How to check mappings execution time in Process flow

Hi All,
We created one process flow and scheduled it. It is successfully completed after 30 Minutes.
Process flows contains 3 mappings, First mapping complete sucessfully, Second mapping will start, after completing successfully second mapping. Third mapping will start and complete sucessfully. Success emails will generate.
I would like to know which mapping is taking long time execution.
Could you please suggest how can we find which mapping is taking long time execution.
I dont like to run each mapping indiviual and see the execution time.
Regards,
Ava.

Execute the below query in OWB owner or User schema
In place of '11111' give the execution id from control center.
select Map_run.NUMBER_RECORDS_INSERTED,
map_run.NUMBER_RECORDS_MERGED ,
map_run.NUMBER_RECORDS_UPDATED ,exe.execution_audit_id, Exe.ELAPSE_TIME,exe.EXECUTION_NAME,exe.EXECUTION_AUDIT_STATUS,map_run.MAP_NAME
  from ALL_RT_AUDIT_MAP_RUNS Map_run,ALL_RT_AUDIT_EXECUTIONS Exe
where   exe.EXECUTION_AUDIT_ID=map_run.EXECUTION_AUDIT_ID(+)
        and exe.execution_audit_id > '11111'
        order by  exe.execution_audit_id descCheers
Nawneet
Edited by: Nawneet on Feb 22, 2010 4:26 AM

Similar Messages

  • How to check SQL activity in OWB Process flow

    Hi,
    In OWB process flow,I need to check SQL activity. How to check that? I am using OWB 11g R2.
    Regards,
    Rashmik

    Gowtham,
    Well the following hint is provided by oracle warehouse builder help.........
    The time-out setting for the workflow engine determines how long the File Exist activity waits for a file. If the file does not arrive before the time-out setting expires, the File Exists activity terminates with errors.
    well someone with deep workflow knowledge can answer this one...
    If you get the answer please share with us.....
    Regards,
    Suraj.

  • How to get query execution time without running...?

    Hi ,
    I had one requirement .... as follows ......
    i had 3 sql statements . I need to execute only one sql which execution time is very less.
    Can any one help me , how to get query execution time without running that query and without using explain plan..?
    Thanks,
    Rajesh

    Kim Berg Hansen wrote:
    But you have ruled out explain plan for some reason, so I cannot help you.OP might get some answers if query was executed before - but since restart. Check V$SQL dynamic performance view for SQL_TEXT = your query. Then ROUND(ELAPSED_TIME / EXECUTIONS / 1000000) will give you average elapsed time.
    SY.
    Edited by: Solomon Yakobson on Apr 3, 2012 8:44 AM

  • How to avoid the long time consuming process of settlement on periodic basi

    For investment Project(purpose of capitalisation) related expenses We would like to show it  Directly in Balance Sheet rather than P/L  A/C.Whether it is feasible or not?as per one of consultant it will be first hit the p/L and after settlement it will only be shown in B/Sheet.So how to avoid the long time consuming process of settlement on periodic basis.

    Hi, could you write down an example? And what you mean by investment project-is this an WBS?

  • How long is the life time of process scope variable ?

    Hi All,
    How long is the life time of process scope variable befoer it expires ?
    Is it the same with the life time of session scope ?
    How can we set the value in OAS when deployment ?
    Thank you,
    xtanto

    Hi,
    http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/devguide/communicatingBetweenPages.html
    " Finally, processScope never empties itself; the only way to clear processScope is to manually force it to clear:
    AdfFacesContext afContext = AdfFacesContext.getCurrentInstance();
    afContext.getProcessScope().clear();
    Otherwise the variable lives for the duration of the window process. The referenced document above also shows how to set a variable to process scope
    Frank

  • How to check the last time a package has been compiled?

    How to check the last time a package has been compiled from sqlplus?

    LAST_DDL_TIME column in DBA_OBJECTS.

  • How to check the compilation time of C++ code on Xcode 6

    how to check the compilation time of C++ code on Xcode 6

    import java.util.Calendar;
    Calendar rightNow = Calendar.getInstance();  // gets the current date and time to millisec
    Calendar earlyTime = Calendar.getInstance().set(Calendar.HOUR_OF_DAY, 6).set(Calendar.MINUTE, 30);
    Calendar lateTime = Calendar.getInstance().set(Calendar.HOUR_OF_DAY, 8).set(Calendar.MINUTE, 0);
    if (rightNow.compareTo(earlyTime)> 0 && rightNow.compareTo(lateTime) < 0){
    // do something
    }Try this.

  • OWB11gR2: Mapping execution in a process flow not visible in OWB Browser

    When a mapping is executed inside a process flow, execution details are not visible in OWB Repository Browser (Control Center reports) - rows processed, errors etc. Mapping row is missing in a log, like it never happened (but it did).
    This auditing information is very important for monitoring reasons (to our customers also) and I just don't get it how this functionality is lost with this version. Another serious bug?

    Hi David,
    I was rather tired and frustrated last evening, so today I noticed some things I didn't yesterday. Your reply gave me a new motivation.
    The conclusion is - a mapping execution in a process flow is logged, but the way activities are displayed in OWB Browser are now different than in previous versions. If I click on 'Execution Job Report' on a process flow, I see all the activities listed except mappings (transformations, assign, file exists, subprocess etc.). If I want to see mapping execution row, I must click on a plus (expand) sign.
    This kind of behavior will make processes with a complex hierarchy (usually we have more than 5 levels of subprocesses) rather vast to monitor. In 10gR2, a drilling down was accomplished by opening a new browser tab (Execution Job Report link) for each subprocess/mapping activity. Now it shall remain on one huge screen (list) that keeps expanding.
    But, if that is the new feature, we shall live with that. If our customers won't like it, they will have to get used to it.
    Thank you for your reply!

  • How can I pass parameters from one process flow to another process flow?

    How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
    Thanks in advance,
    Kishan

    Hi Kishan,
    Please post this question to the Warehouse Builder forum:
    Warehouse Builder
    Thanks, Mark

  • How to extend the execution time of an ABAP Program using the Process chain

    Hello Sapians,
    Our Environment has got 600seconds = 10 mintues as the execution time.
    My ABAP Program is taking more than this 600 seconds, to show the result, I found this when I tried to execute in debug mode, it shows the result.
    If I execute in background also it shows the results succesfully.
    Only issue is when I execute this report in foreground it has been taking ages and goes on Time OUT Error.
    It has been decided that we can extend the execution time only for this report, and it will reset the time back to 10mintues once the report has been executed successfully or failed in between for any other reasons.
    And we can achieve this by using the process chains.
    Can any body help me please in this regard
    Thanks,

    Hi,,,,,,,,,,
    Besides Process Chain There is another way out for this........
    Resetting time counter of dialog process so that time-out does not
    happen. Use this fm within your program at appropriate locations to
    reset time counter.
    "CALL FUNCTION 'TH_REDISPATCH'."
    Thanks
    Saurabh

  • How to improve the execution time of my VI?

    My vi does data processing for hundreds of files and takes more than 20 minutes to commplete. The setup is firstly i use the directory LIST function to list all the files in a dir. to a string array. Then I index this string array into a for loop, in which each file is opened one at a time inside the loop, and some other sub VIs are called to do data analysis. Is there a way to improve my execution time? Maybe loading all files into memory at once? It will be nice to be able to know which section of my vi takes the longest time too. Thanks for any help.

    Bryan,
    If "read from spreadsheet file" is the main time hog, consider dropping it! It is a high-level, very multipurpose VI and thus carries a lot of baggage around with it. (you can double-click it and look at the "guts" )
    If the files come from a just executed "list files", you can assume the files all exist and you want to read them in one single swoop. All that extra detailed error checking for valid filenames is not needed and you never e.g. want it to popup a file dialog if a file goes missing, but simply skip it silently. If open generates an error, just skip to the next in line. Case closed.
    I would do a streamlined low level "open->read->close" for each and do the "spreadsheet string to array" in your own code, optimized to the exact format of your files. For example, notice that "read from spreadheet file" converts everything to SGL, a waste of CPU if you later need to convert it to DBL for some signal processing anyway.
    Anything involving formatted text is not very efficient. Consider a direct binary file format for your data files, it will read MUCH faster and take up less disk space.
    LabVIEW Champion . Do more with less code and in less time .

  • How query cost and execution time are releated ?

    hi experts,
      i am curious to know, how the query cost and execution time is related?
     Query taking less time ,query cost is 65%, but query taking more time but query cost is 0%.
    how to connect both and improve query performance.
    Thanks

    i think you are refering to cost (relative to the batch) execution 65%, where there are more that one statement, it may compare the cost of each statement with in the batch
    i assume it mainly take subtree cost and IO stat as cost, but in some cases i may wrong when there is multi line function and many other facter influence the cost, and i would say it depends on the query
    cost is unit-less
    The reason these costs exist is because of the query optimization SQL Server does: it does cost-based optimization, which means that the optimizer formulates a lot of different ways to execute the query, assigns a cost to each of these alternatives, and
    chooses the one with the least cost. The cost tagged on each alternative is heurestically calculated, and is supposed to roughly reflect the amount of processing and I/O this alternative is going to take.
    refer :
    http://blogs.msdn.com/b/sqlqueryprocessing/archive/2006/10/11/what-is-this-cost.aspx
    Thanks
    Saravana kumar C

  • How to find the Execution Time for Java Code?

    * Hi everyone , i want to calculate the execution time for my process in java
    * The following was the ouput for my coding,
    O/P:-
    This run took 0 Hours ;1.31 Minutes ;78.36 Seconds
    *** In the above output , the output should come exactly what hours , minutes and seconds for my process,
    but in my code the minutes are converted into seconds(It should not)...
    * Here is my coding,
        static long start_time;
        public static void startTime()
            start_time = System.currentTimeMillis();
        public static void endTime()
            DecimalFormat df = new DecimalFormat("##.##");
            long end_time = System.currentTimeMillis();
            float t = end_time - start_time;
            float sec = t / 1000;
            float min = 0, hr = 0;
            if (sec > 60) {
                min = sec / 60;
            if (min > 60) {
                hr = min / 60;
            System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
        }* How to Calcualte exact timing for my process....
    * Thanks

    * Hi flounder, Is following code will wotk perfectly?
         public static void endTime()
              DecimalFormat df = new DecimalFormat("##.##");
              long end_time = System.currentTimeMillis();
              float t = end_time - start_time;
              float sec = t / 1000;
              float min = 0, hr = 0;
              while(sec >= 60){
         min++;
         sec = sec -60;
         if (min >= 60){
         min = 0; //or min = min -60;
         hr++;
              System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
         }

  • To Check the execution time for each transaction.

    Abapers,
    How to find out the process time for each transaction eg.order entry,shippng,billing, etc in SAP.
    TIA,
    sinthu

    Hi,
        By default you can see the execution time at right side corner of sap session.
    You can use SE30 to get in to more details like database time , abap time etc...
    Hope it helps...
    Regards,
    Vijay

  • How to measure fpga execution time

    Howdy--
    I'm hacking through my first FPGA project without yet having the hardware on hand, and I find I could answer a lot of my own questions if I could predict what the execution time (ticks, mSec, whatever) of bits of my code will be.  Running FPGA VIs on the Dev Computer with built in tick counters does not seem to be the proper way to go.  Is it possible to know the execution time of FPGA code before compiling and running it on the target?
    If it matters to anyone, my context for the question is a situation where a 10 uSec loop is imposed by the sample time of my hardware (cRIO 9076, with a couple of 100 ks/S I/O cards), and I'm trying to figure out how much signal processing I can afford between  samples.
    Thanks everyone, and have a great day.
    Solved!
    Go to Solution.

    bcro,
    You can look into cycle accurate simulation, which would give you a better understanding of how your code will work.  More information can be found here: http://zone.ni.com/devzone/cda/tut/p/id/12917
    As a rough measure, you can estimate that simple functions will take one tick to execute.  However, there is not list of what is and is not a simple function.
    You could also try placing code inside a single cycle timed loop (SCTL), which would then guarantee that all of the code in the loop will execute in 1 tick.  However, if you are doing a lot of operations or trying to acquire an analog input, this will fail compilation.
    Drew T.
    NIC AE Specialist

Maybe you are looking for