How to check whether user login in SNC mode or Non - SNC Mode

Hi
When SNC is enabled system will accept secure network connections. But,It is up to the user to login in SNC mode or NOT.
Can any one let me know How to check whether user login in a SNC mode / Non-SNC mode?. Is it only through SU01?.
Is there any other possibility?. where to check if user login through RFC connections?.
Please correct me if i am wrong.
Regards
Srinivas P.

Hi,
Where to check if user login through RFC connections?
Check T-Code SM04 on every instance. In the column Type you can see what kind of login has been used (GUI, RFC, Plugin, System).
But,It is up to the user to login in SNC mode or NOT.
Depends. Check these [parameters|http://help.sap.com/saphelp_nw04/helpdata/EN/19/164442c1a1c353e10000000a1550b0/content.htm]:
snc/accept_insecure_cpic
snc/accept_insecure_gui
snc/accept_insecure_r3int_rfc
snc/accept_insecure_rfc
Regards,
Sven

Similar Messages

How to check whether User is alreadylogged in or not

Hi..I want to check whether Particular User is already logged in or not ?? I had userid,password and status in my database.
If anybody shows me how to implement it ??
Reggards
Chintan

If you want to prevent multiple logins happening, use a profile on the database server that limits a login to a set number of simultaneous connections.
If you just ant to check which users are logged in, the v$session table will have that information.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to check for user login in a header?

What is a good way to make sure the user has logged in on many web pages? I implement the property and method in the session bean to keep track of whether the user has logged in or not and that's fine. I tried to use a Page Fragment to check if the user is logged in, but Page Fragment does not seem to redirect with getExternalContext().redirect("Login.jsp").
I also tryed to use <jsp:include> to include a header to test for login, but JSF doesn't seem to like me adding that to the page (got error).
Also, is there a good way to prevent the target page to even execute the rowset if the user is not logged in? It seem like the page has to complete all the rowset data binding before being redirected to another page, even if I put the redirection as part of the page initialization. This is difficult because I can't expect all the pages to have query result when the user is not even logged in.
This is very basic web application function but it seems so hard to do with Studio Creator.

One thought though, when I was playing around with that solution I noticed that everything gets filtered.
i.e. images, so maybe you chould place some thing on the page (image) and when it comes through .. do something. I know its not quite as good, because your back to having to put something on each page (or restricted pages).
The images won't be wrong, unlike the URL .. maybe not images maybe something else. good luck
Jonathan

How to check whether the user has a certificate or not?

Hi everyone.
We're currently finishing a web project and the last step is to check whether users accessing the application have a valid certificate or not.
Users with a valid certificate can access all the data. Users without any certificate installed on their browsers may still proceed, but they won't be able to see all data. Please note that the lack of a certificate doesn't mean an error - it's just another use case.
Is there any way to check whether users have a certificate installed on their browsers?
Thanks in advance.
Edit: sorry, I forgot to post some tech details. We're using Struts 1.2 on a Tomcat 5 app server.
Message was edited by:
advaca

I am not sure how Tomcat handles this, but you need to use two-way (mutual authentication) request but not enforce SSL between Tomcat and the client browser. This will make the browser prompt the user for the cert they want to send. Then you'll need to tackle the other part of your problem, getting the correct content displayed depending on whether the user sent a cert or not. I'm even less help there than I was on the first part of your question.
So, yeah - good luck with that
Lee

How to differentiate whether user entered '0' or no value in the parameter?

I need some clarification.On my selection screen I have 4 parameters( P_QTYLL,P_QTYUL,P_AMTLL,P_AMTUL). I have to check the values entered by the user in those fields and I have to display the user entered values in the next screen.My problem is if the user enters '0'(in any of the above fields) means '0' has to displayed in the next screen.But if he enters nothing means then nothing has to be displayed in the next screen.My problem is I am checking for '0', against the values(initial,'',space,0) for user entered value.But I am unable to differentiate the '0' and nothing(no value) even though I checked against the values(initial,'',space,'0').All the 4 conditions are treating both the '0' and 'novalue' the same.How to differentiate whether user entered '0' or entered nothing(no value).
for example below is my code
IF P_QTYLL EQ 0.
P_QTY_LL = P_QTYLL.
ENDIF.
IF P_QTYUL EQ 0.
P_QTY_UL = P_QTYUL.
ENDIF.
IF P_AMTLL EQ 0.
P_AMTLL_S = 0.
ENDIF.
IF P_AMTUL EQ 0.
P_AMTUL_S = 0.
ENDIF.
IF P_QTYLL EQ ''.
P_QTY_LL = ' '.
ENDIF.
IF P_QTYUL EQ ' '.
P_QTY_UL = ' '.
ENDIF.
IF P_AMTLL EQ ' '.
P_AMTLL_S = ' '.
ENDIF.
IF P_AMTUL EQ ' '.
P_AMTUL_S = ' '.
ENDIF.
LIKE THE ABOVE I checked against the values space,initial.But using those I am not getting any difference for no value and '0' .All the four values(space,initial,'0','') are treating both the '0' and no value in the same way.
Thanks,
Balaji

hi,
you said your teamlead doesn't want the type to be changed to 'C'.so try adding one dummy variable of type c and pass your parameters value to this dummy variable and check dummy variable for value '0'.
eg:
Data DUMMY(11) type c.
DUMMY = P_QTYLL.
IF DUMMY EQ 0.
P_QTY_LL = P_QTYLL.
ENDIF.
DUMMY = P_QTYUL
IF DUMMY EQ 0.
P_QTY_UL = P_QTYUL.
ENDIF.
i think this will help you 2 some extend.

How to check whether system privilege are granted

How to check whether system privileges like 'create session' and other ones are granted for user.
Is there any sys table where this information is available?
Regards - Neuron

Keep in mind select * from dba_sys_privs where grantee = 'some-user' will give you a list of privileges granted to some-user directly. To get complete list of system privs granted to a user both directly an via roles use:
ACCEPT USER PROMPT 'Please enter user name: '
COLUMN PATH FORMAT A90
SET LINESIZE 132
SELECT PATH,
        PRIVILEGE
FROM DBA_SYS_PRIVS,
          SELECT 'DIRECT GRANT' PATH,
                  '&USER' GRANTED_ROLE
            FROM DUAL
         UNION ALL
          SELECT LTRIM(SYS_CONNECT_BY_PATH(GRANTED_ROLE,'->'),'->') PATH,
                  GRANTED_ROLE
            FROM DBA_ROLE_PRIVS
            START WITH GRANTEE = UPPER('&USER')
            CONNECT BY PRIOR GRANTED_ROLE = GRANTEE
WHERE GRANTEE = GRANTED_ROLE
/Now on top of privileges granted to a user, user also has privileges granted to PUBLIC. To get privileges user receives via PUBLIC run the above script specifying PUBLIC at the prompt.
SY.

How to check whether stock cover MRP requirements

Hi Everybody,
Could you please tell me how to check whether stock cover MRP requirements?
My user hope to block GR for PO. Because before GR, customer decrease their order qty. However, it is difficult if buyer decrease the PO qty manually. So, they hope SAP can calculate and block GR.
I know we can add the control in user exit of MIGO. However, I dont know how to check the stock whether cover MRP requirements. anybody can tell me what is the standard function? of course, it is okay if you have other solution such as via standard configurations.
Thank you in advanced.
Regards
Henry

Hello Ravi,
Thank you for your reminder.
We have double confirmed with our client. It is very difficult to using Scheduling Agreements instead of PO. because lots of job have to be changed such as
1. Share our Scheduling Agreements with suppliers on a new system such as Internet.
2. PO release strategy will be put into Scheduling Agreements. I dont know how to to reach this.
Customer may random decrease their order Qty even if they have sent formal order to us. So, we have to block GR for our supplier even if sent PO already. In OEM industry, it is truth already.
Hello BK,
I know in MD04, we can manually list. But, please tell me which function (SE37) can identify. We hope can call the function in user exit of MIGO.
Regards
Henry

How to check whether a file exist in the program folder or not?

Hi guys,
how to check whether a file exist in the program folder or not? Let is say i recieve a file name from user then i want to know if the file is there not and act on that base.
abdul

Look at the class java.io.File and the .exists() method:
http://java.sun.com/j2se/1.4/docs/api/java/io/File.html

How to check SSO user from database?

Hi:
I've posted this topic in Forms forum:
How to check SSO user from database?
then as I've been told, it's better to post it here, so ...... here is the question:
I'm writing a "before delete trigger" to insert into log table before delete. Is there a way that I know from database the current SSO user when SSO users share one database user?
Just like in Oracle Application Express there is v('APP_USER') to know the current user.
Saad,

End users are manipulating data through Oracle Forms(and SSO through portal) and the thing I need is to trace the SSO username from database without modifying forms, I mean purely from database taking into consideration that SSO users are sharing one database user. Is it possible?
Saad,

R12.1.1 staging complete! How to check whether the stage is Good

Hi Gurusl,
I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
regards,

Hi,
Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
Regards,
Hussein

How to check whether transport path exist between two systems in sld??

Hi,
I have two systems namely 'A' and 'B' and created business systems for both of them.Then i created transport path between the two systems.How i check whether what i have done is right in SLD.

<b>WRT to CMS</b>
am not sure with this but u can try:
1. Start CMS: http://<host>:<J2EE Engine http port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms.
2. Goto lansdscape configurator and check there
Message was edited by:
Prabhu S

How to check whether follow on document is created for sc or po,is there any table or fm available?

How to check whether follow on document is created for sc or po,is there any table or fm available?

Hello Venu
Check FM: BBP_PD_SC_GETDETAIL and BBP_PD_PO_GETDETAIL table E_HEADER_REL
Check this: SRM Shopping cart and PO tables link
Regards

How to check whether there r new txt files in a folder n file creation date

How to check whether there r new text files in a specified folder and what is the date of creation of the text file.........?

Hi
I have been searching for a solution to find the date of creation of a file for over 6 months now but haven't found it. So I presume that it is not possible though I havent found any authentication of my assumption in any document.
Cheers!
Shailesh

How to check the user hits to the sites (most often,frequently used sites) in sharepoint 2010?

HI,
How to check the user hits to the sites (most often,frequently used sites) in sharepoint 2010?
could you please help on the above?

Hello Sudhir muvva,
Just to be sure, the default Web Analytics reports don't meet your requirements?
http://blogs.msdn.com/b/ecm/archive/2010/03/21/introducing-web-analytics-in-sharepoint-2010.aspx
Does reports have subjects like top pages and number of page views.
- Dennis | Netherlands | Blog |
Twitter

How to check whether calendar is being used in any of the sap application

Hello All,
We are having few factory calendars. However some of the calendar having valid to year 2010. Can you please let me know how to check whether these calendar is being used in any of the sap application/module
kindly reply as early as possible
Regards
Girish

Hi RKS
yesterday BLOG by our SUMMER WANG helps every SRM consultant to debug the PO error
/people/summer.wang/blog/2010/05/11/trouble-shooting-of-srm-po-transfer-error
Good work Summer wang !!
Muthu

How to check whether user login in SNC mode or Non - SNC Mode

Similar Messages

Maybe you are looking for