How to chk Weblogic is running by script

I am going to install BEA WebLogic in silent mode. After install, how do I verify
the install was successful. I want to do this validation/verification process
via a script.Should I programmaticlly open the Admin Console and look for a valid
HTTP Response? Or is there nay better way?

Bhanu,
Refer to the following notes:
Note: 457381.1 - Troubleshooting Tips For Spinning/Hanging F60WEBMX Processes
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=457381.1
Note: 185762.1 - Script: How To Identify The apps User Using The O/S PID For Forms Users In 11i
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=185762.1

Similar Messages

How to prevent Automator's "run shell script" to create fully decomposed forms of my strings ?

I am using Automator's "run shell script" and I am seeing that it outputs fully decomposed forms of my strings.
For example, when I set the action to "echo été" in a service (with "Replace selected text" activated) and run that into a Textwrangler window, I'll get fully decomposed forms that Textwrangler won't understand. But when I simply type that command into Terminal, I get my string in composed form.
The problem is not the display issue, but the fact that if I want to run grep for example in "run shell script", I will not be able to find the proper strings since the forms are different.

Originally I was using $@ to parse a string and get the result pasted by the service. That was a while ago. There, I noticed that some Japanese characters were messed up. Basically all the kana characters that come with voicing markers like が-ga (instead of か-ka) etc. I did not have the time to pursue that issue though.
Then, last night, I found that a colleague of mine had tried to use $@ to feed to a local dictionary application called ding (http://ftp.tu-chemnitz.de/pub/Local/urz/ding/). His problem was with characters that had umlauts. After verifying how he wrote his action I remembered that I had similar issues with Japanese.
Basically his command was "/path/to/ding $@"
That's supposed to use the selected string as an argument to pass to ding, which will launch a Wish application where the string is used as the searched item.
From Terminal, that works a treat. But the exact same line in Automator (with input as argument, not as stdin) messed the composition and the resulting string was not recognized by ding as a match to what it was supposed to match.
So, I tried a few things to get to the core of the issue and found that a simple "echo [accented characters]" was enough to reproduce the difference in string handling between Automator and Terminal. That difference is also reproduced on a number of person's machines.
I have a number of services that basically revolve on "run shell script" actions and involve 3rd party application outputs, preference files etc. so it would not be convenient to show that to you.
I have sent a mail about this issue to the automator list yesterday too:
http://lists.apple.com/archives/Automator-users/2011/Jun/msg00004.html

How to use OEM to run a script against many targets and send result by emai

Is there a way to use OEM to query the RMAN backup against many targets (databases) and have all the results send to you by a single email?
The script is :
SELECT a.instance_name, b.session_key, b.session_recid, b.session_stamp, b.command_id,
b.status, b.start_time, b.time_taken_display, b.input_type,
b.output_device_type, b.input_bytes_display, b.output_bytes_display,
b.output_bytes_per_sec_display
FROM
v$instance a, V$RMAN_BACKUP_JOB_DETAILS b WHERE ( b.start_time > (SYSDATE - 30) ) order
by b.start_time
Thanks.

Are you using a RMAN catalog? If not, you can used UDM's (this will be messy w/o a RMAN catalog) for what you want to do.
What I started out doing was....
You can create a UDM and push that UDM out to the targets you want. The problem with UDM's, is you can only pull 1 or 2values. I started down this same path and wrote a sql to concatenate the data into one value, such as
SELECT '|'||input_type||'|'||status||'|'||start_time||'|'||end_time||'|'||ROUND(elapsed_seconds,2)||'|'||time_taken_display||'|'
FROM v$rman_backup_job_details
WHERE (INPUT_TYPE, START_TIME)
IN
( SELECT input_type, MAX(START_TIME)
FROM v$rman_backup_job_details
GROUP BY INPUT_TYPE
AND INPUT_TYPE = 'DB FULL';
Do not put any warning/critical thresholds in the UDM and just let OEM Agent gather the data and pull it back into the SYSMAN repository.
You can then look at this view, SYSMAN. MGMT$METRIC_DETAILS to find the correct SQL to pull out the data you need. This view is made up of a 4 way union between 4 sql's. Once you find the SQL you need, then you can pull this information out and into a custom table of your own.
Once you have data into another table, you will then have to extract the concatenated string out, parse it out and report on it. This is where I stopped and said there has to be a better way.
I then thought about it and the RMAN catalog has all this, assuming you are using a RMAN Catalog.
I wrote a piece of dynamic sql to loop through the rman catalog to pull this out into a historical table and store the data. Then I can report on it from there. If you have a RMAN catalog, this works much better.
I also use UDM's to use OEM as a data extract tool to pull the number of archivelogs and bytes my databases create on an hourly basis. I pull 2 values, bytes and # of logs. So this works well with UDM's, don't have to concatenate a bunch of values and then parse it back out again.
I push this UDM to all databases, and have it run hourly. Then daily, I extract this information into a custom table and then use analytic functions to determine how much space is needed on the db servers for archivelogs for a 24 hour time frame. This helps with sizing our log destinations and gives us legitimate reports for Storage teams.
I can also build reports on how many archive logs are generated on a daily, weekly, monthly basis per database. Good for analysis and charge back methods.

Autowifi - how should I make it run the scripts??? SOLVED

I have set up autowifi and it works very good!
One problem though: I would like to change the default printer depending on where I am. so I made this setup for autowifi:
# This is the profile
# running without wep
NETWORK="dhcp"
autowifi_connect() {
lpotions -d MFC7820N
cp /etc/resolv.conf.hasthagen /etc/resolv.conf
brscan-skey
autowifi_disconnect() {
brscan-skey -t :
the problem is that it doesn't seem torun these scripts.
what am I doing wrong???
Last edited by nahoj (2008-03-31 16:22:05)

First of all, make sure you have the latest autowifi version. Then, when you connect to a network, monitor your syslog (/var/log/messages.log):
Mar 31 11:01:56 artin autowifi[2483]: Starting autowifi session for interface 'wlan0'
Mar 31 11:02:24 artin autowifi[2483]: Interface 'wlan0' connected to network 'eduroam'
Mar 31 11:02:24 artin autowifi-event[2679]: Using profile 'default'
The last line indicates that the profile 'default' is being used, so the script /etc/autowifi/networks/default will be used. To use a different script, you have to name it exactly like the SSID you connect to. Another possibility is to match the profile in /etc/autowifi/regexp, which might be overkill for your needs.
Can you paste the relevant parts of your syslog?

How get parent path of running shell script

Friends,
I have a bush shell that location is /u01/test/oracle/codes/jobs/test.sh . I run below command in shell get a shell scripts parents path.
SCRIPT_DIR=$(readlink -f $(dirname ${BASH_SOURCE[0]})) .
But return script location as /u01/test/oracle/codes/jobs.
However, I want to return value as /u01/test/oracle/codes for variale.
Any ideal
Thanks

How do you run or invoke the shell script?

Running SQLPLUS script from command prompt on SUN

We are making a migration from VMS to SUN ( SunOS 5.10) and from 9i to 10g. We have encountered an unanticipated problem with running scripts from the command line in SUN(SQLPLUS execution from the command line). All of our packages have a naming convention such as "DM$LOAD.PKB". I know it is a strange naming convention.
The problem is that when the package creation script is run in SQLPLUS at the command prompt SQLPLUS can not open the file.
SQL> @dm$load.pb
SP2-0310: unable to open file "dm$load.pb"
SQL> host ls
dm$load.pkb
SQL>
Setting the escape character does not seem to help.
SQL> set escape '\'
SQL>
SQL> @dm\$load.pb
SP2-0310: unable to open file "dm$load.pb"
SQL>
Unfortunately, we can not rename the scripts. This can be done from a shell script, but our Tech Services refuse to run the SQL scripts from a shell script
Any ideas on how to get SQLPLUS to run the scripts from the SUN command line?

I did not notice that the cut and paste was poor. It should have read
SQL> @dm$load.pkb
SP2-0310: unable to open file "dm$load.pkb"
SQL> host ls
dm$load.pkb
Any ideas will be greatly appreciated.

Reg: How to Run a Script File in WebLogic Server 10.3.3

Hi WebLogic Experts,
In our project we are using WebLogic Serve 10.3.3. I need to run one script file. could you please suggest me where should i need to place that script file in WebLogic Server 10.3.3 and How to run & stop that Script file.?
please experts i waiting for your's reply..
Thanks & Regards,
Induja..

1. You can put a command line into startWebLogic.sh to start your script file.
2. In your proyect you can create a java class to run the script file.
3. You can create a java class to run the script file an setup it like a startup class into weblogic server.
4. You can create a java class to run the script file an setup it like a job scheduler into weblogic server.
In what time you need run this script file?

How can I run a script last?

Hiya,
I have a single backup job running a single dataset. That single dataset has an include statement to include a dataset directory, which holds individual datasets for the several hosts I want to back up, each with potentially different parameters. This works well, the hosts back up in some order (I don't care), everything's happy.
However, what I want to do is add a step on the end of this process to run a report on the admin server after all the backups are complete. That is, to run a script once, last.
If I add an "after backup" command in the dataset, it runs it (as stated in the manual) on the client servers, after every backup, which is no good to me. I've tried creating a separate job and scheduling it at a lower priority a few minutes later than the backup job, but that seems to just run when it feels like it, I presume because there aren't any conflicts so why shouldn't it?
Can anyone advise how I should be doing this?
Related question... I've tried putting an "after backup" step on the Catalog backup job, but that appears to get run twice (I presume because there are two "include" steps in the catalog dataset)! Is this expected? How can I get it to just run once, after the catalog backup is complete?
Thanks,
David.

Thanks Donna, but... no. It didn't work.
We've actually purchased a license for OSB, so I've fired this question at our official support channel now, and they came back with the same answer at the same time (are you the Oracle techie looking at my problem, by any chance?). For the record here's (with some tweaks for readability in this context) what I've sent back in response to that article.
From the article, I thought perhaps the following might do the trick:
include dataset /Hosts {
after backup optional "/usr/local/osb/pre-n-post after-fsd-hosts mail"
But, from the log:
2010/11/05.07:26:58 trouble parsing dataset in FSdaily line 1 - open brace appears where not allowed (OB dataset mgr)
"010/11/05.07:26:58 offending line is "include dataset /Hosts {
2010/11/05.07:26:58 trouble parsing dataset in FSdaily line 3 - bad nesting (OB dataset mgr)
"010/11/05.07:26:58 offending line is "}
So it appears I’m not actually allowed to do that. I don’t understand why that would be.
The only other idea I have is to include a dummy backup step, backing up something really small (because OSB won’t let you run a backup without backing anything up - sigh!), tack a script onto that, and hope like heck OSB decides that it should run that last. All the documentation I’ve read gives the impression that datasets are all about scope, not order, so I’m not altogether confident that this will work. In any case, it seems a pretty kludgy way of doing it! And, given the next paragraph below, I’m not all that sure it’ll work in any case.
My idea of scheduling a catalog backup for five minutes later than the client backups, with a lower priority, so that it runs when the client backups finish, also has a flaw - if I use two tape drives in parallel, it runs the catalog job in parallel with the last client job, which is completely useless. I want to put on the end of the tape a backup of the catalog as at just after the client backups, so that in the case of a disaster I can restore that and I’ll be good to restore everything else.
In addition to being completely useless for the purposes of putting an “after” catalog backup on the end of the tape, it’s also completely useless for the purposes of running a script last - I tried the following:
include catalog {
after backup optional "/usr/local/osb/pre-n-post after-catalog mail"
This ran the pre-n-post script twice, once for each component of the catalog, which is altogether not what I want it to do.
I can’t think of any way to achieve a catalog backup on the end of the script except for scheduling it for some time later and hoping the dataset backups always finish by then. Ugly.
The only way I can think to achieve the run-a-script-last is to munge all the datasets together into one humongous dataset file, and do stuff as in the article to try to bend OSB to my will (again, hoping that OSB obeys the order of statements in the dataset). Which, when I’m given the ability to use “include dataset /Hosts” to make it easy to maintain, seems a bit of a mean trick to pull on me. And, again, with two tape drives available I’m not at all sure it’ll work in any case.
I'll post further results as they come to light...
David.

How to run a script on Oracle server from isqlplus

Hi I am trying to run a script on my workstation from Oracle server through isqlplus workarea. I entered following command and get the following error. i have enabled isqlplus URL by editing web.xml file already. Can please someone help how to run the script?
@http://myaixserver.com:5560/scripts/Databasestartupstages.sql;
SP2-0920: HTTP error 'page not found (505)' on attempt to open URL

So far, you haven't specified your rdbms version and isqlplus behaved differently on a 9iR1, 9iR2 from the one release on 10gR1/R2. on 9i it was a servlet based on a JServ servlet executor machine, meanwhile on 10g it is a J2EE compliant application deployed on an OC4J container, so configuration is different.
You may want to take a look at these references -->
* Starting iSQL*Plus from a URL
* Creating Reports using iSQL*Plus
~ Madrid

Applescript: How to run a script once upon logon for multiple users

I'm deploying a NetRestore image to about 150 Macs which will be using Active Directory and I've designed a custom default user for each new user. However, our system requires a specialized certificate that has to be installed on the local login.keychain for each user otherwise network connectivity is impacted.
I've tried to use the security command through Terminal to install the certificate, but no matter what combination of commands, I cannot seem to get that to work properly even with an already-created user. While it will often say it's installed, the cert will not actually show up in the login keychain in Keychain Access. And the network connectivity is still impacted.
So instead, I created a brief AppleScript that just gives the user brief instructions to click "Add" on the prompt for which Keychain to add the cert and then "Always Trust" for the "This cert is not verified" prompt. Then it launches Keychain Access. Originally, I was going to have it actually click the buttons for the user, but I realized trying to get the whole Accessibility apps and assitive devices to work on every new user would be a nightmare.
I created the script on another 10.9 Mac using Automator to make it an actual application. I've used the instructions in OS X: Using AppleScript with Accessibility and Security features in Mavericks to sign it and I'm using root to move it from its network location into the Applications folder. I've adjusted the permissions to allow all Admin users to r/w (along with everyone else). To the root user, it shows as a usable application, but every other user on the Mac sees it as damaged/incomplete.
What I want to do is add it to the default Login Items, so I can run the final AppleScript command to simply remove the login items listing. That way I don't need to worry about it running again, but it's still available for the next user to sign onto the deployed Mac.
I know it's a little convoluted, but this is the final piece to the NetRestore deployment I've been working on for months. Any suggestions on how to make this work (or even a completely different solution) would be greatly appreciated.
Here was the original shell script in case you're curious.
#!/bin/bash
## Prompt for current user admin for use in Certificate Install
while :; do # Loop until valid input is entered or Cancel is pressed.
    localpass=$(osascript -e 'Tell application "System Events" to display dialog "Enter your password for Lync Setup:" default answer "" with hidden answer' -e 'text returned of result' 2>/dev/null)
    if (( $? )); then exit 1; fi # Abort, if user pressed Cancel.
    localpass=$(echo -n "$localpass" | sed 's/^ *//' | sed 's/ *$//') # Trim leading and trailing whitespace.
    if [[ -z "$localpass" ]]; then
        # The user left the password field blank.
        osascript -e 'Tell application "System Events" to display alert "You must enter the local user password; please try again." as warning' >/dev/null
        # Continue loop to prompt again.
    else
        # Valid input: exit loop and continue.
        break
    fi
done
echo $localpass | sudo security import /'StartupFiles'/bn-virtual.crt ~/Library/Keychain/login.keychain
osascript -e 'tell Application "System Events" to delete every login item whose name is "LyncCert"
And this is the AppleScript itself. (I used the \ to make it easier to read. The first line is actually one complete command)
display dialog "Click OK to start installing Mac Network Certificate." & return & return & \
"In the following prompts, click the 'Add' then 'Always Trust'." & return & return & \
After you have clicked 'Always Trust', quit Keychain Access." default button 1 with title \
"Mac Network Certificate Install"
activate application "Keychain Access"
tell application "Finder" to open POSIX file "/StartupFiles/bn-virtualcar.crt"
tell application "System Events" to delete login item "Lync-AppleScript"
end
Thank you for your help!

I have run into this same issue. Are you trying to run the script one time as a new user logs in or everytime a user logs in?

How Can I run a script to all servers in my servers list

Hi Guys
I have a Servers list:servers.txt , it's including all servers i need to run a powershell script,how can I use the powershell to run a script on those servers? thank you.I just start to learn about powershell.

You can pipe the results of Out-Command to Out-File (or Export-Csv, etc.) I'm not sure what kind of objects you're expecting from this script, so I'll err on the side of caution and use Format-List * in the example:
Invoke-Command -ComputerName $servers -FilePath c:\copy.ps1 |
Format-List -Property * |
Out-File -FilePath $home\Desktop\copy.log

How do I run a script at shut down?

Hi folks,
I wrote a script that runs at login that gets my dynamic IP and creates a simple web page with a link to my local computer address for Personal Web Sharing, and then uploads that web page with the link to my ISP homepage server.
I wrote another script that creates a web page with no link, but contains a message that my home computer is shut down.
This way, my ISP homepage can have a file that either points to my dynamic IP or has a message that my web server is down.
So How do I get the shut down script to run at shut down?
The shutdown script is basically just this to upload an existing html file:
curl -T shutdown_message.html -u userid:password ftp://ftp.web.isp.server.com/
or you can dynamically create an html file with current date and expected date you will be back on-line, or whatever, with some simple perl code.
Thanks.
G3 Desktop, SonnetEncoreZIF G4 1GHz, 768MB, WingsAV-6MB, DVR-106D, 60GB Maxtor Mac OS X (10.4.7) PCI: TempoUltraATA66-120GB Maxtor, 120GB Seagate; TangoUSB/FW; Radeon9200-17"LCD

Thanks, guys. For the most part I think the DSL keeps the same IP except when I power down. My power went out just as I finished my login upload script, so my first test was out of necessity, and it worked. I could set it up as a cron job on my local machine to regularly test the IP and upload the page.
reese, When I have a power loss, or non-planned abnormal shutdown, my web page will be out of sync, unless I use something on the ISP server, so that is a good point. I am not sure what kind of scripts I can run on my ISP web server. I don't know if I can set up a regularly scheduled script, or if it would only respond to requests, then it could perform the test on demand. I need to give that some more study. Good suggestion.
As far as a normal planned shutdown, I thought of one possible work around: to create a script that runs my upload and then executes the shutdown, either by AppleScript or UNIX shutdown command line, not sure which is the most graceful.
Gary, I looked in the /System/Library/StartupItems and found the Apache scripts in there. They have a StartService and StopService methods defined. I think I could use that as a template to create my own, or just add my scripts to the Apache methods. Since basically I want to run something as Apache is started and again when it stops. That may be the most graceful method. As Apache can get shut down when the machine remains on via System Preferences. You solved my problem Gary, but I marked your message as helpful already. Post back again and I'll give you the Solved Star & points.
G3 Desktop, SonnetEncoreZIF G4 1GHz, 768MB, WingsAV-6MB, DVR-106D, 60GB Maxtor Mac OS X (10.4.7) PCI: TempoUltraATA66-120GB Maxtor, 120GB Seagate; TangoUSB/FW; Radeon9200-17"LCD

How to run multiple scripts in sql*plus?

I would like to run 2 scripts in sql*plus, how do I do this? I tried the following, but it won't run.
create table student_new
AS
select *
from student
insert into student_new
(last_name, first_name
values
(Crop, Jenny)
The above are the two scripts I want to run, what am I doing wrong.
Thanks

Do you have a solution to run multiple scripts continuosly, one after the other as one script.
Say I have file1.sql file2.sql, file3.sql.
I want to create a script run.sql, where this will run file1.sql,file2.sql,file3.sql one after other without any one running one after the other like follows:
run.sql should have
begin
@file1.sql
@file2.sql
@file3.sql
dbms_output.put_line(select sysdate from dual);
end;
If I run run.sql all the three scripts should be executed successfully and then display the current time . All these files have update statements(50,000 updates each file).
Very urgetn. Can some one hlpe, please.
Thanks in advance.

How to run a script from Calculation Manager

Hi All,
I would like to know how to run a script made by using Calculation Manager. I have converted a simple rule script which has just one statement(HS.EXP "A#Sales = 100") in "Sub Calculate()" by using FMRulesMigrator.exe and then imported, deployed to an application. when I execute "Calculate" from a Data Grid, the rule didn't take effect to application data. If I load the script by using classic rule editor, it works fine.
Is there anything I have to know to run a rule script which is made by using Calculation Manager?
Thanks in advance.
CY.

Hi,
Refer the following the link for calling logic from new custom buttons using VBA.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f085dd92-a40c-2c10-dcb1-a7c24476b23a
hpe this ll help.
thnks.

How to run Powershell script (function) through Windows Task Schduler ??

Hello All,
i have Powershell script which is created as a function. I have to give parameters to run the script. And it is working fine. Now i want to run this script through windows task scheduler but it is not working. I dont know how to call powershell function
through task scheduler.
From command line i run it like this:
. c:\script\Get-ServiceStatusReport.ps1
dir function:get-service*
Get-ServiceStatusReport -ComputerList C:\script\server.txt -includeService "Exchange","W32Time" -To [email protected] -From [email protected] -SMTPMail mail01.xxx.gov.pk
In windows Task scheduler I am giving this: it runs but i dont receive any output :
Program/Script:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Parameter:
-file ". 'Get-ServiceStatusReport.ps1 -ComputerList C:\script\server.txt -includeService "Exchange","W32Time" -To [email protected] -From [email protected] -SMTPMail mail01.xxx.gov.pk'"
Please HELP !!!

Thanks for the reply:
The script is already saved as Get-ServiceStatusReport.ps1 .
On powershell it does not run like .\Get-ServiceStatusReport.ps1 (parameter).
But i have to call it as function:
Like this:
Get-ServiceStatusReport -ComputerList C:\script\server.txt -includeService "Exchange","W32Time" -To [email protected] -From [email protected] -SMTPMail mail01.xxx.gov.pk
As you said:
I tried to run it like this:
Program/Script:
C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Parameter:
-file "c:\script\Get-ServiceStatusReport.ps1 -ComputerList C:\script\server.txt -includeService "Exchange","W32Time" -To [email protected] -From [email protected] -SMTPMail mail01.xxx.gov.pk'"
But its not working , on scheduler its giving error: (0xFFFD0000)
Please HELP !!!
WHOLE SCRIPT:
function Get-ServiceStatusReport
param(
[String]$ComputerList,[String[]]$includeService,[String]$To,[String]$From,[string]$SMTPMail
$script:list = $ComputerList
$ServiceFileName= "c:\ServiceFileName.htm"
New-Item -ItemType file $ServiceFilename -Force
# Function to write the HTML Header to the file
Function writeHtmlHeader
param($fileName)
$date = ( get-date ).ToString('yyyy/MM/dd')
Add-Content $fileName "<html>"
Add-Content $fileName "<head>"
Add-Content $fileName "<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'>"
Add-Content $fileName '<title>Service Status Report </title>'
add-content $fileName '<STYLE TYPE="text/css">'
add-content $fileName ""
add-content $fileName "</style>"
Add-Content $fileName "</head>"
Add-Content $fileName "<body>"
add-content $fileName "<table width='100%'>"
add-content $fileName "<tr bgcolor='#CCCCCC'>"
add-content $fileName "<td colspan='4' height='25' align='center'>"
add-content $fileName "<font face='tahoma' color='#003399' size='4'><strong>Service Stauts Report - $date</strong></font>"
add-content $fileName "</td>"
add-content $fileName "</tr>"
add-content $fileName "</table>"
# Function to write the HTML Header to the file
Function writeTableHeader
param($fileName)
Add-Content $fileName "<tr bgcolor=#CCCCCC>"
Add-Content $fileName "<td width='10%' align='center'>ServerName</td>"
Add-Content $fileName "<td width='50%' align='center'>Service Name</td>"
Add-Content $fileName "<td width='10%' align='center'>status</td>"
Add-Content $fileName "</tr>"
Function writeHtmlFooter
param($fileName)
Add-Content $fileName "</body>"
Add-Content $fileName "</html>"
Function writeDiskInfo
param($filename,$Servername,$name,$Status)
if( $status -eq "Stopped")
Add-Content $fileName "<tr>"
Add-Content $fileName "<td bgcolor='#FF0000' align=left ><b>$servername</td>"
Add-Content $fileName "<td bgcolor='#FF0000' align=left ><b>$name</td>"
Add-Content $fileName "<td bgcolor='#FF0000' align=left ><b>$Status</td>"
Add-Content $fileName "</tr>"
else
Add-Content $fileName "<tr>"
Add-Content $fileName "<td >$servername</td>"
Add-Content $fileName "<td >$name</td>"
Add-Content $fileName "<td >$Status</td>"
Add-Content $fileName "</tr>"
writeHtmlHeader $ServiceFileName
Add-Content $ServiceFileName "<table width='100%'><tbody>"
Add-Content $ServiceFileName "<tr bgcolor='#CCCCCC'>"
Add-Content $ServiceFileName "<td width='100%' align='center' colSpan=3><font face='tahoma' color='#003399' size='2'><strong> Service Details</strong></font></td>"
Add-Content $ServiceFileName "</tr>"
writeTableHeader $ServiceFileName
#Change value of the following parameter as needed
$InlcudeArray=@()
#List of programs to exclude
#$InlcudeArray = $inlcudeService
Foreach($ServerName in (Get-Content $script:list))
$service = Get-Service -ComputerName $servername
if ($Service -ne $NULL)
foreach ($item in $service)
#$item.DisplayName
Foreach($include in $includeService)
write-host $inlcude
if(($item.serviceName).Contains($include) -eq $TRUE)
Write-Host $item.MachineName $item.name $item.Status
writeDiskInfo $ServiceFileName $item.MachineName $item.name $item.Status
Add-Content $ServiceFileName "</table>"
writeHtmlFooter $ServiceFileName
function Validate-IsEmail ([string]$Email)
return $Email -match "^(?("")("".+?""@)|(([0-9a-zA-Z]((\.(?!\.))|[-!#\$%&'\*\+/=\?\^`\{\}\|~\w])*)(?<=[0-9a-zA-Z])@))(?(\[)(\[(\d{1,3}\.){3}\d{1,3}\])|(([0-9a-zA-Z][-\w]*[0-9a-zA-Z]\.)+[a-zA-Z]{2,6}))$"
Function sendEmail
param($from,$to,$subject,$smtphost,$htmlFileName)
[string]$receipients="$to"
$body = Get-Content $htmlFileName
$body = New-Object System.Net.Mail.MailMessage $from, $receipients, $subject, $body
$body.isBodyhtml = $true
$smtpServer = $MailServer
$smtp = new-object Net.Mail.SmtpClient($smtphost)
$validfrom= Validate-IsEmail $from
if($validfrom -eq $TRUE)
$validTo= Validate-IsEmail $to
if($validTo -eq $TRUE)
$smtp.UseDefaultCredentials = $true;
$smtp.Send($body)
write-output "Email Sent!!"
else
write-output "Invalid entries, Try again!!"
$date = ( get-date ).ToString('yyyy/MM/dd')
sendEmail -from $From -to $to -subject "Service Status - $Date" -smtphost $SMTPMail -htmlfilename $ServiceFilename

How to chk Weblogic is running by script

Similar Messages

Maybe you are looking for