create purchase order with confirmation control key 0004 (shipping notification) and receiving storage location is a HU-managed storage location.
2. Create inbound delivery against the purchaser order via VL31N.
3. Pack HU in the inbound delivery and then post goods receipt.
Further, our customer is using fix SSCC on each pallet physically, so we will maintain external HU number range in SAP accordingly, but the issue is, how to re-use of the SSCC in the inbound process? Currently, once the HU (SSCC) is received in SAP, the system status will be PHEX and WHSE, then next time when the pallet is empty physically, we still cannot re-use of the HU (SSCC) in the inbound delivery for GR process in SAP.
Can anyone of you give me some suggestions how to re-use of handling unit (SSCC) in SAP?
Thanks in advance.
Br,
Jason

Hi Jason
As far as I know it cannot be done in any standard way. The only way is to reset the status of the HU using program ie make changes at Table level VEKP-HU_STATUS.
or during the final issue of the SSCC from the system looks for BADI/Exit to achieve the same or do it through batch program to reset the status
Regards
Jayaram

How to verify whether the persistence unit objects are persistent or not?

How to verify whether the persistence unit objects are persistent or not?
I have successfully configure and deploy the Employees object as a persistence unit in Oracle Coherence according to the guide of Chapter 6 of Tutorial for Oracle Coherence 3.5.
Using the RunEmployeeExample script, I have got the right results. I can see that after the cache object is updated, the database table (Employees) is also updated accordingly. The following is the output:
2009-11-05 11:09:55.043/53.467 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:09:54.867, Add
ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) joined Cluster with senior member 1
2009-11-05 11:09:55.604/54.028 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior memb
er 1
2009-11-05 11:09:56.885/55.309 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{Sta
te=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4084]}
2009-11-05 11:09:57.847/56.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service JpaDistributedCache with se
nior member 1
2009-11-05 11:09:57.917/56.341 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Service JpaDistributed
Cache: sending ServiceConfigSync containing 258 entries to Member 2
2009-11-05 11:10:04.086/62.510 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Deferring the distribu
tion due to 1 pending configuration updates
[EL Info]: 2009-11-05 11:10:14.36--ServerSession(2883071)--EclipseLink, version: Eclipse Persistence Services - 1.1.1.v20090430-r4097
[EL Info]: 2009-11-05 11:10:22.312--ServerSession(2883071)--file:/C:/JDeveloper/mywork/AppJPA/JPA/classes/-JPA login successful
2009-11-05 11:10:24.305/82.729 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): 3> Transferring 128 ou
t of 257 primary partitions to member 2 requesting 128
2009-11-05 11:10:25.697/84.121 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 1> Transferring 129 ou
t of 129 partitions to a node-safe backup 1 at member 2 (under 129)
2009-11-05 11:10:25.857/84.281 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache:JpaDistributedCache, member=1): Transferring 0KB of ba
ckup[1] for PartitionSet{128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151,
152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180,
181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209,
210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238,
239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256} to member 2
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: disconnected from member 2 due to a kill r
equest
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service Management with senior member
1
2009-11-05 11:10:40.678/99.102 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 left service JpaDistributedCache with seni
or member 1
2009-11-05 11:10:40.708/99.132 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:10:40.708, Add
ress=192.168.8.80:8089, MachineId=24656, Location=process:1684, Role=OracleRunEmployeeExample) left Cluster with senior member 1
2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <Info> (thread=DistributedCache:JpaDistributedCache, member=1): Restored from backup
128 partitions
2009-11-05 11:10:40.879/99.303 Oracle Coherence GE 3.5.2/463 <D4> (thread=DistributedCache:JpaDistributedCache, member=1): 0, 1, 2, 3, 4, 5, 6, 7
, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 4
4, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80
, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 11
3, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
2009-11-05 11:28:39.800/1178.224 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member(Id=2, Timestamp=2009-11-05 11:28:39.635, A
ddress=192.168.8.80:8089, MachineId=24656, Location=site:metsys.metex.com,machine:mw12,process:1752, Role=CoherenceConsole) joined Cluster with s
enior member 1
2009-11-05 11:28:40.231/1178.655 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service Management with senior me
mber 1
2009-11-05 11:28:41.633/1180.057 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): TcpRing: connecting to member 2 using TcpSocket{S
tate=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=8089,localport=4143]}
2009-11-05 11:30:01.658/1260.082 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=1): Member 2 joined Service DistributedCache with sen
ior member 2But I cannot verify if the persistence unit is still persistent.
Edited by: jetq on Nov 5, 2009 11:49 AM

I start a Coherence Console in another Windows Command Prompt as the following:
D:\coherence\bin> coherence.cmd
** Starting storage disabled console **
java version "1.6.0_11"
Oracle Coherence Version 3.5.2/463
Grid Edition: Development mode
Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
2009-11-05 11:57:22.167/9.734 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Service Cluster joined th
e cluster with senior service member n/a
2009-11-05 11:57:22.197/9.764 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Failed to satisfy the v
ariance: allowed=16, actual=20
2009-11-05 11:57:22.197/9.764 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): Increasing allowable va
riance to 17
2009-11-05 11:57:22.677/10.244 Oracle Coherence GE 3.5.2/463 <Info> (thread=Cluster, member=n/a): This Member(Id=3, Time
stamp=2009-11-05 11:57:22.392, Address=192.168.8.80:8089, MachineId=24656, Location=process:460, Role=CoherenceConsole,
Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1) joined cluster "cluster:0xD3FB" with senior Member(Id
=1, Timestamp=2009-11-05 11:09:09.738, Address=192.168.8.80:8088, MachineId=24656, Location=process:1816, Role=Coherence
Server, Edition=Grid Edition, Mode=Development, CpuCount=1, SocketCount=1)
2009-11-05 11:57:22.737/10.304 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
Management with senior member 1
2009-11-05 11:57:22.737/10.304 Oracle Coherence GE 3.5.2/463 <D5> (thread=Cluster, member=n/a): Member 1 joined Service
JpaDistributedCache with senior member 1
2009-11-05 11:57:23.108/10.675 Oracle Coherence GE 3.5.2/463 <D5> (thread=Invocation:Management, member=3): Service Mana
gement joined the cluster with senior service member 1
2009-11-05 11:57:23.759/11.326 Oracle Coherence GE 3.5.2/463 <D5> (thread=TcpRingListener, member=3): TcpRing: connectin
g to member 1 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/192.168.8.80,port=4168,localport=8089]}
SafeCluster: Name=cluster:0xD3FB
Group{Address=224.3.5.2, Port=35463, TTL=4}The previous output shows that this Coherence console (the client side) has already joined the JPA server.
But the following output shows us that this console cannot access the Employees cache and cannot get the object entry. Why?
Map (?): cache Employees
2009-11-05 12:11:41.653/869.220 Oracle Coherence GE 3.5.2/463 <Info> (thread=main, member=3): Loaded cache configuration
from "jar:file:/D:/coherence/lib/coherence.jar!/coherence-cache-config.xml"
2009-11-05 12:11:43.055/870.622 Oracle Coherence GE 3.5.2/463 <D5> (thread=DistributedCache, member=3): Service Distribu
tedCache joined the cluster with senior service member 3
<distributed-scheme>

<scheme-name>example-distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
    <local-scheme>
      <scheme-ref>example-binary-backing-map</scheme-ref>
    </local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
Map (Employees): list
2009-11-05 12:11:48.402/875.969 Oracle Coherence GE 3.5.2/463 <Error> (thread=main, member=3):
java.lang.RuntimeException: Storage is not configured
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissing
Storage(DistributedCache.CDB:9)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureReq
uestTarget(DistributedCache.CDB:33)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendParti
tionedRequest(DistributedCache.CDB:31)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.size(Dist
ributedCache.CDB:13)
        at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap$EntrySet.
size(DistributedCache.CDB:1)
        at com.tangosol.util.ConverterCollections$ConverterEntrySet.size(ConverterCollections.java:2720)
        at com.tangosol.coherence.component.application.console.Coherence.doList(Coherence.CDB:74)
        at com.tangosol.coherence.component.application.console.Coherence.processCommand(Coherence.CDB:442)
        at com.tangosol.coherence.component.application.console.Coherence.run(Coherence.CDB:39)
        at com.tangosol.coherence.component.application.console.Coherence.main(Coherence.CDB:3)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.tangosol.net.CacheFactory.main(CacheFactory.java:1400)Edited by: jetq on Nov 5, 2009 12:18 PM

How to check whether a Document in KM is classified or not using JAVA API

Hello Everyone,
Can anyone tell me, How to check whether a Document in KM is classified or not, using JAVA API's??
Thanks & Regards,
Adren D'Souza

Hi,
The code is as follows:
IIndexService indexService = null;
try {
   indexService = (IIndexService) ResourceFactory.getInstance().getServiceFactory().getService(IServiceTypesConst.INDEX_SERVICE);
} catch (ResourceException e) {
   if (indexService == null) {
     log.errorT("Error on instanciating the index service");
     return this.renderMessage(this.getBundleString(RES_NO_INDEX_SERVICE), StatusType.ERROR);
// get index
IIndex index = null;
try {
   index = indexService.getIndex("YourIndexID");
} catch (WcmException e1) {
   log.errorT("Error when trying to get the index");
   return this.renderMessage(this.getBundleString(RES_NO_INDEX), StatusType.ERROR);
// check if the index is a instance of AbstractClassificationIndex
AbstractClassificationIndex classiIndex = null;
if (index instanceof AbstractClassificationIndex) {
   classiIndex = (AbstractClassificationIndex) index;
} else {
   log.errorT("The index " + index.getIndexName() + " is no classification index");
   return this.renderMessage(this.getBundleString(RES_NO_CLASSIFICATION_INDEX), StatusType.WARNING);
//give your KM Resource here for which you want to know if it is classified or not
boolean classified = classiIndex.isDocClassifiedInAnyTax(resource);
Regards,
Praveen Gudapati

How to check whether my iphone 5 is factory unlocked or not??

how to check whether my iphone 5 is factory unlocked or not??

Did you buy it unlocked at full, non-subsidised price? If not, then it's not unlocked.

How to check Capacity in area unit ?

Hi Gurus...
I have created Resources with Warehouse+proc. unit. The capacity of the same iis to be checked in area Unit i.e sq.mtr.
I have accordingly maintained the Parameter, Formulas , for the Resource. The Capacity Category I have used is Warehouse+proc. Unit .
As an Eg -One resource that I have created is GREENHS is the resource in sandbox system for XXXX Plant.
Now whenever I try checking the capacity (Capacity Evaluation u2013 CM50/CM52), the values displayed are in Days (time unit). I want to check this values as sq mtr. (area unit).
Also it is not taking any capacity requirements in picture i.e always the Available capacity and required capacity are same, and it is not booking any capacity for the Process Orders created.
Can you please guide me as to where am I making mistake, or I have maintained some wrong settings.
Thanks and regards,
A S K

Hi
1. To display capacity in different unit of measure, In CM50 Menu bar use the path( Settings> Value Display>Covert Unit).
2. If the required capacity is not getting loaded in the Resource, Please check in the Capacity details whether you have mentioned the Parameters (Relevant for finite scheduling , Normal available capacity & Factory Calendar)
Regards
Bala

How to check whether a char string is in uppercase or not

Hi,
I know how to convert strings to change strings to uppercase or lowercase, but is there any function to check, beforehand, if the field is in uppercase, for instance ? The intention here is simply to spare processing in situations where the string is already in uppercase, and thus not needing any further processing (given I want to turn the string into uppercase.)
Thanks in advance,
Avraham

Hi Avraham ,
To check whether the string is in upper case or not use CA keyward.
To check try the following code ---
DATA : W_STRING(5) TYPE C,
W_ABCDE(26) TYPE C VALUE 'abcdefghijklmnopqrstuvwxyz'.
w_string = 'abcd'.
IF W_STRING CA W_ABCDE.
TRANSLATE w_string TO UPPER CASE.
ELSE.
MESSAGE 'It is a uppercase string' TYPE 'S'.
ENDIF.
Try this link this will definitely help you -
https://wiki.sdn.sap.com/wiki/display/ABAP/Validationofastringintermsof+case
Regards
Pinaki

How to check module abbreviations and whether they are installed or not ?

Hi All -
There was a question raised , that is self service parts planning module available/installed/registered in our current EBS or not ? How to check whether self service parts planning module is installed or available or not ?
Also i would like to check all the modules which are currently installed and can be used ?
Regards,

Our question says , we do not know the code for Self Service Parts Planning Module . How to check particularly these product is installed or not ?
from the link given , it describes that for self service parts planning code is "SPP" . Can you please confirm ?It is part of "Advanced Supply Chain Planning (ASCP)", so run the query in (How to Find Out Product Installation Information in Oracle Applications? [ID 1275690.1]) and pass the module name.
Similary can we get the product codes for all shared products, installed products and non-installed products. The doc referenced above in this reply will list all the module names, with the product codes and the status.
What does shared products actually mean ?Patching Shared Oracle E-Business Suite Products [ID 1069099.1]
Thanks,
Hussein

How to check weather my i phone is officially unlock of not

Hi everyone
Recently i got iphone 3g , but im not sure how to check weather its officially unlock or not. So that i should upgrade the os with locking it.
Serial no 5K9098AKY7K
Model MB496X
IMEI 01 180900 090330 3
Plz help me out

Look i bought it from open market in pakistan
Then there is no way to confirm that your phone was officially unlocked. Buying from a non-official source, especially an "open market", means you're at the mercy of the seller as to the accuracy of the phone's status. Based on postings here, most of these phones have been hacked. You'll find out for sure though if you update to 3.1.3.

How to check HP ENVY 15-j137TX battery is genuine or not?

Hello,
is there anyway to check the laptop bettry and charger are genuine or not?? mean by entering the product number/ serial number of the laptop??
Thanks.

Hi;
Actually I want to know that which charger (how much watts charger) comes with "Hp Envy 15 ts-j137tx"? As I read from net that charger of this model laptop must be 90 watts or 120 watts, while I got with brand new laptop only 65 Watts charger. So I want to confirm that this charger comes with this model from company or the retailer/dealler change it?
Dear, My Second query is that I check on net that my laptop waranty stars from Aprial 2014 and up to Aprial 2016, while I purchase it on 15 November, 2014 so why warranty starts 8 month earlier. So I am worried that this retailer may be gives me a used laptop while charged from me for brand new. So kindly clear these two queries.
Thanks:
ReehanRao

How to check whether a SMTP server is supporting Authentication or not

Hi All,
We are using Java Mail API 1.3.1/1.3.2 to send the messages. some of the SMTP servers that we use are supporting authentication and some of them are not.
As the SMTPTransport.supportsAuthentication() is not available only in Java mail API 1.4.1, we are identifying the SMTP server whether it is supporting authentication or not in the following way.
Socket clientSocket = null;
InetSocketAddress socketAddress = null;
OutputStream outStream = null;
InputStream inStream = null;
InputStreamReader inReader = null;
OutputStreamWriter outWritter = null;
try
clientSocket = new Socket();
socketAddress = new InetSocketAddress(host, port);
clientSocket.connect(socketAddress, timeout*1000); // convert timeout from second to miliseconds
// 1: now try to execute the given command by passing that on Out-Socket
outStream = clientSocket.getOutputStream();
outWritter = new OutputStreamWriter(outStream);
outWritter.write("ehlo localhost" +"\n");
outWritter.flush();
// 2:Read output of above command
inStream = clientSocket.getInputStream();
inReader = new InputStreamReader(inStream);
// This array limit would be fine to get "AUTH" extension of smtp server.
char[] arr = new char[16384];
StringBuilder strBuilder = new StringBuilder();
inReader.read(arr);
for(int i=0; i< arr.length; i++)
strBuilder.append(arr);
System.out.println(METHOD_NAME + "SMTP server response for ehlo localhost command ->"+strBuilder.toString());
// The output EHLO command comes like below :
// ehlo localhost
// 250-ap9058pc.us.oracle.com Hello ap614ses.us.oracle.com [130.35.33.43], pleased to meet you
// 250-ENHANCEDSTATUSCODES
// 250-PIPELINING
// 250-8BITMIME
// 250-SIZE
// 250-DSN
// 250-ETRN
// 250-AUTH GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN
// Since for XATUH ( like internal IP),
// we are not sure, so just checking for AUTH capability.
supported = strBuilder.indexOf("250-AUTH") >=0? true : false;
As shown in above code, we are issuing 'ehlo localhost' command to SMTP server, if the response i. 'strBuilder' contains '250-AUTH' then we are assuming that it is supporting authentication.
But for one SMTP server the 'strBuilder' value is showing as '220 mail.durofelguera.com ESMTP Service (Lotus Domino Release 8.5.2) ready at Thu, 16 Feb 2012 13:57:20 +0100' only which is socket connection output but not 'ehlo localhost' command output.
where as the telnet test output is showing correct only as below
# telnet mail.durofelguera.com 25
Trying 172.20.16.65...
Connected to mail.durofelguera.com.
Escape character is '^]'.
220 mail.durofelguera.com ESMTP Service (Lotus Domino Release 8.5.2) ready
at 0
ehlo localhost
250-mail.durofelguera.com Hello localhost ([172.20.15.209]), pleased to meet
yu
250-HELP
250-AUTH LOGIN
250-SIZE
250 PIPELINING
AUTH LOGIN
The question is why the 'strBuilder' is not showing 'ehlo localhost' conad output where as the telnet test results are showing correctly, what is going wrong here?
Is there any other way to check that whether SMTP server is supporting authentication or not?
Edited by: sarojak on Feb 19, 2012 10:11 PM

There are so many things wrong with your code, it's hard to know where to start...
Basically, the problem is not as simple as you think it is.
For example, some servers might not allow authentication until you've issued
the STARTTLS command.
These days, essentially all servers allow authentication. You're probably better
off just assuming the server supports.

How to create a new Handling unit assigned to a Shipment?

Hi,
has anyone an experience how to create a new HU and assign it to a shipment (object type VEKP-VPOBJ = '04')?
I need to create it via SAPConsole transaction. Originally I intended to use LM19 to create an unassigned HU and to assign it further on via some BAPI. But I could not find any suitable BAPI for the assignment. Standard transaction LM24, allows only to create a HU with an assignement to a delivery (outbound/inbound).
Thank you
Martin

If you want to use function modules to accomplish this, here is 1 way.
BAPI_HU_CREATE
BAPI_TRANSACTION_COMMIT
BAPI_HU_CHANGE_HEADER
HU_POST
   lw_hproposal-hu_exid         = i_exidv. "Ext HU# Optional
   lw_hproposal-hu_status_init = 'A'.          "Planned. -
   lw_hproposal-pack_mat   = i_pack_mat.       "Packaging Material
* This will create an UNASSIGNED HU object type 12.
   CALL FUNCTION 'BAPI_HU_CREATE'
     EXPORTING
       headerproposal = lw_hproposal
     IMPORTING
       huheader       = lw_huheader
       hukey          = lv_hukey
     TABLES
       itemsproposal = li_iproposal
       return         = li_return.
* I could not assign to a shipment unless the commit was done.
IF lv_hukey IS NOT INITIAL.
     CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
       EXPORTING
         wait   = 'X'
       IMPORTING
         return = lw_return.
     IF sy-subrc NE 0.
       APPEND lw_return TO et_return.
     ENDIF.
*    Assign to a Shipment
     lw_huheader-pack_mat_object = i_object.               "04-HU Type for Shipment
     lw_huheader-pack_mat_obj_key = i_obj_key.           "Shipment #
     lw_huheader-dc_custom_mat    = i_dc_custom_mat."Sets the Dist Channel
     CALL FUNCTION 'BAPI_HU_CHANGE_HEADER'
       EXPORTING
         hukey     = lv_hukey
         huchanged = lw_huheader
       IMPORTING
         huheader = e_huheader
       TABLES
         return    = li_return.
     e_hukey       = lv_hukey.
*It is still not attached to the shipment until HU_POST is done.
LS_OBJECT-OBJECT = P_OBJTYP.    "04
   LS_OBJECT-OBJKEY = P_OBJKEY.   "Shipment Number.
CALL FUNCTION 'HU_POST'
EXPORTING
    IF_SYNCHRON          = ' '
    IF_COMMIT            = 'X'
    IS_OBJECT            = LS_OBJECT
IMPORTING
    ET_MESSAGES          = LT_MESSAGES

How to check if a user has a deferred task or not?

Right now, I use getView and then check for the deferred task as below
1)
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='getView'/>
<Argument name='type' value='User'/>
<Argument name='id' value='$(accountId)'/>
</Action>
2)
<Transition to='Add Deferred Task'>
<isnull>
<ref>view.accounts[Lighthouse].properties.tasks[Task Name]</ref>
</isnull>
</Transition>
Is there a quicker way to combine both steps 1 and 2 into one step?

Here's my code
<Action id='0' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='queryObjectNames'/>
<Argument name='type' value='User'/>
<Argument name='single' value='true'/>
<Argument name='attributes'>
<map>
<s>accountId</s>
<ref>accountId</ref>
<s>deferredTaskDate</s>
<s>Task 123</s>
</map>
</Argument>
</Action>
So I'll pass in 2 parameters, the accountId and a task name. I want to see if this user has that particular task name or not.
In the WF trace, I see this
Argument attributes = {accountId=ABC, deferredTaskDate=Task 123}
queryResult is null because it could not find this user even though user ABC exists in IDM and has a deferred task named Task 123.
Is my code wrong and how do I use AttributeCondition in the queryObjectNames above?

How to check the value from user input in database or not?

Hello;
I want to check the value of user input from JtextFiled in my database or not.
If it is in database, then i will pop up a window to tell us, otherwise, it will tell us it is not in database.
My problem is my code do not work properly, sometimes, it tell me correct information, sometime it tell wrong information.
Could anyone help,please.Thanks
The following code is for check whether the value in database or not, and pop up a window to tell us.
while( rs.next()) {
                System.out.println("i am testing");
                bInt=new Integer(rs.getInt("id"));
                if(aInt.equals(bInt)){ // If i find the value in data base, set flag to 1.
              flag=1; //I set a flag to check whether the id in database or not
                    break;
         System.out.println("falg" + flag);
            if(flag==1){ //?????????????????????
          String remove1 = "DELETE FROM Rental WHERE CustomerID=" + a;
          String remove2 = "DELETE FROM Revenus WHERE CustomerID=" +a;
          String remove3 = "DELETE FROM Customer WHERE id=" +a;
          s.executeUpdate(remove1);
          s.executeUpdate(remove2);
          s.executeUpdate(remove3);
                JOptionPane.showMessageDialog(null,"you have success delete the value");
          s.close();
         else//???????????????????????????????
              JOptionPane.showMessageDialog(null,"I could not found the value"); -------------------------------------------------------------------
My whole program
import java.sql.*;
import java.awt.BorderLayout;
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.*;
public class DeleteC extends JFrame
    public static int index=0;
    public static ResultSet rs;
    public static Statement s;
    public static Connection c;
    public static Object cols[][];
    private static JTable table;
    private static JScrollPane scroller;
    private static int flag=0;
    public DeleteC()
        //information of our connection
        //the url of the database: protocol:subprotocol:subname:computer_name:port:database_name
        String strUrl      = "jdbc:oracle:thin:@augur.scms.waikato.ac.nz:1521:teaching";
        //user name and password
        String strUser      = "xbl1";
        String strPass      = "19681978";
        //try to load the driver
        try {
            Class.forName("oracle.jdbc.driver.OracleDriver");
        catch (ClassNotFoundException e) {
            System.out.println( "Cannot load the Oracle driver. Include it in your classpath.");
            System.exit( -1);
        //a null reference to a Connection object
        c = null;
        try {
            //open a connection to the database
            c = DriverManager.getConnection( strUrl, strUser, strPass);
        catch (SQLException e) {
            System.out.println("Cannot connect to the database. Here is the error:");
            e.printStackTrace();
            System.exit( -1);
       //create a statement object to execute sql statements
    public void getData(String a){
        try {
         //create a statement object to execute sql statements
         s = c.createStatement();
            int index=0;
            Integer aInt= Integer.valueOf(a);
            Integer bInt;
              //our example query
            String strQuery = "select id from customer";
            //execute the query
            ResultSet rs = s.executeQuery( strQuery);
            //while there are rows in the result set
            while( rs.next()) {
                System.out.println("i am testing");
                bInt=new Integer(rs.getInt("id"));
                if(aInt.equals(bInt)){
              //JOptionPane.showMessageDialog(null,"I found the value");
              flag=1;
                    break;
         System.out.println("falg" + flag);
            if(flag==1){
          String remove1 = "DELETE FROM Rental WHERE CustomerID=" + a;
          String remove2 = "DELETE FROM Revenus WHERE CustomerID=" +a;
          String remove3 = "DELETE FROM Customer WHERE id=" +a;
          s.executeUpdate(remove1);
          s.executeUpdate(remove2);
          s.executeUpdate(remove3);
                JOptionPane.showMessageDialog(null,"you have success delete the value");
          s.close();
         else
              JOptionPane.showMessageDialog(null,"I could not found the value");
        catch (SQLException e) {
             JOptionPane.showMessageDialog(null,"You may enter wrong id");
My main program for user input from JTextField.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.JOptionPane;
import java.util.*;
public class EnterID extends JFrame{
    public JTextField tF1;
    public EnterID enID;
    public String tF1Value;
    private JLabel label1, label2, label3;
    private static JButton button;
    private static ButtonHandler handler;
    private static String aString;
    private static Integer aInteger;
    private static Integer checkV=0;
    public static void main(String args[]){
     EnterID eId= new EnterID();
   public EnterID(){
      handler=new ButtonHandler();
      Container c= getContentPane();
      c.setLayout(new GridLayout(3,1));
      button= new JButton("ok");
      button.addActionListener(handler);
      label1 = new JLabel(" CustomerID, Please");
      label2 = new JLabel("Label2");
      label3 = new JLabel();
      label3.setLayout(new GridLayout(1,1));
      label3.add(button);
      label2.setLayout(new GridLayout(1,1));
      aString = "Enter Id Here";
      tF1 = new JTextField(aString);
      label2.add(tF1);
      c.add(label1);
      c.add(label2);
      c.add(label3);
      setSize(150,100);
      setVisible(true);
   private class ButtonHandler implements ActionListener{
     public void actionPerformed(ActionEvent event){
         tF1Value=tF1.getText();
        //   CheckData cData = new CheckData();
         // aInteger = Integer.valueOf(tF1Value);
         if(tF1Value.equals(aString)){
          JOptionPane.showMessageDialog(null,"You didn't type value into box");
          setVisible(false);
        else {
          DeleteC dC= new DeleteC();
          dC.getData(tF1Value);
          setVisible(false);
}

You may have working code now, but the code you posted is horrible and I'm going to tell you a much much much better approach for the JDBC part. (You should probably isolate your database code from your user interface code as well, but I'm skipping over that structural problem...)
Do this instead:
    public void getData(String a){
        PreparedStatement p;
        String strQuery = "select count(*) the_count from customer where id = ?";
        try {
         //create a prepared statement object to execute sql statements, it's better, faster, safer
         p = c.prepareStatement(strQuery);
            // bind the parameter value to the "?"
            p.setInt(1, Integer.parseInt(a) );
            //execute the query
            ResultSet rs = p.executeQuery( );
            // if the query doesn't throw an exception, it will have exactly one row
            rs.next();
            System.out.println("i am testing");
            if (rs.getInt("the_count") > 0 ) {
            // it's there, do what you need to...
         else
              JOptionPane.showMessageDialog(null,"I could not find the value");
        catch (SQLException e) {
             // JOptionPane.showMessageDialog(null,"You may enter wrong id");
             // if you get an exception, something is really wrong, and it's NOT user error
        // always, always, ALWAYS close JDBC resources in a finally block
        finally
            p.close();
    }First, this is simpler and easier to read.
Second, this retrieves just the needed information, whether or not the id is in the database. Your way will get much much slower as more data goes into the database. My way, if there is an index on the id column, more data doesn;t slow it down very much.
I've also left some important points in comments.
No guarantees that there isn't a dumb typo in there; I didn't actually compile it, much less test it. It's at least close though...

How to check a text type if it is filled or not for specific user status

Hello;
I want to check if a text type in a notification is filled or not for a specific user status. I guess that can be done using the BADI "ORDER_SAVE", but not sure how to do that.
Regards,
Erkan Kaya

Hello Erkan.
You can use the function module CRM_ORDER_READ_OW in method check_before_save of BADI ORDER_SAVE.
Fill the header_guid of the notification into the it_header_guid table parameter and get the returning table ET_TEXT.
For performance reason you should provide importing parameter it_requested_objects.
INCLUDE CRM_DIRECT.
APPEND gc_object_name-texts TO it_required_objects.
Then you can check in et_Text if the required text is maintained. If not, you can raise the exception DO_NOT_SAVE in the BADI.
Regards,
Timo.

How to check if a Handling Unit is Back FLushed or not?

Similar Messages

Maybe you are looking for