How to check whether the system has eclipse environment: urgent

Hi gurus
can you please tell me how to check whether my crm system has eclipse envirionment.
Thanks
shashi

There is no way to check whether a system is used productively or not, I believe what you mean is checking a client is productive or not in an ABAP-stack based system. Remember although a SAP ABAP system is identified by a SID but from a business perspective the system is recognized by a client, as it is a unique business identity.
Thus, to check whether the client is productive or not in txn SCC4 check the role of the client, it will show you the correct status. The data of SCC4 is stored in table T000, you can also opt to check that.
- Regards, Dibya

Similar Messages

How to check whether the user has a certificate or not?

Hi everyone.
We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
Is there any way to check whether users have a certificate installed on their browsers?
Thanks in advance.
Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
Message was edited by:
advaca

I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
So, yeah - good luck with that
Lee

How to check if the user has only the display authority of a message

hi,
How to check if the user has only the display authority of a message but does not have the change authority for a certain message?
Best regards,

hi blake
though i am an application consultant and for authorisation u need to have help of BASIS person if u r not the one but still i can guide u regarding the same,
Basically Authorization Management
Use
You can use the following authorization objects to control the authorizations for maintaining business partner data:
        Authorization objects for the Business Partner:
             B_BUPA_GRP
             B_BUPA_ATT
             B_BUPA_FDG
             B_BUPA_RLT
Authorization objects for relationships:
             B_BUPR_BZT
             B_BUPR_FDG
In addition, you can assign an authorization group to a business partner in the dialog. The authorization group controls which users may maintain data for this business partner.
You can also define authorizations for fields and field groups using the Business Data Toolset (BDT). Depending on the settings you have made, the system carries out the relevant authorization checks.
In the dialog in the SAP GUI, you can display an overview of the authorizations assigned to you by pressing the button Settings.
For more information on authorization management, see the Implementation Guide (IMG) of the Business Partner, as well as in the Developers Handbook for the BDT under Authorizations.
IntegrationAuthorization management for the Business Partner forms part of the SAP authorization concept.
Prerequisites
You have made the necessary settings in Customizing of the Business Partner under Basic Settings--> -Address Management.
Moving over
AS ABAP Authorization Concept
The ABAP authorization concept protects transactions, programs, and services in SAP systems from unauthorized access. On the basis of the authorization concept, the administrator assigns authorizations to the users that determine which actions a user can execute in the SAP system, after he or she has logged on to the system and authenticated himself or herself.
To access business objects or execute SAP transactions, a user requires corresponding authorizations, as business objects or transactions are protected by authorization objects. The authorizations represent instances of generic authorization objects and are defined depending on the activity and responsibilities of the employee. The authorizations are combined in an authorization profile that is associated with a role. The user administrators then assign the corresponding roles using the user master record, so that the user can use the appropriate transactions for his or her tasks.
Authorization Checks
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
The following actions are subject to authorization checks that are performed before the start of a program or table maintenance and which the SAP applications cannot avoid:
        Starting SAP transactions (authorization object S_TCODE)
        Starting reports (authorization object S_PROGRAM)
        Calling RFC function modules (authorization object S_RFC)
        Table maintenance with generic tools (S_TABU_DIS)
Checking at Program Level with AUTHORITY-CHECK
Applications use the ABAP statement AUTHORITY-CHECK, which is inserted in the source code of the program, to check whether users have the appropriate authorization and whether these authorizations are suitably defined; that is, whether the user administrator has assigned the values required for the fields by the programmer. In this way, you can also protect transactions that are called indirectly by other programs.
AUTHORITY-CHECK searches profiles specified in the user master record to see whether the user has authorization for the authorization object specified in the AUTHORITY-CHECK. If one of the authorizations found matches the required values, the check is successful.
Starting SAP Transactions
When a user starts a transaction, the system performs the following checks:
        The system checks in table TSTC whether the transaction code is valid and whether the system administrator has locked the transaction.
        The system then checks whether the user has authorization to start the transaction.
The SAP system performs the authorization checks every time a user starts a transaction from the menu or by entering a command. Indirectly called transactions are not included in this authorization check. For more complex transactions, which call other transactions, there are additional authorization checks.
             The authorization object S_TCODE (transaction start) contains the field TCD (transaction code). The user must have an authorization with a value for the selected transaction code.
             If an additional authorization is entered using transaction SE93 for the transaction to be started, the user also requires the suitable defined authorization object (TSTA, table TSTCA).
If you create a transaction in transaction SE93, you can assign an additional authorization to this transaction. This is useful, if you want to be able to protect a transaction with a separate authorization. If this is not the case, you should consider using other methods to protect the transaction (such as AUTHORITY-CHECK at program level).
        The system checks whether the transaction code is assigned an authorization object. If so, a check is made that the user has authorization for this authorization object.
The check is not performed in the following cases:
You have deactivated the check of the authorization objects for the transaction (with transaction SU24) using check indicators, that is, you have removed an authorization object entered using transaction SE93. You cannot deactivate the check for objects from the SAP NetWeaver and HR areas.
This can be useful, as a large number of authorization objects are often checked when transactions are executed, since the transaction calls other work areas in the background. In order for these checks to be executed successfully, the user in question must have the appropriate authorizations. This results in some users having more authorization than they strictly need. It also leads to an increased maintenance workload. You can therefore deactivate authorization checks of this type in a targeted manner using transaction SU24.
             You have globally deactivated authorization objects for all transactions with transaction SU24 or transaction SU25.
             So that the entries that you have made with transactions SU24 and SU25 become effective, you must set the profile parameter AUTH/NO_CHECK_IN_SOME_CASES to Y (using transaction RZ10).
All of the above checks must be successful so that the user can start the transaction. Otherwise, the transaction is not called and the system displays an appropriate message.
Starting Report Classes
You can perform additional authorization checks by assigning reports to authorization classes (using report RSCSAUTH). You can, for example, assign all PA* reports to an authorization class for PA (such as PAxxx). If a user wants to start a PA report, he or she requires the appropriate authorization to execute reports in this class.
We do not deliver any predefined report classes. You must decide yourself which reports you want to protect in this way. You can also enter the authorization classes for reports with the maintenance functions for report trees. This method provides a hierarchical approach for assigning authorizations for reports. You can, for example, assign an authorization class to a report node, meaning that all reports at this node automatically belong to this class. This means that you have a more transparent overview of the authorization classes to which the various reports are transported.
You must consider the following:
              After you have assigned reports to authorization classes or have changed assignments, you may have to adjust objects in your authorization concept (such as roles (activity groups), profiles, or user master records).
              There are certain system reports that you cannot assign to any authorization class. These include:
              RSRZLLG0
              STARTMEN (as of SAP R/3 4.0)
              Reports that are called using SUBMIT in a customer exit at logon (such as SUSR0001, ZXUSRU01).
              Authorization assignments for reports are overwritten during an upgrade. After an upgrade, you must therefore restore your customer-specific report authorizations.
Calling RFC Function Modules
When RFC function modules are called by an RFC client program or another system, an authorization check is performed for the authorization object S_RFC in the called system. This check uses the name of the function group to which the function module belongs. You can deactivate this check with parameter auth/rfc_authority_check.
Checking Assignment of Authorization Groups to Tables
You can also assign authorization groups to tables to avoid users accessing tables using general access tools (such as transaction SE16). A user requires not only authorization to execute the tool, but must also have authorization to be permitted to access tables with the relevant group assignments. For this case, we deliver tables with predefined assignments to authorization groups. The assignments are defined in table TDDAT; the checked authorization object is S_TABU_DIS.
You can assign a table to authorization group Z000. (Use transaction SM30 for table TDDAT) A user that wants to access this table must have authorization object S_TABU_DIS in his or her profile with the value Z000 in the field DICBERCLS (authorization group for ABAP Dictionary objects).
please See also:
        SAP Notes 7642, 20534, 23342, 33154, and 67766
guess this info will help you,there is one graphic which actually explain the hierarchy of authorisation,i will find some time out to let u know more info about the authorisation
but if u sit with ur BASIS guy then u can learn lot of things in PFCG
i guess u r a basis guy,then its not a problem
best regards
ashish

How to check Whether the File is in Progress or used by some other resource

Hi All,
I am retrieving a file from the FTP server using Apache commons FTP.
I need to check whether the file is fully retrieved or in progress.
for now i can able to use the file which is partially retrieved. it is not throwing any file sharing exception or i am unable to find whether it is in progress.
How to check whether the file is in progress ? or The file is accessed by some other resource ?
Pls Help me.
Thanks,
J.Kathir

Hi Vamsi,
Explicitly such kind of requirement has not been catered and i dont think you would face a problem because any application that is writing to a file will open the file in the read only mode to any other simultaneous applications so i think your concerns although valid are already taken care off .
In the remote case you still face a problem then as a work around. Tell the FTP administrator to set the property to maximum connections that can be made to ftp as one. I wonder if you have heard of the concept of FTP handle , basically the above workaround is based on that concept itself. This way only one application will be able to write.
The file adapter will wait for its turn and then write the files.
Regards
joel
Edited by: joel trinidade on Jun 26, 2009 11:06 AM

How to judge whether the client has installed AcrobatReader?

How to judge whether the client has installed AcrobatReader?

Hi,
first check the client copy log using scc3->all clients
under target client you can identify which client is generated by client copy.
the remaining client is only created using SCC4 ( exclude 000,001,066 )
regards,
kaushal

R12.1.1 staging complete! How to check whether the stage is Good

Hi Gurusl,
I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
regards,

Hi,
Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
Regards,
Hussein

How to check whether the Application Server directory exits or not

Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.

Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
 l_dpath = p_file+0(l_no).
Validate the directory of the application server
 CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
 EXPORTING
 dir_name = l_dpath
 TABLES
 dir_list = l_i_dlist
 EXCEPTIONS
 invalid_eps_subdir = 1
 sapgparam_failed = 2
 build_directory_failed = 3
 no_authorization = 4
 read_directory_failed = 5
 too_many_read_errors = 6
 empty_directory_list = 7
 OTHERS = 8.
If any problem occurs with the directory then display proper
error message
 IF sy-subrc <> 0.
 Display error message
 MESSAGE e018 WITH 'Problem with directory entered'(008).
 ENDIF. " sy-subrc <> 0
Regards,
Joy.

How to check whether the Application Server file has already been opened?

Hi Experts,
I have a query related to Application Server file. I am using multithreading concept to process the data and write it in to a single file.
For example, I have 4 workprocesses. Each workprocess will process the data and whenever it has a record available it will access the file and write it directly.
Problem is the statements that are written in the workprocess is same and I want to check the status whether the file has been opened or not ?
Thanks in advance!!!
Thanks,
Babu Kilari

Depends on the structure, and whether the data needs to be sorted in some way in the final file.
In any case, I don't think there will be a significant performance difference between using OPEN DATASET again and getting funny with Unix commands.
If you don't need to sort the final file, you can use strings to read, concatenate and write the data even without line-based DO ENDDO loops, this works pretty fast.
I hope we are not talking about GBytes of data
Thomas

Oracle AS Web Cache - How to check whether the request goes throught it ?

Hi,
My application runs on Oracle 10g App Server,
The OracleAS Web Cache is also running
the command opmnctl status shows...
WebCache - Alive
WebCacheAdmin - Alive
Is there any way to check whether the request form the client goes through the Web Cache ?
B'coz when i checked OracleAS Web Cache Administrator UI
The information like Total Requests Served, Cahce Hit , Cache Misses etc are 0 and it does'nt changes...
I have the directive keepAlive as[b] off in httpd.conf, will this have an impact over Web Cache ???
Plz suggest me a way to check whether the request goes through Web Cache or directly to Oracle HTTP Server ??
Deepak.C

Keepalive has no impact on webcache, but it does have a huge impact on performance. So far I found no proper reason to put it off in any production system.
Anyway, logging from webcache and/or apache (ias) should show how requests are going from the client to the AS.

How to check whether MRP run has been executed for a sales order or not

Dear Experts,
In Strategy:20, Make to Order scenario, I have run MRP for sales order in T Code:MD50,
then how can I check whether MRP run has been executed for a sales order or not. Is there any report where I can find some indication?
Thanks and regards,
Vikas

Dear,
In MTO scenario with Planning strategy group 20 in material master .
After sales order is created, Run MRP , then planned order will be created then go to planned order details in MD04 or MD12 you will get sales order number in assigment tab.
or check the Table PLAF field PALTR ,and field name KDAUF its sales order, for all created planned order.
Regards,
R.Brahmankar

How to check whether the vendor invoice was reversed (MR8M & FB08)

hi,
need to check whether the vendor invoice has been reversed. Posting of the vendor invoice as well as its reversal may happen in FI (e.g. FB60 - FB08) and MM (MIRO - MR8M). have developed a custom function based on the values of the fields: stblg, stjah,... (for fb08) and rebzg, rebzj,rebzz (for mr8m) and trans type but not sure this is the right way.
Is there a bapi (e.g. similar to BAPI_ACC_INVOICE_REV_CHECK) , sap function or at least a report to as a sample. Any help appreciated.
Thank you,
victor

Viktor, We have always used the table fields values you have listed to determine if the invoice has been reversed or cancelled...

How to check whether the browser supports cookie using servlet

Hi
I have a servlet that uses session.I want to check whether the browser supports cookie.
Please help me how can i detect this using servlet.
could you please include a sample code
thanks
sabu

You can check whether any cookies were sent in the request to your servlet:
Cookie cookies[] = request.getCookies();
if cookies is not null (cookies != null) then the browser sending you the request suppoerts cookies.
If it is null then you would need to do a little extra work. Basically add a cookie to the response going back to the browser. Then send a redirect back to this same servlet. You then would have to add code to check to see whether the cookie was sent back.
// Servlet named myServlet
String test = request.getParameter("TEST");
Cookie cookies[] = request.getCookies();
if (test == null || !test.equals("TRUE")
if (cookies == null)
response.addCookie("testCookies","testCookies");
response.sendRedirect("myServlet?TEST=TRUE");
else
// cookies were sent in the initial request, so
// browser supports cookies
else
// This is the redirect. Check the for the presence of
// our testCookie
Hope this helps.

How to check if the user has log in when he log in again?

Hi all,
I was wondering how to track if the user has already log in?
When this user using browser A to log in then he try to log in using a new browser, then hw I am I going to know that, and terminate his session?

Hello!
You can try this code if you want that if a user is login at a machine and tries to login from the other, then he can continue his processing at second machine ('cos it will get the high priority) but can not process from the first machine. This code allows to login but only second one will be active.
<jsp:useBean id="monitor1" scope="application" class="java.util.HashMap"/>
if(monitor1.containsKey(num)){
HttpSession oldSession = (HttpSession) monitor1.get(num);
oldSession.invalidate();
monitor1.remove(num);
monitor1.put(num , session);
But if you want to restrict it at the time of second login then u can use any of the techniques discussed above.
aNTUMNIHA

How to check whether an invoice has been paid or not?

Hi,
In FI, how should I check whether an invoice is paid fully and also whether it has any residual item?
And how should I pay an invoice with some residue? Which transaction I should use and what are the steps to do that?
Since I'm new to FI, any guidance will help me a lot...
Thanks,
Priya.

Hi Priya,
you create a posting with residual items as follows:
Incoming payment
1. Start transaction F-28
2. Enter all required information and click on Process open items
3. On the next screen click on the tab Res. items
4. Make sure that only the items that you want to pay are highlighted ((Net amount appears in blue)
5. For each line item enter the residual amount that is still to be paid (Example: you have one invoice over 100 USD and 80 USD are paid, you enter 20 USD, since this is your residual that still needs to be paid)
6. Save
Outgoing payment
1. Start transaction F-53
2-6. is identical to incoming payment
Regards,
Claus

How to check whether the Resultset is empty or not ??

I wanna check whether my Result set is empty or not ( I don't want the no of rows it contains..) i'm using this function...
boolean result=myResultSet.isAfterLast() | myResultSet.isBeforeFirst() ;
if (result == true)
{//Result Set is populated
else
{//ResultSet Blank
Is it ok to do like this ?? Or is there any other functanality to do this, since in big appl..i'm using it more than 10-15 times & it's working fine evrywhere except for one jsp where it is returing TRUE everytime ...
Help Appreciated !!

try,
rs = pstmt.executeQuery();
boolean b = false;
if( b = rs.next() ) {
while( b ) {
//... rs.getXXX( YYY );
b = rs.next();
else {
//...empty rs processing
or,
ResultSet rs = ps.executeQuery();
if(rs.next()) {
do {
System.out.println(rs.getString(1));
} while(rs.next());
} else {
System.out.println('empty result set');
but I usually avoid using do...while although this may be an exception.

How to check whether the system has eclipse environment: urgent

Similar Messages

Maybe you are looking for