How to check the status from the backend in workflows

How to approve or retry the work flows which are in error or any status. this can be done through status monitor in workflow administrator web applciations in fornt-end. But my requiremnet is to do the same from back-end by executing the query.
thanks & regards
arifuddin

Hi;
Duplicate post, please post once
po's whcih are in error by a specific user
Regard
Helios

Similar Messages

How to check system status from Windows command line?

Does anyone has an idea how to check system status from Windows command line? In UNIX we use startsap check, unfortunately I didn't find an appropriate command provided by SAP.
The only idea we have is to use
tasklist /FI "Username eq SAPService<SID>" | find "disp+work"
which isn't as nice as startsap check.

Hi,
In windows you can use the command
go to profile directory in command prompt and the give the following command to check the status of the instance.
sapstart check pf=START_DVEBMGS<nr>_<hostname>
that means you need to mention start profile or instance profile. So that it will say whether the instance is running or not.
If you want any other information please reply back to me.
Thanks,
Chaitanya.

LabVIEW DSC: How to get alarm status from the area?

Colleagues,
I have, lets say, 50 Shared Variables where alarming enabled. Some of these variables assigned to area, so I can get status of the entire area or acknowledge an entire area of alarms (prior to version 8.x there was groups of the tags).
Now I would like to get alarm status from the entire area. How can I do it?
In version 6 I was able to wire tag group to Get Alarm Summary Status. Now, in version 8, Alarm Status.vi can be wired to the array of the variables, but not to area. Is it possible to get all variables from the area?
regards,
Andrey.

I am not sure if I should be posting my problem under this particular topic. I am having trouble understanding acknowledge alarm vi and what this vi is supposed to do is not clear to me yet.
I have around 300 shared variables in my project and I have created a particular vi just to view the alarms that may pop up during runs. I created a main menu and this alarm vi can be accessed upon a button click in the main menu. Users get alarm alert based on sound configuration. Then he can navigate to the alarm vi and acknowledge the alarm. The alarm vi only contains alarm and event display found under DSC module.
The problem is everytime I click the alarm button in the main menu, it takes around 2 minutes for the alarm vi to update which is very annoying and unsatisfactory in the middle of run. I am not sure why it happens and I haven't got any response from support yet. These shared variables are managed under 10 different library files that are set up based on different loops of the process (flow, pressure and so on).
Then I looked into three alarm examples that ship with DSC module. None of these examples use acknowledge alarm vi. I implemented another vi similar to alarm demo vi in that example - containing multicolumn listbox. I created acknowledge event containing acknowledge button and used the acknowledge alarm vi under this event. Read vi alarm is under timeout event.
When I click the acknowledge button as soon as I see the alarm in multicolumn listbox, nothing happens - the color of font does not get changed to purple neither any alarms get acknowledged. I tried to aknowledge alarm by variable name or alarms or alarm area, it does not give me anything. What is this acknowledge alarm supposed to do? I tried to find examples everywhere in the web that uses this particular vi and haven't found one yet.

How to check Debug messages in the server

Hi All,
I am working on extensions and in my java controller file i have certain System.out.println messages. I would like to know how to check these messages from the server for debugging purpose.
Kindly help me in the same.
Thanks
Deeksha

11i - log file location - $APACHE_TOP/Jserv/logs/jserv.log
r12 - log file location - $INST_TOP/logs/ora/10.1.3/opmn/oacore_default_group_1/oacorestd.out
You can prepend your SOP with some text and search for the text in the log files.

How can I change the status of the fileupload UI from disable to enable?

Hi, experts,
The Version of my Netweaver studio is 7.0.11.
I create a view with fileupload UI element in WebDynpro for Java application, but the fileupload UI element is disabled so that I don't select file when I click the button in the fileupload UI element after I run the application.
How can I change the status of the fileupload UI element from disable to enable?
Best regards,
tao

Hi
look at this thread [HI Masters , I need information for file upload program in web dynpro java|HI Masters , I need information for file upload program in web dynpro java]
and check if u bind each file upload element to binary property in the context

How to pass the values from the Wb Dynpro Application to the SAP Backend ?

Hi All,
Good morning..,
I have scenario like:
I want to pass the values from the web dynpro appication to the SAP Back end R/3 Table. IN backend the RFC is writtn to accept the structure input from the Webdynpro.
Upto know I imported the corresponding RFC and maaped to the View.
How to proceed with the coding to save the data...
PLease suggest...
Regards and Thanks in Advance,
CSP

Hi Pradeep
Steps:
1. First create an instance for bapi and bind the instance to the bapi node.
Z<bapi name> zb=new Z<bapi name>();
wdContext.nodeZ<bapi name>. bind(zb);
2. Then if u have the import parameter u have to set them by using
    The instance of the above bapi.
    Zb.set<import parameters>;
3. If the bapi has a table parameters then the structure for the table parameters will also be imported
   In the model class.
4. Set the table parameters by creating the instance for that structure and using this instance set it.
   Z<Struct>itm tab=new Z<Struct>();
   Tab.set<table parameters>
5. Then add the structure instance to the bapi instance.
    Zb.add(Tab);
6. Then Execute the bapi after setting the import parameters.
7. If there is any export parameters, then get the values after execution.
Look at this thread for codes
Re: RFC call on click of button
Regards,
Arun

Is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how? Will the status of the games be the same?

is it possible for me to transfer my downloaded games from my itouch to my ipad? If yes, how? Will the status of the games be the same?

As long as the apps are still available in the store, and you use the same iTunes account as you originally used to buy them, then you should be able to re-download them for free : http://support.apple.com/kb/HT2519
If you want to copy over your progress then you will need to try backin up the iPod and restoring that backup onto the iPad - you can't just restore individual apps, it's all or nothing.

How to check the status on the server

I have a jsp page which runs a tcl program in the background. This tcl program will generate a HTML file and the HTML
file will be residing in the server. Is there a way in the jsp to check the status on the server so that the moment HTML file is on
the server and capture the date/time and display in the JSP.
Thanks

If the JSP is on the same server, then you can just use the File class to check that the file exists and get the timestamp of the file.

How to identify the status of the data load

Hi All,
Here is my requiremenet,
I have a process called etl_pf2 which loads the data into staging tables. Now I have another process that does a partition exchange and moves the data from staging tables to online tables.
In one procedure, I need to verify whether any data load into the staging tables is happings. If yes then partiontion should not occur, if no then movement should happen.
Any idea on any parameter which can be used in the procedure to check the status of the data load in staging tables.
Please help me.

Thanx for reply
But i thhink that the problem is with NQSServer which crashes but not disappears from the processes list.
I tried to search obiee+USER_MEM_ARGS and nqsserver+USER_MEM_ARGS but found only this thread.
How can JVM settings help to nqsserver.exe to work properly?

In VB how do I pass my low and high limit results from a TestStand Step into the ResultList and how do I retrieve them from the same?

I am retrieving high and low limits from step results in VB code that looks something like this:
' (This occurs while processing a UIMsg_Trace event)
Set step = context.Sequence.GetStep(previousStepIndex, context.StepGroup)
'(etc.)
' Get step limits for results
Set oStepProperty = step.AsPropertyObject
If oStepProperty.Exists("limits", 0&) Then
dblLimitHigh = step.limits.high
dblLimitLow = step.limits.low
'(etc.)
So far, so good. I can see these results in
VB debug mode.
Immediately after this is where I try to put the limits into the results list:
'Add Limits to results
call mCurrentExecution.AddExtraResult("Step.Limits.High", "UpperLimit")
call mCurrentExecution.AddExtraResult("Step.Limits.Low", "LowerLimit")
(No apparent errors here while executing)
But in another section of code when I try to extract the limits, I get some of the results, but I do not get any limits results.
That section of code occurs while processing a UIMsg_EndExecution event and looks something like this:
(misc declarations)
'Get the size of the ResultList array
Call oResultList.GetDimensions("", 0, sDummy, sDummy, iElements, eType)
'Step through the ResultList array
For iItem = 0 To iElements - 1
Dim oResult As PropertyObject
Set oResult = oResultList.GetPropertyObject("[" & CStr(iItem) & "]", 0)
sMsg = "StepName = " & oResult.GetValString("TS.StepName", 0) & _
", Status = " & oResult.GetValString("Status", 0)
If oResult.Exists("limits", 0&) Then
Debug.Print "HighLimit: " & CStr(oResult.GetValNumber("Step.Limits.High", 0))
Debug.Print "LowLimit: " & CStr(oResult.GetValNumber("Step.Limits.Low", 0))
End If
'(handle the results)
Next iItem
I can get the step name, I can get the status, but I can't get the limits. The "if" statement above which checks for "limits" never becomes true, because, apparently the limit results never made it to the results array.
So, my question again is how can I pass the low and high limit results to the results list, and how can I retrieve the same from the results list?
Thanks,
Griff

Griff,
Hmmmm...
I use this feature all the time and it works for me. The only real
difference between the code you posted and what I do is that I don't
retrieve a property object for each TestStand object, instead I pass the
entire sequence context (of the process model) then retrieve a property
object for the entire sequence context and use the full TestStand object
path to reference sub-properties. For example, to access a step's
ResultList property called "foo" I would use the path:
"Locals.ResultList[0].TS.SequenceCall.ResultList[].Foo"
My guess is the problem has something to do with the object from which
you're retrieving the property object and/or the path used to obtain
sub-properties from the object. You should be able to break-point in the
TestStand sequence editor immediately after the test step in question
executes, then see the extra results in the step's ResultList using the
context viewer.
For example, see the attached sequence file. The first step adds the extra
result "Step.Limits" as "Limits", the second step is a Numeric Limit (which
will have the step property of "Limits") test and the third step pops up a
dialog if the Limits property is found in the Numeric Limit test's
ResultList. In the Sequence Editor, try executing with the first step
enalbled then again with the first step skipped and breakpoint on the third
step. Use the context viewer to observe where the Limits property is added.
That might help you narrow in on how to specify the property path to
retrieve the value.
If in your code, you see the extra results in the context viewer, then the
problem lies in how you're trying to retrieve the property. If the extra
results aren't there, then something is wrong in how you're specifying them,
most likely a problem with the AddExtraResult call itself.
One other thing to check... its hard to tell from the code you posted... but
make sure you're calling AddExtraResult on the correct execution object and
that you're calling AddExtraResult ~before~ executing the step you want the
result to show up for. Another programmer here made the mistake of assuming
he could call AddExtraResult ~after~ the step executed and TestStand would
"back fill" previously executed steps. Thats not the case. Also, another
mistake he made was expecting the extra results to appear for steps that did
not contain the original step properties. For example, a string comparison
step doesn't have a "Step.Limits.High" property, so if this property is
called out explicitly in AddExtraResult, then the extra result won't appear
in the string comparison's ResultList entry. Thats why you should simply
specify "Step.Limits" to AddExtraResul so the Limits container (whose
contents vary depending on the step type) will get copied to the ResultList
regardless of the step type.
I call AddExtraResult at the beginning of my process model, not in a UI
message handler, so there may be some gotcha from calling it that way. If
all else fails, try adding the AddExtraResult near the beginning of your
process model and see if the extra results appear in each step's ResultList.
Good luck,
Bob Rafuse
Etec Inc.
[Attachment DebugExtraResults.seq, see below]
Attachments:
DebugExtraResults.seq ‏20 KB

How to remove available downloads from the list

how to remove available downloads from the list without it resuming when i open itunes or check for available downloads?

There is not a way to remove them from the list. Just let them download, and then delete them from your library when they are done.

How to select multiple values from the parameters in BI Publisher report

How to select multiple values from the parameter drop down in BI Publisher, and how to handle this mulitple values from the report sql...

Hi kishore,
I have used all the steps as you mentioned in your previous reply....including checking Mulitple Selection Check Box..
Iam able to get the results when I am selecting one value..
and also I am able to handle multiple values the in the query by using IN :Parameter, but seems when we select more than one value from the parameter drop down i think the Bi Publisher is sending the values in concatenated form something ilke
ex: "'ACCOUNT','HR','SALES'" ,and when trying to display the parameters values in the output, its throwing the error as 'missing right paranthesis' ....on the whole do you have any solution which would handle
1.Single selection.
2.Multiple selection.
3.'ALL' Values.
4.Separating the concatenated string into individual strings and dispaly them on the output of the report..etc..in case of Mulitple selection.
Ex:
Concatenated String from BI Publisher:"'ACCOUNT','HR','SALES'"
Expected Output on the report:ACCOUNT,HR,SALES
reply to this would be much appreciated....
thanks,
manoj

How to delete a column from the table control in module pool?

Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar N

hi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control

How can we call Tcode from the Portal?

Senario:
2 BAPIs are developed:
1. The information say... ABC is stored into the table from the portal using the Create BAPI.
2. The change in this ABC information is done using a particular <b>Tcode</b> say xyz. This is a report that calls the change BAPI inside.
The ABC information change will be done either through the Tcode in ECC or through the EP.
3. The Tcode has been created in ECC.
Please let me know who will be responsible to call this tcode from the Portal and how?
I am very very new to EP field so please help...

Hi Jignesh,
If you have already performed these steps and are able to see the iview that you have created. Then I think your issue has been sorted out.
To explain it to you in detail.
Let us suppose, you have created a SAP Transactional iview to access the TCODE-SE38.
Now, as soon as the user clicks on the iview, it will authenticate by asking for the username and password for the backend system...if your SSO is not in place.
Now, if your asking me how to make the iview visible.
You can add assign this SAP transactional iview to a page,a workset or a role and add the corresponding page, workset or role to the user in USER ADMINISTARTION by making it an entry point.
Or to make the iview as an entry point, right click on the iview that you have created and open the properties, then for the option that says entry point choose yes.
I guess that answers your question.
Let me know if you have need any further clarifications on the same.
Regards,
Sandeep

I have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?

I have $8.05 balance on my gift card. I tried to buy an app more expensive than that so i had to add my credit card to the apple account. But I couldn't use the balance from the gift card anymore. How can I select to use it? or did I lose it?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The MAS should use any credits first and then apply the remainder to a listed bank card.

How to check the status from the backend in workflows

Similar Messages

Maybe you are looking for