How to check reentrant setting

Hello All,
is there a smart way to check all of my VI's if they are set to
reentrant or not ? Maybe i have to write a VI that read the properties
of each VI and Sub VI ? Any good ideas ?
Kind regards
Sander

You might find the attached useful (LabVIEW 6.0.2). It finds all VI's in memory, and uses a reference and a property node to determine if they are reentrant.
I would recommend looking at memmon.llb in the examples section that ships with LabVIEW. I had personally never realized that there was an AllVI's in memory property for the application.
Thanks for the good question!
Attachments:
VI_In_Memory_Reentrant.vi ‏36 KB

Similar Messages

How to check whether set up tables are filled or not

Hi Gurus,
How to check whehter set up tables are filled or not?
Cheers,
Reddy.

Hi Reddy.......
And another point I want to make u clear............LBWQ is not the Delta Queue.............Delta queue is RSA7...............it comes into play in delta loading.......LBWQ is Extraction Queue.........While delta loading....if we use the Update mode Queued Delta........then any Changes will not directly get updated in the Delta queue.....For the Delta set up.........
1) First u hav to run init with data transfer(After filling the set up table)
2) After that any Changed ........will be recorded in the Extraction Queue(LBWQ)........
3) After a certain number of records get accumulated in LBWQ........We hav to run V3 jobs to bring the data in the Delta queue(RSA7)...
Check this.....
Re: question on LBWQ and RSA7
Regards,
Debjani.....

How to check audit setting and read audit data?

I enable auditing for ase and then check information for sysaudits_xx table like:
select * from sysaudits_02 order by eventtime desc
and got same data like:
event
eventmod
spid
eventtime
sequence
suid
dbid
objid
xactid
loginname
dbname
objname
objowner
extrainfo
16
45
1
130
05/15/2014 1:49:03.353 PM
1
38
5
[NULL]
[NULL]
mylogin
mydb
[NULL]
[NULL]
; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
17
45
1
170
05/15/2014 1:49:03.320 PM
1
38
5
[NULL]
[NULL]
mylogin
mydb
[NULL]
[NULL]
; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
18
45
1
84
05/15/2014 1:49:03.283 PM
1
38
5
[NULL]
[NULL]
mylogin
mydb
[NULL]
[NULL]
; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
19
45
1
82
05/15/2014 1:49:03.243 PM
1
38
5
[NULL]
[NULL]
mylogin
mydb
[NULL]
[NULL]
; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
20
45
1
141
05/15/2014 1:49:03.210 PM
1
38
5
[NULL]
[NULL]
mylogin
mydb
[NULL]
[NULL]
; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
21
45
1
80
05/15/2014 1:49:03.170 PM
1
38
5
[NULL]
[NULL]
mylogin
mydb
[NULL]
[NULL]
; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
22
45
1
71
05/15/2014 1:49:03.133 PM
1
38
5
[NULL]
[NULL]
mylogin
mydb
[NULL]
[NULL]
; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
23
45
1
52
05/15/2014 1:49:03.096 PM
1
38
5
[NULL]
[NULL]
mylogin
mydb
[NULL]
[NULL]
; ; ; ; myhost, 192.168.1.17; ; mylogin/ase;
what kind of event monitored for with this data? how to stop monitoring on this event?
Also how to check all auditing setting is on. For example, if I turn on audit on disk like:
sp_audit "disk", "all", "all", "on"
then how to know how many auditing event is on in the future(maybe set by someone else)?

Hi Kent,
In general sp_displayaudit will show you what audit options are currently on.
The function audit_event_name will help you decode the audit event numbers.
1>
2> select audit_event_name(45)
3> go
Login
(1 row affected)

How to check my Blackberry 9360 Wtty?

I loss the receipt and my wtty card without shop chop... How to check my set wtty?

most likely.
If your phone is truly unlocked you will see a message in iTunes when you restore or update your firmware.
Did you purchase your phone new? Was it purchased unlocked from an Apple-authorized dealer?
If you bought your phone off of ebay or another grey-market seller, chances are you have a locked phone. In that case, only the carrier to which the phone is locked can initiate an unlock. Some carriers allow this, others do not for any reason.

How can i check my setting details are correct on my iPhone I recevied an error when sending a text this morning and while checking it out noticed my state and city are wrong

How can i check my setting / about tab? This morning I got an error message say something wasn't safe (not sure what) I think it was my common name whcih is ch4iv.myvzw.com and while looking in there I noticed my state say NJ I live in PA, I did not buy my phone in NJ, the city says Bedminster I have never even been there. Can anyone advise?
Can't I go on my Apple account and get to my setting / details.

Here is the message...

In my pc iam using fire fox now it is asking please check procky setting i am using 13.0 how can i solve this problem

in my pc iam using fire fox now it is asking please check procky setting i am using 13.0 how can i solve this problem

Firefox, please update to Firefox 31. [[Update Firefox to the latest version]] 13 is not supported anymore.
After that, [[Advanced settings for accessibility, browsing, system defaults, network, updates, and encryption]]

How to check the Customizing setting in Different SAP CRM System

Hello Guru's
I want to know how to check the Customizing setting in Different system i.e (Sandbox,Development,Quality,Production)
I mean to say that i was to check all the 4 system are in same line in all the aspects or sink with each orther
Thanks in advance
With Regards
Sreeram

hi
to synchronise all the clients in the CRM,u need to structure ur transport request,that is whenever a request has been made,the same has been transported to all the clients or not
Go to T-Code -SE09 and copy all released transport request from each client from Sandbox,Development,Quality,Production and match all request manually.
this is just a way other may be to see manually all the settings in all the clients
best regards
ashish

How to check changes made in standerd layout set

Hi abaper's
How to check the changes made in the standard layout set , other than using Utilities--- -> Print preveiw ?

Hi,
In ABAP there is no chance to check the version managment of the script , the better option to get this is to develop a small tool as follows:-
Every time u release the request of a script or layout just import that layout with (layoutname_request) no in application server. and using this RSTXFCOM program u can check transported one with existing.
Note: Everytime while checking transported one make it a local layout in RSTXFCOM we can check two layout differences.
Thanks
Pathan

The database structure has been modified - how to check if it happend?

Hello,
I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
My question is - does anyone know how to check if database structure has been modified?
Regards,
Hmg

Hi Szymon,
I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
Satish.

How to check connection from SAP to reservation system?

Dear Experts,
May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
Thanks.

Hi
You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
For more information, see Technical Prerequisites for Travel Planning--
Technical Prerequisites for Travel Planning
Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
Connection to an External Reservation System
The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
u2022 Availability query of travel services
u2022 Transfer of additional information about selected travel services
u2022 Price information
u2022 Processing of reservation by the respective provider
u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
In order to carry out online booking via AMADEUS the following must have been carried out:
u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
u2022 A network connection to the AMADEUS computer center must have been opened
u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
For questions about registration, contact the SAP & AMADEUS Competence Center:
SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
Cheers
Mukta

How to change a setting in the Java Control Panel with command line

Hi,
I am trying to figure out how to change a setting in the Java Control Panel with command line or with a script. I want to enable "Use SSL 2.0 compatible ClientHello format"
I can't seem to find any documentation on how to change settings in the Java Control Panel via the command line
Edited by: 897133 on Nov 14, 2011 7:15 AM

OK figured it out. This is for the next person seeking the same solution.
When you click on the Java Control Panel (found in the Control panel) in any version of Windows, it first looks for a System Wide Java Configuration (found here: C:\Windows\Sun\Java\Deployment). At this point you must be wondering why you don't have this folder (C:\Windows\Sun\Java\Deployment) or why its empty. Well, for an enterprise environment, you have to create it and place something in it - it doesn't exist by default. So you'll need a script (I used Autoit) to create the directory structure and place the the two files into it. The two files are "deployment.properties" and "deployment.config".
Example: When you click on the Java Control Panel it first checks to see if this directory exists (C:\Windows\Sun\Java\Deployment) and then checks if there is a "deployment.config". If there is one it opens it and reads it. If it doesn't exist, Java creates user settings found here C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7.
__deployment.config__
It should look like this inside:
*#deployment.config*
*#Mon Nov 14 13:06:38 AST 2011*
*# The First line below specifies if this config is mandatory which is simple enough*
*# The second line just tells Java where to the properties of your Java Configuration*
*# NOTE: These java settings will be applied to each user file and will overwrite existing ones*
deployment.system.config.mandatory=True
deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties
If you look in C:\Users\USERNAME\AppData\LocalLow\Sun\Java\Deployment on Windows 7 for example you will find "deployment.properties". You can use this as your default example and add your settings to it.
How?
Easy. If you want to add *"Use SSL 2.0 compatible ClientHello format"*
Add this line:
deployment.security.SSLv2Hello=true
Maybe you want to disable Java update (which is a big problem for enterprises)
Add these lines:
deployment.javaws.autodownload=NEVER
deployment.javaws.autodownload.locked=
Below is a basic AutoIt script you could use (It compiles the files into the executable. When you compile the script the two Java files must be in the directory you specify in the FileInstall line, which can be anything you choose. It will also create your directory structure):
#NoTrayIcon
#RequireAdmin
#Region ;**** Directives created by AutoIt3Wrapper_GUI ****
#AutoIt3Wrapper_UseX64=n
#EndRegion ;**** Directives created by AutoIt3Wrapper_GUI ****
Func _JavaConfig()
     $ConfigFile_1 = @TempDir & "\deployment.properties"
     $ConfigFile_2 = @TempDir & "\deployment.config"
     FileInstall ("D:\My Documents\Autoit\Java config\deployment.properties", $ConfigFile_1)
FileInstall ("D:\My Documents\Autoit\Java config\deployment.config", $ConfigFile_2)
     FileCopy($ConfigFile_1, @WindowsDir & "\Sun\Java\Deployment\", 9)
     FileCopy($ConfigFile_2, @WindowsDir & "\Sun\Java\Deployment\", 9)
     Sleep(10000)
     FileDelete(@TempDir & "\deployment.properties")
     FileDelete(@TempDir & "\deployment.config")
EndFunc
_JavaConfig()
Now if you have SCUP and have setup Self Cert for your organization, you just need to create a SCUP update for JRE.
Edited by: 897133 on Nov 16, 2011 4:53 AM

How to check the verity version in our PeopleSoft Installation?

How to check the verity version in our PeopleSoft Installation? I am not sure if the verity is installed or not and also if installed what is the version?

yes. it says the version is 5.0.1
Is there any difference in installation or configuration when the app and web server are in same machine and when the app and web server are installed in different servers?
============================================
D:\fs840\webserv\peoplesoft>mkvdk
mkvdk - Verity, Inc. Version 5.0.1 (_nti40, Jul 23 2004)
Usage: mkvdk [<option>...] <filespec>...
Where <option> can be a VDK switch, or any of:
-about Show the collection's about resources
-autodel Delete bulk insert file when no longer needed
-backup <dir> Specify collection backup location
-bulk Submit bulk insert file(s)
-charmap <name> Specify the character map to VDK
-collection <path> Specify the collection (required)
-create Create the collection
-credentials <user> Specify user[:passwd][:domain][:mailbox]
-datapath <path> Specify VDK datapath
-datefmt <fmt> Specify date format to VDK
-debug Enable debugging output
-delete Delete documents
-description <desc> Set the collection's description
-diskcache <num> Set VDK's disk cache size (kbytes)
-extract Extract field values from text
-help Print this usage information
-insert Insert documents (default)
-locale <locale> Specify the locale to VDK
-logfile <file> Save output in a log file
-loglevel <num> Set the VDK output level for the log
-mailboxes This option is depracated. Use the credentials option inste
ad
-maxfiles <num> Set VDK's maximum number of open files
-maxmemory <num> Set VDK's maximum memory usage (kbytes)
-mode <mode> Set the indexing mode
-modify Modify fields using field/value pairs from a bulkfile
-nohousekeep Disable housekeeping
-noindex Disable indexing
-nolock Turns off locking (dangerous)
-nooptimize Disable optimizations
-nosave Don't save collection work list
-noservice Prevents servicing of submitted work
-nosubmit Don't submit work to VDK
-numdocs <num> Number of documents to insert from bulk insert file(s)
-numpages <num> Synonym for diskcache for backward compatibility
-offset <num> Specify offset into bulk insert file(s)
-online Flag for online Bulk Modify
-optimize <spec> Optimize the collection
-outlevel <num> Set the VDK output level
-persist Service the collection forever
-purge Remove all documents from collection
-purgeback Purge in the background
-purgewait <secs> Specify delay before purge
-quiet Suppress all non-error messages
-repair Repair the collection
-servlev <spec> Advanced option for overriding service level
-sleeptime <secs> Interval between service calls for persist
-style <dir> Specify style directory for create
-submit Synonym for noservice for backward compatibility
-synch Perform work synchronously
-topicset <path> Specify VDK topic set
-update Update documents
-vdkhome <path> Specify VDK home
-verbose Output more information
-words Build word assist list
-wordindex Build word assist index
The <spec> for -optimize is a hyphenated string of:
maxmerge Perform maximal merging of partitions
squeeze Recover space from deleted documents
vdbopt Build optimized VDB's
spanword Create word list spanning all partitions
ngramindex Create ngram index into spanning word list
maxclean Really clean (not for read-write)
readonly Make the collection read-only
tuneup Fully optimize for read-write use
publish Fully optimize for read-only use
The <spec> for -servlev is a hyphenated string of:
search Enable search and retrieval
insert Enable adding and updating documents
optimize Enable opportunistic collection optimization
assist Enable building of word list
housekeep Enable housekeeping of unneeded files
delete Enable document deletion
backup Enable backup
purge Enable background purging
repair Enable collection repair
dataprep Same as search-index-optimize-assist-housekeep
index Same as insert-delete
Error: must specify collection
mkvdk done
D:\fs840\webserv\peoplesoft>

How to Check System Preference Settings with Time Machine

I just found and fixed a problem caused by a bad System Preference/Universal Access
setting and would like to go back in my Time Machine backup to see where the
error was made. I may have been too quick to blame the 10.5.3 update on the
problem so wanted to look back in time.
The problem is i don't know how to check System Preferences using the Time Machine.
Any suggestion?

If you're looking for specific settings, the short answer is you cannot. You can open the .plist files and try to find the specific option you're looking for, though it might not be too easy to decipher some of the contents of the .plist file. For the most part they're just lists of attributes and settings. For instance, here's a very small chunk of my Finder .plist file:
<key>All Images.cannedSearch</key>
<dict>
     <key>SidebarWidth</key>
     <integer>162</integer>
     <key>ToolbarVisible</key>
     <true/>
     <key>ViewHeight</key>
     <integer>1116</integer>
     <key>ViewStyle</key>
     <string>icnv</string>
     <key>WindowBounds</key>
     <dict>
          <key>bottom</key>
          <integer>1200</integer>
          <key>left</key>
          <integer>56</integer>
          <key>right</key>
          <integer>1920</integer>
          <key>top</key>
          <integer>84</integer>
     </dict>
</dict>
<key>AnimateInfoPanes</key>
<true/>
<key>AnimateSnapToGrid</key>
<string>true</string>
<key>AnimateWindowZoom</key>
<true/>
Each "key" is followed by an attribute, so for instance the "SideBar Width" key is given the "Width" integer attribute of 162. However, some keys have multiple entries, such as the "WindowBounds" key having sub-keys of "bottom", "left", "right", and "top".
These values are finder preferences, though are not accessible via the finder's preference settings. However, buried deep in the Finder's .plist file are some of the user-editable settings:
<key>ShowHardDrivesOnDesktop</key>
<true/>
<key>ShowMountedServersOnDesktop</key>
<true/>
<key>SidebarSearchesSectionDisclosedState</key>
<false/>
If you can find the attribute you're looking for, then that may help you narrow down which version of a .plist file to restore, though not all of them are straightforward legible text. Some have bizarre strings of seemingly random characters that only the application can interpret.
Message was edited by: Topher Kessler

How to enable user sets from tools in sales order

Hi,
How to enable user sets from tools in sales order..it is greyed out..
and is there anyway we can do to add shipsets from other place?
Thanks

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

How to check the row level security in TOAD for oracle

Hi ,
for ex, i have 2 types of users
normal user and super user
super user can see the group set (some column name) created by normal user
but normal user can not see the set created by super user
this set crestion aslso has 3 types "U','P',S'
P & S can be viewed by even normal user
but U should not
so here we are having some row level security for the normal user .....
So, in TOAD for oracle how to check that......
Let me know if i'm not clear

Like
I'm the super user....
And some records are inserted to a table by different users ('a' , 'b', etc....)
So,if user 'a' logins then he can be able to see only the records inserted by 'a' only...
how to see in TOAD where such type of scripts (filter conditions) are written.....

How to check reentrant setting

Similar Messages

Maybe you are looking for